---

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K

(Mark One)

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended: December 31, 2014

[   ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _____________ to _____________

Commission File No. 000-54693

LEATT CORPORATION
(Exact name of registrant as specified in its charter)

Nevada	20-2819367
(State or other jurisdiction	(I.R.S. Employer Identification No.)
of incorporation or organization)

50 Kiepersol Drive, Atlas Gardens
Contermanskloof Road,
Durbanville, Western Cape
South Africa, 7441
(Address of Principal Executive Offices; Zip Code)

+(27) 21-557-7257
(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Exchange Act: None

Securities registered pursuant to Section 12(g) of the Exchange Act: Common Stock

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes [   ]      No [X ]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes [   ]      No [X]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes [X]      No [   ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes [X]      No [   ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]

---

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large Accelerated Filer [   ]	Non-Accelerated Filer [   ]	Accelerated Filer [   ]	Smaller reporting company [X]
	(Do not check if a smaller
	reporting company)

Indicate by check mark whether registrant is a shell company (as defined in Rule 12b-2 of the Act).
Yes [   ]      No [X]

As of June 30, 2014 (the last business day of the registrant’s most recently completed second fiscal quarter), the aggregate market value of the shares of the registrant’s common stock held by non-affiliates was approximately $2,609,545. Shares of the registrant’s common stock held by each executive officer and director and by each person who owns 10% or more of the outstanding common stock have been excluded from the calculation in that such persons may be deemed to be affiliates of the registrant. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

Common Stock, $0.001 par value per share: 5,200,623 outstanding as of March 20, 2015.

DOCUMENTS INCORPORATED BY REFERENCE

None.

---

Annual Report on Form 10-K
For the Year Ended December 31, 2014

TABLE OF CONTENTS

PART I
Item 1.	Business	2
Item 1A.	Risk Factors	24
Item 1B.	Unresolved Staff Comments	31
Item 2.	Properties	31
Item 3.	Legal Proceedings	32
Item 4.	Mine Safety Disclosures	33
PART II
Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	33
Item 6.	Selected Financial Data	34
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	34
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	40
Item 8.	Financial Statements and Supplementary Data	41
Item 9.	Changes In and Disagreements with Accountants on Accounting and Financial Disclosure.	41
Item 9A.	Controls and Procedures	41
Item 9B.	Other Information	42
PART III
Item 10.	Directors, Executive Officers and Corporate Governance	42
Item 11.	Executive Compensation	45
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	49
Item 13.	Certain Relationships and Related Transactions, and Director Independence	51
Item 14.	Principal Accounting Fees and Services	52
PART IV
Item 15.	Exhibits, Financial Statement Schedules	52

---

Special Note Regarding Forward Looking Statements

This report contains forward-looking statements that are contained principally in the sections entitled “Our Business,” “Risk Factors,” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” These statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements to be materially different from any future results, performances or achievements expressed or implied by the forward-looking statements. These risks and uncertainties include, but are not limited to, the factors described in the section captioned “Risk Factors” above. In some cases, you can identify forward-looking statements by terms such as “anticipates,” “believes,” “could,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “should,” “would” and similar expressions intended to identify forward-looking statements. Forward-looking statements reflect our current views with respect to future events and are based on assumptions and subject to risks and uncertainties. Given these uncertainties, you should not place undue reliance on these forward-looking statements. These forward-looking statements include, among other things, statements relating to:

• our expectations regarding growth in the motor sports market;
• our expectation regarding increasing demand for protective equipment used in the motor sports market;
• our belief that we will be able to effectively compete with our competitors and increase our market share;
• our expectations with respect to increased revenue growth and our ability to achieve profitability resulting from increases in our production volumes; and
• our future business development, results of operations and financial condition.

Also, forward-looking statements represent our estimates and assumptions only as of the date of this annual report. You should read this annual report and the documents that we reference and filed as exhibits to the annual report completely and with the understanding that our actual future results may be materially different from what we expect. Except as required by law, we assume no obligation to update any forward-looking statements publicly, or to update the reasons actual results could differ materially from those anticipated in any forward-looking statements, even if new information becomes available in the future.

Use of Certain Defined Terms

Except as otherwise indicated by the context, references in this annual report to:

• “Leatt,” “we,” “us,” “our,” the “Registrant” or the “Company” are to the combined business of Leatt Corporation, a Nevada corporation, its South African branch, Leatt SA, and its direct, wholly-owned subsidiaries, Two Eleven, Leatt New Zealand and Three Eleven;
• “Leatt SA” are to the Company’s branch office known as ‘Leatt Corporation (Incorporated in the State of Nevada)’ incorporated under the laws of South Africa with registration number: 2007/032780/10;
• “Leatt USA” are to Leatt USA, LLC, is a Nevada Limited Liability Company;
• “Leatt New Zealand” are to Leatt New Zealand Limited, a New Zealand Company;
• “NZD” are to the legal currency of New Zealand. For all NZD amounts reported, the dollar amount has been calculated on the basis that $1=NZD1.2805 for its December 31, 2014 audited balance sheet.
• “PRC”, and “China” are to the People’s Republic of China;
• “Two Eleven” refers to Two Eleven Distribution, LLC, a California limited liability company;
• “Three Eleven” are to Three Eleven Distribution (Pty) Limited, a South African Company;
• “Securities Act” are to the Securities Act of 1933, as amended, and to “Exchange Act” are to Securities Exchange Act of 1934, as amended;
• “South Africa” are to the Republic of South Africa;
• “U.S. dollar,” “$” and “US$” are to the legal currency of the United States. For all U.S. dollar amounts reported, the dollar amount has been calculated on the basis that $1 = ZAR11.6017 for its December 31, 2014 audited balance sheet;
• “Xceed Holdings” refers to Xceed Holdings cc., a close corporation incorporated under the laws of South Africa, and wholly- owned by The Leatt Family Trust, of which Dr. Christopher J. Leatt, the Company’s chairman, is a Trustee and Beneficiary; and
• “ZAR” refers to the South African Rand, the legal currency of South Africa.

[4]

---

PART I

ITEM 1. BUSINESS

Business Overview

Leatt designs, develops, markets and distributes personal protective equipment for participants in all forms of motor sports and leisure activities, including riders of motorcycles, bicycles, snowmobiles and ATVs, as well as racing car drivers. The Company sells its products to customers worldwide through a global network of distributors and retailers. Leatt also acts as the original equipment manufacturer for neck braces sold by other international brands.

The Company’s flagship products are based on the Leatt-Brace® system, a patented injection molded neck protection system owned by Xceed Holdings, designed to prevent potentially devastating injuries to the cervical spine and neck. The Company has the exclusive global manufacturing, distribution, sale and use rights to the Leatt-Brace®, pursuant to a license agreement between the Company and Xceed Holdings, a company owned and controlled by the Company’s Chairman and founder, Dr. Christopher Leatt. The Company also has the right to use apparatus embodying, employing and containing the Leatt-Brace® technology and has designed, developed, marketed and distributed other personal protective equipment using this technology, as well as its own developed technology, including the Company’s expanding range of body protection products which it markets under the Leatt Protection Range brand.

The Company’s research and development efforts are conducted at its research facilities, located at its executive headquarters in Cape Town, South Africa. The Company employs 5 full-time employees who are dedicated exclusively to research, development, and testing. The Company also utilizes consultants, academic institutions and engineering companies as independent contractors or consultants, from time to time, to assist it with its research and development efforts. Leatt products have been tested and reviewed internally and by external bodies. All Leatt products are compliant with applicable European Union directives, or CE certified, where appropriate. Certain products, such as the MRX PRO Head and Neck Restraint System, have been certified by SFI Foundation (USA) and the Moto GPX was tested by BMW Motorrad (Germany) and reviewed by KTM (Austria). The Company is also in discussions with governing and racing bodies, such as the Fédération Internationale de l'Automobile (FIA), the Fédération Internationale de Motocyclisme (FIM) and the National Association for Stock Car Auto Racing (NASCAR), to have the Leatt-Brace® accredited by these bodies.

Our products are manufactured in China under outsource manufacturing arrangements with third-party manufacturers located there. The Company utilizes outside consultants and its own employees to ensure the quality of its products through regular on-site product inspections. Products purchased through international sales are usually shipped directly from our manufacturers’ warehouses or points of dispatch to customers or their import agents.

Leatt earns revenues through the sale of its products through approximately 60 distributors worldwide, who in turn sell its products to retailers. Leatt distributors are required to follow certain standard business terms and guidelines for the sale and distribution of Leatt products. Two Eleven and Leatt SA directly distribute Leatt products to retailers in the United States and South Africa, respectively.

Our Corporate History and Structure

We were incorporated in the State of Nevada on March 11, 2005 under the name Treadzone, Inc. Until March 2006, we were a shell company with little or no operations. Effective as of March 1, 2006, we acquired the exclusive global manufacturing, distribution, sale and use rights to the Leatt-Brace®, pursuant to a license agreement between the Company and Xceed Holdings, a company owned and controlled by the Company’s Chairman and founder, Dr. Christopher Leatt. On May 25, 2005, we changed our name to Leatt Corporation in connection with our anticipated acquisition of the Leatt-Brace® rights.

Leatt South Africa

The Company conducts business in South Africa as a foreign registered branch known as ‘Leatt Corporation (Incorporated in the State of Nevada)’ registered under the laws of South Africa with registration number: 2007/032780/10. Based in Cape Town, South Africa, Leatt SA was formed on November 14, 2007, for conducting the Company’s business and operations in South Africa. Our corporate headquarters and our research and development efforts are based at Leatt SA.

[5]

---

Establishment of Two Eleven, Three Eleven and Leatt USA

On August 17, 2007, the Company established Two Eleven Distribution, a California limited liability company, as its wholly-owned subsidiary. Located in Santa Clarita, California, Two Eleven was formed to serve as the Company’s executive offices in the United States, as well as the exclusive distributor of Leatt® products in the United States.

Southern Palace Investments 409 (Proprietary) Limited, a South African company, was established on October 12, 2007, by the Company, to engage in the manufacturing and distribution of sporting goods and protective gear. The company was inactive until March 2009, when it acquired all intellectual property rights related to an invention entitled the Helmet® from Xceed Holdings, for an aggregate purchase price of ZAR 943,480 (approximately, $90,000) pursuant to a patent assignment agreement, effective as of January 1, 2009, between Xceed Holdings and Southern Palace, doing business as Three Eleven Distribution. On February 10, 2010, Southern Palace formally changed its name to Three Eleven Distribution to reflect its business purpose.

On June 26, 2010, the Company established Leatt USA, LLC, a Nevada Limited Liability Company, as our wholly-owned subsidiary and for the purpose of holding our California subsidiary, Two Eleven Distribution. However, as of the date of this annual report the Company had not moved forward with its original plan and Leatt USA remains dormant.

Wind-up of Leatt New Zealand

On March 13, 2009, the Company established Leatt New Zealand Limited, a New Zealand company, as its wholly-owned subsidiary. Leatt New Zealand served as the exclusive distributor of Leatt-Brace® products in New Zealand, until the fourth quarter of 2011 when it ceased operations and became dormant. The Company has appointed an unrelated third party distributor to distribute its products in the New Zealand market.

Settlement Agreement

As consideration for their founding of the Company’s operations in South Africa, we agreed to issue 20,000,000 shares of our common stock, and 19,200,000 shares of our preferred stock to Dr. Leatt, 5,000,000 shares of our common stock and 4,800,000 shares of our preferred stock to Jean-Pierre De Villiers, and 50,000 shares of our common stock to Ervian Jarrett. We issued the common stock to Dr. Leatt, Mr. De Villiers and Ms. Jarrett in accordance with the agreement, but we did not issue any preferred shares to Dr. Leatt or Mr. De Villiers. On September 25, 2008, in settlement of our obligation to issue Dr. Leatt and Mr. De Villiers shares of preferred stock, we entered into a Settlement Agreement with them, pursuant to which they agreed to release us from any and all liability arising out of or related to our failure to satisfy our prior obligation to them, and we issued 16,800,000 shares of our common stock and 2,400,000 shares of our Series A Preferred Stock to Dr. Leatt, and 4,200,000 shares of our common stock and 600,000 shares of our Series A Preferred Stock to Mr. De Villiers. The Series A Preferred Stock entitles Dr. Leatt and Mr. De Villiers to one hundred votes for each share of Series A Preferred Stock held (voting with the common stock as a single class). The Series A Preferred Stock converts into common stock, on a one-for-one basis, has a liquidation preference equal to $0.001 par value per share and is redeemable by us at $0.001 par value per share upon the occurrence of specified events, but it is subject to transfer limitations and it does not entitle Dr. Leatt and Mr. De Villiers to dividends. On September 20, 2012, we effected a 1-for-25 reverse stock split which reduces the foregoing issuances on a 1:25 ratio.

Our Corporate Structure

The following chart reflects our organizational structure as of the date of this annual report.

[6]

---

Our corporate headquarters are located at 50 Kiepersol Drive, Atlas Gardens, Contermanskloof Road, Durbanville, Western Cape, South Africa, 7441. Our telephone number is +(27) 21-557-7257. We maintain a website at www.leatt.com that contains information about our Company, but that information is not incorporated into, or otherwise considered a part of, this annual report.

Our Industry and Market Trends

Off-Road Motorcycle Market

Our products have their roots in the off-road motorcycle market. Our revolutionary neck brace was invented by Dr. Leatt to protect from catastrophic neck injuries after he witnessed the death of a fellow off-road motorcycle rider the weekend after his son’s riding debut. As a result, our original products target participants in off-road cycling activities such as BMX racing and downhill racing. According to a Racer X Illustrated magazine October 2014 reader survey, available at http://mediakit.filterpubs.com/survey, approximately 54% of riders still do not own a neck brace for protection.

The same RacerX survey shows that we had an approximately 63% market share for neck braces and 10.8% of the market share for chest protectors in the U.S. motorcross market, which represents approximately 50% of the world motorcross market. We believe that we have gained our market share, largely due to the innovation and quality of our products, the growth of the market, our increased marketing efforts and our steps to secure our international patents and protect our patents from infringement.

Other Recreational Markets

We also design and sell neck braces for use by participants in other recreational sports such as ATV, go-kart and snowmobile users, race-car drivers and participants in other sports where a full face helmet should be worn. As a result, our overall performance in the market is also affected by the performance of these industries, especially in jurisdictions where the use of helmets are compulsory.

Our Products

The Company designs, develops, distributes and markets protective gear, parts and accessories. The company's flagship protective product is the Leatt-Brace®, a patented neck protection system for sports.

[7]

---

The Leatt-Brace®

The Leatt-Brace® is a prophylactic neck bracing system composed of various combinations of carbon fiber, glass fiber, polycarbonate or Glass Filled Nylon, which was designed to help prevent potentially devastating sports injuries to the cervical spine (neck). The first Leatt–Brace® was designed for motorcycle, high speed motor vehicle and ATV use, where there is little means of protecting the neck in the event of an accident, but the Leatt-Brace® has been designed in such a way as to offer neck protection to all who utilize a crash helmet as a form of protection, including soldiers, law enforcement officers and other professionals whose activities could result in cervical spine injury.

The Company currently markets and sells six models of Leatt-Brace® products which bring the safety benefits of the Leatt-Brace® technology to a large group of sports participants: our GPX model for off- road motorcycle use; our DBX model, for downhill and BMX bicycle use; our SNX model for snowmobile use; our STX model for adventure riders, street commuters and Speedway participants; our Kart model for gokarting; and our Fusion model which incorporates the neck brace with body protection.

The GPX models include the GPX 5.5, which is fully adjustable, the GPX 4.5, which is less adjustable, and the GPX 6.5, which is a full carbon brace. Our DBX models include the DBX 5.5, which are fully adjustable, the DBX 4.5 which are less adjustable, and the DBX 6.5 which is a full carbon brace. Both the GPX and DBX ranges feature a 5.5 Junior neck brace designed for young athletes. The STX models include the STX RR and STX Road, while the SNX model includes the SNX Pilot and SNX Trophy, and the Fusion models include 3.0 version designed for adults and 2.0 version designed for young athletes. The Company offers various versions and colors of these products to appeal to different clients and price points.

The following table sets out the type of neck braces currently sold by the Company:

[8]

---

[9]

---

Leatt Body Armor Range

While we remain committed to the ongoing improvement and enhancement of the Leatt-Brace®, we are also focusing on the development of related and complimentary protection products. We now offer additional protection products, such as chest protectors, that can be worn with or without the Leatt-Brace®, as well as ancillary products such as clothing. Such products have a wider range of uses including activities such as rugby, horseback riding, snowboarding, skiing and any activity where researched technology can be applied to help prevent injury.

In 2010 we launched the Leatt Body Armor Range with the introduction of the Leatt Adventure Chest Protector, a hard shell chest protector. In 2011 we introduced junior protectors, body vests and full body protectors, since then we have extended our range further to include more body protectors and vests, back protectors, elbow guards, knee guards and cooling vest. All our protectors come standard with the Brace-On™ integration system that attaches the protector to the Leatt-Brace® yet permits independent movement of the brace and protector.

In 2014 we expanded our range of body protection to meet the consumers need based on market feedback. We have expanded into new markets by adding a shoulder brace and C-Frame knee brace to this category. We included more products specifically for the youth and children. We have further added two new products which combine back protectors with hydration packs.

The Body Armor Range has seen increasing sales since inception. Revenue derived from Leatt protection products in 2014 was 42% of total revenue, as compared to 38% of revenues in 2013. In November 2011, the Leatt Adventure Chest Protector was awarded a perfect score (10/10) in a product evaluation done on Motocrossgear.com, an industry publication.

[10]

---

The following table sets out the type of products currently sold by the Company:

[11]

---

[12]

---

[13]

---

[14]

---

[15]

---

Other Products, Parts and Accessories

The nature of our product is such that certain components collapse and fail in a controlled mode to help prevent further bodily injury. In light of this, we also provide aftermarket support for users of our products through our global distribution network. Specific parts of the product or the entire product may need to be replaced after a significant impact. Our aftermarket support primarily entails the replacement of worn or damaged parts, as well as sale of accessories, including hats, bags and hydration kits. We also sell clothing and outerwear.

The following table sets out the type of hydration products currently sold by the Company:

[16]

---

Accolades

Leatt-Brace® products have attracted worldwide interest and we have corresponded with global motorsports governing bodies such as the FIM, Motorsport South Africa, NASCAR and the FIA, with motor racing teams such as the KTM Racing Team, with automotive and motorcycle manufacturers, and with global retailers and distributors of protective gear for motor and extreme sports. We are also in discussions with the FIM, NASCAR and the FIA, to have the Leatt-Brace® accredited.

Our Leatt-Brace® and chest protection products have acquired CE certification where necessary to distribute and sell products in the EU countries. The Leatt-Brace® products have won a series of awards and accolades since 2007, including the following:

[17]

---

• Motocross Action: Leatt-Brace GPX awarded 5/5 Star Product Rating (2007) and Decade’s Most Significant Product (awarded by an industry magazine based on comfort, fit and safety)

• Transworld MX: Editors Choice–Leatt Brace Adventure awarded Best New Product of Year (2009) (selected by editors of an industry magazine with no published criteria)

• ISPO Brandnew Awards: Leatt-Brace DBX awarded Best Protection at Bike Expo (2010) (Bike Expo is an annual gathering of industry participants)

• Transworld MX: Leatt GPX Pro Best Product of the Year (2011) (selected by editors of an industry magazine, based on comfort and safety)

• Motocrossgear.com: Perfect Score to New 2012 Leatt-Brace Chest Protector Adventure Pro (selected by an industry website, based on looks, comfort and safety)

• Transworld Motorcross Magazine: Chest Protector Leatt Pro Lite was awarded “Product of the Year” for 2012 (selected by editors of industry magazine based on testing and looks)

• Mountainbike Magazine: The Leatt F4 Hydration System won the Design and Innovation Award for 2015. The product was chosen from over 100 brands and vetted by an international jury featuring top athletes, including Enduro World Series Winner, Nico Lau.

• PPS Moto: This Motocross Product review website awarded the Company the 2014 PPS Moto Protective Gear Company of the Year Award.

We believe that the quality of Leatt-Brace® products has resulted in increased sales since inception. We have sold in excess of 500,000 units of Leatt-Brace® products worldwide to date. Approximately 9% of our 2010 unit sales were from our DBX bicycle brace. This number increased to 17% of unit sales in 2013 and has decreased to 10% of unit sales in 2014. Our STX street brace, which was introduced to the market in 2011, accounted for 2% of unit sales in 2013 and 1% of unit sales in 2014.

Manufacturing

Our products are manufactured in China in accordance with our manufacturing specifications, pursuant to outsource manufacturing arrangements with third-party manufacturers located there. Our third-party manufacturers usually have the capacity to produce more than 120,000 braces per year and have the space to expand such capacity as required. We do not currently have written agreements with these entities but will include any such future written agreement with our periodic filings. We generally offer a 2-year warranty on our products in accordance with EU regulations. Products purchased through international sales are usually shipped directly from our manufacturers’ warehouses or points of dispatch to customers or their import agents.

Upon internal determination of order quantities, we order from these third-party manufacturers by means of issuing a manufacturing purchase order. The purchase price for each such order is negotiated with the manufacturer and then a deposit of between 10 – 30% of the total purchase order value is made with the manufacturer upon receipt of the manufacturer’s invoice reflecting quantities ordered and negotiated price. The standard agreed on lead time from order date to ship-ready date is 70 days, and our usually agreed on shipping terms are FOB (Port). Products purchased through international sales are usually shipped directly from our manufacturers’ warehouses or points of dispatch to customers or their import agents.

During production, we measure the manufacturer’s on-time performance to determine whether to continue our outsource relationship. We utilize outside consultants and our own employees to ensure the quality of our products through regular on-site product inspections. Such quality inspections are conducted in conformance with ISO/IEC 17025 specifications at the manufacturer’s premises and penalties are levied against a manufacturer if any delay in shipment to customers or customer rejection or non-acceptance is caused by quality issues. The balance of the open invoices is paid to the manufacturer six weeks after successful inspection.

[18]

---

Raw Materials and Suppliers

Our products are manufactured from generally available engineering materials, such as thermoset carbon fiber, glass fiber reinforced nylon, high impact polycarbonate resin. The cost of materials used in our products varies depending on the target market for, and the price of, our products. The prices of these raw materials are determined based upon prevailing market conditions and supply and demand and global conditions may impact the supply of these raw materials and adversely affect the supply of our products. We have not experienced any interruptions to our production due to shortage of our raw materials.

Our third-party manufacturers arrange for the purchase of most of the raw materials that are used to manufacture our products and they pay for the cost of such materials. We may occasionally directly source and pay for highly specialized protection materials, such as SaS-tec and WinBoss, for use in the production of our products. These protection materials are freely available. We may also occasionally acquire raw materials on behalf of a third-party manufacturer in order to secure and maintain a specified production capacity. The expenses incurred for such materials for the years ended December 31, 2014 and 2013, were not material and we do not foresee these amounts being material in the near future.

We have implemented certain protocols to check the quality of raw materials used in the production process. Our third-party manufacturers are required to perform prescribed strength testing on critical parts of certain products. In addition, certain materials are tested by our research and development staff at Leatt SA and by independent material laboratories for compliance to manufacturing and material specification.

Our Customers

Leatt earns revenues through the sale of its products to customers worldwide through a global network of distributors and retailers. Leatt also acts as the original equipment manufacturer for neck braces sold by certain international brands. Leatt sells its products directly to distributors in South Africa (through Leatt SA), in the USA (through Two Eleven), and through a network of 60 third-party distributors worldwide. Our distributors are required to follow certain standard business terms and guidelines for the sale and distribution of our products. Two Eleven also sells our products directly to consumers through our online store available at www.leatt.com.

Products purchased through international sales are usually shipped directly from our manufacturers’ warehouses or points of dispatch to customers or their import agents. Revenue and related cost of revenue is recognized at the time of shipment from the manufacturer’s port when shipping terms are Free On Board (FOB) shipping point, Cost and Freight (CFR) or Cost and Insurance to named place (CIP) as legal title and risk of loss to the product pass to the customer.

We generate revenue both in the United States and internationally. For the years ended December 31, 2014 and 2013, annual revenues associated with international customers were $11,025,185 and $9,061,355, or 60% and 61% of total revenue, respectively.

We have derived a significant portion of our revenue from a limited number of customers, however only one of our customers account for more than 10% of our consolidated revenues. For the year ended December 31, 2014, our U.S. revenue was concentrated in one customer that accounted for approximately 13% of annual U.S. revenue, with our largest customer in the U.S. accounting for approximately 13% of our U.S. sales. As of December 31, 2014, $738,780 or 17% of our accounts receivable, was due from this customer.

For the years ended December 31, 2014 and 2013, our international revenue (not including the U.S.) was earned from two and two customers that accounted for approximately 24% and 22% of our annual international revenue for the respective periods, with our largest international customer accounting for approximately 12% and 11% of international sales for each of the respective periods. As of December 31, 2014 and 2013, $699,127 or 16% and $605,077 or 19% of our accounts receivable, respectively, were due from these international customers.

Advertising and Marketing

We first gained market recognition through customer word-of-mouth and later through third-party articles and reviews of the Leatt-Brace® in motorcycle and racing magazines, and unsolicited and unpaid endorsements from current and former celebrity motocross (and other) riders, but we now advertise our products in various motorsport industry magazines and in related online media. We also enhance our image through the sponsorship of sporting events, teams and individuals.

[19]

---

We believe that, as a result of our marketing efforts, and based on our internal marketing estimates, we have approximately 996 distributors and dealers who stock Leatt products in the U. S. and approximately 152 distributors and dealers in South Africa. We expect that the number of our distributors and dealers will also grow as the market segments that we sell to and our product offering grows but we cannot guarantee that this will be the case.

Our advertising and marketing expenses for the years ended December 31, 2014 and 2013 were $1,442,450 and $1,492,086, respectively, representing approximately 8% and 10% of our revenues for each period. The decrease in advertising and marketing expenses during the fiscal year 2014 period was attributable to a change in the Company's advertising focus towards non-print media which has proven to be more cost effective than traditional print media advertising.

Our Growth Strategy

We are committed to growing our business in the coming years. The key elements of our growth strategy are summarized below:

• Regional Distributors. Our product range has attracted the interest of global retailers and distributors of protective gear for motor and extreme sports, as well as automotive and motorcycle manufacturers and racing teams like the KTM teams. The resultant interest and the expected demand for our products have prompted us to change our production and distribution strategy in order to cater to this demand. In November 2007, we established Two Eleven, our wholly owned California subsidiary, to manage and control the distribution of our products, particularly in the United States. We distribute products to international consumers through a network of international distributors who are selected by our management team based on their financial status and creditworthiness, their location in major geographic locations, their marketing and media presence, their portfolio of leading motorcycle brands and accessories, and their reputation among industry players. We are also in discussions with various suppliers of motor sports protective gear in various regions throughout the world, including Europe, Asia, South America and the Middle-East, in an effort to improve our network of distributors and dealers worldwide, with emphasis on emerging markets in the Middle-East and South America. We believe that regional distributors will better promote our products in the designated regions and expand our global customer base.

• OEM Manufacturers. We are seeking to expand our OEM services to other brands utilizing our Intellectual Property rights. With the launch of OEM agreements with other companies with their own established distribution networks, there are opportunities for us to greatly increase our regional distribution footprint globally.

• Industry Accreditation and Endorsements. We are pursuing accreditation and endorsements of our products from global motor sports governing bodies and industry organizations. We are in discussions with governing racing bodies, such as the Commission Internationale de Karting, or CIK, the American Motorcyclist Association, or AMA, the FIM, the FIA, and NASCAR, to have the Leatt-Brace® accredited. We believe that these accreditations and endorsements will increase sales of our products and solidify our position as a leader in safety products. SFI testing is compulsory for neck protection used in automotive racing in the United States, therefore should neck protection be compulsory we believe that such accreditations and endorsements will additionally increase our sales.

• Efforts to Promote Use of Our Products. We intend to promote the military use of our products to foreign governments worldwide, as well as promote the passage of standards and regulations prescribing the use of safety products such as ours by riders in South Africa as well as in other markets where we sell our products. We also intend to pursue large insurance carriers to mandate or incentivize their insured riders and/or drivers to wear safety products such as ours.

• Expanding our Portfolio of Products. We are always looking for opportunities to introduce new products to reach a wider audience and penetrate new markets. This will include extending our product range to include both innovative protection products as well as peripheral or accessory products such as clothing. In the 2015 first quarter our Knee Brace was accepted for registration by both the United States Food and Drug Administration (FDA) and the UK’s Medicine and Healthcare Regulatory Products Agency (MHRA), and our Shoulder Brace was accepted by the FDA, as Class 1 Medical Devices. FDA and MHRA registration will allow us take these products directly to market as medical devices for patients (not just athletes) recuperating from injuries, surgery, muscle tears or strains, dislocations, breaks or fractures. We also launched two additions to our body armor product range, namely helmets and gloves. We expect that our sales of peripheral or accessory products will increase in line with brand awareness.

Our Research and Development Efforts

Our research and development efforts are headed by our Chairman and Founder, Dr. Christopher Leatt, and are conducted at our research facility, or Leatt Lab, located at our executive headquarters in Cape Town, South Africa. The facility houses a team of biomedical engineers and designers who ensure products are scientifically and mechanically sound. This facility features state of the art testing and prototyping equipment and sophisticated simulation models. Leatt also utilizes consultants, academic institutions and engineering companies from time to time to assist us with our research and development efforts.

[20]

---

We believe that the development of new products and new technology is critical to our success. We are continuously working to improve the quality, efficiency and cost-effectiveness of our existing products. All our products have achieved CE certification when necessary. We are working to develop technology to expand our range of products with further innovation, comfort, ergonomics and market appeal. We believe that our scientific and medical approach to product development gives our products a competitive edge.

Our research and development expenses for the fiscal years ended December 31, 2014 and 2013, amounted to $1,222,209 and $1,170,039, respectively. These expenses included salaries for research and development staff as well as other direct product development and research costs.

Competition

We compete with a small number of dominant competitors in the neck brace and body protection market, some of whom have substantially greater financial and other resources than we currently have. According to the October 2014 RacerX survey discussed elsewhere herein and available at http://mediakit.filterpubs.com/survey, our major competitors in the neck brace market is Alpinestars S.p.A and EVS Sports, and our major competitors in the body protection market is Thor Motocross and Fox Racing.

Competition is based on quality, price reputation, industry endorsements and certifications, as well as, on product design, brand names, marketing support and distribution strategies. We believe that our products can be distinguished from the products offered by our competitors due to the fact that our products are innovative, safety tested, versatile, aesthetically appealing, priced competitively and comfortable without compromising quality and performance.

Our Competitive Strengths

We believe that our competitive strengths include the following:

• Intellectual Property. Licensed patented technology allows us to provide a product that cannot easily be duplicated by our competitors. We have invested extensive resources to patent our products worldwide and have taken legal action to protect our intellectual property rights from infringement.

• Diverse Multi-Cultural Skilled Management Team. Our management team is knowledgeable and experienced in the personal protective equipment industry, sports medicine and business development. Our executive corporate management team consists of Mr. Sean Macdonald, Dr. Christopher James Leatt, Mr. Erik Olsson and Mr. Todd Repsher. Mr. Macdonald is our Chief Executive Officer, Chief Financial Officer, President and Director, and is a Chartered Accountant with 9 years experience in the financial and operational aspects of running sports orientated growth companies. Dr. Leatt is our Founder, Chairman and Head of Research and Development, who developed the Leatt-Brace® from his study of the benefits and viability of a neck protection system for helmet clad sport and recreational users. Mr. Olsson is our General Manager and Head of International Distribution and has served as a Sales and Product Manager for various companies in the power sports industry for the past 16 years. Mr. Repsher is our US National Sales Manager, who is an award-winning sales executive with over fifteen years experience in the marketing and sales of sports orientated companies in North America.

• Outsourced Manufacturing. We outsource our manufacturing to third-party manufacturers in order to produce large volumes of our products. The manufacturing process remains subject to our strict quality control guidelines safeguarded by our employees and the third party inspectors who we hire as consultants to ensure that these guidelines are being implemented at the production point. While such manufacturing arrangements pose a risk to our ability to safeguard our property technologies and may lead to increased costs, as discussed under the “Risk Factors” heading in this report, we expect that the increase in expected sales volumes will contribute to a lower production cost per unit and that this will translate to better margins for our distributors and retailers.

• Research, Development, Certification and Marketing Capabilities. We have in-house know how in the areas of product development, testing and accreditation, particularly in the field of personal protective equipment. With the experience and capabilities developed and established in taking our product to market, we believe that we are well positioned to develop, manufacture and market additional products. With our medical and mechanical expertise, demonstrated research and development capabilities, established outsource manufacturing capacity, established brand and our dedicated, loyal and enthusiastic distribution network, we believe that we have the components necessary to bring new successful products to market.

[21]

---

• Industry Accreditation, Testing Standards and Regulations. We are pursuing accreditation and endorsements of our products from global motor sports governing bodies and industry organizations. We have obtained homologations of our products from various global racing authorities where objective standards have been set and we are in discussions with governing racing bodies, such as the FIM, FIA, CIK, and NASCAR, to have the Leatt-Brace® accredited. SFI testing is compulsory for neck protection used in automotive racing in the U. S., therefore any of our competitors will also have to pass the certification testing. Should industry accreditation become compulsory, we would be ahead of our competitors in the market place.

• Brand Recognition. A RacerX survey discussed elsewhere herein shows that, as at October 2014, Leatt had an approximately 63% market share for neck braces. We believe that public recognition of the Leatt® brand drives the sales of our products, regardless of the action of competitors and competitive products. We expect that the reputation of our brand in the market place, particularly our product testing and applicable CE certification, will continue to ensure market acceptance and facilitate market penetration of our new products. In order to bolster and grow the Leatt® brand, stringent quality control and assurance are our highest priority and our ongoing marketing, advertising and public relations efforts continue to stress the quality, safety and innovation of our products.

Our Intellectual Property

We believe that the continued success of our business is dependent on our intellectual property portfolio consisting of globally registered trademarks, design patents and utility patents related to the Leatt-Brace®. Most of these initial intellectual property rights are held by Xceed Holdings, a corporation controlled by our Chairman, Dr. Christopher Leatt and the rest of these rights are held by the Company and Three Eleven Distribution, our South African subsidiary. We license most of our intellectual property from Xceed Holdings, pursuant to a patent and royalty license agreement, or Licensing Agreement, dated March 1, 2006, between the Company and Xceed Holdings. Under the terms of the Licensing Agreement, we are obligated to pay Xceed Holdings 4% of all our revenues from the Leatt-Brace®. In addition, pursuant to a separate license agreement between us and Mr. De Villiers, we are obligated to pay a royalty fee of 1% of all our billed and received sales revenue, in quarterly installments, based on sales of the previous quarter, to a trust that is beneficially owned and controlled by Mr. De Villiers. We also rely on nondisclosure agreements and other methods to protect our intellectual property rights. However, the steps we have taken may be inadequate to prevent the misappropriation of our technology.

The following table lists the patents and designs licensed from Xceed Holdings:

[22]

---

[23]

---

The following table lists our own patents and designs:

[24]

---

____________________
* The Patent Cooperation Treaty, or PCT, is an international agreement for filing patent applications having effect in up to 117 countries. Under the PCT, an inventor can file a single international patent application in one language with one patent office in order to simultaneously seek protection for an invention in up to 117 countries throughout the world.

____________________

Patents applicable to specific products extend for varying periods according to the date of patent application filing or patent grant and the legal term of patents in the various countries where patent protection is obtained. The actual protection afforded by a patent, which can vary from country to country, depends upon the type of patent, the scope of its coverage and the availability of legal remedies in the country. Issued patents or patents based on pending patent applications or any future patent applications may not exclude competitors or may not provide a competitive advantage to us. In addition, patents issued or licensed to us may not be held valid if subsequently challenged and others may claim rights in or ownership of such patents. In addition, the validity and breadth of claims in protective gear technology patents involve complex legal and factual questions and, therefore, the extent of their enforceability and protection is highly uncertain.

The following table lists our licensed and/or registered and pending trademarks:

[25]

---

[26]

---

____________________

* A Community Trade Mark or CTM, is any trademark which is pending registration or has been registered in the European Union as a whole (rather than on a national level within the EU). The CTM system creates a unified trademark registration system in Europe, whereby one registration provides protection by being enforceable in all member states of the EU.

____________________

From time to time, we have had to enforce our intellectual property rights through litigation and we may be required to do so in the future. Reverse engineering, unauthorized copying or other misappropriation of our technologies could enable third parties to benefit from our technologies without paying us. We cannot assure you that our competitors have not developed or will not develop similar products, will not duplicate our products, or will not design around any patents issued to or licensed by us. We believe that a loss of these rights would harm or cause a material disruption to our business and, our corporate strategy is to aggressively take legal action against any violators of our intellectual property rights, regardless of where they may be.

Our Employees

As of December 31, 2014, we employed 40 full-time employees and no part-time employees. The following table sets forth the number of our full-time employees by function as of December 31, 2014.

[27]

---

We are required to pay UIF, or unemployment insurance, for each of our South African employees. We are also required to withhold income taxes for our South African and U.S. based employees. We generally provide health care benefits and other standard benefits to our employees. We do not have any pension or retirement plans for any of our employees.

We believe that we maintain a satisfactory working relationship with our employees and we have not experienced any significant labor disputes or any difficulty in recruiting staff for our operations.

Regulations

The 2012 JOBS Act

We qualify as an “emerging growth company,” as defined in Title I of the Jumpstart Our Business Startups Act of 2012 (the “JOBS Act”). An emerging growth company is defined as an issuer, including a foreign private issuer, with less than $1 billion of total annual gross revenues during the most recently completed fiscal year. The SEC has interpreted “total annual gross revenues” to mean total revenues as presented on the income statement presentation under U.S. GAAP, which for the Company was $18.6 million for the fiscal year ended December 31, 2014. We will retain our status as an emerging growth company until the earlier of: (1) the fifth anniversary of the date we first sell securities pursuant to an IPO registration statement; (2) the last day of the fiscal year in which we first exceed $1 billion in annual gross revenues; (3) the time we become a large accelerated filer (an SEC registered company with a public float of at least $700 million); or (4) the date on which we have issued, within the previous three years, $1 billion of nonconvertible debt, whether issued in a registered or unregistered offering and whether or not it is still outstanding at the determination date.

The JOBS Act provides scaled disclosure provisions for us, including, among other things: (a) permitting us to include only two years of audited financial statements in a registration statement filed under the Securities Act of 1933 for an IPO of common equity securities; (b) allowing us to comply with the smaller reporting company version of Item 402 of Regulation S-K (Executive Compensation); and (c) removing the requirement that our independent registered public accounting firm attest to the effectiveness of our internal control over financial reporting in accordance with Section 404(b) of the Sarbanes-Oxley Act of 2002. The JOBS Act also exempts us from the following additional compensation-related disclosure provisions that were imposed on U.S. public companies pursuant to the Dodd-Frank Act: the advisory “say-on-pay” vote on executive compensation required under Section 14A(a) of the Exchange Act; the Section 14A(b) requirements relating to shareholder advisory votes on golden parachute compensation; the Section 14(i) requirements for disclosure relating to the relationship between executive compensation and financial performance of the issuer; and the requirement of Dodd-Frank Act Section 953(b)(1), which will require disclosure as to the relationship between CEO and median employee pay.

Under Section 102(b)(1) of the JOBS Act, "emerging growth companies" can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. However, we have irrevocably elected not to avail ourselves of this extended transition period for compliance with new or revised accounting standards and, therefore, we will be subject to the same new or revised accounting standards as other public companies that are not "emerging growth companies.”

European Union Directives

All our products are compliant with applicable European Union directives, or CE certified, where appropriate. All Leatt Personal Protective Equipment (PPE) products are CE Certified showing compliance with European Economic Community (EEC) directive 89/686/EEC that imposes mandatory accreditation of all Personal Protective Equipment products offered for sale in the EEC. This includes the Company’s Leatt-Brace® and body protection products.

This means that as a minimum these products must comply with: the basic Health and Safety requirements of the directive; certain chemical innocuousness tests prescribed in EN 340:2003 - Protective clothing – General Requirements; and the requirements relating to usage, care, cleaning, sizing and other information to be supplied with the product. Accordingly, all Leatt-Braces®, chest protectors and body protection products are CE certified. Only our peripheral products such as jackets, clothing, and caps are not covered.

In addition to the minimum requirements the Company complies with the European Standards, or EN (European Norm), specific to certain categories of PPE. An EN is a standard that has been adopted by one of the three recognized European Standardization Organizations (ESOs): CEN, CENELEC or ETSI. It is produced by all interested parties (including manufacturers, users, consumers and regulators of a particular material, product, process or service) through a transparent, open and consensus based process. In the Company’s case these are the applicable EN standards: EN 14021 Stone Shields; EN 1621-1 Limb Protectors; EN 1621-2 Back Protectors; and CE EN1621-3 level 2 impact front Chest Protectors. These standards are more performance related and, among other things, measure the performance of PPE at various intensity levels and under different environmental conditions. They also prescribe product labeling, tests for user comfort and ease of use. Also, where no specific standards exist such as with the brace, the Notifying Body (responsible for CE evaluation and certification).

[28]

---

FDA and MHRA Registration

In the 2015 first quarter our Knee Brace was accepted for registration by both the FDA and the MHRA, and our Shoulder Brace was accepted by the FDA, as Class 1 Medical Devices. FDA and MHRA registration will allow us take these products directly to market as medical devices for patients (not just athletes) recuperating from injuries, surgery, muscle tears or strains, dislocations, breaks or fractures. The Company’s FDA registration included the contract manufacturer of the braces, a Good Manufacturing Practices (GMP) vendor. For the initial registration period, which expires in December 31, 2015, we will be required to maintain logs of complaints or problems, and to provide appropriate labeling for medical uses. We expect to complete the re-registration process prior to its expiration on December 31, 2015. The MHRA registration of the knee brace is open-ended, subject to the Company’s continued monitoring of product performance in the market place and delivery of prompt responses to the MHRA as necessary.

Other Accreditation

We have also obtained certification for certain of our products, such as the MRX head and neck restraint system, by the SFI Foundation (USA), or the SFI. To attain SFI certification, a safety device must, every five years, pass a series of impact sled tests with an instrumented crash test dummy at a SFI accredited test lab, as well as flammability tests on various parts of the safety device. These tests are done according to the SFI38.1 specification that can be found at http://www.sfifoundation.com. SFI 38.1 accreditation is mandatory for any safety device that is used by participants in SFI sanctioned events worldwide. We also voluntarily submitted our Moto GPX neck brace to be tested by the in-house engineers of BMW Motorrad (Germany) and to be reviewed by KTM (Austria). We believe that such testing, while not mandatory, provides validation for our product’s performance.

We are also in discussions with governing and racing bodies, such as the FIA, the FIM and NASCAR, to have the Leatt-Brace® accredited by these bodies. To acquire NASCAR accreditation, the safety device must obtain SFI 38.1 accreditation, discussed above, and be recertified every 5 years. In addition, the safety device must undergo review and a series of NASCAR specific tests by NASCAR’s technical panel to ensure that it meets all the NASCAR safety requirements. NASCAR accreditation is mandatory for any safety device that is used by participants in NASCAR events. To acquire FIA accreditation, the safety device must obtain SFI 38.1 accreditation, discussed above, and be recertified every 5 years. In addition, the device must undergo review by a FIA technical panel, which assesses the device in accordance with FIA standards for frontal head restraint (FHR) systems and conduct more product specific testing if necessary. To achieve FIA standards, the device must pass certain FIA stress tests for the FHR, the tethers and end fittings, and the attachments included on the protective helmet. FIA accreditation is mandatory for any safety device that is used by participants in FIA sanctioned events worldwide. While there is currently no official accreditation for FIM sanctioned events, we have submitted test documents for FIM review. We cannot guarantee that we will secure any of these accreditations.

ITEM 1A. RISK FACTORS

An investment in our common stock involves a high degree of risk. You should carefully consider the risks described below, together with all of the other information included in this report, before making an investment decision. If any of the following risks actually occurs, our business, financial condition or results of operations could suffer. In that case, the trading price of our common stock could decline, and you may lose all or part of your investment. You should read the section entitled “Special Note Regarding Forward-Looking Statements” above for a discussion of what types of statements are forward-looking statements, as well as the significance of such statements in the context of this report.

RISKS RELATED TO OUR BUSINESS

The ongoing global economic turmoil could negatively affect our business, results of operations, and financial condition.

The ongoing turmoil in the global economy, especially in the U.S. and Europe, may have an impact on our business and our financial condition, and we may face challenges if economic conditions do not improve. These economic conditions impact levels of consumer spending, which have deteriorated and may remain depressed for the foreseeable future. If demand for our products fluctuates as a result of these economic conditions or otherwise, our revenue and gross margin could be harmed.

[29]

---

In order to grow at the pace expected by management, we may require additional capital to support our long-term growth strategies. If we are unable to obtain additional capital in future years, we may be unable to proceed with our plans and we may be forced to curtail our operations.

We currently meet our working capital requirements with cash flow provided by our operating activities and we expect to continue doing so for the foreseeable future. However, in the future we may require additional working capital to support our long-term growth strategies, including identifying suitable targets for horizontal or vertical mergers or acquisitions so as to enhance the overall productivity and benefit from economies of scale. If the uncertainty arising out of domestic and global economic conditions and the ongoing tightening of domestic credit markets persist, we may not be able to generate adequate cash flows or obtain adequate levels of additional financing, whether through equity financing, debt financing or other sources. Even if we are able to get additional financing, it might not be on terms that are favorable to the Company. Furthermore, additional financings could result in significant dilution to our earnings per share or the issuance of securities with rights superior to our current outstanding securities, including registration rights. If we are unable to raise additional financing, we may be unable to implement our long-term growth strategies, develop or enhance our products and services, take advantage of future opportunities or respond to competitive pressures on a timely basis, if at all. In addition, a lack of additional financing could force us to substantially curtail operations.

A substantial amount of our sales revenue is derived from sales to a limited number of customers, and our business will suffer if sales to these customers decline.

We have derived a significant portion of our revenue from a limited number of customers. For the year ended December 31, 2014, our U.S. revenue was concentrated in one customer that accounted for approximately 13% of annual U.S. revenue, with our largest customer in the U.S. accounting for approximately 13% of our U.S. sales. As of December 31, 2014, $738,780 or 17% of our accounts receivable, was due from this customer. We do not have long term contractual arrangements or regular negotiation with most of these wholesale customers. The loss of one or more of these customers could damage our business, financial condition and results of operations.

We engage in international sales, which expose us to trade restrictions that could harm our business and competitive position.

For the years ended December 31, 2014 and 2013, annual revenues from product sales to international customers were $11,025,185 and $9,061,355, or 60% and 61% of our total revenue, respectively. As a result, we are subject to risks associated with shipping products across borders, including shipping delays, customs duties, export quotas and other trade restrictions that could have a significant impact on our revenue and profitability. While we have not encountered significant difficulties in connection with the sales of our products in international markets, if we cannot deliver our products on a competitive and timely basis, our relationships with international customers will be damaged and our financial condition could also be harmed. Furthermore, the future imposition of, or significant increases in, the level of custom duties, export quotas or other trade restrictions could have an adverse effect on us. We cannot assure you that the laws of foreign jurisdictions where we sell and seek to sell our products afford similar or any protection of our intellectual property rights as may be available under U.S. laws. We are directly impacted by the political, economic, military and other conditions in the countries where we sell or seek to sell our products.

Significant fluctuations in fuel prices could have an adverse impact on our business and operations.

A significant portion of our revenue is derived from international sales and so significant fluctuations in fuel prices could adversely affect our business and operations. While fluctuations in fuel prices could lead to higher commuter costs which may encourage the increased use of motorcycles and bicycles as alternative modes of transportation and lead to an increase in the market for our protection products, significant fluctuations in world fuel prices could significantly increase the price of shipping or transporting our products which we may not be able to pass on to our customers.

Expansion of our business may put added pressure on our management, financial resources and operational infrastructure impeding our ability to meet any increased demand for our products and possibly hurting our operating results.

Our business plan is to significantly grow our operations to meet anticipated growth in demand for existing products, and by the introduction of new product offerings. Our planned growth includes the construction of several new production lines to be put into operation over the next five years. Growth in our business may place a significant strain on our personnel, management, financial systems and other resources. We may be unable to successfully and rapidly expand sales to potential customers in response to potentially increasing demand or control costs associated with our growth.

[30]

---

To accommodate any such growth and compete effectively, we may need to obtain additional funding to improve information systems, procedures and controls and expand, train, motivate and manage our employees, and such funding may not be available in sufficient quantities, if at all. If we are not able to manage these activities and implement these strategies successfully to expand to meet any increased demand, our operating results could suffer.

We rely on patent and trade secret laws that are complex and difficult to enforce and we may not be able to prevent others from unauthorized use of our intellectual property. If we are not able to adequately secure and protect our patent, trademark and other proprietary rights our business may be materially affected.

The continued success of our business is dependent on our intellectual property portfolio consisting of globally registered trademarks, design patents and utility patents related to the Leatt-Brace®. We also rely on nondisclosure agreements and other methods to protect our intellectual property rights. However, the steps we have taken may be inadequate to prevent the misappropriation of our technology. In addition, the validity and breadth of claims in protective gear technology patents involve complex legal and factual questions and, therefore, the extent of their enforceability and protection is highly uncertain. Issued patents or patents based on pending patent applications or any future patent applications may not exclude competitors or may not provide a competitive advantage to us. In addition, patents issued or licensed to us may not be held valid if subsequently challenged and others may claim rights in or ownership of such patents. Reverse engineering, unauthorized copying or other misappropriation of our technologies could enable third parties to benefit from our technologies without paying us. We cannot assure you that our competitors have not developed or will not develop similar products, will not duplicate our products, or will not design around any patents issued to or licensed by us.

We believe that a loss of these rights would harm or cause a material disruption to our business and, our corporate strategy is to aggressively take legal action against any violators of our intellectual property rights, regardless of where they may be.

We depend on key personnel, and turnover of key employees and senior management could harm our business.

Our future business and results of operations depend in significant part upon the continued contributions of our key technical and senior management personnel, including specifically, Dr. Christopher Leatt, our Chairman, Sean Macdonald, our Chief Executive Officer and President, and Erik Olsson, our International General Manager. They also depend in significant part upon our ability to attract and retain additional qualified management, technical, marketing and sales and support personnel for our operations. To address this risk we have taken out key man insurance on Key Staff members such as Dr. Leatt. However, if we lose a key employee or if a key employee fails to perform in his or her current position, or if we are unable to attract and retain skilled employees as needed, our business could suffer. Significant turnover in our senior management could significantly deplete our institutional knowledge held by our existing senior management team. We depend on the skills and abilities of these key employees, as well as the intellectual property owned by Dr. Leatt, in managing the development, manufacturing, technical, marketing and sales aspects of our business, any part of which could be harmed by further turnover.

We face an inherent business risk of exposure to product liability claims that could have a material adverse effect on our operating results.

Because of the nature of our products, we face an inherent business risk of exposure to product liability claims arising from the claimed failure of our products to prevent the types of personal injury or death against which they are designed to protect. Plaintiffs may also advance other legal theories supporting claims that our products or actions resulted in harm to them. We maintain product liability insurance policies in excess of $1 million with a self-insured retention to attempt to manage this risk worldwide. We are currently defending against 5 such claims which we have a fair expectation will be resolved in our favor. But although we maintain product liability insurance coverage, there can be no absolute assurance that our coverage limits will be sufficient to cover any successful product liability claims made against us now or in the future. Furthermore, our insurance coverage does not include damages which may be assessed against us for willful and/or intentional injury, or for exemplary or punitive damages. Any claim or aggregation of claims substantially in excess of our insurance coverage, or any substantial claim not covered by insurance, could have a material adverse effect on our financial condition and results of operations. These aforementioned claims also have a negative impact on the renewal our product liability insurance policy and the premiums.

We may not be able to adequately finance the significant costs associated with the development of new protective equipment products.

The products in the protective equipment market can change dramatically with new technological advancements. We are currently conducting research and development on new products, which requires a substantial outlay of capital. To remain competitive, we must continue to incur significant costs in product development, equipment, facilities and invest in research and development of new products. These costs may increase, resulting in greater fixed costs and operating expenses.

[31]

---

In addition to research and development costs, we could be required to expend substantial funds for and commit significant resources to the following:

• additional engineering and other technical personnel;
• advanced design, production and test equipment;
• manufacturing services that meet changing customer needs;
• technological changes in manufacturing processes;
• working capital and;
• manufacturing capacity

Our future operating results will depend to a significant extent on our ability to continue to provide new and competitive products that compare favorably on the basis of cost and performance with the design and manufacturing capabilities of competitive third-party technologies. We will need to sufficiently increase our net sales to offset these increased costs, the failure of which would negatively affect our operating results.

We may be exposed to potential risks relating to our internal controls over financial reporting and our ability to have those controls attested to by our independent auditors.

As directed by Section 404 of the Sarbanes-Oxley Act of 2002, or SOX 404, the SEC adopted rules requiring public companies to include a report of management on the company’s internal controls over financial reporting in their annual reports, including Form 10-K. Under current law, we became subject to the requirements of SOX 404 beginning with our annual report for the fiscal year ended December 31, 2012 and since becoming a U.S. public company, we have evaluated our internal control systems in order to allow our management to meet these requirements, including for this annual report for the fiscal year ended December 31, 2014. We can provide no assurance that we will comply with all of the requirements imposed thereby in the coming years. In the event that we ever identify significant deficiencies or material weaknesses in our internal controls that we cannot remediate in a timely manner, investors and others may lose confidence in the reliability of our financial statements.

We are an "emerging growth company," and have availed ourselves of scaled public company reporting requirements and requirements for stockholder approval and advice applicable to emerging growth companies, which could make our common stock less attractive to investors.

We are an "emerging growth company," as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. For as long as we remain an emerging growth company, we may take advantage of certain exemptions from various reporting requirements that are applicable to public companies that are not emerging growth companies, including not being required to comply with the independent auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. We intend to take advantage of these reporting exemptions and requirements of stockholder advisory votes and approvals until we are no longer an emerging growth company.

We could be an "emerging growth company" for up to five years after the first sale of our common equity securities pursuant to an effective registration statement under the Securities Act, which we expect will be pursuant to a Registration Statement on Form S-8 or on Form S-1. However, if certain events occur prior to the end of such five-year period, including if we become a "large accelerated filer," our annual gross revenues exceed $1 billion or we issue more than $1 billion of non-convertible debt in any three year period, we would cease to be an "emerging growth company" prior to the end of such five year period. We cannot predict if investors will find our common stock less attractive if we choose to rely on these exemptions. If some investors find our common stock less attractive as a result of any choice we make to reduce future disclosure, there may be a less active trading market for our common stock and our stock price may be more volatile.

RISKS RELATED TO OUR INDUSTRY

We may not be able to maintain or improve our competitive position because of strong competition in the personal protective equipment industry, and we expect this competition to continue to intensify.

We face competition from other global manufacturers and distributors who provide personal protective equipment to users of motorcycles, ATVs, snowmobiles, motor racing cars and other helmeted sports. Some of our international competitors are larger than we and possess greater name recognition, assets, personnel, sales and financial resources. These entities may be able to respond more quickly to changing market conditions by developing new products and services that meet customer requirements or are otherwise superior to our products and services and may be able to more effectively market their products than we can because they have significantly greater financial, technical and marketing resources than we do. They may also be able to devote greater resources than we can to the development, promotion and sale of their products. Increased competition could require us to reduce our prices, result in our receiving fewer customer orders, and result in our loss of market share. We cannot assure you that we will be able to distinguish ourselves in a competitive market. To the extent that we are unable to successfully compete against existing and future competitors, our business, operating results and financial condition would be materially adversely affected.

[32]

---

If we are unable to develop competitive new products our future results of operations could be adversely affected.

Our future revenue stream depends to a large degree on our ability to utilize our technology in a way that will allow us to offer new types of safety products to a broader client base. We will be required to make investments in research and development in order to continue to develop new products, enhance our products and achieve market acceptance. We may incur problems in the future in innovating and introducing new and innovative products or, if developed, such products may not achieve significant customer acceptance. If we are unable to successfully define, develop and introduce competitive new products or improve on existing ones, our future results of operations would be adversely affected.

The value of our brand and sales of our products could be diminished if we, the individuals who use our products or the sport and activity categories in which or products are used, are associated with negative publicity.

Our success depends on the value of our brand. Our brand could be adversely affected if our public image or reputation were to be tarnished by negative publicity. Many athletes and other public individuals use our products and actions taken by such persons that harm the reputations of activities they participate in could also harm our brand image and result in a material decrease in our revenues and net income, which could have a negative effect on our financial condition and liquidity. In addition, negative publicity resulting from severe injuries or death occurring in the sports or activities in which our products are used and negatively impacts the popularity of such sport or activity, could have a subsequent negative effect on our net sales of products used in that sport or activity.

We may not be able to receive certain industry certifications and accreditation for our products.

We have obtained certification and approvals for certain of our products, including certification of our MRX head and neck restraint system by the SFI, and approval of our new knee brace as a Class 1 medical device by both the U.S. FDA and the UK’s Medicine and Healthcare Regulatory Products Agency (MHRA), and approval of our shoulder brace as a Class 1 medical device by the U.S. FDA. We also voluntarily submitted our Moto GPX neck brace to be tested by the in-house engineers of BMW Motorrad (Germany) and to be reviewed by KTM (Austria). We believe that such testing, while not mandatory, will provide validation for our product’s performance. There is no guarantee that our products will receive SFI certification or meet BMW testing standards.

We are also in discussions with governing and racing bodies, such as the FIA, FIM and NASCAR, to have the Leatt-Brace® accredited by these bodies. To acquire NASCAR accreditation, the safety device must obtain SFI 38.1 accreditation, discussed above, and be recertified every 5 years. In addition, the safety device must undergo review and a series of NASCAR specific tests by NASCAR’s technical panel to ensure that it meets all the NASCAR safety requirements. NASCAR accreditation is mandatory for any safety device that is used by participants in NASCAR events. To acquire FIA accreditation, the safety device must obtain SFI 38.1 accreditation, discussed above, and be recertified every 5 years. In addition, the device must undergo review by a FIA technical panel, which assesses the device in accordance with FIA standards for frontal head restraint (FHR) systems and conduct more product specific testing if necessary. To achieve FIA standards, the device must pass certain FIA stress tests for the FHR, the tethers and end fittings, and the attachments included on the protective helmet. FIA accreditation is mandatory for any safety device that is used by participants in FIA sanctioned events worldwide. While there is currently no official accreditation for FIM sanctioned events, we have submitted test documents for FIM review. We cannot guarantee that we will secure any of these accreditations.

RISKS RELATED TO DOING BUSINESS IN NON-US JURISDICTIONS

We face risks associated with doing business in non-US jurisdictions.

We have affiliates, and our products are manufactured in and distributed from facilities, located in foreign countries, including countries in Asia and South Africa. International operations are subject to certain risks inherent in doing business abroad, including:

• Exposure to political, social and economic instability;
• Expropriation and nationalization;

[33]

---

• Withholding and other taxes on remittances and other payments by subsidiaries;
• Difficulties in enforcement of contract and intellectual property rights;
• Exposure to foreign current exchange rates, interests rates and inflation;
• Investment restrictions or requirements; and
• Export and import restrictions.

We are highly dependent on our foreign affiliates for their production capabilities and increasing our foreign operations and business relationships are important elements of our strategy. As a result, our exposure to the risks described above may be greater in the future. The likelihood of such occurrences and their potential impact on us varies from country to country and are unpredictable.

Our operations and assets in China are subject to significant political and economic uncertainties.

Our products are manufactured and shipped from production facilities in China. If our manufacturing in China is disrupted, our overall capacity could be significantly reduced and sales or profitability could be negatively impacted. Furthermore, changes in PRC laws and regulations, or their interpretation, or the imposition of confiscatory taxation, restrictions on currency conversion, imports and sources of supply, devaluations of currency or the nationalization or other expropriation of private enterprises could have a material adverse effect on our business, results of operations and financial condition. Under its current leadership, the Chinese government has been pursuing economic reform policies that encourage private economic activity and greater economic decentralization. There is no assurance, however, that the Chinese government will continue to pursue these policies, or that it will not significantly alter these policies from time to time without notice.

We may have limited legal recourse under PRC law if disputes arise under our outsource manufacturing arrangements with third parties.

The Chinese government has enacted some laws and regulations dealing with matters such as corporate organization and governance, foreign investment, commerce, taxation and trade. However, their experience in implementing, interpreting and enforcing these laws and regulations is limited, and our ability to enforce commercial claims or to resolve commercial disputes is unpredictable. If our outsource manufacturing arrangements are unsuccessful or other adverse circumstances arise from these arrangements, we face the risk that our third-party manufacturers may dishonor our purchase orders or unwritten arrangements. The resolution of these matters may be subject to the exercise of considerable discretion by agencies of the Chinese government, and forces unrelated to the legal merits of a particular matter or dispute may influence their determination. Any rights we may have to specific performance, or to seek an injunction under PRC law, in either of these cases, are severely limited, and without a means of recourse by virtue of the Chinese legal system, we may be unable to prevent these situations from occurring. The occurrence of any such events could have a material adverse effect on our business, financial condition and results of operations.

Our potential inability to adequately protect our intellectual property during the outsource manufacturing of our products in China could negatively impact our performance.

Our products are manufactured primarily in China through third-party outsource manufacturing arrangements. We rely on our third-party manufacturers to implement customary manufacturer safeguards onsite, such as the use of confidentiality agreements with employees, to protect our proprietary information and technologies during the manufacturing process, however, these safeguards may not effectively prevent unauthorized use of such information and technical knowhow, or prevent such manufacturers from retaining them. The legal regime governing intellectual property rights in China is relatively weak and it is often difficult to create and enforce intellectual property rights or protect trade secrets there. We face risks that our proprietary information may not be afforded the same protection in China as it is in countries with well-developed intellectual property laws, and local laws may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights in China, and failure to obtain or maintain trade secret protection could adversely affect our competitive business position.

We may be exposed to liabilities under the Foreign Corrupt Practices Act and Chinese anti-corruption laws, and any determination that we violated these laws could have a material adverse effect on our business.

We are subject to the Foreign Corrupt Practice Act, or FCPA, and other laws that prohibit improper payments or offers of payments to foreign governments and their officials and political parties by U.S. persons and issuers as defined by the statute, for the purpose of obtaining or retaining business. We have operations and agreements with third parties worldwide and such activities create the risk of unauthorized payments or offers of payments by the employees, consultants, sales agents or distributors of our Company, even though they may not always be subject to our control. It is our policy to implement safeguards to discourage these practices by our employees. However, our existing safeguards and any future improvements may prove to be less than effective, and the employees, consultants, sales agents or distributors of our Company may engage in conduct for which we might be held responsible. Violations of the FCPA or Chinese anti-corruption laws may result in severe criminal or civil sanctions, and we may be subject to other liabilities, which could negatively affect our business, operating results and financial condition. In addition, the U.S. government may seek to hold our Company liable for successor liability in connection with FCPA violations committed by companies in which we invest or that we acquire.

[34]

---

Fluctuations in currency exchange rates could negatively affect our performance.

Unanticipated currency fluctuations in the South African Rand could lead to lower reported consolidated results of operations due to the translation of these currencies into U.S. dollars when we consolidate our financial results. Our research and marketing operations in South Africa utilize South African labor sources. A decrease in the value of the U.S. dollar in relation to the South African Rand could increase our cost of doing business in South Africa.

Your ability to bring an action against us, and those of our officers and directors who are based in South Africa, or to enforce a judgment against us or recover assets in our possession may be difficult since any such action or recovery of assets would be an international matter, involving South African laws and geographic and temporal disparities.

We conduct substantial operations in South Africa through our foreign registered branch and a substantial portion of our assets are located outside of the United States. In addition, all but two of our management personnel reside in South Africa. As a result, it may be difficult or impossible for you to bring an action against us or these individuals in the United States in the event that you believe that your rights have been violated under applicable law or otherwise. Even if an action of this type is successfully brought, the laws of the United States and of South Africa may render a judgment unenforceable.

RISKS RELATING TO OUR COMMON STOCK

There is not now, and there may not ever be, an active market for our common stock and we cannot assure you that the common stock will become liquid or that it will be listed on a securities exchange.

There currently is no active market for our common stock. We plan to list our common stock as soon as practicable. However, we cannot assure you that we will be able to meet the initial listing standards of any stock exchange, or that we will be able to maintain any such listing. Until our common stock is listed on an exchange, we expect that it would be eligible to continue being quoted in the over-the-counter market maintained by the OTC Markets Group Inc. In this venue, however, an investor may find it difficult to obtain accurate quotations as to the market value of the common stock and trading of our common stock may be extremely sporadic. For example, several days may pass before any shares may be traded. A more active market for the common stock may never develop. In addition, if we failed to meet the criteria set forth in SEC regulations, various requirements would be imposed by law on broker-dealers who sell our securities to persons other than established customers and accredited investors. Consequently, such regulations may deter broker-dealers from recommending or selling the common stock, which may further affect its liquidity. This would also make it more difficult for us to raise additional capital.

We are subject to penny stock regulations and restrictions that may affect our ability to sell our securities on the secondary market.

The SEC has adopted regulations that generally define “penny stock” to be an equity security that has a market price of less than $5.00 per share, subject to specific exemptions. The market price of our common stock is less than $5.00 per share and therefore is a “penny stock.” Brokers or dealers effecting transactions in “penny stock” must disclose certain information concerning the transaction, obtain a written agreement from the purchaser and determine that the purchaser is reasonably suitable to purchase the securities. These rules may restrict the ability of brokers or dealers to sell our common stock and may affect your ability to sell shares.

Our holding company structure may limit the payment of dividends.

We have no direct business operations, other than our ownership of our subsidiaries. While we have no immediate intention of paying dividends, should we decide in the future to do so, as a holding company, our ability to pay dividends and meet other obligations depends upon the receipt of dividends or other payments from our operating subsidiaries and other holdings and investments. In addition, our operating subsidiaries, from time to time, may be subject to restrictions on their ability to make distributions to us, including as a result of restrictive covenants in loan agreements, restrictions on the conversion of local currency into U.S. dollars or other hard currency and other regulatory restrictions as discussed below. If we determine that we will pay dividends to the holders of our common stock, we cannot assure that such dividends will be paid on a timely basis. As a result, you will not receive any return on your investment prior to selling your shares in our company and, for the other reasons discussed in this “Risk Factors” section, you may not receive any return on your investment even when you sell your shares in our company and your shares may become worthless. If future dividends are paid in ZAR, fluctuations in the exchange rate for the conversion of ZAR into U.S. dollars may reduce the amount received by U.S. stockholders upon conversion of the dividend payment into U.S. dollars.

[35]

---

The management team collectively has the power to make all major decisions regarding the company without the need to get consent from any stockholder or other person. This discretion could lead to decisions that are not necessarily in the best interests of minority shareholders.

Our management team collectively owns 41.53% of our common stock (including our preferred stock which converts on a one-for-one basis to common stock). Management, therefore, has the power to make all major decisions regarding our affairs, including decisions regarding whether or not to issue stock and for what consideration, whether or not to sell all or substantially all of our assets and for what consideration and whether or not to authorize more stock for issuance or otherwise amend our charter or bylaws. The management team is in a position to elect all of our directors and to dictate all of our policies.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

ITEM 2. PROPERTIES.

Our corporate headquarters are located in a 948 square meter space located at 50 Kiepersol Drive, Atlas Gardens, Contermanskloof Road, Durbanville, Western Cape, South Africa, 7441. Approximately 25% of the space is used by our finance, legal and operations teams, 35% is used for warehousing and South African distribution and the remaining 40% is used by Leatt Lab and our research and development team. We occupy these premises pursuant to a lease agreement, dated December 12, 2014, between Leatt SA and AJ Brutus Investments cc, which expires on December 15, 2016. The lease agreement requires us to pay a monthly rent of $5,037.

Two Eleven, our California subsidiary, leases a 11,301 square foot space which increased to 14,101 square foot on April 1, 2013 in Santa Clarita, California, pursuant to a lease agreement between Two Eleven and Centre Pointe Properties, LLC, dated September 11, 2012. Two Eleven uses approximately 9% of the office space for executive offices and the remaining 91% of the space for warehousing. The lease agreement required an initial monthly base rent of $ 4,583 from November 1, 2012 that increased to $ 9,166 from May 1, 2013 and subsequently increased to $ 9,441 from May 1, 2014 and expires on April 30, 2015.

We believe that all space is in good condition and that the property is adequately insured by the Company.

ITEM 3. LEGAL PROCEEDINGS.

From time to time, we may become involved in various lawsuits and legal proceedings in the ordinary course of our business. Other than as set forth below, we are currently not aware of any legal proceedings the ultimate outcome of which, in our judgment based on information currently available, would have a material adverse affect on our business, financial condition or operating results.

• In September 20, 2012, a lawsuit was filed against the Company and other Defendants in Clark County District Court of Nevada for wrongful death of a motorcycle rider for alleged negligence, product defect, strict product liability, breach of expressed and implied warranties, survival and punitive damages. The plaintiff is seeking special, compensatory, survival and punitive damages, together with prejudgment interest, costs and disbursement of suit, reasonable attorneys’ fees and other relief. This trial has been scheduled to commence January 11, 2016.

• On December 28, 2012, a lawsuit was filed against the Company in Los Angeles Superior Court for wrongful death of a motorcycle rider. The plaintiffs are seeking damages for wrongful death and other relief. The case was timely removed to federal court. Trial is currently scheduled to commence on May 5, 2015. The Company believes that the lawsuit is without merit and will vigorously defend itself.

• In February 2013, a lawsuit was filed against the Company on behalf of a motorcycle rider in Clark County District Court of Nevada for alleged product defect, failure to warn and negligence. The plaintiff is seeking damages, together with interest and costs of bringing the action. Trial is currently scheduled to commence August 3, 2015. The Company believes that the lawsuit is without merit and will vigorously defend itself.

[36]

---

• On November 24, 2014, a lawsuit was filed against the Company and other defendants in the Circuit Court of Eighth Judicial Circuit in and for Alachua County, Florida for strict liability and negligence. The litigation is at an early stage and the Company is in the process of investigating the claim. The Company believes that the lawsuit is without merit and is vigorously defending itself.

• On February 25, 2015, a lawsuit was filed against the Company on behalf of a motorcycle rider in the Northern District Court of Indiana, Lafayette Division for strict liability, breach of warranty, negligence, punitive damages and deceptive and misleading advertising and marketing. The litigation is at an early stage and the Company is in the process of investigating the claim. The company believes that the lawsuit is without merit and intends to vigorously defend itself.

ITEM 4. MINING SAFETY DISCLOSURES.

Not Applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our common stock is quoted on the QB tier of the over-the-counter electronic bulletin board maintained by the OTC Markets Group Inc. under the symbol LEAT. The CUSIP number for our common stock is 522132 10 9.

The following table sets forth, for the periods indicated, the high and low closing prices of our common stock as quoted on the OTC. These prices reflect inter-dealer prices, without retail mark-up, mark-down or commission, and may not represent actual transactions.

		Closing Prices (1)
		High			Low
Year Ended December 31, 2015
1st Quarter (January 1, 2015 to March 20, 2015)	$	3.25		$	1.18
Year Ended December 31, 2014
1st Quarter	$	1.55		$	1.18
2nd Quarter	$	1.02		$	0.70
3rd Quarter	$	1.65		$	0.75
4th Quarter	$	1.55		$	1.18
Year Ended December 31, 2013
1st Quarter	$	0.70		$	0.50
2nd Quarter	$	0.95		$	0.68
3rd Quarter	$	0.92		$	0.48
4th Quarter	$	0.67		$	0.48

(1) The above table sets forth the range of high and low closing prices per share of our common stock as reported by www.quotemedia.com for the periods indicated.

Holders

As of March 20, 2015, there were approximately 225 stockholders of record of our common stock. The number of record holders does not include persons who held our common stock in nominee or “street name” accounts through brokers.

Dividend Policy

We have never declared dividends or paid cash dividends. Our board of directors will make any future decisions regarding dividends. We currently intend to retain and use future earnings for the development and expansion of our business and do not anticipate paying cash dividends in the immediate future.

[37]

---

Our board of directors has complete discretion on whether to pay dividends, subject to the approval of our shareholders. Even if our board of directors decides to pay dividends, the form, frequency and amount will depend upon our future operations and earnings, capital requirements and surplus, general financial condition, contractual restrictions and other factors that the board of directors may deem relevant.

Securities Authorized for Issuance under Equity Compensation Plans

The following table includes the information as of December 31, 2014 for each category of our equity compensation plan:

2011 Equity Incentive Plan (the “2011 Plan”). Equity awards are granted at the discretion of the Board. The size of an award to any individual, including named executive officers, depends in part on individual performance, including the components of our key performance appraisal index described above and any other indicators of the impact that such employee’s productivity may have on stockholder value over time. Other factors include salary level and competitive data. In addition, in determining the awards granted to each named executive officer, the Board considers the future benefits potentially available to the named executive officers from existing awards. We have no program, plan or practice of granting equity awards that coincide with the release by the Company of material non-public information.

Recent Sales of Unregistered Securities

We have not sold any equity securities during 2014 that were not previously disclosed in a quarterly report on Form 10-Q or a current report on Form 8-K that was filed during the period.

Purchases of Equity Securities

No repurchases of our common stock were made during the fourth quarter of 2014.

ITEM 6. SELECTED FINANCIAL DATA.

Not Applicable.

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

The following management’s discussion and analysis should be read in conjunction with our financial statements and the notes thereto and the other financial information appearing elsewhere in this report. In addition to historical information, the following discussion contains certain forward-looking information. See “Special Note Regarding Forward Looking Statements” above for certain information concerning those forward looking statements. Our financial statements are prepared in U.S. dollars and in accordance with U.S. GAAP.

Overview of our Business

We were incorporated in the State of Nevada on March 11, 2005 under the name Treadzone, Inc. We were a shell company with little or no operations until March 1, 2006, when we acquired the exclusive global manufacturing, distribution, sale and use rights to the Leatt-Brace®, pursuant to a license agreement between the Company and Xceed Holdings, a company owned and controlled by the Company’s Chairman and founder, Dr. Christopher Leatt. On May 25, 2005, we changed our name to Leatt Corporation in connection with our anticipated acquisition of the Leatt-Brace® rights. Leatt designs, develops, markets and distributes personal protective equipment for participants in all forms of motor sports and leisure activities, including riders of motorcycles, bicycles, snowmobiles and ATVs, as well as racing car drivers. The Company sells its products to customers worldwide through a global network of distributors and retailers. Leatt also acts as the original equipment manufacturer for neck braces sold by other international brands.

[38]

---

Leatt designs, develops, markets and distributes personal protective equipment for participants in all forms of motor sports and leisure activities, including riders of motorcycles, bicycles, snowmobiles and ATVs, as well as racing car drivers. The Company sells its products to customers worldwide through a global network of distributors and retailers. Leatt also acts as the original equipment manufacturer for neck braces sold by other international brands.

The Company’s flagship products are based on the Leatt-Brace® system, a patented injection molded neck protection system owned by Xceed Holdings, designed to prevent potentially devastating injuries to the cervical spine and neck. The Company has the exclusive global manufacturing, distribution, sale and use rights to the Leatt-Brace®, pursuant to a license agreement between the Company and Xceed Holdings, a company owned and controlled by the Company’s Chairman and founder, Dr. Christopher Leatt. The Company also has the right to use apparatus embodying, employing and containing the Leatt-Brace® technology and has designed, developed, marketed and distributed other personal protective equipment using this technology, as well as its own developed technology, including the Company’s new body protection products which it markets under the Leatt Protection Range brand.

The Company’s research and development efforts are conducted at its research facilities, located at its executive headquarters in Cape Town, South Africa. The Company employs 5 full-time employees who are dedicated exclusively to research, development, and testing. The Company also utilizes consultants, academic institutions and engineering companies as independent contractors or consultants, from time to time, to assist it with its research and development efforts. Leatt products have been tested and reviewed internally and by external bodies. All Leatt products are compliant with applicable European Union directives, or CE certified, where appropriate. Certain products, such as the MRX Head and Neck Restraint system, have been certified by SFI Foundation (USA) and the Moto GPX was tested by BMW Motorrad (Germany) and reviewed by KTM (Austria). The Company is also in discussions with governing and racing bodies, such as the Fédération Internationale de l'Automobile (FIA), the Fédération Internationale de Motocyclisme (FIM) and the National Association for Stock Car Auto Racing (NASCAR), to have the Leatt-Brace® accredited by these bodies.

Our products are manufactured in China under outsource manufacturing arrangements with third-party manufacturers located there. The Company utilizes outside consultants and its own employees to ensure the quality of its products through regular on-site product inspections. Products purchased through international sales are usually shipped directly from our manufacturers’ warehouses or points of dispatch to customers or their import agents.

Leatt earns revenues through the sale of its products through approximately 60 distributors worldwide, who in turn sell its products to retailers. Leatt distributors are required to follow certain standard business terms and guidelines for the sale and distribution of Leatt products. Two Eleven and Leatt SA directly distribute Leatt products to retailers in the United States and South Africa, respectively.

Principal Factors Affecting Our Financial Performance

We believe that the following factors will continue to affect our financial performance:

• Global Economic Fragility – The ongoing turmoil in the global economy, especially in the U.S. and Europe, may have an impact on our business and our financial condition, and we may face challenges if economic conditions do not improve. These economic conditions impact levels of consumer spending, which have deteriorated and may remain depressed for the foreseeable future. If demand for our products fluctuates as a result of these economic conditions or otherwise, our revenue and gross margin could be harmed.

• Fuel Prices – Significant fluctuations in fuel prices could have both a positive and negative effect on our business and operations. A significant portion of our revenue is derived from international sales and significant fluctuations in world fuel prices could significantly increase the price of shipping or transporting our products which we may not be able to pass on to our customers. On the other hand, fluctuations in fuel prices lead to higher commuter costs which may encourage the increased use of motorcycles and bicycles as alternative modes of transportation and lead to an increase in the market for our protection products.

[39]

---

• Product Liability Litigation – We face an inherent business risk of exposure to product liability claims arising from the claimed failure of our products to help prevent the types of personal injury or death against which they are designed to help protect. Therefore we have acquired very costly product liability insurance worldwide. We have not experienced any material uninsured losses due to product liability claims, but it is possible that we could experience material losses in the future. After a two-week trial in the United States District Court for the Northern District of Ohio (Eastern) ending on April 17, 2014, a federal jury returned a defense verdict for the Company in the first Leatt-Brace® product liability lawsuit to be tried in the United States. The plaintiffs in that case had alleged that defective product design and failure to warn had caused a then fifteen year-old motocross rider, to suffer multiple mid-thoracic spine fractures, causing immediate and permanent paraplegia, when he crashed at a relatively low speed on February 13, 2011. When the accident occurred, he was wearing a helmet and other safety gear from several different companies, including the Company's acclaimed Leatt-Brace®. The Company produced evidence at trial showing that his thoracic paraplegia was an unavoidable consequence of his fall, not the result of wearing a Leatt-Brace®, and that the neck brace likely saved his life (or saved him from quadriplegia) by preventing cervical spine injury. Company had maintained from the onset that this and a small handful of other lawsuits are without merit and that it will vigorously defend itself in each case. In this case, the plaintiffs subsequently appealed the court’s decision and the parties reached an amicable settlement. Although we carry product liability insurance, a successful claim brought against us could significantly harm our business and financial condition and have an adverse impact on our ability to renew our product liability insurance or secure new coverage.

• Protection of Intellectual Property – We believe that the continued success of our business is dependent on our intellectual property portfolio consisting of globally registered trademarks, design patents and utility patents related to the Leatt-Brace®. We believe that a loss of these rights would harm or cause a material disruption to our business and, our corporate strategy is to aggressively take legal action against any violators of our intellectual property rights, regardless of where they may be. From time to time, we have had to enforce our intellectual property rights through litigation and we may be required to do so in the future. Such litigation may result in substantial costs and could divert resources and management attention from the operations of our business.

Results of Operations

Year Ended December 31, 2014 compared to the year ended December 31, 2013

The following table summarizes the results of our operations during the years ended December 31, 2014 and 2013 and provides information regarding the dollar and percentage increase or (decrease) from the 2013 year to the 2014 year.

[40]

---

		Fiscal Year Ended December 31,						Percentage
		2014			2013			Increase			Increase
Item								(Decrease)			(Decrease)
REVENUES	$	18,458,928		$	14,891,667		$	3,567,261			24%
COST OF REVENUES		8,636,546			7,158,943		$	1,477,603			21%
GROSS PROFIT		9,822,382			7,732,724		$	2,089,658			27%
PRODUCT ROYALTY INCOME		190,961			953,893		$	(762,932	)		-80%
OPERATING EXPENSES
Salaries and Wages		2,302,115			2,134,815		$	167,300			8%
Commissions and Consulting		581,601			545,846		$	35,755			7%
Professional Fees		1,117,887			1,228,514		$	(110,627	)		-9%
Advertising and Marketing		1,442,450			1,492,086		$	(49,636	)		-3%
Office Rent and Expenses		244,510			256,407		$	(11,897	)		-5%
Research and Development Costs		1,222,209			1,170,039		$	52,170			4%
Bad Debt Expense (Recovery)		75,285			(5,218	)	$	80,503			1543%
General and Administrative		2,081,339			2,097,155		$	(15,816	)		-1%
Depreciation		304,690			334,049		$	(29,359	)		-9%
Total Operating Expenses		9,372,086			9,253,693		$	118,393			1%
INCOME (LOSS) FROM OPERATIONS		641,257			(567,076	)	$	1,208,333			213%
Other Income		10,854			20,020		$	(9,166	)		-46%
INCOME (LOSS) BEFORE INCOME TAXES		652,111			(547,056	)	$	1,199,167			219%
Income Taxes		233,760			(171,880	)	$	405,640			236%
NET INCOME (LOSS)	$	418,351		$	(375,176	)	$	793,527			212%

Revenues – We earn revenues from the sale of our Protective gear comprising of Neck braces, Body armor and Other products, Parts and Accessories. Revenues for the year ended December 31, 2014 were $18.46 million, a 24% increase, compared to revenues of $14.89 million for the year ended December 31, 2013. This increase in revenues is attributable to a $1.4 million increase in neck brace sales, a $2.2 million increase in Body armor sales, which was partially offset by a decrease of $0.07 million in Other Products, Parts and Accessories, respectively, during the year ended December 31, 2014. Changes in prices did not impact the increase in revenues as our selling prices have not fluctuated by any significant level.

The following table sets forth our revenues by product line for the years ended December 31, 2014 and 2013:

		Year Ended December 31,
		2014			% of Revenues			2013			% of Revenues
Neck braces	$	9,799,767			53%		$	8,379,338			56%
Body armor		7,811,511			42%			5,596,738			38%
Other Products, Parts and Accessories		847,650			5%			915,591			6%
	$	18,458,928			100%		$	14,891,667			100%

Sales of our flagship Neck brace accounted for $9.80 million and $8.38 million, or 53% and 56% of our revenues for the years ended December 31, 2014 and 2013, respectively. The 17% increase in Neck brace revenues was primarily due to increased sales volumes of the Company’s Neck brace product line as a result of the successful introduction of the Fusion 2.0 Junior, Fusion 3.0 for adults and 5.5 Neck brace product line in the United States and abroad.

Our Body armor products are comprised of chest protectors, full upper body protectors, upper body protection vests, back protectors, knee braces and knee and elbow guards. Body armor sales accounted for $7.81 million and $5.60 million, or 42% and 38% of our revenues for the years ended December 31, 2014 and 2013, respectively. The 40% increase in Body armor revenues was primarily due to increased sales volume of Body armor products as a result of the successful market acceptance of our C-Frame Knee Brace which was delivered to our customers in the fourth quarter of 2014.

[41]

---

Our Other Products, Parts and Accessories are comprised of aftermarket support items required primarily to replace worn or damaged parts through our global distribution network as well as clothing, outerwear and accessories that include hats, jackets, bags, hydration kits and cooling garments. Other Products, Parts and Accessories sales accounted for $0.85 million and $0.92 million, or 5% and 6% of our revenues for the years ended December 31, 2014 and 2013, respectively. The decrease in our Other Products, Parts and Accessories is primarily due to a 38% decrease in the volume of spare parts sold internationally during the period.

Costs of Revenues and Gross Profit – Cost of revenues for the years ended December 31, 2014 and 2013 were $8.64 and $7.16 million, respectively. Gross Profit for the years ended December 31, 2014 and 2013 were $9.82 million, or 53% of revenues, and $7.73 million, or 52% of revenues, respectively. The increase in gross profit margin was primarily due to increased neck brace sales in the United States and abroad as well as improved Body armor margins as a result of the successful introduction of the C-Frame Knee Brace during the 2014 period. Our management continues to actively monitor and assess all measures that may reduce the cost of the Company's revenues.

Product Royalty Income – Product royalty income is earned on sales to distributors that have royalty agreements in place as well as sales of licensed products by third parties that have licensing agreements in place. Product royalty income for the years ended December 31, 2014 and 2013 were $190,961 and $953,893, respectively. The 80% decrease in product royalty income is primarily due to the inclusion of income derived from a confidential settlement agreement entered into by the Company to resolve an alleged patent infringement claim during the 2013 period that was not repeated in the 2014 period.

Salaries and Wages – Salaries and wages for the years ended December 31, 2014 and 2013 were $2,302,115 and $2,134,815, respectively. This 8% increase in salaries and wages during the 2014 period was primarily due to the employment of additional US sales management and European brand management staff.

Commissions and Consulting Expense– Commissions and consulting expense for the years ended December 31, 2014 and 2013 were $581,601 and $545,846, respectively. This 7% increase in commissions and consulting expenses is primarily the result of increased spending on strategic marketing and public relations activities which are included in consulting expenses.

Professional Fees – Professional fees consist of costs incurred for audit, tax, regulatory filings and quarterly reporting requirements, as well as patent protection and litigation expenses incurred as the Company continues to expand. Professional fees for the years ended December 31, 2014 and 2013 were $1,117,887 and $1,228,514, respectively. The 9% decrease in professional fees is primarily due to decreased spending on patent litigation.

Advertising and Marketing – The Company places paid advertising in various motorsport magazines and online media, and sponsors a number of events, teams and individuals to increase exposure. Advertising and marketing expenses for the years ended December 31, 2014 and 2013 were $1,442,450 and $1,492,086, respectively. This $49,636, or 3%, decrease in advertising and marketing expenditure is due to the Company’s continued use of online marketing campaigns that reach a wider audience and are more cost effective than traditional print campaigns utilized by the company.

Office Rent and Expenses – Office rent and expenses for the years ended December 31, 2014 and 2013 were $244,510 and $256,407, respectively. The 5% decrease in office rent and expenses is primarily the result of the consolidation of additional warehouse space occupied by Two Eleven, our US subsidiary.

Research and Development Costs – These costs include the salaries of staff members that are directly involved in the research and development of protective gear, as well as the direct costs associated with developing these products. Research and development costs for the years ended December 31, 2014 and 2013 were $1,222,209 and $1,170,039, respectively. This 4% increase in research and development costs is a result of the direct development costs incurred in order to continue the expansion of the Company’s range of innovative products.

Bad Debt Expense (Recovery) - Bad debt expensed (recovered) for the years ended December 31, 2014 and 2013 were $75,285 and ($5,218), respectively. This increase is primarily as a result of the write off of unrecoverable debts owing to Two Eleven.

General and Administrative Expenses – General and administration costs consist of insurance, travel, merchant fees, communication costs, office and computer supplies with insurance and travel comprising a substantial part of these expenses. General and administrative expenses for the years ended December 31, 2014 and 2013 were $2,081,339 and $2,097,155, respectively. The 1% decrease in general and administrative expenses is primarily the result of decreased product liability insurance premiums partially offset by increased expenditure on travel during the 2014 period.

[42]

---

Depreciation Expense – Depreciation expense for the years ended December 31, 2014 and 2013 was $304,690 and $334,049, respectively. The 9% decrease in depreciation expense is primarily as a result of certain assets being fully depreciated during the period as they had reached the end of their economic useful lives.

Total Operating Expenses – Total operating expenses increased by $118,393 to $9,372,086 for the year ended December 31, 2014, or 1%, compared to $9,253,693 in the 2013 period. This increase is primarily due to increased salaries and wages, and research and development costs, that were partially set off by a decrease in professional fees and advertising and marketing costs as discussed above.

Net Income (Loss) – The net income after income taxes for the year ended December 31, 2014 was $418,351, as compared to a net loss after income taxes of ($375,176) for the 2013 period. This increase in net income is primarily due to increased revenues and gross profit as discussed above.

Liquidity and Capital Resources

At December 31, 2014, we had cash and cash equivalents of $0.7 million and short-term investments of $0.06 million, as compared to cash and cash equivalents of $0.80 million and short-term investments of $0.06 million at December 31, 2013. The following table sets forth a summary of our cash flows for the periods indicated:

Cash decreased by $110,305, or 13%, for the year ended December 31, 2014. The primary sources of cash during fiscal year 2014 were a net income of $418,351 and an increase in accounts payable of $904,076. The primary uses of cash during fiscal year 2014 were increases in accounts receivables of $1,144,398 and increased capital expenditures of $463,105 relating primarily to moulds to be used for the Company’s increased range of products. As of December 31, 2014, we did not have any credit facilities or significant amounts owing to third party lenders.

The Company is currently meeting its working capital needs through cash on hand as well as internally generated cash from operations. Management believes that its current cash and cash equivalent balances, along with the net cash generated by operations are sufficient to meet its anticipated operating cash requirements for at least the next twelve months. There are currently no plans for any major capital expenditures in the next twelve months. Our long-term financing requirements depend on our growth strategy, which relates primarily to our desire to increase revenue both domestically as well as internationally.

Obligations under Material Contracts

Pursuant to our Licensing Agreement with Xceed Holdings, a company owned and controlled by Dr. Christopher Leatt, our founder, chairman and head of research and development, we pay Xceed Holdings, 4% of all Neck Brace sales revenue billed and received by the Company on a quarterly basis, based on sales of the previous quarter. In addition, pursuant to a separate license agreement between the Company and Mr. J. P. De Villiers, our former director, the Company is obligated to pay a royalty fee of 1% of all our billed and received Neck Brace sales revenue, in quarterly installments, based on sales of the previous quarter, to a trust that is beneficially owned and controlled by Mr. De Villiers.

Pursuant to a Premium Finance Agreement, dated October 11, 2013, between the Company and AFCO Acceptance Corporation “AFCO,” the company was obligated to pay AFCO an aggregate sum of $1,001,151 in eleven payments of $91,014, at a 2.647% annual interest rate, commencing on November 1, 2013 and ending on September 1, 2014. As of September 30, 2014, the Company had repaid AFCO the entire balance due under the Premium Finance Agreement, and had entered into a new premium financing agreement, dated October 7, 2014, with them. Pursuant to the new agreement, the Company is obligated to pay AFCO an aggregate sum of $ 741,165 in eleven payments of $68,273, at an annual interest rate of 2.647%, commencing on November 1, 2014 and ending on September 1, 2015. Any late payment during the term of the agreement will be assessed a late penalty of 5% of the payment amount due, and in the event of default AFCO has the right to accelerate the payment due under the agreement.

[43]

---

Pursuant to a Premium Finance Agreement, dated June 9, 2014, between the Company and AFCO, the company is obligated to pay AFCO an aggregate sum of $59,244 in eleven payments of $4,997 at a 2.647% annual interest rate, commencing on June 1, 2014 and ending on April 1, 2015. Any late payment during the term of the agreement will be assessed a late penalty of 5% of the payment amount due, and in the event of default AFCO has the right to accelerate the payment due under the agreement. As of December 31, 2014, the Company had not defaulted on its payment obligations under this agreement.

Critical Accounting Policies

Our discussion and analysis of financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported revenues and expenses during the reporting period.

We have identified the following as the items that require the most significant judgment and often involve complex estimation: revenue recognition, estimating allowances for doubtful accounts receivable, inventory valuation, impairment of long-lived assets and accounting for income taxes.

Revenue and Cost Recognition - All manufacturing of Leatt-Brace products is performed by third party subcontractors in China. The Company's products are sold worldwide to a global network of distributors and dealers, and directly to consumers when there are no dealers or distributors in their geographic area (collectively the "customers"). Revenues from product sales are recognized when earned, net of applicable provisions for discounts and returns and allowances in the event of product defect. Revenue is considered to be realized or realizable and earned when all of the following criteria are met: title and risk of loss have passed to the customer, persuasive evidence of an arrangement exists, delivery has occurred, the price is fixed and determinable and collectability is reasonably assured. Our distributor payment terms range from pre-payment in full to 60 days after shipment and subsequent sales of our products by distributors have no effect on the amount and timing of payments due to us. Furthermore, products purchased by distributors may not be returned to us in the event that any such distributor relationship is terminated.

Since the Company (through its wholly owned subsidiary) serves as the distributor of Leatt products in the United States, the Company records its revenue and related cost of revenue for its product sales in the United States upon shipment of the merchandise to the dealer or to the ultimate consumer when there is no dealer in the geographic area and the sales order was received directly from, and paid by, the ultimate consumer. Since the Company (through its South African branch) serves as the distributor of Leatt products in South Africa, the Company records its revenue and related cost of revenue for its product sales in South Africa upon shipment of the merchandise from the branch to the dealer. International sales (other than in South Africa) are generally drop-shipped directly from the third party manufacturer to the international distributors.

Revenue and related cost of revenue is recognized at the time of shipment from the manufacturer's port when the shipping terms are Free On Board ("FOB") shipping point. Cost and Freight ("CFR") or Cost and Insurance to named place ("CIP") as legal title and risk of loss to the product pass to the distributor. Sales to all customers (distributors, dealers and consumers) are generally final; however, in limited instances, product may be returned due to product quality issues. Historically, returns due to product quality issues have not been material and there have been no distributor terminations that resulted in product returns. Cost of revenues also includes royalty fees associated with sales of Leatt-Brace products.

Product royalty income is recorded as the underlying product sales occur, in accordance with the related licensing arrangements.

Allowance for Doubtful Accounts Receivable - Accounts receivable consist of amounts due to the Company from normal business activities. Credit is granted to substantially all distributors on an unsecured basis. We continuously monitor collections and payments from customers and maintain an allowance for doubtful accounts receivable based upon historical experience and any specific customer collection issues that have been identified. In determining the amount of the allowance, we are required to make certain estimates and assumptions. Accounts receivable balances that are still outstanding after we have used reasonable collection efforts are written off as uncollectible. While such credit losses have historically been minimal, within our expectations and the provisions established, we cannot guarantee that we will continue to experience the same credit loss rates that we have in the past. A significant change in the liquidity or financial position of any of our significant customers could have a material adverse effect on the collectability of our accounts receivable and our future operating results.

[44]

---

Inventory Valuation – Inventory is stated at the lower of cost or market. Cost is determined using the first-in first-out (FIFO) method. Inventory consists primarily of finished goods. Shipping and handling costs are included in the cost of inventory. In assessing the inventory value, we make estimates and judgments regarding reserves required for product obsolescence, aging of inventory and other issues potentially affecting the saleable condition of products. In performing such evaluations, we utilize historical experience as well as current market information. The reserve for obsolescence for the years ended December 31, 2014 and 2013 was $161,593 and $131,655, respectively.

Impairment of Long-Lived Assets – Our long-lived assets include property and equipment. We evaluate our long-lived assets for recoverability whenever events or changes in circumstances indicate that an asset may be impaired. In evaluating an asset for recoverability, we estimate the future cash flow expected to result from the use of the asset and eventual disposition. If the expected future undiscounted cash flow is less than the carrying amount of the asset, an impairment loss, equal to the excess of the carrying amount over the fair value of the asset, is recognized. We have determined there was no impairment charge during the years ended December 31, 2014 and 2013.

Income Taxes - As part of the process of preparing our consolidated financial statements, we are required to estimate our income tax provision (benefit) in each of the jurisdictions in which we operate. This process involves estimating our current income tax provision (benefit) together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheets. We regularly evaluate our ability to recover the reported amount of our deferred income taxes considering several factors, including our estimate of the likelihood of the Company generating sufficient taxable income in future years during the period over which the temporary differences reverse.

Recent Accounting Pronouncements

See Note 2, "Summary of Significant Accounting Policies" in the Notes to Consolidated Financial Statements for a full description of recent accounting pronouncements, including the respective dates of adoption, or expected adoption and effects of our consolidated financial position, results of operations and cash flows.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on its financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to its stockholders.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Some of our operations are carried out in the Republic of South Africa, or RSA, and we are subject to specific considerations and significant risks not typically associated with companies in North America and Western Europe. Accordingly, our business, financial condition and results of operations may be influenced by the political, economic and legal environments in the RSA, and by the general state of the RSA economy. Our results may be adversely affected by changes in governmental policies with respect to laws and regulations, anti-inflationary measures, currency conversion and remittance abroad, and rates and methods of taxation, among other things.

Foreign Exchange Risk

While our reporting currency is the U.S. Dollar, a portion of our consolidated revenues are denominated in South African Rand, or ZAR. Certain of our assets are also denominated in ZAR. As a result, we are exposed to foreign exchange risk as our revenues and results of operations may be affected by fluctuations in the exchange rate between the U.S. Dollar and the ZAR. If the ZAR depreciates against the U.S. Dollar, the value of our ZAR revenues, earnings and assets as expressed in our U.S. Dollar financial statements will decline. Assets and liabilities are translated at exchange rates at the balance sheet date and revenue and expenses are translated at the spot exchange rate on the transaction date. Any resulting translation adjustments are not included in determining net income but are included in determining other comprehensive income, a component of stockholder’s equity. We have not entered into any hedging transactions in an effort to reduce our exposure to foreign exchange risk. The value of the ZAR against the U.S. dollar and other currencies is affected by, among other things, changes in the RSA’s political and economic conditions.

[45]

---

Inflation

Inflationary factors such as increases in the cost of our sales and overhead costs may adversely affect our operating results. Although we do not believe that inflation has had a material impact on our financial position or results of operations to date, a high rate of inflation in the future may have an adverse effect on our ability to maintain current levels of gross margin and selling, general and administrative expenses as a percentage of net sales if the selling prices of our products do not increase with these increased costs.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

The full text of our audited consolidated financial statements as of December 31, 2014 and 2013 begins on page F-1 of this report.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

ITEM 9A. CONTROLS AND PROCEDURES.

Disclosure Controls and Procedures

We maintain disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) that are designed to ensure that information that would be required to be disclosed in Exchange Act reports is recorded, processed, summarized and reported within the time period specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including to our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

As required by Rule 13a-15 under the Exchange Act, our management, including our Chief Executive Officer and Chief Financial Officer, Mr. Sean Macdonald, evaluated the effectiveness of the design and operation of our disclosure controls and procedures as of December 31, 2014. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer determined that, as of December 31, 2014, and as of the date that the evaluation was completed, our disclosure controls and procedures were effective.

Internal Controls over Financial Reporting

Management’s Annual Report on Internal Control over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. Internal control over financial reporting refers to the process designed by, or under the supervision of, our Chief Executive Officer and Chief Financial Officer, and effected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with U.S. GAAP, and includes those policies and procedures that:

	(1)	pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets;
	(2)	provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. GAAP, and that our receipts and expenditures are being made only in accordance with the authorization of our management and directors; and
	(3)	provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2014. In making this assessment, management used the framework set forth in the report entitled Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on that evaluation, our management concluded that our internal control over financial reporting, as of December 31, 2014 was effective.

Because the Company is a smaller reporting company, this annual report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our independent registered public accounting firm.

[46]

---

Changes in Internal Controls over Financial Reporting

There were no changes in its internal controls over financial reporting in 2014 that would materially affect, or are reasonably likely to materially affect our internal control over financial reporting.

ITEM 9B. OTHER INFORMATION.

We have no information to disclose that was required to be in a report on Form 8-K during the period covered by this report, but was not reported. There have been no material changes to the procedures by which security holders may recommend nominees to our board of directors.

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

Directors, Executive Officers, Promoters and Control Persons

The following sets forth the name and position of each of our current executive officers, directors and significant employees and their ages and titles as of March 20, 2015.

Name	Age	Title
Dr. Christopher James Leatt	46	Founder, Chairman and Head of Research & Development
Sean Macdonald	37	CEO, CFO, President and Director
Jeffrey Joseph Guzy	63	Director

DR. CHRISTOPHER LEATT: Dr. Leatt, aged 46, has served as a director since 2005. Dr. Chris Leatt (MB ChB) studied medicine at the University of Cape Town and completed his internship in the United Kingdom before returning to South Africa to pursue his career in medicine. He held positions in General Surgery and General Medicine/Geriatrics/Gastroenterology before becoming a General Medical Practitioner and Chairman of ERIPO (Eerste River Independent Practitioners Association), an organization formed to look after both the Medical and Business interests of forty Independent Practitioners. Dr. Leatt then worked in casualty/trauma at various hospitals before becoming a surgical medical officer. A brief stint as an Orthopedic Registrar at Groote Schuur Hospital preceded his post as Neurosurgery Registrar at the Department of Neurosurgery, Tygerberg Academic Hospital. Dr. Leatt's duties as a surgical registrar in this discipline included ward work, High-Care duties, evaluation of referrals, outpatient consultations, emergency and elective surgery, logbook of all surgical procedures completed. He resigned from his post in Neurosurgery in order to develop and study the benefits and viability of a neck protection system (the Leatt-Brace®) for helmet clad sport and recreational users in an attempt to reduce devastating neck injuries. Dr. Leatt is a fixed wing and helicopter pilot and is an active participant in competitive cross-country motorcycle endurance races, as well as Super Sport and Battle of the Twins (BOTTS) track racing events. He won the Western Province BOTTS championship in 2011. When not participating in such events, Dr. Leatt is often involved in providing medical support there.

SEAN MACDONALD: Mr. Macdonald, CA (SA), aged 37 has served as the Company’s Chief Executive Officer and President since November 9, 2010, as its Chief Financial Officer since August 1, 2009, and as a Director since May 6, 2010. Prior to joining the Company, Mr. Macdonald served from August 2004 to December 2009, as the Chief Financial Officer of Cyclelab, the largest bicycle retailer in South Africa, where he was responsible for operational, financial and strategic leadership of the business including the implementation of a franchise model in order to grow the business. Mr. Macdonald holds a Bachelor of Commerce Degree in Finance and Information Systems from the University of Cape Town, as well as a Post-Graduate Diploma in Accounting, which included 3 years of articling at KPMG Cape Town. Mr. Macdonald is also a South Africa registered Chartered Accountant.

JEFFREY GUZY: Mr. Guzy, aged 63, has served as a director since April 4^th, 2007 and serves as a business development consultant and entrepreneur in Arlington, Virginia. Mr. Guzy is currently working with CENTRAL Oil and Gas Corporation and Aero-X Golf Inc (dba Polara Golf). Prior to that, Mr. Guzy served, from October 2007 to August 2010 as our President. Mr. Guzy has a MBA in Strategic Planning and Management from The Wharton School of the University of Pennsylvania; a M.S. in Systems Engineering from the University of Pennsylvania; a B.S. in Electrical Engineering from Penn State University; and a Certificate in Theology from Georgetown University. Mr. Guzy has served as an executive manager or consultant for business development, sales, customer service and management in the telecommunications industry, specifically, with IBM Corp., Sprint International, Bell Atlantic Video Services, Loral CyberStar and FaciliCom International. Mr. Guzy has also started his own telecommunications company providing Internet services in Western Africa. He serves as an independent director of Capstone Industries (CAPC) and UBL Interactive (UBLI), both public corporations.

[47]

---

There are no agreements or understandings for any of our executive officers, directors or significant employees to resign at the request of another person and no officer or director is acting on behalf of nor will any of them act at the direction of any other person.

Qualifications, Attributes, Skills and Experience Represented on the Board

The Board has identified particular qualifications, attributes, skills and experience that are important to be represented on the board as a whole, in light of our current needs and business priorities. The Board believes that each director is a recognized person of high integrity with a proven record of success in his or her field. Each director demonstrates innovative thinking, familiarity with and respect for corporate governance requirements and practices, an appreciation of multiple cultures and a commitment to the business and operations of the Company. In addition to the foregoing qualifications, the Board has assessed the intangible qualities including the director’s ability to ask difficult questions and, simultaneously, to work collegially. The Board also considers diversity of age, cultural background and professional experiences in evaluating candidates for Board membership. Diversity is important because a variety of points of view contribute to a more effective decision-making process.

Set forth below is a tabular disclosure summarizing some of the specific qualifications, attributes, skills and experiences of our directors.

Family Relationships

There are no family relationships among our directors or officers.

Involvement in Certain Legal Proceedings

To the best of our knowledge, none of our directors or executive officers has, during the past ten years:

• been convicted in a criminal proceeding or been subject to a pending criminal proceeding (excluding traffic violations and other minor offences);

[48]

---

• had any bankruptcy petition filed by or against the business or property of the person, or of any partnership, corporation or business association of which he was a general partner or executive officer, either at the time of the bankruptcy filing or within two years prior to that time;

• been subject to any order, judgment, or decree, not subsequently reversed, suspended or vacated, of any court of competent jurisdiction or federal or state authority, permanently or temporarily enjoining, barring, suspending or otherwise limiting, his involvement in any type of business, securities, futures, commodities, investment, banking, savings and loan, or insurance activities, or to be associated with persons engaged in any such activity;

• been found by a court of competent jurisdiction in a civil action or by the SEC or the Commodity Futures Trading Commission to have violated a federal or state securities or commodities law, and the judgment has not been reversed, suspended, or vacated;

• been the subject of, or a party to, any federal or state judicial or administrative order, judgment, decree, or finding, not subsequently reversed, suspended or vacated (not including any settlement of a civil proceeding among private litigants), relating to an alleged violation of any federal or state securities or commodities law or regulation, any law or regulation respecting financial institutions or insurance companies including, but not limited to, a temporary or permanent injunction, order of disgorgement or restitution, civil money penalty or temporary or permanent cease-and-desist order, or removal or prohibition order, or any law or regulation prohibiting mail or wire fraud or fraud in connection with any business entity; or

• been the subject of, or a party to, any sanction or order, not subsequently reversed, suspended or vacated, of any self- regulatory organization (as defined in Section 3(a)(26) of the Exchange Act (15 U.S.C. 78c(a)(26))), any registered entity (as defined in Section 1(a)(29) of the Commodity Exchange Act (7 U.S.C. 1(a)(29))), or any equivalent exchange, association, entity or organization that has disciplinary authority over its members or persons associated with a member.

Except as set forth in our discussion below in “Certain Relationships and Related Transactions, and Director Independence – Transactions with Related Persons,” none of our directors, director nominees or executive officers has been involved in any transactions with us or any of our directors, executive officers, affiliates or associates which are required to be disclosed pursuant to the rules and regulations of the SEC.

Significant Employees

ERIK OLSSON: Mr. Olsson, aged 47, has served as our International General Manager and Head of International Distribution since January 2012. Prior to that, Mr. Olsson served from January 2010 to December 2011, as European General Manager and later as General Manager of Asia, Europe, the Middle-East and the Central Pacific (Oceania). Mr. Olsson has over 15 years’ as a sales and product manager for various companies in the power sports industry. Prior to joining us he served from January 2003 to December 2009 as Area Manager for Jofrab Ab, a Swedish distributor of motorcycles and recreational vehicles.

TODD REPSHER: Mr. Repsher, aged 44, has served as our US National Sales Manager since March 2014. Mr. Repsher is an award- winning sales executive with over fifteen years experience in the marketing and sales of sports orientated companies in North America. Prior to joining us he was the National Sales Manager for Switzerland-based Scott Sports, Inc. from 2011 to 2013, where he managed the sale and distribution of all North American motorsports (off-road, on-road, snowmobile) apparel and accessories for Scott Sports. Prior to that, Mr. Repsher served, from 2002 to 2011, as the Outside Sales Territory Manager for California-based Fox Racing, Inc.

Stockholder Communication with the Board of Directors

Stockholders may communicate with the Board by sending a letter to our Board of Directors, c/o Corporate Secretary, 50 Kiepersol Drive, Atlas Gardens, Contermanskloof Road, Durbanville, Western Cape, South Africa, 7441, for submission to the board or committee or to any specific director to whom the correspondence is directed. Stockholders communicating through this means should include with the correspondence evidence, such as documentation from a brokerage firm, that the sender is a current record or beneficial stockholder of the Company. All communications received as set forth above will be opened by the Corporate Secretary or his designee for the sole purpose of determining whether the contents contain a message to one or more of our directors.

[49]

---

Any contents that are not advertising materials, promotions of a product or service, patently offensive materials or matters deemed, using reasonable judgment, inappropriate for the Board will be forwarded promptly to the chairman of the Board, the appropriate committee or the specific director, as applicable.

Code of Ethics

We have adopted a written code of ethics that applies to all of our officers, directors and employees, including our principal executive officer and principal financial officer, or persons performing similar functions, a copy of which is attached as an exhibit to this report.

ITEM 11. EXECUTIVE COMPENSATION

Summary Compensation Table Update

The following table sets forth information concerning all cash and non-cash compensation awarded to, earned by or paid to the following persons for services rendered in all capacities during the indicated periods. No other executive officers received total annual salary and bonus compensation in excess of $100,000.

The following table sets forth information concerning all cash and non-cash compensation awarded to, earned by or paid to the following persons for services rendered in all capacities during the indicated periods. No other executive officers received total annual salary and bonus compensation in excess of $100,000.

(1)	The option awards reflect a 1-for-25 reverse split effected by the Company on September 20, 2012.
(2)	Reflects compensation to Dr. Leatt in his capacity as the head of our Research and Development department. Pursuant to an employment agreement with the Company, Dr. Leatt receives an annual base salary of $487,668, as well as other benefits.

Summary of Employment Agreements

We have entered into an employment agreement, effective as of January 1, 2014, with Sean Macdonald our President, CEO and CFO, pursuant to which, as amended, we were obligated to pay him an annual base salary of ZAR 2,199,987 (approximately $189,626). Mr. Macdonald receives coverage under the Company’s employment benefit plans and is entitled to an annual performance based bonus at the sole discretion of the Company’s Board of Directors. Mr. Macdonald is also subject to the customary confidentiality covenants and South African Labor Laws entitle Mr. Macdonald to one week’s severance pay for each year of service to the Company. The agreement may be terminated by either party with six months’ written notice; provided that Mr. Macdonald will be obligated to assist in the appointment and orientation of his successor during such six-month period. Mr. Macdonald may also be terminated by the Company with no notice for gross misconduct, incapacity or for breach of the employment agreement.

We have also entered into an employment agreement, effective as of November 9, 2010, with Dr. Christopher Leatt, in his capacity as our Chairman and Head of Research and Development, pursuant to which, we were obligated to pay him an annual base salary of $487,668. Dr. Leatt will also receive coverage under the Company’s employment benefit plans as well as the mandatory one week’s severance pay for each year of service to the Company. He is also subject to the customary confidentiality covenants. The agreement may be terminated by either party with twelve months’ written notice; provided that Dr. Leatt will be obligated to assist in the appointment and orientation of his successor for a period of six months following such termination. This six-month obligation is also applicable in the event that there is a change of control over the Company. Dr. Leatt may also be terminated by the Company with no notice for gross misconduct, incapacity or for material breach of the employment agreement.

[50]

---

Grants of Plan-Based Awards

The following table sets forth information regarding equity grants to named executive officers during the fiscal year ended December 31, 2014, including prior year grants that vested during the period.

(1)	The Company effected a one-for-twenty-five reverse stock split on September 20, 2012, which decreased the number of option shares and increased the exercise price to $1.00 per share.

Outstanding Equity Awards at Fiscal Year End

The following table sets forth the equity awards outstanding at December 31, 2014 for each of our named executive officers.

⁽¹⁾ The Company effected a one-for-twenty-five reverse stock split on September 20, 2012, which decreased the number of option shares and increased the exercise price to $1.00 per share.

On February 1, 2012, the Board of Directors of the Company approved the grant to Dr. Christopher Leatt, the Company’s Chairman, of a 5-year option to purchase 1,300,000 shares of the Company’s common stock at $0.04 per share under the Company’s 2011 Plan. The option to purchase 520,000 of the shares vested on February 1, 2012, the grant date, and the option to purchase the remaining shares vested in equal portions on December 31, 2012, 2013 and 2014. After giving effect to the reverse split effected on September 20, 2012, Dr. Leatt has vested options to purchase 52,000 shares of the Company’s common stock at $1.00 per share.

On February 1, 2012, the Board of Directors of the Company approved the grant to Sean Macdonald, the Company’s Chief Executive Officer and Chief Financial Officer, of a 5-year option to purchase 1,950,000 shares of the Company’s common stock at $0.04 per share under the Company’s 2011 Plan. The option to purchase 780,000 of the shares vested on February 1, 2012, the grant date, and the option to purchase the remaining shares vested in equal portions on December 31, 2012, 2013 and 2014. After giving effect to the reverse split effected on September 20, 2012, Mr. Macdonald has vested options to purchase 78,000 shares of the Company’s common stock at $1.00 per share.

[51]

---

Option Exercises and Stock Vested

On December 31, 2014, options to purchase an additional 33,800 shares of our common stock at $1.00 per share (after giving effect to the reverse split effected on September 20, 2012) vested. Except for the foregoing, no named executive officers exercised stock options, stock appreciation rights or similar instruments or had vesting stock during the fiscal year ended December 31, 2014.

Pension Benefits

No named executive officers received or held pension benefits and the Company does not maintain a pension benefit plan during the fiscal year ended December 31, 2014.

Nonqualified Deferred Compensation

No nonqualified deferred compensation was offered or issued to any named executive officer during the fiscal year ended December 31, 2014.

Potential Payments upon Termination or Change in Control

Our named executive officers are not entitled to severance payments or other benefit upon the termination of their employment agreements or following a change in control.

Compensation of Directors

The following table sets forth the total director compensation earned by our directors during our fiscal year ended December 31, 2014:

Narrative to Director Compensation Table

During the 2014 fiscal year, we paid our directors approximately ZAR 5,000 (approximately, $463) per month compensation for their services as our directors. In the future, we may adopt a policy of paying independent directors a fee for their attendance at board and committee meetings. We also reimburse our directors for reasonable travel expenses related to their duties as our directors.

On February 14, 2014, the Board of Directors of the Company approved the grant to Jeff Guzy, one of the Company’s Directors, of a 5-year option to purchase an aggregate of 15,000 shares of the Company’s common stock at $1.00 per share under the Company’s 2011 Plan. The option to purchase an aggregate of 6,000 of the shares vested on February 14, 2014, the grant date, and the option to purchase another 3,000, vested on February 14, 2015. The remaining 6,000 shares will vest in two equal portions on each of February 14, 2016 and 2017.

Limitation of Liability and Indemnification

Section 78.138 of the NRS provides that a director or officer will not be individually liable unless it is proven that (i) the director's or officer's acts or omissions constituted a breach of his or her fiduciary duties, and (ii) such breach involved intentional misconduct, fraud or a knowing violation of the law.

Section 78.7502 of NRS permits a company to indemnify its directors and officers against expenses, judgments, fines and amounts paid in settlement actually and reasonably incurred in connection with a threatened, pending or completed action, suit or proceeding if the officer or director (i) is not liable pursuant to NRS 78.138 or (ii) acted in good faith and in a manner the officer or director reasonably believed to be in or not opposed to the best interests of the corporation and, if a criminal action or proceeding, had no reasonable cause to believe the conduct of the officer or director was unlawful.

[52]

---

Section 78.751 of NRS permits a Nevada company to indemnify its officers and directors against expenses incurred by them in defending a civil or criminal action, suit or proceeding as they are incurred and in advance of final disposition thereof, upon receipt of an undertaking by or on behalf of the officer or director to repay the amount if it is ultimately determined by a court of competent jurisdiction that such officer or director is not entitled to be indemnified by the company. Section 78.751 of NRS further permits the company to grant its directors and officers additional rights of indemnification under its articles of incorporation or bylaws or otherwise.

Section 78.752 of NRS provides that a Nevada company may purchase and maintain insurance or make other financial arrangements on behalf of any person who is or was a director, officer, employee or agent of the company, or is or was serving at the request of the company as a director, officer, employee or agent of another company, partnership, joint venture, trust or other enterprise, for any liability asserted against him and liability and expenses incurred by him in his capacity as a director, officer, employee or agent, or arising out of his status as such, whether or not the company has the authority to indemnify him against such liability and expenses.

Our Articles of Incorporation provide that no director or officer of the Company will be personally liable to the Company or any of its stockholders for damages for breach of fiduciary duty as a director or officer; provided, however, that the foregoing provision shall not eliminate or limit the liability of a director or officer (i) for acts or omissions which involve intentional misconduct, fraud or knowing violation of law, or (ii) the payment of dividends in violation of Section 78.300 of NRS. In addition, our Bylaws implement the indemnification and insurance provisions permitted by Chapter 78 of the NRS by providing that:

• The Company shall indemnify its directors to the fullest extent permitted by the NRS and may, if and to the extent authorized by the board of directors, so indemnify its officers and any other person whom it has the power to indemnify against liability, reasonable expense or other matter whatsoever.

• The Company may at the discretion of the board of directors purchase and maintain insurance on behalf of any person who holds or who has held any position identified in the paragraph above against any and all liability incurred by such person in any such position or arising out of his status as such.

Insofar as indemnification by us for liabilities arising under the Securities Act may be permitted to our directors, officers or persons controlling the company pursuant to provisions of our articles of incorporation and bylaws, or otherwise, we have been advised that in the opinion of the SEC, such indemnification is against public policy as expressed in the Securities Act and is therefore unenforceable. In the event that a claim for indemnification by such director, officer or controlling person of us in the successful defense of any action, suit or proceeding is asserted by such director, officer or controlling person in connection with the securities being offered, we will, unless in the opinion of our counsel the matter has been settled by controlling precedent, submit to a court of appropriate jurisdiction the question whether such indemnification by us is against public policy as expressed in the Securities Act and will be governed by the final adjudication of such issue.

Other than as disclosed herein, there is no pending litigation or proceeding involving any of our directors or executive officers to which indemnification is required or permitted, and we are not aware of any threatened litigation or proceeding that may result in a claim for indemnification.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

Security Ownership of Certain Beneficial Owners and Management

The following table sets forth, as of March 20, 2015, the stock ownership of (i) each of our executive officers and directors, (i) of all our executive officers and directors as a group, and (iii) of each person known by us to be a beneficial owner of 5% or more of our common stock. Except as otherwise noted, each person listed below is the sole beneficial owner of the shares and has sole investment and voting power of such shares. No person listed below has any option, warrant or other right to acquire additional securities of the Company, except as may be otherwise noted. Unless otherwise specified, the address of each of the persons set forth below is in care of Leatt Corporation, 50 Kiepersol Drive, Atlas Gardens, Contermanskloof Road, Durbanville, Western Cape, South Africa, 7441.

[53]

---

(1)	The Preferred Stock votes with the Common Stock at a vote of 100-for-one, subject to adjustments resulting from any future stock splits. The Preferred Stock has priority over the Common Stock in any liquidation preferences but no dividend rights (except as may be declared by the Board). The Common Stock has dividend rights in respect of any dividend distributions when and if declared and paid by the Company. The Common Stock has a claim to any liquidation distribution, subject to the priority claim of the Preferred Stock. No dividends have been paid to date on any securities. There are no other classes of equity securities authorized and issued.
(2)	Beneficial Ownership is determined in accordance with the rules of the U.S. Securities and Exchange Commission or “SEC” and generally includes voting or investment power with respect to securities. Each of the beneficial owners listed above has direct ownership of and sole voting power and investment power with respect to the shares of our common stock.
(3)	As of the date of this report and after giving effect to the Company’s 1-for-25 reverse stock split effected on September 20, 2012 (the “Reverse Split”), the Company has 28,000,000 shares of common stock authorized with 5,200,623 shares issued and outstanding, and 1,120,000 shares of Preferred Stock authorized with 120,000 shares issued and outstanding. For each Beneficial Owner above, any options exercisable within 60 days have been included in the denominator.
(4)	Includes a vested 5-year option to purchase 52,000 shares of the Company’s common stock at $1.00 per share, issued to Dr. Leatt under the Company’s 2011 Plan after giving effect to the Reverse Split.
(5)	Includes a vested 5-year option to purchase 9,000 shares of the Company’s common stock at $1.00 per share, issued to Mr. Guzy under the Company’s 2011 Plan. An additional 6,000 shares are slated to vest in two equal parts on February 14, 2016 and 2017.
(6)	Represents a vested 5-year option to purchase 78,000 shares of the Company’s common stock at $1.00 per share, issued to Mr. Macdonald under the Company’s 2011 Plan after giving effect to the Reverse Split.

Changes in Control

We do not currently have any arrangements which if consummated may result in a change of control of our Company.

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

Transactions with Related Persons

The following includes a summary of transactions since the beginning of the last fiscal year, or any currently proposed transaction, in which we were or are to be a participant and the amount involved exceeded or exceeds $120,000, and in which any related person had or will have a direct or indirect material interest (other than compensation described under “Executive Compensation”). We believe the terms obtained or consideration that we paid or received, as applicable, in connection with the transactions described below were comparable to terms available or the amounts that would be paid or received, as applicable, in arm’s-length transactions.

[54]

---

On March 1, 2006, we entered into a Licensing Agreement with Xceed Holdings (formerly, Leatt Brace Holdings), a South African company that is controlled by Dr. Leatt, the Company’s Chairman, and by Mr. De Villiers until his resignation on August 29, 2006. Under the terms of the Licensing Agreement, we are obligated to pay Xceed Holdings 4% of all sales revenue billed and received by us, on a quarterly basis based on sales of the previous quarter. In addition, pursuant to a separate license agreement between us and Mr. De Villiers, we are obligated to pay a royalty fee of 1% of all our billed and received sales revenue, in quarterly installments, based on sales of the previous quarter, to a trust that is beneficially owned and controlled by Mr. De Villiers. Royalties totaled $480,689 and $465,316 for the years ended December 31, 2014 and 2013, respectively.

Except as set forth in our discussion above, none of our directors, director nominees or executive officers has been involved in any transactions with us or any of our directors, executive officers, affiliates or associates which are required to be disclosed pursuant to the rules and regulations of the SEC.

Policies and Procedures for Review, Approval or Ratification of Transactions with Related Persons

As we increase the size of our board of directors to include additional independent directors, we expect to prepare and adopt a written related-person transactions policy that sets forth our policies and procedures regarding the identification, review, consideration and approval or ratification of “related-persons transactions.” For purposes of our policy only, a “related-person transaction” will be a transaction, arrangement or relationship (or any series of similar transactions, arrangements or relationships) in which we and any “related person” are participants involving an amount that exceeds $120,000. Transactions involving compensation for services provided to us as an employee, director, consultant or similar capacity by a related person will not be covered by this policy. A related person will be any executive officer, director or a holder of more than five percent of our common stock, including any of their immediate family members and any entity owned or controlled by such persons.

We anticipate that, where a transaction has been identified as a related-person transaction, the policy will require management to present information regarding the proposed related-person transaction to our audit committee (or, where approval by our audit committee would be inappropriate, to another independent body of our board of directors) for consideration and approval or ratification. Management’s presentation will be expected to include a description of, among other things, the material facts, the direct and indirect interests of the related persons, the benefits of the transaction to us and whether any alternative transactions are available.

To identify related-person transactions in advance, we are expected to rely on information supplied by our executive officers, directors and certain significant stockholders. In considering related-person transactions, our board of directors will take into account the relevant available facts and circumstances including, but not limited to:

• the risks, costs and benefits to us;
• the impact on a director’s independence in the event the related person is a director, immediate family member of a director or an entity with which a director is affiliated;
• the terms of the transaction;
• the availability of other sources for comparable services or products; and
• the terms available to or from, as the case may be, unrelated third parties or to or from our employees generally.

We also expect that the policy will require any interested director to excuse himself from deliberations and approval of the transaction in which the interested director is involved.

Promoters and Certain Control Persons

We did not have any promoters at any time during the past five fiscal years.

Director Independence

Our Board of Directors has determined that our director, Mr. Jeffery Guzy, is an independent director, as the term “independent” is defined by the rules of the Nasdaq Stock Market.

[55]

---

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES.

Independent Auditors’ Fees

The following is a summary of the fees billed to the Company for professional services rendered for the fiscal years ended December 31, 2014 and 2013:

		Year Ended December 31,
		2014			2013
Audit Fees	$	96,000		$	101,600
Audit-Related Fees		11,714			6,466
Tax Fees		8,411			8,693
All Other Fees		0			0
TOTAL	$	116,125		$	116,759

“Audit Fees” consisted of fees billed for professional services rendered by the principal accountant for the audit of our annual financial statements and review of the financial statements included in our Form 10-K and 10-Qs or services that are normally provided by the accountant in connection with statutory and regulatory filings or engagements.

“Audit-Related Fees” consisted of fees billed for assurance and related services by the principal accountant that were reasonably related to the performance of the audit or review of our financial statements and are not reported under the paragraph captioned “Audit Fees” above.

“Tax Fees” consisted of fees billed for professional services rendered by the principal accountant for tax returns preparation.

“All Other Fees” consisted of fees billed for products and services provided by the principal accountant, other than the services reported above under other captions of this Item 14.

Pre-Approval Policies and Procedures

Under the Sarbanes-Oxley Act of 2002, all audit and non-audit services performed by our auditors must be approved in advance by our board of directors to assure that such services do not impair the auditors’ independence from us. In accordance with its policies and procedures, our board of directors pre-approved the audit and non-audit services performed by Fitzgerald & Co, CPAs, P.C. for our financial statements as of and for the year ended December 31, 2014.

PART IV

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES.

Financial Statements and Schedules

The financial statements are set forth under Item 8 of this annual report on Form 10-K. Financial statement schedules have been omitted since they are either not required, not applicable, or the information is otherwise included.

Exhibit List

The list of exhibits included in the attached Exhibit Index is hereby incorporated herein by reference.

[56]

---

Exhibit Number	Exhibit Title
2.1	Settlement Agreement, dated as of September 25, 2008, between Leatt Corp., Christopher J. Leatt and J. P. De Villiers (incorporated by reference to Exhibit 2.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
2.2	Amendment No. 1 to Settlement Agreement, dated February 4, 2010, between Leatt Corp., Christopher J. Leatt and Jean- Pierre DeVilliers (incorporated by reference to Exhibit 2.2 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
3.1	Amended and Restated Articles of Incorporation, as filed with the Secretary of State of Nevada on October 28, 2008 (incorporated by reference to Exhibit 3.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
3.2	Amended and Restated Bylaws, adopted on October 28, 2008 (incorporated by reference to Exhibit 3.2 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.1	Certificate of Designation of Series A Voting Convertible Preferred Stock, as filed with the Secretary of State of Nevada on October 29, 2008 (incorporated by reference to Exhibit 4.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.2	Leatt Corp. 2011 Equity Incentive Plan (incorporated by reference to Exhibit 4.5 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.3	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Dr. Christopher Leatt (incorporated by reference to Exhibit 4.6 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.4	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Sean Macdonald (incorporated by reference to Exhibit 4.7 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.5	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Philip Davy (incorporated by reference to Exhibit 4.8 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.6	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Erik Olsson (incorporated by reference to Exhibit 4.9 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.7	Stock Option Agreement, dated February 14, 2014, between Leatt Corp. and Jeffrey Guzy (incorporated by reference to Exhibit 4.10 to the Company’s annual report on Form 10-K, filed on March 19, 2014)
10.1	Patent and Royalty License Agreement, dated March 1, 2006, between Leatt Corp., Xceed Holdings (Pty) Ltd. (formerly, Leatt Brace Holdings (Pty) Ltd.) and J. P. De Villiers Trust (incorporated by reference to Exhibit 10.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.2	Amendment to Patent and Royalty License Agreement, dated as of March 1, 2006, between Leatt Corp. and Xceed Holdings (Pty) Ltd. (formerly, Leatt Brace Holdings (Pty) Ltd.) (incorporated by reference to Exhibit 10.2 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.3	Patent Assignment Agreement, dated January 1, 2009, between Xceed Holdings (Pty) Ltd. and Three Eleven Distribution (Pty) Ltd. (incorporated by reference to Exhibit 10.3 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.4	Software License Agreement, dated July 2, 2010, between Leatt Corp., Esteq Design (Pty) Ltd. and Siemens Industry Software Ltd. (incorporated by reference to Exhibit 10.4 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.5	Copyright Licensing Agreement, dated January 31, 2013, between Silva Mattos & CIA, LTDA and Leatt Corp. (incorporated by reference to Exhibit 10.5 to the Company’s annual report on Form 10-K, filed on March 19, 2014)
10.6	End User Licensing Agreement, dated June 30, 2011, between Bluekey Software Solutions and Leatt Corp. (incorporated by reference to Exhibit 10.6 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.7	Lease Agreement, dated September 11, 2012, between Two Eleven Distribution LLC and Center Pointe Properties, LLC (incorporated by reference to Exhibit 10.7 to the Company’s annual report on Form 10-K, filed on March 28, 2013)
10.8*	Lease Agreement, dated December 12, 2014, between Leatt Corp. and AJ Brutus Investments cc.

[57]

---

10.9*	Storage Rental Agreement, dated December 1, 2014, between The Storage Spot and Leatt Corp.
10.10	Leatt Distributor Form Business Terms, dated February 10, 2008 (incorporated by reference to Exhibit 10.11 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.11*	Storage Rental Agreement 2, dated January 1, 2012, between The Storage Spot and Leatt Corp.
10.12*	Premium Finance Agreement, dated June 9, 2014, between AFCO Acceptance Corp. and Leatt Corp.
10.13*	Employment Agreement, dated January 1, 2014, between Leatt Corp. and Sean Macdonald (as amended).
10.14*	Premium Finance Agreement, dated January 1, 2015, between Fulcrum Group (Pty) Ltd. and Leatt Corp.
10.15
10.16*	Employment Agreement, dated May 15, 2014, between Christopher Leatt and Leatt Corp.
10.17*	Promissory Note, dated October 7, 2014, between AFCO Acceptance Corp. and Leatt Corp.
14.1	Code of Ethics (incorporated by reference to Exhibit 14.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
21	List of subsidiaries of the registrant (incorporated by reference to Exhibit 21 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
31.1*	Certifications of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2*	Certifications of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1*	Certifications of Chief Executive Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2*	Certifications of Chief Financial Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101**	Interactive data files pursuant to Rule 405 of Regulation S-T

__________________________

*	Filed herewith
**	Pursuant to Rule 405 of Regulation S-T, the following financial information from the Company’s Annual Report on Form 10-K for the period ended December 31, 2014, is formatted in XBRL interactive data files: (i) Consolidated Balance Sheets at December 31, 2014 and 2013; (ii) Consolidated Statements of Operations and Comprehensive Income (Loss) for the years ended December 31, 2014 and 2013; (iii) Consolidated Statements of Changes in Shareholders’ Equity as of and for the years ended December 31, 2014 and 2013; (iv) Consolidated Statements of Cash Flows for the years ended December 31, 2014 and 2013; and (vi) Notes to Consolidated Financial Statements. Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, or for purposes of Section 18 of the Securities Act of 1934, as amended, and otherwise are not subject to liability under those sections.

[58]

---

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

Dated: March 26, 2015

LEATT CORPORATION
By: /s/ Sean Macdonald
Sean Macdonald, Chief Executive
Officer and Chief Financial Officer
(Principal Executive Officer and
Principal Financial and Accounting Officer)

In accordance with the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

Signature		Title	Date
/s/ Sean Macdonald		Chief Executive Officer, Chief	March 26, 2015
Sean Macdonald		Financial Officer and Director
		(Principal Executive Officer)
/s/ Dr. Christopher J. Leatt		Chairman	March 26, 2015
Dr. Christopher J. Leatt
/s/ Jeffrey J. Guzy		Director	March 26, 2015
Jeffrey J. Guzy

---

LEATT CORPORATION
CONSOLIDATED FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2014 AND 2013

Table of Contents

	Page
Report of Independent Registered Public Accounting Firm	F-2
Consolidated Financial Statements
Consolidated Balance Sheets	F-3
Consolidated Statements of Operations and Comprehensive Income (Loss)	F-4
Consolidated Statements of Changes in Stockholders’ Equity	F-5
Consolidated Statements of Cash Flows	F-6
Notes to Consolidated Financial Statements	F-7 – F-15

F-1

---

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders
Leatt Corporation

We have audited the accompanying consolidated balance sheets of LEATT CORPORATION as of December 31, 2014 and 2013 and the related consolidated statements of operations and comprehensive income (loss), changes in stockholders’ equity and cash flows for each of the years in the two-year period ended December 31, 2014. LEATT CORPORATION’s management is responsible for these consolidated financial statements. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of LEATT CORPORATION as of December 31, 2014 and 2013, and the results of its operations and its cash flows for each of the years in the two-year period ended December 31, 2014, in conformity with accounting principles generally accepted in the United States of America.

Vienna, Virginia
March 26, 2015

8150 Leesburg Pike • Suite 500 • Vienna, VA 22182

Phone: 703.847.4600 • Fax: 703.356.4821 • Email: fc@fcocpas.com • Website: http://www.fcocpas.com

Members of: American Institute of Certified Public Accountants PCPS/CAQ • Virginia Society of Certified Public Accountants

CPA Associates International, Inc., a consortium of independent CPA firms with members in Principal U.S. and International Cities

F-2

---

LEATT CORPORATION
CONSOLIDATED BALANCE SHEETS
DECEMBER 31, 2014 AND 2013

ASSETS
		2014			2013
Current Assets
Cash and cash equivalents	$	724,707		$	835,012
Short-term investments		58,153			58,130
Accounts receivable		4,239,298			3,139,273
Inventory		3,403,854			3,259,274
Payments in advance		345,406			144,302
Income tax refunds receivable		25,299			299
Deferred tax asset		108,000			110,000
Prepaid expenses and other current assets		994,003			1,092,450
Total current assets		9,898,720			8,638,740
Property and equipment, net		995,537			891,728
Other Assets
Other receivables		210,000			330,000
Deposits		17,980			19,469
Intangible assets		81,323			89,960
Total other assets		309,303			439,429
Total Assets	$	11,203,560		$	9,969,897
LIABILITIES AND STOCKHOLDERS' EQUITY
Current Liabilities
Accounts payable and accrued expenses	$	2,980,885		$	2,076,809
Income taxes payable		331,000			-
Short term loan, net of finance charges		626,129			833,735
Total current liabilities		3,938,014			2,910,544
Deferred tax liabilities		88,468			40,680
Commitments and contingencies
Stockholders' Equity
Preferred stock, $.001 par value, 1,120,000 shares      authorized, 120,000 shares issued and outstanding		3,000			3,000
Common stock, $.001 par value, 28,000,000 shares       authorized, 5,200,623 shares issued and outstanding		130,008			130,008
Additional paid - in capital		7,314,136			7,307,515
Accumulated other comprehensive loss		(378,431	)		(111,864	)
Retained earnings (accumulated deficit)		108,365			(309,986	)
Total stockholders' equity		7,177,078			7,018,673
Total Liabilities and Stockholders' Equity	$	11,203,560		$	9,969,897

The accompanying notes are an integral part of these consolidated financial statements.

F-3

---

LEATT CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)
FOR THE YEARS ENDED DECEMBER 31, 2014 AND 2013

		2014			2013
Revenues	$	18,458,928		$	14,891,667
Cost of Revenues		8,636,546			7,158,943
Gross Profit		9,822,382			7,732,724
Product Royalty Income		190,961			953,893
Operating Expenses
Salaries and wages		2,302,115			2,134,815
Commissions and consulting expenses		581,601			545,846
Professional fees		1,117,887			1,228,514
Advertising and marketing		1,442,450			1,492,086
Office rent and expenses		244,510			256,407
Research and development costs		1,222,209			1,170,039
Bad debt expense (recovery)		75,285			(5,218	)
General and administrative expenses		2,081,339			2,097,155
Depreciation		304,690			334,049
Total operating expenses		9,372,086			9,253,693
Income (loss) from Operations		641,257			(567,076	)
Other Income
Interest and other income, net		10,854			20,020
Total other income		10,854			20,020
Income (Loss) Before Income Taxes		652,111			(547,056	)
Income Taxes		233,760			(171,880	)
Net Income (Loss) Available to Common Shareholders	$	418,351		$	(375,176	)
Net Income (Loss) per Common Share
Basic	$	0.08		$	(0.07	)
Diluted	$	0.08		$	(0.07	)
Weighted Average Number of Common Shares Outstanding
Basic		5,200,623			5,200,623
Diluted		5,200,623			5,200,623
Comprehensive Income (Loss)
Net Income (loss)	$	418,351		$	(375,176	)
Other comprehensive loss, net of $148,000 and $-0- deferred
income taxes in 2014 and 2013
Foreign currency translation		(266,567	)		(276,099	)
Total Comprehensive Income (Loss)	$	151,784		$	(651,275	)

The accompanying notes are an integral part of these consolidated financial statements.

F-4

---

LEATT CORPORATION
CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS' EQUITY
AS OF AND FOR THE YEARS ENDED DECEMBER 31, 2014 AND 2013

																	Accumulated
																	Other			Retained
														Additional			Comprensive			Earnings
		Preferred Stock A						Common Stock						Paid - In			Income			(Accumulated
		Shares			Amount			Shares			Amount			Capital			(Loss)			Deficit)			Total
Balance, January 1, 2013		120,000		$	3,000			5,200,623		$	130,008		$	7,302,352		$	164,235		$	65,190		$	7,664,785
Compensation cost recognized in connection with stock options		-			-			-			-			5,163			-			-			5,163
Net loss		-			-			-			-			-			-			(375,176	)		(375,176	)
Foreign currency translation adjustment		-			-			-			-			-			(276,099	)		-			(276,099	)
Balance, December 31, 2013		120,000		$	3,000			5,200,623		$	130,008		$	7,307,515		$	(111,864	)	$	(309,986	)	$	7,018,673
Compensation cost recognized in connection with stock options		-			-			-			-			6,621			-			-			6,621
Net income		-			-			-			-			-			-			418,351			418,351
Foreign currency translation adjustment		-			-			-			-			-			(266,567	)		-			(266,567	)
Balance, December 31, 2014		120,000		$	3,000			5,200,623		$	130,008		$	7,314,136		$	(378,431	)	$	108,365		$	7,177,078

The accompanying notes are an integral part of these consolidated financial statements.

F-5

---

LEATT CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
FOR THE YEARS ENDED DECEMBER 31, 2014 AND 2013

		2014			2013
Cash flows from operating activities
Net income (loss)	$	418,351		$	(375,176	)
Adjustments to reconcile net income (loss) to net cash provided by
operating activities:
Depreciation		304,690			334,049
Deferred income taxes		49,788			(60,320	)
Stock-based compensation		6,621			5,163
Bad debts		44,373			(6,557	)
Inventory reserve		29,938			131,655
Gain on sale of property and equipment		(4,291	)		(15,465	)
(Increase) decrease in:
Accounts receivable		(1,144,398	)		400,095
Inventory		(174,518	)		380,003
Payments in advance		(201,104	)		24,408
Prepaid expenses and other current assets		98,447			(218,337	)
Income tax refunds receivable		(25,000	)		(299	)
Other receivables		120,000			(330,000	)
Deposits		1,489			25,026
Increase (decrease) in:
Accounts payable and accrued expenses		904,076			76,255
Income taxes payable		331,000			(115,000	)
Net cash provided by operating activities		759,462			255,500
Cash flows from investing activities
Capital expenditures		(463,105	)		(255,025	)
Proceeds from sale of property and equipment		6,699			23,302
Increase (decrease) in short-term investments, net		(23	)		253,133
Net cash provided by (used in) investing activities		(456,429	)		21,410
Cash flows from financing activities
Rrepayments of short-term loan, net		(207,606	)		(3,986	)
Net cash used in financing activities		(207,606	)		(3,986	)
Effect of exchange rates on cash and cash equivalents		(205,732	)		(105,583	)
Net increase (decrease) in cash and cash equivalents		(110,305	)		167,341
Cash and cash equivalents - beginning of year		835,012			667,671
Cash and cash equivalents - end of year	$	724,707		$	835,012
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:
Cash paid for interest	$	14,095		$	14,745
Cash paid for income taxes	$	440		$	2,419
Other noncash investing and financing activities
Common stock issued for services	$	6,621		$	5,163

The accompanying notes are an integral part of these consolidated financial statements.

F-6

---

LEATT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
DECEMBER 31, 2014 AND 2013

NOTE 1 -	DESCRIPTION OF BUSINESS AND NATURE OF OPERATIONS
	Leatt Corporation (the “Company”) designs, develops, markets and distributes personal protective equipment for participants in all forms of motor sports and leisure activities, including riders of motorcycles, bicycles, snowmobiles and ATVs. The Company’s flagship products are based on the Leatt-Brace® system, a patented injection molded neck protection system owned by Xceed Holdings CC (“Holdings”), designed to prevent potentially devastating injuries to the cervical spine and neck. The Company has the exclusive global manufacturing, distribution, sale and use rights to the Leatt-Brace®, pursuant to a license agreement between the Company and Holdings, a South African incorporated company owned and controlled by the Company’s Chairman and founder, Dr. Christopher Leatt. The Company also has the right to use apparatus embodying, employing and containing the Leatt-Brace® technology and has designed, developed, marketed and distributed other personal protective equipment.
	The Company’s products are manufactured in China and sold to customers worldwide through a global network of distributors and dealers. Leatt also acts as the original equipment manufacturer for neck braces and other personal protective equipment sold by other international brands.
	The Company was incorporated in the State of Nevada on March 11, 2005, under the name Treadzone, Inc. On June 17, 2005, the Company changed its name to Leatt Corporation in connection with the Company’s acquisition of rights to use the Leatt neck brace patents and trademarks. The Company conducts business in South Africa as a foreign registered branch, and in the United States through the Company’s wholly-owned subsidiary, Two Eleven Distribution, LLC (“Two Eleven”) a California limited liability company. Research and development efforts, global sales and global operations are managed out of the Company’s foreign registered branch located in Cape Town, South Africa. Two Eleven acts as a distributor of Leatt-Brace® products in the United States. Global marketing and United States sales are managed by Two Eleven located in Santa Clarita, California. The Company also has a wholly-owned subsidiary, Three Eleven Distribution (“Three Eleven”) which was an inactive South African incorporated company until December 2008, when it acquired South African registered patents relating to products unrelated to the Leatt-Brace® from Holdings. The Company established a wholly-owned subsidiary, Leatt New Zealand Limited (“New Zealand Limited”) during the first quarter of 2009. This Company acted as the distributor of Leatt-Brace® products in New Zealand, until the 4th quarter of 2011 when operations of New Zealand Limited ceased. The Company has appointed an unrelated third party distributor to distribute its products in the New Zealand market.
NOTE 2 -	SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
	Principles of Consolidation - The accompanying consolidated financial statements include the accounts of Leatt Corporation and its wholly-owned subsidiaries: Two Eleven Distribution, LLC, Three Eleven Distribution (Pty) Ltd and Leatt New Zealand Limited. All significant intercompany transactions have been eliminated.
	Use of Estimates - The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts of assets and liabilities and the disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
	Revenue and Cost Recognition - All manufacturing of Leatt-Brace products is performed by third party subcontractors in China. The Company's products are sold worldwide to a global network of distributors, dealers and directly to consumers when there are no dealers or distributors in their geographic area (collectively the "customers"). Revenues from product sales are recognized when earned, net of applicable provisions for discounts and returns and allowances in the event of product defect.
	Revenue is considered to be realized or realizable and earned when all of the following criteria are met: title and risk of loss have passed to the customer, persuasive evidence of an arrangement exists, delivery has occurred, the price is fixed and determinable and collectability is reasonably assured.

F-7

---

NOTE 2 -	SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)
	Revenue and Cost Recognition (Continued) - Since the Company (through its wholly owned subsidiary) serves as the distributor of Leatt products in the United States, the Company records its revenue and related cost of revenue for its product sales in the United States upon shipment of the merchandise to the dealer or to the ultimate consumer when there is no dealer in the geographic area and the sales order was received directly from, and paid by, the ultimate consumer. Since the Company (through its South African branch) serves as the distributor of Leatt products in South Africa, the Company records its revenue and related cost of revenue for its product sales in South Africa upon shipment of the merchandise from the branch to the dealer. International sales (other than in South Africa) are generally drop-shipped directly from the third party manufacturer to the international distributors.
	Revenue and related cost of revenue is recognized at the time of shipment from the manufacturer's port when the shipping terms are Free On Board ("FOB") shipping point, Cost and Freight ("CFR") or Cost and Insurance to named place ("CIP") as legal title and risk of loss to the product pass to the distributor. Sales to all customers (distributors, dealers and consumers) are generally final; however, in limited instances, product may be returned due to product quality issues. If a distributor relationship were to be terminated by Leatt, then product return may occur. Historically, returns due to product quality issues have not been material and there have been no distributor terminations that resulted in product returns. Cost of revenues also includes royalty fees associated with sales of Leatt-Brace products.
	Product royalty income is recorded as the underlying product sales occur, in accordance with the related licensing arrangements.
	Short-term investments - The Company’s short-term investments consists of a certificate of deposit with a maturity of greater than three months but less than twelve months.
	Accounts Receivable and Allowance for Doubtful Accounts - Accounts receivable consist of amounts due to the Company from normal business activities. Credit is granted to substantially all distributors on an unsecured basis. The Company continuously monitors collections and payments from customers and maintains an allowance for doubtful accounts receivable based upon historical experience and any specific customer collection issues that have been identified. In determining the amount of the allowance, management is required to make certain estimates and assumptions.
	Accounts receivable balances that are still outstanding after management has used reasonable collection efforts are written off as uncollectible. While such credit losses have historically been minimal, within our expectations and the provisions established, we cannot guarantee that we will continue to experience the same credit loss rates that we have in the past. A significant change in the liquidity or financial position of any of our significant customers could have a material adverse effect on the collectability of our accounts receivable and our future operating results. The allowance for doubtful accounts for the years ended December 31, 2014 and 2013 was $103,066 and $58,693, respectively.
	Inventory – Inventory is stated at the lower of cost or market. Cost is determined using the first-in first-out (FIFO) method. Inventory consists primarily of finished goods. Shipping and handling costs are included in the cost of inventory. In assessing the inventory value, the Company must make estimates and judgments regarding reserves required for product obsolescence, aging of inventory and other issues potentially affecting the saleable condition of products. In performing such evaluations, the Company utilizes historical experience as well as current market information. The reserve for obsolescence for the years ended December 31, 2014 and 2013 was $161,593 and $131,655, respectively.
	Property and Equipment - Property and equipment are recorded at cost. Depreciation is provided using the straight-line method for financial reporting purposes and accelerated methods for income tax purposes over the estimated useful lives of the respective assets. The estimated useful lives of assets for financial reporting purposes are as follows: moulds and tools, 2 to 5 years; computer equipment and software, 2 to 5 years; office and other equipment, 3 to 6 years; vehicles, 3 to 5 years; leasehold improvements, 3 years. The costs of improvements that extend the lives of the assets are capitalized. Repairs and maintenance are expensed as incurred. When items of property and equipment are sold or retired, the related costs and accumulated depreciation are removed from the accounts and any gain or loss is included in income.

F-8

---

NOTE 2 -	SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)
	Impairment of Long-Lived Assets – The Company reviews its long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to undiscounted future net cash flows to be generated by the assets. Based on these reviews, no asset impairment charges were made to the carrying value of long-lived assets during the years ended December 31, 2014 and 2013.
	Intangible Assets – The Company’s intangible assets consist of acquired patents with an indefinite useful life and are thus not amortized. Intangible assets are carried at cost less impairment. There was no impairment of intangible assets at December 31, 2014 or 2013.
	Short-term Loan – The Company carries product liability insurance policies with a U.S and South African-based insurance carrier. The Company finances payment of its product liability insurance premiums over the period of coverage, which is generally twelve months. The previous short-term loan was payable in monthly installments of $91,014 over eleven months including interest at 2.647% and has been paid in full. The current short-term loan is payable in monthly installments of $68,273 over eleven months including interest at 2.647%.
	The Company carries directors and officers liability insurance. The Company finances payment of its short-term insurance premiums over a period of coverage, which is generally twelve months. The short-term loan is payable in eleven payments of $4,997 at 2.647% annual interest rate.
	Preferred Stock - The Company's preferred stock, when issued, is generally convertible to common stock at or above the then current market price of the Company's common stock and therefore, contains no beneficial conversion feature. The Preferred Stock is convertible on a 1:1 ratio to common stock. Each holder of the Preferred Stock is not entitled to receive dividends and is entitled to 100 votes for each one share of Preferred Stock.
	Shipping and Handling Costs – The Company includes shipping and handling fees billed to customers in revenues and shipping and handling costs incurred in cost of revenues.
	Advertising - Costs of advertising and marketing are expensed as incurred.
	Patent-related Costs – In connection with the Company’s license agreement with Holdings, the Company incurs legal costs associated with approved patents and patent applications in various jurisdictions which are expensed as incurred and classified as professional fees in the consolidated statements of operations. Patent-related costs totaled $97,525 and $121,963, respectively for the years ended December 31, 2014 and 2013.
	Research and Development – Research and development costs are expensed as incurred and include the salaries of those individuals directly involved in research and development.
	Foreign Currency Translation and Foreign Currency Transactions - The U.S. dollar is the Company's reporting currency. Assets and liabilities of the Company’s foreign operations, consisting of its South African Branch and New Zealand, denominated in local currencies, SA RAND and NEW ZEALAND DOLLAR respectively, are translated at the rate of exchange at the balance sheet date. Revenues and expenses are translated at the rate of exchange at the date of the transaction in the applicable period. Adjustments resulting from translating foreign functional currency financial statements into U.S. dollars are included in the foreign currency translation adjustment, a component of accumulated other comprehensive income in stockholders' equity. Gains and losses generated by transactions denominated in foreign currencies are recorded in the accompanying statement of operations in the period in which they occur. Net unrealized gains (losses) on foreign currency translation adjustments totaled ($266,567) and ($276,099), respectively, during the years ended December 31, 2014 and 2013.

F-9

---

NOTE 2 -	SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)
	Stock-Based Compensation - The Company accounts for stock based compensation in accordance with the fair- value-base method set forth in FASB ASC Topic 718-10, Stock-Based Compensation, which requires the measurement and recognition of compensation expense for all stock-based awards made to employees and directors, including employee stock options, based on the estimated fair values on the date of grant or the fair value of the services performed. The Company recognizes these compensation costs, net of an estimated forfeiture rate, on a pro rata basis over the requisite service period of each vesting tranche of each award. The Company considers voluntary termination behavior as well as trends of actual option forfeitures when estimating the forfeiture rate.
	Income Taxes - The Company uses the asset and liability approach to account for income taxes. Deferred tax assets and liabilities are determined based on the differences between the financial statement carrying amounts and the income tax basis of assets and liabilities. A valuation allowance is applied against any net deferred tax asset if, based on available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. The provision for income taxes included taxes currently payable, if any, plus the net change during the year in deferred tax assets and liabilities recorded by the Company.
	The Company applies the provisions of FASB ASC Topic 740-10, Accounting for Uncertainty in Income Taxes (“Standard”), which provides that the tax effects from an uncertain tax position can be recognized in the consolidated financial statements only if the position is more likely than not of being sustained upon an examination by tax authorities. An uncertain income tax position will not be recognized if it has less than a 50% likelihood of being sustained. Additionally, the standard provides guidance on derecognition, classification, interest and penalties; accounting in interim periods, disclosure and transition, and any amounts when incurred would be recorded under these provisions.
	The Company’s practice is to recognize interest and/or penalties related to income tax matters in income tax expense. As of December 31, 2014 and 2013, the Company has no unrecognized tax benefits. The Company's 2011 U.S. income tax return is under examination and the Company is awaiting receipt of the agent's report.
	Net Income Per Share of Common Stock - Basic net income per common share is computed using the weighted- average number of common shares outstanding during the period. Diluted net income per share is computed using the weighted–average number of common stock shares and dilutive potential common shares outstanding during the period. For the years ended December 31, 2014 and 2013, the Company had 410,200 potential common shares, consisting of 120,000 preferred shares and 290,200 stock options outstanding, that were anti-dilutive and therefore not included in diluted net income per share.
	Comprehensive Income - Comprehensive income is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources, including foreign currency translation adjustments and unrealized gains and losses on marketable securities. Accumulated comprehensive income/loss at December 31, 2014 and 2013 represents cumulative translation adjustments related to the Company’s foreign registered branch office and subsidiaries. The Company presents comprehensive income in the consolidated statements of operations and comprehensive income.
	Fair Value of Financial Instruments - The carrying amount reported in the consolidated balance sheets for cash and cash equivalents, short-term investments, accounts receivable, inventory, payments in advance, accounts payable and accrued expenses approximate fair value because of the immediate or short-term maturity of these financial instruments.
	Concentration of Credit Risk - The Company maintains cash and cash equivalent balances at several financial institutions that are insured by the Federal Deposit Insurance Corporation (FDIC) up to $250,000. As of December 31, 2014 and 2013, the Company’s uninsured bank balances totaled $535,090 and $705,436, respectively. The Company has not experienced any significant losses on its cash and cash equivalents.
	The Company’s trade receivables are derived from sales to distributors and dealers. The Company has adopted credit policies and standards intended to accommodate industry growth and inherent risk. Management believes that credit risks are moderated by the diversity of the Company’s end customers and geographic sales areas. The Company performs ongoing credit evaluations of its customers’ financial condition and requires collateral as deemed necessary. The Company maintains allowances for potential credit losses as needed.
	The Company has derived, and believes that it will continue to derive, a significant portion of its revenue from a limited number of customers. For the year ended December 31, 2014, the Company's US revenue was concentrated in one customer that accounted for approximately 13% of annual US revenue.

F-10

---

NOTE 2 -	SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)
	Concentration of Credit Risk (Continued) - As of December 31, 2014, $738,780 or 17% of the Company's accounts receivable, was due from this customer. For the years ended December 31, 2014 and 2013, the Company's international revenue was concentrated in two customers that accounted for approximately 24% and 22%, respectively, of annual international revenue. As of December 31, 2014 and 2013, $699,127, or 16%, and $605,077, or 19%, of the Company's accounts receivable, respectively, were due from these international customers.
	The Company generates revenue both in the United States and internationally. For the years ended December 31, 2014 and 2013, annual revenues associated with international customers were $11,025,185 and $9,061,355, or 60% and 61% of total revenue, respectively.
	Statement of Cash Flows - The Company considers all highly liquid debt instruments and other short-term investments with an initial maturity of three months or less from the date of purchase to be cash equivalents.
	Recent Accounting Pronouncements – In April 2014, the Financial Accounting Standards Board (“FASB”) issued an accounting standards update providing new guidance on the requirements for reporting a discontinued operation. The new guidance changes the criteria for reporting discontinued operations and enhances the reporting requirements for discontinued operations. Under the new guidance, a discontinued operation must represent a strategic shift that has or will have a major effect on an entity’s operations and financial results. The revised standard will allow an entity to have certain continuing cash flows or involvement with the component after the disposal, and requires expanded disclosures. The standard is effective for reporting periods beginning after December 15, 2014. Management does not anticipate that the adoption of this standard will have a significant impact on the Company’s consolidated financial statements.
	In May 2014, the FASB issued a comprehensive new standard which amends revenue recognition principles and provides a single set of criteria for revenue recognition among all industries. The new standard provides a five step framework whereby revenue is recognized when promised goods or services are transferred to a customer at an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The standard also requires enhanced disclosures pertaining to revenue recognition in both interim and annual periods. The standard is effective for interim and annual periods beginning after December 15, 2016 and allows for adoption using a full retrospective method, or a modified retrospective method. Management has not yet assessed the method of adoption or the expected impact the new standard will have on the Company’s consolidated financial statements.
	In August 2014, the FASB issued new guidance regarding the Company’s responsibility for disclosure of uncertainties about an entity’s ability to continue as a going concern. Management will be required to evaluate whether there are conditions and events that raise substantial doubt about the entity’s ability to continue as a going concern within one year after the financial statements are issued, and, if so, disclose that fact. Management will be required to make this evaluation for both annual and interim reporting periods, if applicable. The standard is effective for annual periods ending after December 15, 2016 and interim periods ending after December 15, 2016. Management does not anticipate that the adoption of this standard will significantly impact the Company’s consolidated financial statements.
	The Company does not believe there are any other recent accounting pronouncements that would have a material impact on its financial position or results of operations.
NOTE 3 -	INVENTORY
	Inventory consists primarily of finished goods. Shipping and handling costs are included in the cost of inventory. In assessing the inventory value, the Company must make estimates and judgments regarding reserves required for product obsolescence, aging of inventory and other issues potentially affecting the saleable condition of products.

F-11

---

NOTE 3 -	INVENTORY (Continued)
	In performing such evaluations, the Company utilizes historical experience as well as current market information. All products are manufactured by third parties in China and shipped to either a warehouse in California, the corporate offices in South Africa or to distributors throughout South America, Africa, Europe, Asia, Australia and New Zealand. The reserve for obsolescence for the years ended December 31, 2014 and 2013 was $161,593 and $131,655, respectively. During the year ended December 31, 2014 the Company wrote off and destroyed $345,744 of product which was deemed to be obsolete.
NOTE 4 -	PROPERTY AND EQUIPMENT
	Property and equipment as of December 31, 2014 and 2013 consisted of the following:

			2014			2013
	Land	$	418,064		$	462,466
	Moulds and tools		1,849,673			1,507,073
	Computer equipment and software		682,537			654,919
	Office and other equipment		435,216			401,665
	Vehicles		175,034			145,837
	Leasehold improvements		82,159			117,907
		$	3,642,683		$	3,289,867
	Accumulated depreciation		(2,647,146	)		(2,398,139	)
	Property and equipment, net	$	995,537		$	891,728

NOTE 5 -	PAYMENTS IN ADVANCE
	Payments in advance represent upfront payments made to contract manufacturers for the manufacturing of the Company’s products. Payments in advance of $345,406 and $144,302 as of December 31, 2014 and 2013 are recorded in current assets on the consolidated balance sheets.
NOTE 6 -	OTHER RECEIVABLES
	In October 2013, the Company entered into a confidential settlement agreement to resolve alleged patent infringement claims and counter claims, under which the Company will receive a series of payments over time. The amount included in other receivables as of December 31, 2014 represents the amount of payments to be received in 2016 and thereafter.
NOTE 7 -	STOCKHOLDERS’ EQUITY
	On December 6, 2011, the Board of Directors adopted and the shareholders subsequently approved the 2011 Equity Incentive Plan (the "Plan") which provides for, among other incentives, the granting to employees, directors and consultants incentive stock options, non statutory stock options, restricted stock, restricted stock units, stock appreciation rights, performance units and performance shares as the Plan Administrator may determine. The maximum number of shares of common stock which may be issued under the Plan is 460,000. In June 2013, the shareholders approved an increase in the maximum shares from 260,000. The maximum number of shares of common stock that may be awarded to an individual participant in any one fiscal year is 78,000 shares. Options are generally exercisable at the fair market value or higher on the date of grant over a five year period. Shares are generally issued at the fair market value on the date of issuance.

F-12

---

NOTE 7 -	STOCKHOLDERS’ EQUITY (Continued)
	During the year ended December 31, 2014, 90,000 options were granted to key employees and to the outside director at the exercise price of $1.00 per share, exercisable over a 5 year period. 40% of the shares were immediately vested with a compensation expense of $2,426 and 60% of the shares were unvested with unrecognized compensation values of $3,640. The fair value of the stock options granted was estimated at the date of grant using the Black Sholes option-pricing model. Based on the list of assumptions presented below, the fair value of the options granted during the year ended December 31, 2014, was $0.07 per share. In addition, 7,800 options were forfeited during the year ended December 31, 2014.
	During the year ended December 31, 2012, 208,000 stock options were granted at an exercise price of $1.00 per share, exercisable over a 5 year period. Of the options granted in 2012, 60% of the shares were vested with a compensation expense of $15,487 and 40% of the shares were unvested with unrecognized compensation values of $10,325. During the year ended December 31, 2013 an additional 20% of the shares vested with a compensation expense of $5,163. During the year ended December 31, 2014 the last 20% of the shares vested with a compensation expense of $4,194.

		2012	2014
		Options	Options
		Granted	Granted
	Expected term in years	5	5
	Years Risk-free interest rate	2.65%	3.38%
	Expected volatility	0.90%	22.85%
	Expected dividend yield	0.00%	0.00%

	The expected volatility was determined with reference to the historical volatility of the Company's stock. The Company uses historical data to estimate option exercise and employee termination within the valuation model. The expected term of options granted represents the period of time that the options granted are expected to be outstanding. The risk-free interest rate for periods within the contractual life of the option is based on the U.S. Treasury rate in effect at the time of grant.
NOTE 8 -	INCOME TAXES
	The Company’s income tax expense (benefit) for the years ended December 31, 2014 and 2013 consists of the following components:

			2014			2013
	Current
	Federal	$	330,372		$	(113,160	)
	State		1,600			1,600
			331,972			(111,560	)
	Deferred
	Federal		(98,212	)		(60,320	)
			(98,212	)		(60,320	)
	Income tax expense	$	233,760		$	(171,880	)

F-13

---

NOTE 8 -	INCOME TAXES (Continued)
	The Company’s effective income tax expense (benefit) differs from the federal statutory amount because of the effect of the following items:

			2014			2013
	Federal tax statutory rate		34.00%			34.00%
	Effect of prior year (over) under provision		0.00%			6.00%
	Timing and permanent differences		2.00%			-9.00%
			36.00%			31.00%

Deferred income taxes (benefit) reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes, and the tax effects of net operating losses that are available to offset future taxable income. Significant components of the Company’s deferred tax assets (liabilities) at December 31, 2014 and 2013 consist of the following:

			2014			2013
	Deferred tax assets:
	Accounts receivable	$	35,000		$	20,000
	Inventory		55,000			75,000
	Vacation accrual		18,000			15,000
	Net operating loss carryforwards		1,257,000			1,067,000
	Less valuation allowance		(1,257,000	)		(1,067,000	)
	Deferred tax assets, net	$	108,000		$	110,000

	Deferred tax liabilities:
	Depreciation	$	88,468		$	40,680
	Deferred tax liabilities, net	$	88,468		$	40,680

	In assessing the ultimate realization of deferred tax assets and liabilities, management considers whether it is more likely than not that some or all of them will not be realized. Based on the Company’s anticipation of fluctuations in the Company’s net earnings for state tax purposes, the Company has established a valuation allowance due to the uncertainty as to the realization of the net operating loss carry forwards. As of December 31, 2014 and 2013, the Company has approximately $14,221,000 and $12,050,000 of net operating loss carry forwards to offset certain future state taxable income, expiring in 2029.
	The Company files a consolidated federal and separate company state income tax returns in the United States. The Company' 2011 U.S. income tax return is under examination, and the Company is currently waiting to receive the agents report. The Company has not been notified of any proposed changes, however, until receipt or the agent's report no definitive conclusion can be made. As of December 31, 2014, the tax years that remain subject to examination are 2011 to 2014 for federal and 2011 to 2014 for state tax purposes.
	The Company has reviewed its open tax positions and determined that no exposures exist that require an adjustment as of December 31, 2014 or 2013. While the Company believes that it has performed adequate procedures to identify all reasonably identifiable exposures, it is possible that exposures exist and that these exposures will need to be assessed and may potentially have a material impact on the Company’s consolidated financial statements.
NOTE 9 -	RELATED PARTY TRANSACTIONS
	Royalty fees associated with sales of Leatt-Brace® products are paid to Holdings, a company owned by a director, and a related individual who is a shareholder. Royalties are based on 5% of the cash received from net sales of the neck braces worldwide and totaled $480,689 and $465,316 for the years ended December 31, 2014 and 2013. The term of the royalty agreement is for the life of the intellectual property. As of December 31, 2014 and 2013, accrued royalties totaled $69,790 and $76,755.

F-14

---

NOTE 10 -	COMMITMENTS AND CONTINGENCIES
	Office / Warehouse Lease
	The Company’s California entity is leasing office and warehouse space in Santa Clarita, California. The lease commenced on November 1, 2012 and continues through April 30, 2015. The lease agreement calls for monthly base rent in the amount of $9,441.
	In addition, the Company’s South African branch leases space in South Africa. The lease was renewed on December 12, 2014 and continues through December 15, 2016. The lease agreement calls for an initial monthly rent of $5,037.
	Minimum lease payments under non cancellable operating lease agreements in each of the years subsequent to December 31, 2014 are as follows:

	Rent expense totaled $210,185 and $200,170, respectively, for the years ended December 31, 2014 and 2013.
	Litigation/Potential Litigation
	In the ordinary course of business, the Company is involved in various legal proceedings involving product liability and personal injury and intellectual property litigation. The Company is insured against loss for certain of these matters. The Company will record contingent liabilities resulting from asserted and unasserted claims against it when it is probable that a liability has been incurred and the amount of the loss is reasonably estimable. The Company will disclose contingent liabilities when there is a reasonable possibility that the ultimate loss will exceed the recorded liability. While the outcome of the currently pending litigation is not yet determinable, the ultimate exposure with respect to these matters cannot be ascertained. However, based on the information currently available to the Company, the Company does not expect that any liabilities or costs that might be incurred to resolve these matters will have a material adverse effect on the financial condition, results of operations, liquidity or cash flow of the Company.
NOTE 11 –	SUBSEQUENT EVENTS
	The Company has evaluated all subsequent events through March 26, 2015, the date the financial statements were released.

F-15

---

EXHIBIT INDEX

Exhibit Number	Exhibit Title
2.1	Settlement Agreement, dated as of September 25, 2008, between Leatt Corp., Christopher J. Leatt and J. P. De Villiers (incorporated by reference to Exhibit 2.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
2.2	Amendment No. 1 to Settlement Agreement, dated February 4, 2010, between Leatt Corp., Christopher J. Leatt and Jean- Pierre DeVilliers (incorporated by reference to Exhibit 2.2 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
3.1	Amended and Restated Articles of Incorporation, as filed with the Secretary of State of Nevada on October 28, 2008 (incorporated by reference to Exhibit 3.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
3.2	Amended and Restated Bylaws, adopted on October 28, 2008 (incorporated by reference to Exhibit 3.2 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.1	Certificate of Designation of Series A Voting Convertible Preferred Stock, as filed with the Secretary of State of Nevada on October 29, 2008 (incorporated by reference to Exhibit 4.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.2	Leatt Corp. 2011 Equity Incentive Plan (incorporated by reference to Exhibit 4.5 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.3	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Dr. Christopher Leatt (incorporated by reference to Exhibit 4.6 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.4	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Sean Macdonald (incorporated by reference to Exhibit 4.7 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.5	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Philip Davy (incorporated by reference to Exhibit 4.8 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.6	Stock Option Agreement, dated February 1, 2012, between Leatt Corp. and Erik Olsson (incorporated by reference to Exhibit 4.9 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
4.7	Stock Option Agreement, dated February 14, 2014, between Leatt Corp. and Jeffrey Guzy (incorporated by reference to Exhibit 4.10 to the Company’s annual report on Form 10-K, filed on March 19, 2014)
10.1	Patent and Royalty License Agreement, dated March 1, 2006, between Leatt Corp., Xceed Holdings (Pty) Ltd. (formerly, Leatt Brace Holdings (Pty) Ltd.) and J. P. De Villiers Trust (incorporated by reference to Exhibit 10.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.2	Amendment to Patent and Royalty License Agreement, dated as of March 1, 2006, between Leatt Corp. and Xceed Holdings (Pty) Ltd. (formerly, Leatt Brace Holdings (Pty) Ltd.) (incorporated by reference to Exhibit 10.2 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.3	Patent Assignment Agreement, dated January 1, 2009, between Xceed Holdings (Pty) Ltd. and Three Eleven Distribution (Pty) Ltd. (incorporated by reference to Exhibit 10.3 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.4	Software License Agreement, dated July 2, 2010, between Leatt Corp., Esteq Design (Pty) Ltd. and Siemens Industry Software Ltd. (incorporated by reference to Exhibit 10.4 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.5	Copyright Licensing Agreement, dated January 31, 2013, between Silva Mattos & CIA, LTDA and Leatt Corp. (incorporated by reference to Exhibit 10.5 to the Company’s annual report on Form 10-K, filed on March 19, 2014)
10.6	End User Licensing Agreement, dated June 30, 2011, between Bluekey Software Solutions and Leatt Corp. (incorporated by reference to Exhibit 10.6 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.7	Lease Agreement, dated September 11, 2012, between Two Eleven Distribution LLC and Center Pointe Properties, LLC (incorporated by reference to Exhibit 10.7 to the Company’s annual report on Form 10-K, filed on March 28, 2013)
10.8*	Lease Agreement, dated December 12, 2014, between Leatt Corp. and AJ Brutus Investments cc.

---

10.9*	Storage Rental Agreement, dated December 1, 2014, between The Storage Spot and Leatt Corp.
10.10	Leatt Distributor Form Business Terms, dated February 10, 2008 (incorporated by reference to Exhibit 10.11 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
10.11*	Storage Rental Agreement 2, dated January 1, 2012, between The Storage Spot and Leatt Corp.
10.12*	Premium Finance Agreement, dated June 9, 2014, between AFCO Acceptance Corp. and Leatt Corp.
10.13*	Employment Agreement, dated January 1, 2014, between Leatt Corp. and Sean Macdonald (as amended).
10.14*	Premium Finance Agreement, dated January 1, 2015, between Fulcrum Group (Pty) Ltd. and Leatt Corp.
10.15	Service Level Agreement, dated April 24, 2013, between MikroTik SA and Leatt Corp.
10.16*	Employment Agreement, dated May 15, 2014, between Christopher Leatt and Leatt Corp.
10.17*	Promissory Note, dated October 7, 2014, between AFCO Acceptance Corp. and Leatt Corp.
14.1	Code of Ethics (incorporated by reference to Exhibit 14.1 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
21	List of subsidiaries of the registrant (incorporated by reference to Exhibit 21 to the Company’s registration statement on Form 10-12G, filed on October 9, 2012)
31.1*	Certifications of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2*	Certifications of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1*	Certifications of Chief Executive Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2*	Certifications of Chief Financial Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101**	Interactive data files pursuant to Rule 405 of Regulation S-T

______________________

*	Filed herewith
**	Pursuant to Rule 405 of Regulation S-T, the following financial information from the Company’s Annual Report on Form 10-K for the period ended December 31, 2014, is formatted in XBRL interactive data files: (i) Consolidated Balance Sheets at December 31, 2014 and 2013; (ii) Consolidated Statements of Operations and Comprehensive Income (Loss) for the years ended December 31, 2014 and 2013; (iii) Consolidated Statements of Changes in Shareholders’ Equity as of and for the years ended December 31, 2014 and 2013; (iv) Consolidated Statements of Cash Flows for the years ended December 31, 2014 and 2013; and (vi) Notes to Consolidated Financial Statements. Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, or for purposes of Section 18 of the Securities Act of 1934, as amended, and otherwise are not subject to liability under those sections.

---