10-K
Table of Contents

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

Form 10-K

(MARK ONE)

  x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 For the fiscal year ended December 31, 2014

or

 

  ¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 For the transition period from                      to                     

Commission File number 0-23621

MKS INSTRUMENTS, INC.

(Exact Name of Registrant as Specified in Its Charter)

 

Massachusetts   04-2277512

(State or other Jurisdiction of

Incorporation or Organization)

 

(IRS Employer

Identification No.)

2 Tech Drive, Suite 201, Andover, Massachusetts   01810
(Address of Principal Executive Offices)   (Zip Code)

(978) 645-5500

(Registrant’s Telephone Number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

 

Title of class

 

Name of exchange on which registered

Common Stock, no par value   NASDAQ Global Select Market

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     Yes  x        No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.     Yes  ¨        No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  x        No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes  x        No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.     ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer x   Accelerated filer ¨   Non-accelerated filer ¨   Smaller reporting company ¨
  (Do not check if a smaller reporting company)            

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ¨        No  x

Aggregate market value of the voting and non-voting common equity held by nonaffiliates of the registrant as of June 30, 2014 based on the closing price of the registrant’s Common Stock on such date as reported by the NASDAQ Global Select Market: $1,656,697,531.

Number of shares outstanding of the issuer’s Common Stock, no par value, as of February 18, 2015: 53,199,337

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive Proxy Statement for MKS’ Annual Meeting of Stockholders to be held on May 4, 2015 are incorporated by reference into Part III of this Form 10-K.

 

 

 


Table of Contents

TABLE OF CONTENTS

 

PART I   

Item 1.

   Business      2   

Item 1A.

   Risk Factors      9   

Item 1B.

   Unresolved Staff Comments      17   

Item 2.

   Properties      18   

Item 3.

   Legal Proceedings      20   

Item 4.

   Mine Safety Disclosures      20   
PART II   

Item 5.

   Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities      21   

Item 6.

   Selected Financial Data      23   

Item 7.

   Management’s Discussion and Analysis of Financial Condition and Results of Operations      24   

Item 7A.

   Quantitative and Qualitative Disclosures about Market Risk      40   

Item 8.

   Financial Statements and Supplementary Data      41   

Item 9.

   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure      85   

Item 9A.

   Controls and Procedures      85   

Item 9B.

   Other Information      86   
PART III   

Item 10.

   Directors, Executive Officers and Corporate Governance      87   

Item 11.

   Executive Compensation      87   

Item 12.

   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters      87   

Item 13.

   Certain Relationships and Related Transactions and Director Independence      87   

Item 14.

   Principal Accountant Fees and Services      87   
PART IV   

Item 15.

   Exhibits and Financial Statement Schedules      88   

SIGNATURES

     92   

 

1


Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act and Section 21E of the Securities Exchange Act. When used herein, the words “believe,” “anticipate,” “plan,” “expect,” “estimate,” “intend,” “may,” “see,” “will,” “would” and similar expressions are intended to identify forward-looking statements although not all forward looking statements contain these identifying words. These forward-looking statements reflect management’s current opinions and are subject to certain risks and uncertainties that could cause actual results to differ materially from those stated or implied. MKS assumes no obligation to update this information. Risks and uncertainties include, but are not limited to, those discussed in the section entitled “Risk Factors” of this annual report on Form 10-K.

PART I

 

Item 1. Business

MKS Instruments, Inc. (the “Company” or “MKS”) was founded in 1961 as a Massachusetts corporation. We are a global provider of instruments, subsystems and process control solutions that measure, control, power, monitor and analyze critical parameters of advanced manufacturing processes to improve process performance and productivity. We also provide services relating to the maintenance and repair of our products, software, service and maintenance, installation services and training.

We group our products into three groups of similar products based upon the similarity of product function. These three groups of products are: Instruments, Control and Vacuum Products; Power and Reactive Gas Products; and Analytical Solutions Group Products. Our products are derived from our core competencies in pressure measurement and control, materials delivery, gas composition analysis, control and information technology, power and reactive gas generation and vacuum technology. Our products are used in diverse markets, applications and processes. Our primary served markets are manufacturers of semiconductor capital equipment and manufacturers of semiconductor devices, and for other thin film applications including flat panel displays, solar cells, light emitting diodes (“LEDs”), data storage media and other advanced coatings. We also leverage our technology into other markets with advanced manufacturing processes including medical equipment, pharmaceutical manufacturing, energy generation and environmental monitoring.

We have four reportable segments: Advanced Manufacturing Capital Equipment; Analytical Solutions Group; Europe Region Sales & Service; and Asia Region Sales & Service. The Advanced Manufacturing Capital Equipment segment includes the development, manufacture, sales and servicing of instruments and control products, power and reactive gas products, materials delivery products and vacuum products, all of which are utilized in semiconductor processing and other similar advanced manufacturing processes. Sales in this segment include both external sales and intercompany sales (which are recorded at agreed upon transfer prices). External sales of these products made in Europe or Asia are reported as sales in the Europe Region Sales & Service or Asia Region Sales & Service segments. The Analytical Solutions Group includes gas composition analysis, information technology products and custom fabrication services. The Europe and Asia region sales and service segments mainly resell and service the Advanced Manufacturing Capital Equipment and Analytical Solutions Group products sold into their respective regions. For further information on our segments please see Note 21 to the Notes to the Consolidated Financials contained in this Annual Report on Form 10-K.

Since our inception, we have focused on satisfying the needs of our customers by establishing long-term, collaborative relationships. We have a diverse base of customers that includes manufacturers of semiconductor capital equipment and semiconductor devices; thin film capital equipment used in the manufacture of flat panel displays; LEDs, solar cells, data storage media and other coating applications; and other industrial, medical, pharmaceutical manufacturing, energy generation, environmental monitoring and other advanced manufacturing companies, as well as university, government and industrial research laboratories.

 

2


Table of Contents

We file reports, proxy statements and other documents with the Securities and Exchange Commission (“SEC”). You may read and copy any document we file at the SEC Headquarters at the Office of Investor Education and Assistance, 100 F Street, NE, Washington, D.C. 20549. You should call 1-800-SEC-0330 for more information on the public reference room. Our SEC filings are also available to you on the SEC’s internet site at http://www.sec.gov.

Our internet address is http://www.mksinst.com. We are not including the information contained in our website as part of, or incorporating it by reference into, this annual report on Form 10-K. We make available free of charge through our internet site our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as soon as reasonably practicable after we electronically file such materials with, or furnish them to the SEC.

Markets and Applications

We are focused on improving process performance and productivity by measuring, controlling, powering, monitoring and analyzing advanced manufacturing processes in semiconductor, thin film and certain other advanced market sectors. Approximately 70%, 68% and 62% of our net revenues for the years 2014, 2013 and 2012, respectively, were to semiconductor capital equipment manufacturers and semiconductor device manufacturers. Approximately 30%, 32% and 38% of our net revenues in the years 2014, 2013 and 2012, respectively, were for other advanced manufacturing applications. These include, but are not limited to, thin film processing equipment applications such as flat panel displays; LEDs, solar cells, data storage media and other thin film coatings; as well as medical equipment, pharmaceutical manufacturing, energy generation and environmental monitoring processes; other industrial manufacturing; and university, government and industrial research laboratories.

During the years 2014, 2013 and 2012, international net revenues accounted for approximately 43%, 46% and 49% of our total net revenues, respectively. Net revenues from our Japan and Korea subsidiaries were 20%, 20% and 23% of our total net revenues for the years 2014, 2013 and 2012, respectively. Long-lived assets, excluding long-term income tax receivables located in the U.S. were $57.7 million, $60.7 million and $62.2 million as of December 31, 2014, 2013 and 2012, respectively. Long-lived assets, excluding long-term income tax receivable located outside of the U.S. were $17.0 million, $19.0 million, and $20.5 million as of December 31, 2014, 2013 and 2012, respectively.

Semiconductor Manufacturing Applications

The majority of our sales are derived from products sold to semiconductor capital equipment manufacturers and semiconductor device manufacturers. Our products are used in the major semiconductor processing steps such as depositing thin films of material onto silicon wafer substrates and etching and cleaning circuit patterns. In addition, we provide specialized instruments and software to monitor and analyze process performance.

We anticipate that the semiconductor manufacturing market will continue to account for a substantial portion of our sales. While the semiconductor device manufacturing market is global, major semiconductor capital equipment manufacturers are concentrated in China, Japan, Korea, Taiwan and the United States.

Other Advanced Manufacturing Applications

Our products are used in the manufacture of flat panel displays, LEDs, data storage media, solar cells and other coating applications, including architectural glass, that require the same or similar thin film processes as semiconductor manufacturing.

 

3


Table of Contents

Flat Panel Display Manufacturing

Flat panel displays are used in electronic hand-held devices, laptop computers, desktop computer monitors and television sets. We sell products to flat panel display equipment manufacturers and to end-users in the flat panel display market. Major manufacturers of flat panel displays are concentrated in China, Japan, Korea and Taiwan, and major manufacturers of flat panel display equipment are concentrated in China, Japan, Korea and the United States. The transition to larger panel sizes and higher display resolution is driving the need for improved process control to reduce defects.

Light Emitting Diodes

LEDs are made using vacuum processes similar to semiconductor chip manufacturing. Because of their high brightness and long life, as well as environmentally friendly benefits such as lower power consumption, LEDs have experienced rapid acceptance in back side lighting of flat screen television displays and in general lighting applications.

Solar Cells

Our products are used in crystalline silicon and thin film processes to manufacture photovoltaic cells. Crystalline silicon technology requires wafer based deposition systems and is currently the dominant manufacturing technology in the solar panel industry.

Data Storage Media

Our products are used to manufacture storage media that store and read data magnetically; optical storage media that store and read data using laser technology; hard disks; data storage devices; and digital video discs.

The transition to higher density storage capacity requires manufacturing processes incorporating tighter process controls. Major manufacturers of storage media are concentrated in Japan and the Asia Pacific region, and major manufacturers of storage media capital equipment are concentrated in Europe, Korea and the United States.

Other Advanced Coatings

Thin film coatings for diverse applications such as architectural glass and packaging are deposited using processes similar to those used in semiconductor manufacturing. Thin film processing manufacturers are concentrated in Europe, Korea and the United States.

Other Advanced Applications

Our products are used in other advanced applications, including energy generation and environmental monitoring processes such as nuclear fuel processing, fuel cell research, greenhouse gas monitoring, and chemical agent detection; medical instrument sterilization; consumable medical supply manufacturing and pharmaceutical applications. Our power delivery products are also incorporated into other end-market products such as medical imaging equipment. In addition, our products are sold to government, university and industrial laboratories for vacuum applications involving research and development in materials science, physical chemistry and electronics materials. Major equipment and process providers and research laboratories are concentrated in Europe, Korea and the United States.

Product Groups

We group our products into three product groups, based upon the similarity of the product function, type of product and manufacturing processes. These three groups of products are: Instruments, Control and Vacuum Products; Power and Reactive Gas Products; and Analytical Solutions Group Products.

 

4


Table of Contents

Instruments, Control and Vacuum Products

This product group includes pressure measurement and control, materials delivery, control products and vacuum products.

Pressure Measurement and Control Products.    Each of our pressure measurement and control product lines consists of products that are designed for a variety of pressure ranges and accuracies.

Baratron® Pressure Measurement Products.    These products are typically used to measure the pressure of the gases being distributed upstream of the process chambers, process chamber pressures and pressures between process chambers, vacuum pumps and exhaust lines. We believe we offer the widest range of gas pressure measurement instruments in the semiconductor and advanced thin film materials processing industries.

Automatic Pressure and Vacuum Control Products.    These products enable precise control of process pressure by electronically actuating valves that control the flow of gases in and out of the process chamber to minimize the difference between desired and actual pressure in the chamber.

In most cases, Baratron® pressure measurement instruments provide the pressure input to the automatic pressure control device. Together, these components create an integrated automatic pressure control subsystem. Our pressure control products can also accept inputs from other measurement instruments, enabling the automatic control of gas input or exhaust based on parameters other than pressure.

Materials Delivery Products.    Each of our materials delivery product lines combines MKS flow, pressure measurement and control technologies to provide customers with integrated subsystems and precise control capabilities that are optimized for a given application.

Flow Measurement and Control Products.    Flow measurement products include gas flow measurement products based upon thermal conductivity and pressure technologies. The flow control products combine the flow measurement device with valve control elements based upon solenoid, piezo-electric and piston pump technologies. These products measure and automatically control the mass flow rate of gases into the process chamber.

Control Products.    We design and manufacture a suite of products that allow semiconductor and other manufacturing customers to better control their processes through computer-controlled automation. These products include digital control network products, process chamber, system controllers and connectivity products.

Digital control network products are used to connect sensors, actuators and subsystems to the chamber and system control computers. They support a variety of industry-standard connection methods as well as conventional discrete digital and analog signals. Chamber and system control computers process these signals in real time and allow customers to precisely manage the process conditions.

Connecting sensors, chambers and tools to the factory network is essential for improving quality and productivity. Our connectivity products allow information to flow from the process sensors and subsystems and from the process tool control computer to the factory network. By enabling this information flow, we believe that we help customers optimize their processes through advanced process control, and diagnose equipment problems from a remote location, which is referred to as “e-diagnostics.”

Vacuum Products.    This group of products consists of vacuum technology products, including vacuum containment components, vacuum gauges, vacuum valves, effluent management subsystems and custom stainless steel chambers, vessels and pharmaceutical process equipment hardware and housings.

 

5


Table of Contents

Vacuum Gauging Products.    We offer a wide range of vacuum instruments consisting of vacuum measurement sensors and associated power supply and readout units as well as transducers where the sensor and electronics are integrated within a single package. These gauges complement our Baratron® capacitance manometers for medium and high vacuum ranges. Our indirect gauges use thermal conductivity and ionization gauge technologies to measure pressure and vacuum levels, and our direct gauges use the pressure measurement technology of a Micro-electromechanical systems (MEMS)-based piezo sensor.

Vacuum Valves, Stainless Steel Components, Process Solutions and Custom Stainless Steel Hardware.    Our vacuum valves are used for vacuum isolation of vacuum lines, load locks, vacuum chambers and pumps for chamber isolation and vacuum containment. Our vacuum process solutions consist of vacuum fittings, traps and heated lines that are used downstream from the semiconductor process chamber to control process effluent gases by preventing condensable materials from depositing particles near or back into the process chamber.

Custom Manufactured Components.    Our design and manufacturing facilities build high purity chambers for material and thin film coating processes. We design and build custom panels, weldments, American Society of Manufacturing Engineers vessels and housings, as well as a line of Bioprocessing Equipment Standard certified components for biopharmaceutical processes.

Power and Reactive Gas Products

This group of products includes power delivery and reactive gas generation products used in semiconductor and other thin film applications and in medical imaging equipment applications.

Power Delivery Products.    We design and manufacture microwave, direct current and radio frequency power delivery systems as well as radio frequency matching networks and metrology products. In the semiconductor, thin film and other market sectors, our power supplies are used to provide energy to various etching, stripping and deposition processes. Our power amplifiers are also used in medical imaging equipment.

Reactive Gas Generation Products.    We design and manufacture reactive gas generation products, which create reactive species. A reactive species is an atom or molecule in an unstable state, which is used to facilitate various chemical reactions in processing of thin films (deposition of films, etching and cleaning of films and surface modifications). A number of different technologies are used to create reactive gas including different plasma technologies and barrier discharge technologies.

Our reactive gas products include ozone generators and subsystems used for deposition of insulators onto semiconductor devices, ozonated water delivery systems for advanced semiconductor wafer and flat panel display cleaning, microwave plasma based products for photo resist removal and a line of remote plasma generators which provide reactive gases for a wide range of semiconductor, flat panel and other thin film process applications.

As materials are deposited on wafers, films, or solar cells, the deposited material also accumulates on the walls of the vacuum process chamber. Our atomic fluorine generators are used to clean the process chambers between deposition steps to reduce particulates and contamination caused by accumulated build up on the chamber walls.

Analytical Solutions Group Products

This product group includes gas composition analysis products, information technology products and custom fabrication services.

Gas Composition Analysis Products.    Gas composition analysis instruments are sold to a wide variety of industries including the engine development, environmental emissions monitoring, air safety monitoring and semiconductor industries.

 

6


Table of Contents

Mass Spectrometry-Based Gas Composition Analysis Instruments.    These products are based on quadrupole mass spectrometer sensors that separate gases based on molecular weight. These sensors include built-in electronics and software that analyzes the composition of background and process gases in the process chamber. These instruments are provided both as bench top laboratory systems and as process gas monitoring systems used in the diagnosis of semiconductor manufacturing process systems.

Fourier Transform Infra-Red (FTIR) Based Gas Composition Analysis Products.    FTIR-based products provide information about the composition of gases by measuring the absorption of infra-red light as it passes through the sample being measured. Gas analysis applications include measuring the compositions of mixtures of reactant gases; measuring the purity of individual process gases; measuring the composition of process exhaust gas streams to determine process health; monitoring emissions to ensure environmental compliance and monitoring ambient air for safety. These instruments are provided as standalone monitors and as process gas monitoring systems.

Mass spectrometry-based and FTIR-based gas monitoring systems can indicate out-of-bounds conditions, such as the presence of undesirable contaminant gases and water vapor or out-of-tolerance amounts of specific gases in the process, which alert operators to diagnose and repair faulty equipment.

Information Technology Products.    We design software products including design of experiment and multivariate analysis software for analyzing large and complex data sets. Our focus is on providing solutions which improve the quality and yield of manufacturing processes for the pharmaceutical, biotech and other industries.

Custom Fabrication.    Our fabrication facility builds precision machined components and electromechanical assemblies for the analytical instrument, scientific, semiconductor and medical industries to ultra-high vacuum standards.

Customers

Our largest customers include leading semiconductor capital equipment manufacturers such as Applied Materials, Inc. and Lam Research Corporation. Revenues to our top ten customers accounted for approximately 50%, 46% and 42% of net revenues for the years 2014, 2013 and 2012, respectively. Applied Materials, Inc. accounted for approximately 19%, 17% and 14% and Lam Research Corporation accounted for 13%, 12% and 10% of our net revenues for the years 2014, 2013 and 2012, respectively.

Sales, Marketing, Service and Support

Our worldwide sales, marketing, service and support organization is critical to our strategy of maintaining close relationships with semiconductor capital equipment and device manufacturers and manufacturers of other advanced applications. We sell our products primarily through our direct sales force. As of December 31, 2014, we had 161 sales employees worldwide, located in China, Germany, Italy, Japan, Korea, the Netherlands, Singapore, Sweden, Taiwan, the United Kingdom and the United States. We also maintain sales representatives and agents in a number of countries, who supplement our direct sales force. We maintain a marketing staff that identifies customer requirements, assists in product planning and specifications, and focuses on future trends in semiconductor and other markets.

As semiconductor device manufacturers have become increasingly sensitive to the significant costs of system downtime, they have required that suppliers offer comprehensive local repair service and close customer support. Manufacturers require close support to enable them to repair, modify, upgrade and retrofit their equipment to improve yields and adapt new materials or processes. To meet these market requirements, we maintain internal worldwide sales and support organizations in nine countries and external third party worldwide sales and support organizations in six countries. Technical support is provided from offices in China, Germany, Japan, Korea, Singapore, Taiwan, the United Kingdom and the United States. Repair and calibration services are

 

7


Table of Contents

provided at seventeen internal and four third party service depots located worldwide. We typically provide warranties from one to three years, depending upon the type of product, with the majority of our products ranging from one to two years.

Research and Development

Our products incorporate sophisticated technologies to power, measure, control and monitor increasingly complex gas-related semiconductor and other advanced manufacturing processes, thereby enhancing uptime, yield and throughput for our customers. Our products have continuously advanced as we strive to meet our customers’ evolving needs. We have developed, and continue to develop, new products to address industry trends, such as the shrinking of integrated circuit critical dimensions to 14 nanometers and below and, in the flat panel display and solar markets, the transition to larger substrate sizes, which require more advanced process control technology. In addition, we have developed, and continue to develop, products that support the migration to new classes of materials, ultra-thin layers, and new structures such as copper for low resistance conductors, high-k dielectric materials for capacitors and gates and low-k dielectric materials for low loss insulators and 3D structures that are used in small geometry manufacturing. We involve our marketing, engineering, manufacturing and sales personnel in the development of new products in order to reduce the time to market for new products. Our employees also work closely with our customers’ development personnel, helping us to identify and define future technical needs on which to focus research and development efforts. We support research at academic institutions targeted at advances in materials science and semiconductor process development.

As of December 31, 2014, we had 348 research and development employees, primarily located in the United States. Our research and development expenses were $62.9 million, $63.6 million and $60.1 million for the years 2014, 2013 and 2012, respectively. Our research and development efforts include numerous projects, none of which are individually material, and generally have a duration of 3 to 30 months depending upon whether the product is an enhancement of existing technology or a new product. Our current initiatives include projects to enhance the performance characteristics of older products, to develop new products and to integrate various technologies into subsystems.

Manufacturing

Our primary manufacturing facilities are located in the United States, China, Mexico, Korea, Germany, the United Kingdom and Israel. Manufacturing activities include the assembly and testing of components and subassemblies, which are integrated into our products. We outsource some of our subassembly work. We purchase a wide range of electronic, mechanical and electrical components, some of which are designed to our specifications. We consider our lean manufacturing techniques and responsiveness to customers’ significantly fluctuating product demands to be a competitive advantage. As of December 31, 2014, we had 1,555 manufacturing related employees, located mostly in the United States and China.

Competition

The market for our products is highly competitive. Principal competitive factors include:

 

   

historical customer relationships;

 

   

product quality, performance and price;

 

   

breadth of product line;

 

   

manufacturing capabilities; and

 

   

customer service and support.

Although we believe that we compete favorably with respect to these factors, there can be no assurance that we will continue to do so.

 

8


Table of Contents

We encounter substantial competition in most of our product lines, although no single competitor competes with us across all product lines. Certain of our competitors may have greater financial and other resources than we do. In some cases, competitors are smaller than we are, but are well established in specific product niches. Hitachi and Horiba offer materials delivery products that compete with our product line of mass flow controllers. Nor-Cal Products, Inc. and VAT, Inc. offer products that compete with our vacuum components. Inficon offers products that compete with our vacuum measurement and gas analysis products and our vacuum gauging products. Advanced Energy offers products that compete with our power delivery and reactive gas generator products.

Patents and Other Intellectual Property Rights

We rely on a combination of patent, copyright, trademark and trade secret laws and license agreements to establish and protect our proprietary rights. As of December 31, 2014, we owned 376 U.S. patents and 696 foreign patents that expire at various dates through 2034. As of December 31, 2014, we had 77 pending U.S. patent applications. Foreign counterparts of certain U.S. applications have been filed or may be filed at the appropriate time.

We require each of our employees, including our executive officers, to enter into standard agreements pursuant to which the employee agrees to keep confidential all of our proprietary information and to assign to us all inventions while they are employed by us.

Employees

As of December 31, 2014, we employed 2,371 persons. We believe that our ongoing success depends upon our continued ability to attract and retain highly skilled employees for whom competition is intense. None of our employees is represented by a labor union or is party to a collective bargaining agreement. We believe that our employee relations are good.

Acquisitions

On May 30, 2014, we acquired Granville-Phillips (“GP”), a division of Brooks Automation, Inc. (“Brooks”), for $87 million. GP is a leading global provider of vacuum measurement and control instruments to the semiconductor, thin film and general industrial markets.

On March 12, 2013, we acquired Alter S.r.l. (“Alter”) located in Reggio Emilia, Italy. Alter develops advanced microwave power generators, components and systems for industrial microwave heating, microwave plasma coating and semiconductor applications. The purchase price net of cash acquired and after final debt and working capital post-close adjustments, was $2.4 million.

On August 29, 2012, we acquired Plasmart, Inc. (“Plasmart”) located in Daejeon, Korea. Plasmart develops radio frequency (RF), plasma generation and monitoring systems for the semiconductor, flat panel display, active matrix organic light emitting diodes and solar photovoltaic industries. The purchase price was $22.6 million, net of $0.1 million of cash acquired.

 

Item 1A. Risk Factors

The following factors could materially affect MKS’ business, financial condition or results of operations and should be carefully considered in evaluating the Company and its business, in addition to other information presented elsewhere in this report.

 

9


Table of Contents

Our business depends substantially on capital spending in the semiconductor industry, which is characterized by periodic fluctuations that may cause a reduction in demand for our products.

Approximately 70%, 68% and 62% of our net revenues for the years 2014, 2013 and 2012, respectively, were to semiconductor capital equipment manufacturers and semiconductor device manufacturers, and we expect that sales to such customers will continue to account for a substantial portion of our sales. Our business depends upon the capital expenditures of semiconductor device manufacturers, which in turn depends upon the demand for semiconductors.

Historically, the semiconductor market has been highly cyclical and has experienced periods of overcapacity, resulting in significantly reduced demand for capital equipment, which may result in lower gross margins due to reduced absorption of manufacturing overhead. In addition, many semiconductor manufacturers have operations and customers in Asia, a region that in past years has experienced serious economic problems including currency devaluations, debt defaults, lack of liquidity and recessions.

The cyclicality of the semiconductor market is demonstrated by the changes in sales to semiconductor capital equipment and device manufacturers in past years. For example, our sales to semiconductor capital equipment manufacturers and semiconductor device manufacturers increased by 19% and 14% in 2014 and 2013, respectively, but decreased by 20% in 2012, compared to 2011. We cannot be certain of the timing or magnitude of future semiconductor industry downturns or recoveries. A decline in the level of orders as a result of any additional downturn or slowdown in the semiconductor capital equipment industry could have a material adverse effect on our business, financial condition and results of operations.

Our quarterly operating results have fluctuated, and are likely to continue to vary significantly, which may result in volatility in the market price of our Common Stock.

A substantial portion of our shipments occurs shortly after an order is received and therefore, we operate with a low level of backlog. As a result, a decrease in demand for our products from one or more customers could occur with limited advance notice and could have a material adverse effect on our results of operations in any particular period. A significant percentage of our expenses are fixed and based in part on expectations of future net revenues. The inability to adjust spending quickly enough to compensate for any shortfall would magnify the adverse impact of a shortfall in net revenues on our results of operations. Factors that could cause fluctuations in our net revenues include:

 

   

the timing of the receipt of orders from major customers;

 

   

shipment delays;

 

   

disruption in sources of supply;

 

   

seasonal variations in capital spending by customers;

 

   

production capacity constraints; and

 

   

specific features requested by customers.

In addition, our quarterly operating results may be adversely affected due to charges incurred in a particular quarter, for example, relating to inventory obsolescence, warranty, bad debt or asset impairments.

As a result of the factors discussed above, it is likely that we may in the future experience quarterly or annual fluctuations and that, in one or more future quarters, our operating results may fall below the expectations of public market analysts or investors. In any such event, the price of our Common Stock could fluctuate or decline significantly.

 

10


Table of Contents

The loss of net revenues to any one of our major customers would likely have a material adverse effect on us.

Our top ten customers accounted for approximately 50%, 46% and 42% of our net revenues for the years 2014, 2013 and 2012, respectively. During the years 2014, 2013 and 2012, one customer, Applied Materials, accounted for approximately 19%, 17% and 14%, of our net revenues, respectively and another customer, Lam Research, accounted for 13%, 12% and 10% of our net revenues, respectively. The loss of a major customer or any reduction in orders by these customers, including reductions due to market or competitive conditions, would likely have a material adverse effect on our business, financial condition and results of operations. None of our significant customers has entered into an agreement with us requiring it to purchase any minimum quantity of our products. The demand for our products from our semiconductor capital equipment customers depends on the cyclicality of our served markets, specifically semiconductor device manufacturer customers.

Attempts to lessen the adverse effect of any loss or reduction of net revenues through the rapid addition of new customers could be difficult because prospective customers typically require lengthy qualification periods prior to placing volume orders with a new supplier. Our future success will continue to depend upon:

 

   

our ability to maintain relationships with existing key customers;

 

   

our ability to attract new customers and satisfy any required qualification periods;

 

   

our ability to introduce new products in a timely manner for existing and new customers; and

 

   

the successes of our customers in creating demand for their capital equipment products that incorporate our products.

As part of our business strategy, we have entered into and may enter into or seek to enter into business combinations and acquisitions that may be difficult and costly to integrate, may be disruptive to our business, may dilute stockholder value or may divert management attention.

We have made acquisitions and, as a part of our business strategy, we may enter into additional business combinations and acquisitions. Acquisitions are typically accompanied by a number of risks, including the difficulty of integrating the operations, technology and personnel of the acquired companies, the potential disruption of our ongoing business and distraction of management, possible internal control weaknesses of the acquired companies, expenses related to the acquisition and potential unknown liabilities associated with acquired businesses. If we are not successful in completing acquisitions that we may pursue in the future, we may be required to re-evaluate our growth strategy, and we may incur substantial expenses and devote significant management time and resources in seeking to complete proposed acquisitions that may not generate benefits for us.

In addition, with future acquisitions, we could use substantial portions of our available cash as all or a portion of the purchase price. We could also issue additional securities as consideration for these acquisitions, which could cause significant stockholder dilution, or obtain debt financing, which could reduce our future cash flow, without achieving the desired accretion to our business. Further, our prior acquisitions and any future acquisitions may not ultimately help us achieve our strategic goals and may pose other risks to us.

As a result of our previous acquisitions, we have several different decentralized operating and accounting systems. We will need to continue to modify our accounting policies, internal controls, procedures and compliance programs to provide consistency across all of our operations. In order to increase efficiency and operating effectiveness and improve corporate visibility into our decentralized operations, we are currently implementing a worldwide Enterprise Resource Planning (“ERP”) system. We expect to continue to implement the ERP system in phases over the next few years. Any future implementations may risk potential disruption of our operations during the conversion periods and the implementations could require significantly more management time and higher implementation costs than currently estimated.

 

11


Table of Contents

An inability to convince semiconductor device manufacturers to specify the use of our products to our customers that are semiconductor capital equipment manufacturers would weaken our competitive position.

The markets for our products are highly competitive. Our competitive success often depends upon factors outside of our control. For example, in some cases, particularly with respect to mass flow controllers, semiconductor device manufacturers may direct semiconductor capital equipment manufacturers to use a specified supplier’s product in their equipment. Accordingly, for such products, our success will depend in part on our ability to have semiconductor device manufacturers specify that our products be used at their semiconductor fabrication facilities. In addition, we may encounter difficulties in changing established relationships of competitors that already have a large installed base of products within such semiconductor fabrication facilities.

If our products are not designed into successive generations of our customers’ products, we will lose significant net revenues during the lifespan of those products.

New products designed by capital equipment manufacturers typically have a lifespan of five to ten years. Our success depends on our products being designed into new generations of equipment. We must develop products that are technologically advanced so that they are positioned to be chosen for use in each successive generation of capital equipment. If customers do not choose our products, our net revenues may be reduced during the lifespan of our customers’ products. In addition, we must make a significant capital investment to develop products for our customers well before our products are introduced and before we can be sure that we will recover our capital investment through sales to the customers in significant volume. We are thus also at risk during the development phase that our products may fail to meet our customers’ technical or cost requirements and may be replaced by a competitive product or alternative technology solution. If that happens, we may be unable to recover our development costs.

The semiconductor industry is subject to rapid demand shifts which are difficult to predict. As a result, our inability to expand our manufacturing capacity in response to these rapid shifts may cause a reduction in our market share.

Our ability to increase sales of certain products depends in part upon our ability to expand our manufacturing capacity for such products in a timely manner. If we are unable to expand our manufacturing capacity on a timely basis or to manage such expansion effectively, our customers could implement our competitors’ products and, as a result, our market share could be reduced. Because the semiconductor industry is subject to rapid demand shifts, which are difficult to foresee, we may not be able to increase capacity quickly enough to respond to a rapid increase in demand. Additionally, capacity expansion could increase our fixed operating expenses and if sales levels do not increase to offset the additional expense levels associated with any such expansion, our business, financial condition and results of operations could be materially adversely affected.

Manufacturing interruptions or delays could affect our ability to meet customer demand and lead to higher costs, while the failure to estimate customer demand accurately could result in excess or obsolete inventory.

Our business depends on its timely supply of equipment, services and related products that meet the rapidly changing technical and volume requirements of our customers, which depends in part on the timely delivery of parts, components and subassemblies (collectively, parts) from suppliers, including contract manufacturers. Cyclical industry conditions and the volatility of demand for manufacturing equipment increase capital, technical, operational and other risks for us and for companies throughout our supply chain. We may also experience significant interruptions of our manufacturing operations, delays in our ability to deliver products or services, increased costs or customer order cancellations as a result of:

 

   

volatility in the availability and cost of materials, including rare earth elements;

 

   

information technology or infrastructure failures; and

 

12


Table of Contents
   

natural disasters or other events beyond our control (such as earthquakes, floods or storms, regional economic downturns, pandemics, social unrest, political instability, terrorism, or acts of war), particularly where we conduct manufacturing.

In addition, if we need to rapidly increase our business and manufacturing capacity to meet increases in demand or expedited shipment schedules, this may exacerbate any interruptions in our manufacturing operations and supply chain and the associated effect on our working capital. Moreover, if actual demand for our products is different than expected, we may purchase more/fewer parts than necessary or incur costs for canceling, postponing or expediting delivery of parts. If we purchase inventory in anticipation of customer demand that does not materialize, or if our customers reduce or delay orders, we may incur excess inventory charges. Any or all of these factors could materially and adversely affect our business, financial condition and results of operations.

A material amount of our assets represents goodwill and intangible assets, and our net income would be reduced if our goodwill or intangible assets become impaired.

As of December 31, 2014, our goodwill and intangible assets, net, represented approximately $238.8 million, or 19.5% of our total assets. Goodwill is generated in our acquisitions when the cost of an acquisition exceeds the fair value of the net tangible and identifiable intangible assets we acquire. Goodwill is subject to an impairment analysis at least annually based on the fair value of the reporting unit. Intangible assets relate primarily to the developed technologies, customer relationships and patents and trademarks acquired by us as part of our acquisitions of other companies and are subject to an impairment analysis whenever events or changes in circumstances exist that indicate that the carrying value of the intangible asset might not be recoverable. We will continue to monitor and evaluate the carrying value of goodwill and intangible assets. If market and economic conditions or business performance deteriorate, the likelihood that we would record an impairment charge would increase, which impairment charge could materially and adversely affect our results of operations.

We operate in a highly competitive industry.

The market for our products is highly competitive. Principal competitive factors include:

 

   

historical customer relationships;

 

   

product quality, performance and price;

 

   

breadth of product line;

 

   

manufacturing capabilities; and

 

   

customer service and support.

Although we believe that we compete favorably with respect to these factors, we may not be able to continue to do so. We encounter substantial competition in most of our product lines. Certain of our competitors may have greater financial and other resources than we have. In some cases, competitors are smaller than we are, but well established in specific product niches. We may encounter difficulties in changing established relationships of competitors with a large installed base of products at such customers’ fabrication facilities. In addition, our competitors can be expected to continue to improve the design and performance of their products. Competitors may develop products that offer price or performance features superior to those of our products. If our competitors develop superior products, we may lose existing customers and market share.

We have significant foreign operations, and outsource certain operations offshore, which pose significant risks.

We have significant international sales, service, engineering and manufacturing operations in Europe, Israel and Asia, and have outsourced a portion of our manufacturing and service to a subcontractor in Mexico. In the future, we may expand the level of manufacturing and certain other operations that we perform offshore in order to take advantage of cost efficiencies available to us in those countries. However, we may not achieve the

 

13


Table of Contents

significant cost savings or other benefits that we would anticipate from moving manufacturing and other operations to a lower cost region. These foreign operations expose us to operational and political risks that may harm our business, including:

 

   

political and economic instability;

 

   

fluctuations in the value of currencies, particularly in Asia and Europe;

 

   

changes in labor conditions and difficulties in staffing and managing foreign operations, including, but not limited to, the formation of labor unions;

 

   

reduced or less certain protection for intellectual property rights;

 

   

greater difficulty in collecting accounts receivable and longer payment cycles;

 

   

burdens and costs of compliance with a variety of foreign laws;

 

   

increases in duties and taxation;

 

   

costs associated with compliance programs for import and export regulations;

 

   

imposition of restrictions on currency conversion or the transfer of funds;

 

   

changes in export duties and limitations on imports or exports;

 

   

expropriation of private enterprises; and

 

   

unexpected changes in foreign regulations.

If any of these risks materialize, our operating results may be adversely affected.

We may have risks associated with export violations in our Shanghai office.

In 2012, an employee from our Shanghai, China subsidiary was arrested as part of a U.S. government investigation into violations of U.S. law, and plead guilty to providing false information to obtain U.S. export licenses for certain of our pressure transducers. In 2013, U.S. authorities also indicted third parties not affiliated with us for export violations relating to the downstream sale of our products. We have cooperated fully with the government’s investigation, and authorities have made it clear that we are not a target of the investigation. In addition, we have conducted our own investigation. Although we took corrective human resources actions and have, since 2012, implemented additional export compliance procedures, we cannot be certain these efforts will be sufficient to avoid similar situations. While we do not expect any of the alleged violations to have a material adverse effect upon our business, we cannot be certain of the outcome of the governmental investigation, which could include the identification of other violations, fines, penalties, restrictions on export activities or other governmental actions.

Unfavorable currency exchange rate fluctuations may lead to lower operating margins or may cause us to raise or reduce prices, which could result in reduced sales.

Currency exchange rate fluctuations could have an adverse effect on our net revenues and results of operations and we could experience losses with respect to our hedging activities. Unfavorable currency fluctuations could require us to increase or decrease prices to foreign customers, which could result in lower net revenues by us to such customers. Alternatively, if we do not adjust the prices for our products in response to unfavorable currency fluctuations, our results of operations could be adversely affected. In addition, most sales made by our foreign subsidiaries are denominated in the currency of the country in which these products are sold and the currency they receive in payment for such sales could be less valuable at the time of receipt as a result of exchange rate fluctuations. We enter into forward foreign exchange contracts to reduce currency exposure arising from intercompany sales of inventory as well as intercompany accounts receivable and intercompany loans. However, we cannot be certain that our efforts will be adequate to protect us against significant currency fluctuations or that such efforts will not expose us to additional exchange rate risks.

 

14


Table of Contents

Changes in tax rates or tax regulation could affect results of operations.

As a global company, we are subject to taxation in the United States and various other countries. Significant judgment is required to determine and estimate worldwide tax liabilities. Our future annual and quarterly effective tax rates could be affected by numerous factors, including changes in the applicable tax laws; composition of pre-tax income in countries with differing tax rates; and/or valuation of our deferred tax assets and liabilities. In addition, we are subject to regular examination by the United States Internal Revenue Service and state, local and foreign tax authorities. We regularly assess the likelihood of favorable or unfavorable outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. Although we believe our tax estimates are reasonable, there can be no assurance that any final determination will not be materially different from the treatment reflected in our historical income tax provisions and accruals, which could materially and adversely affect our financial condition and results of operations.

Key personnel may be difficult to attract and retain.

Our success depends to a large extent upon the efforts and abilities of a number of key employees and officers, particularly those with expertise in the semiconductor manufacturing and similar industrial manufacturing industries. The loss of key employees or officers could have a material adverse effect on our business, financial condition and results of operations. We believe that our future success will depend in part on our ability to attract and retain highly skilled technical, financial, managerial and sales and marketing personnel. We cannot be certain that we will be successful in attracting and retaining such personnel.

A breach of our operational or security systems could negatively affect our business and results of operations.

We rely on various information technology networks and systems, some of which are managed by third parties, to process, transmit and store electronic information, including confidential data, and to carry out and support a variety of business activities, including manufacturing, research and development, supply chain management, sales and accounting. A failure in or a breach of our operational or security systems or infrastructure, or those of our suppliers and other service providers, including as a result of cyber attacks, could disrupt our business, result in the disclosure or misuse of proprietary or confidential information, damage our reputation, cause losses and increase our costs.

Our proprietary technology is important to the continued success of our business. Our failure to protect this proprietary technology may significantly impair our competitive position.

As of December 31, 2014, we owned 376 U.S. patents and 696 foreign patents, that expire at various dates through 2034. As of December 31, 2014, we had 77 pending U.S. patent applications. Although we seek to protect our intellectual property rights through patents, copyrights, trade secrets and other measures, we cannot be certain that:

 

   

we will be able to protect our technology adequately;

 

   

competitors will not be able to develop similar technology independently;

 

   

any of our pending patent applications will be issued;

 

   

domestic and international intellectual property laws will protect our intellectual property rights; or

 

   

third parties will not assert that our products infringe patent, copyright or trade secrets of such parties.

Protection of our intellectual property rights may result in costly litigation.

Litigation may be necessary in order to enforce our patents, copyrights or other intellectual property rights, to protect our trade secrets, to determine the validity and scope of the proprietary rights of others or to defend against claims of infringement. We are, from time to time, involved in lawsuits enforcing or defending our intellectual property rights. Such litigation could result in substantial costs and diversion of resources and could have a material adverse effect on our business, financial condition, results of operations, or cash flows.

 

15


Table of Contents

We may need to expend significant time and expense to protect our intellectual property regardless of the validity or successful outcome of such intellectual property claims. If we lose any litigation, we may be required to seek licenses from others, pay royalties, change, stop manufacturing or stop selling some of our products.

The market price of our Common Stock has fluctuated and may continue to fluctuate for reasons over which we have no control.

The stock market has from time to time experienced, and is likely to continue to experience, extreme price and volume fluctuations. Prices of securities of technology companies have been especially volatile and have often fluctuated for reasons that are unrelated to the operating performance of the companies. Historically, the market price of shares of our Common Stock has fluctuated greatly and could continue to fluctuate due to a variety of factors. In the past, companies that have experienced volatility in the market price of their stock have been the objects of securities class action litigation. If we were the object of securities class action litigation, it could result in substantial costs and a diversion of our management’s attention and resources.

We may not pay dividends on our Common Stock.

Holders of our Common Stock are only entitled to receive such dividends when and if they are declared by our board of directors. Although we have declared cash dividends on our Common Stock since 2011, we are not required to do so and may reduce or eliminate our cash dividend in the future. This could adversely affect the market price of our Common Stock.

Our dependence on sole, limited source suppliers, and international suppliers, could affect our ability to manufacture products and systems.

We rely on sole, limited source suppliers and international suppliers for a few of our components and subassemblies that are critical to the manufacturing of our products. This reliance involves several risks, including the following:

 

   

the potential inability to obtain an adequate supply of required components;

 

   

reduced control over pricing and timing of delivery of components; and

 

   

the potential inability of our suppliers to develop technologically advanced products to support our growth and development of new systems.

We believe we could obtain and qualify alternative sources for most sole, limited source and international supplier parts however, the transition time may be long. Seeking alternative sources for these parts could require us to redesign our systems, resulting in increased costs and likely shipping delays. We may be unable to redesign our systems, which could result in further costs and shipping delays. These increased costs would decrease our profit margins if we could not pass the costs to our customers. Further, shipping delays could damage our relationships with current and potential customers and have a material adverse effect on our business and results of operations.

We are subject to governmental regulations. If we fail to comply with these regulations, our business could be harmed.

We are subject to federal, state, local and foreign regulations, including environmental regulations and regulations relating to the design and operation of our products. We must ensure that the affected products meet a variety of standards, many of which vary across the countries in which our systems are used. For example, the European Union has published directives specifically relating to power supplies. In addition, the European Union has issued directives relating to regulation of recycling and hazardous substances, which may be applicable to our products, or to which some customers may voluntarily elect to adhere to. China has adopted, and certain other Asian countries have indicated, an intention to adopt, similar regulations. We must comply with any applicable regulation adopted in connection with these types of directives in order to ship affected products into countries that adopt these types of regulations. We believe we are in compliance with current applicable

 

16


Table of Contents

regulations, directives and standards and have obtained all necessary permits, approvals and authorizations to conduct our business. However, compliance with future regulations, directives and standards, or customer demands beyond such requirements, could require us to modify or redesign certain systems, make capital expenditures or incur substantial costs. If we do not comply with current or future regulations, directives and standards:

 

   

we could be subject to fines;

 

   

our production could be suspended; or

 

   

we could be prohibited from offering particular systems in specified markets.

Regulations and customer demands related to conflict minerals and hazardous materials may adversely affect us.

The Dodd-Frank Wall Street Reform and Consumer Protection Act imposes disclosure requirements regarding the use in our products of “conflict minerals” mined from the Democratic Republic of Congo and adjoining countries, whether or not the components of our products are manufactured by us or third parties. In addition, several of our customers have requested that we disclose to them our use of numerous hazardous materials in our products. Our supply chain is very complex and the implementation of these requirements could adversely affect the sourcing, availability and pricing of minerals used in the manufacture of our products. In addition, there are additional costs associated with complying with the disclosure requirements and customer requests, such as costs related to our due diligence to determine the source of any “conflict minerals” or the identity of any hazardous materials used in our products. We face the additional challenge that many of our suppliers, both domestic and foreign, are not obligated by the new “conflict minerals” law to investigate their own supply chain. Despite our due diligence efforts, we may be unable to verify the origin of all “conflict minerals” used in our products and/or the use of one or more hazardous materials in our products. As a result, we may be unable to certify that our products are “conflict-free” and/or free of certain hazardous materials. If we are unable to meet our customer requirements, customers may discontinue purchasing from us, which could adversely impact our business, financial condition or operating results.

Some provisions of our restated articles of organization, as amended, our amended and restated by-laws and Massachusetts law could discourage potential acquisition proposals and could delay or prevent a change in control.

Anti-takeover provisions could diminish the opportunities for stockholders to participate in tender offers, including tender offers at a price above the then current market price of the Common Stock. Such provisions may also inhibit increases in the market price of the Common Stock that could result from takeover attempts. For example, while we have no present plans to issue any preferred stock, our board of directors, without further stockholder approval, may issue preferred stock that could have the effect of delaying, deterring or preventing a change in control of us. The issuance of preferred stock could adversely affect the voting power of the holders of our Common Stock, including the loss of voting control to others. In addition, our amended and restated by-laws provide for a classified board of directors consisting of three classes. The classified board could also have the effect of delaying, deterring or preventing a change in control of our Company.

Changes in financial accounting standards may adversely affect our reported results of operations.

A change in accounting standards or practices could have a significant effect on our reported results and may even affect our reporting of transactions completed before the change was effective. New accounting pronouncements and varying interpretations of existing accounting pronouncements have occurred and may occur in the future. Such changes may adversely affect our reported financial results or may impact our related business practice.

 

Item 1B. Unresolved Staff Comments

None.

 

17


Table of Contents
Item 2. Properties

The following table provides information concerning MKS’ principal and certain other owned and leased facilities as of December 31, 2014:

 

Location

   Sq. Ft.     

Activity

  

Reportable

Segment

   Lease
Expires
 

Akishima, Japan

     26,500       Manufacturing, Customer Support and Service    Asia Region Sales & Service      September 11, 2018   

Andover, Massachusetts

     118,000       Manufacturing, Research & Development and Corporate Headquarters    Advanced Manufacturing Capital Equipment and Analytical Solutions Group      (1

Austin, Texas

     20,880       Manufacturing, Sales, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment and Analytical Solutions Group      June 30, 2020   

Berlin, Germany

     20,750       Manufacturing, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      December 13, 2014  (8) 

Boulder, Colorado

     124,000       Manufacturing, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      (2

Carmiel, Israel

     11,800       Manufacturing and Research & Development    Advanced Manufacturing Capital Equipment      December 31, 2017   

Cheshire, United Kingdom

     16,000       Manufacturing, Sales, Customer Support and Service    Analytical Solutions Group and Europe Region Sales & Service      November 6, 2018   

Daejeon, Korea

     21,400       Manufacturing, Sales, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      (4

Filderstadt, Germany

     9,300       Sales and Service    Europe Region Sales & Service      July 31, 2015   

Hellebaek, Denmark

     7,900       Manufacturing and Research & Development    Advanced Manufacturing Capital Equipment      December 1, 2016   

Kyunggi, Korea

     45,600       Sales, Customer Support and Service    Asia Region Sales & Service      (5

Lawrence, Massachusetts

     40,000       Manufacturing    Advanced Manufacturing Capital Equipment and Analytical Solutions Group      (3

Lod, Israel

     7,600       Customer Support and Research & Development    Advanced Manufacturing Capital Equipment      December 31, 2016   

Longmont, Colorado

     60,900       Manufacturing, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      February 29, 2020   

Methuen, Massachusetts

     85,000       Manufacturing, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment and Analytical Solutions Group      (3

 

18


Table of Contents

Location

   Sq. Ft.     

Activity

  

Reportable

Segment

   Lease
Expires
 

Munich, Germany

     19,900       Manufacturing, Sales, Customer Support, Service and Research & Development    Europe Region Sales & Service      (6

Nogales, Mexico

     101,600       Manufacturing and Service    Advanced Manufacturing Capital Equipment      August 31, 2022   

Reggio Emilia, Italy

     10,000       Manufacturing, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      August 31, 2019   

Rochester, New York

     156,000       Manufacturing, Sales, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      (3

San Jose, California

     20,400       Sales, Customer Support and Service    Advanced Manufacturing Capital Equipment and Analytical Solutions Group      January 31, 2018   

Shanghai, China

     18,700       Sales, Customer Support and Service    Asia Region Sales & Service      February 28, 2017   

Shenzhen, China

     242,000       Manufacturing    Advanced Manufacturing Capital Equipment      August 31, 2017   

Shropshire, United Kingdom

     25,000       Manufacturing    Analytical Solutions Group      June 23, 2022   

Singapore

     13,700       Sales, Customer Support and Service    Asia Region Sales & Service      November 30, 2015   

Taiwan

     24,900       Sales, Customer Support and Service    Asia Region Sales & Service      August 31, 2015   

Tokyo, Japan

     6,000       Sales and Customer Support    Asia Region Sales & Service      (9

Umea, Sweden

     7,500       Sales, Customer Support and Research & Development    Analytical Solutions Group      (7

Wilmington, Massachusetts

     118,000       Manufacturing, Sales, Customer Support, Service and Research & Development    Advanced Manufacturing Capital Equipment      (3

 

(1)

MKS owns one facility with 82,000 square feet of space used for manufacturing and research and development and leases 36,000 square feet of space used for its corporate headquarters with a lease that expires on May 31, 2018.

 

(2)

MKS leases two facilities, one of which has 38,000 square feet of space and the lease expires on May 31, 2015. The other has 39,000 square feet of space and the lease expires on May 31, 2020. MKS also owns a third and fourth facility with 27,000 and 20,000 square feet of space, respectively.

 

(3)

This facility is owned by MKS.

 

(4)

MKS owns 18,100 square feet of space and leases 3,300 square feet of space with an expiration date of March 1, 2015.

 

(5)

MKS leases 36,500 square feet of space with an expiration date of May 2, 2020. MKS leases 9,100 square feet of space with an expiration date of January 31, 2017.

 

(6)

MKS owns 14,800 square feet of space and leases 1,600 square feet of space with an expiration date of August 31, 2015 and 3,500 square feet of space with an expiration date of December 31, 2015.

 

(7)

MKS leases two facilities, one of which has 3,300 square feet of space with an expiration date of December 31, 2015, and the other of which has 4,200 square feet of space with an expiration date of August 31, 2016.

 

19


Table of Contents
(8)

We are currently in discussions for an extension on the lease for this existing space. Because this lease has expired we are currently paying month to month until we complete our negotiations.

 

(9)

This lease expired on December 31, 2014. We are in the process of negotiating a new lease in a different location. We will lease this space month to month until negotiations on a new space are complete.

In addition to manufacturing and other operations conducted at the foregoing leased or owned facilities, MKS provides worldwide sales, customer support and services from various other leased facilities throughout the world not listed in the table above. See “Business—Sales, Marketing, Service and Support.”

 

Item 3. Legal Proceedings

We are subject to various legal proceedings and claims, which have arisen in the ordinary course of business. In the opinion of management, the ultimate disposition of these matters will not have a material adverse effect on our results of operations, financial condition or cash flows.

 

Item 4. Mine Safety Disclosures

Not applicable.

 

20


Table of Contents

PART II

 

Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Price Range of Common Stock

Our Common Stock is traded on the NASDAQ Global Select Market under the symbol MKSI. On February 18, 2015, the closing price of our Common Stock, as reported on the NASDAQ Global Select Market, was $35.44 per share. The following table sets forth for the periods indicated the high and low sales prices per share of our Common Stock as reported by the NASDAQ Global Select Market.

 

     2014      2013  
     High      Low      High      Low  

First Quarter

   $ 32.50       $ 28.52       $ 29.45       $ 25.67   

Second Quarter

     31.33         26.80         29.02         24.64   

Third Quarter

     34.89         30.87         28.97         24.71   

Fourth Quarter

     37.83         30.52         31.00         26.39   

On February 18, 2015, we had approximately 117 stockholders of record.

Dividend Policy and Cash Dividends

Holders of our Common Stock are entitled to receive dividends when and if they are declared by our board of directors. During 2014, our board of directors declared one quarterly dividend of $0.16 per share and three quarterly dividends of $0.165 per share, which totaled $34.9 million or $0.655 per share. During 2013, our board of directors declared four quarterly dividends of $0.16 per share, which totaled $34.0 million or $0.64 per share.

Future dividend declarations, if any, as well as the record and payment dates for such dividends, are subject to the final determination of our board of directors. The board of directors intends to declare and pay cash dividends on our Common Stock based on the financial conditions and results of operations of the Company, although it has no obligation to do so.

On February 9, 2015, our board of directors declared a quarterly cash dividend of $0.165 per share to be paid on March 13, 2015 to shareholders of record as of March 2, 2015.

Purchase of Equity Shares

On July 25, 2011, our board of directors approved and on July 27, 2011, we publicly announced, a share repurchase program for the repurchase of up to an aggregate of $200 million of our outstanding Common Stock from time to time in open market purchases, privately negotiated transactions or through other appropriate means (the “Program”). The timing and quantity of any shares repurchased will depend upon a variety of factors, including business conditions, stock market conditions and business development activities, including, but not limited to, merger and acquisition opportunities. These repurchases may be commenced, suspended or discontinued at any time without prior notice. During the twelve months ended December 31, 2014, we repurchased approximately 728,000 shares of our common stock for $20.8 million at an average price of $28.59 per share. No repurchases occurred during the three months ended December 31, 2014.

We have repurchased approximately 1.4 million shares of our common stock for approximately $37.2 million pursuant to the Program since its adoption.

 

21


Table of Contents

Comparative Stock Performance

The following graph compares the cumulative total shareholder return (assuming reinvestment of dividends) from investing $100 on December 31, 2009, and plotted at the last trading day of each of the fiscal years ended December 31, 2010, 2011, 2012, 2013 and 2014, in each of MKS’ Common Stock; an industry group index of semiconductor equipment/material manufacturers (the “Morningstar Semiconductor Equipment & Materials Industry Group”), compiled by Morningstar, Inc.; and the NASDAQ Market Index of companies. The stock price performance on the graph below is not necessarily indicative of future price performance. Our Common Stock is listed on the NASDAQ Global Select Market under the ticker symbol MKSI.

Performance Graph

 

LOGO

 

      2009      2010      2011      2012      2013      2014  

MKS Instruments, Inc.

   $ 100.00       $ 140.80       $ 163.65       $ 155.19       $ 184.36       $ 230.26   

NASDAQ Market Index

   $ 100.00       $ 118.02       $ 117.04       $ 137.47       $ 192.62       $ 221.02   
Morningstar Semiconductor Equipment & Materials Industry Group    $ 100.00       $ 111.46       $ 95.36       $ 109.40       $ 155.00       $ 192.62   

 

22


Table of Contents
Item 6. Selected Financial Data

Selected Consolidated Financial Data

 

     Years Ended December 31,  
     2014      2013      2012      2011      2010  
     (in thousands, except per share data)  

Statement of Operations Data

  

Net revenues

   $ 780,869       $ 669,420       $ 643,508       $   822,517       $ 853,114   

Gross profit

     337,766         266,574         269,479         374,988         378,638   

Income from operations(1)

     135,142         58,387         74,223         184,925         195,507   

Income from continuing operations

     115,778         35,776         48,029         129,731         132,919   

Income from discontinued operations, net of taxes(2)

                                     9,668   

Net income(3)

   $ 115,778       $ 35,776       $ 48,029       $   129,731       $ 142,587   

Basic income per share:

              

Continuing operations

   $ 2.17       $ 0.67       $ 0.91       $ 2.49       $ 2.66   

Net income

   $ 2.17       $ 0.67       $ 0.91       $ 2.49       $ 2.85   

Diluted income per share:

              

Continuing operations

   $ 2.16       $ 0.67       $ 0.90       $ 2.45       $ 2.61   

Net income

   $ 2.16       $ 0.67       $ 0.90       $ 2.45       $ 2.80   

Cash dividends paid per common share

   $ 0.655       $ 0.64       $ 0.62       $ 0.60       $   

Balance Sheet Data

              

Cash and cash equivalents

   $ 305,437       $ 288,902       $ 287,588       $   312,916       $ 162,476   

Short-term investments

     129,594         300,715         327,653         252,603         269,457   

Working capital

     634,464         750,809         788,871         788,470         643,209   

Long-term investments

     157,201         60,405         12,158         7,873           

Total assets(4)

     1,224,044         1,213,018         1,152,562         1,133,935         982,413   

Short-term obligations

                             1,932           

Other liabilities

     38,595         63,073         61,095         47,492         25,688   

Stockholders’ equity

   $ 1,081,822       $ 1,021,523       $ 1,012,156       $   990,012       $ 847,039   

 

(1)

Income from operations for 2014 includes $2.5 million of restructuring charges and $0.5 million of acquisition related costs from our acquisition of Granville-Phillips in May 2014. Income from operations for 2013 includes $2.6 million of costs and other benefits related to the retirement of the Company’s Chief Executive Officer in the fourth quarter of 2013, $1.4 million of restructuring charges and $1.1 million from an insurance reimbursement related to a 2012 litigation settlement. Income from operations for 2012 includes $5.3 million for payment of litigation settlement and $1.3 million of acquisition related costs from our acquisition of Plasmart, Inc. in 2012.

 

(2)

Income from discontinued operations, net of taxes for 2010 includes a $4.4 million gain on the sale of two discontinued product lines.

 

(3)

Net income for 2014 includes charges, net of tax, of $1.5 million of restructuring costs and $0.3 million of acquisition related costs. Net income for 2014 also includes $14.6 million in tax credits for reserve releases related to the settlement of tax audits and the expiration of the statute of limitations.

Net income for 2013 includes charges, net of tax, of $1.6 million of costs and other benefits related to the retirement of the Company’s Chief Executive Officer and $0.9 million of restructuring costs and a benefit, net of tax, of $0.7 million from an insurance reimbursement related to a 2012 litigation settlement. Net income for 2012 includes charges, net of tax, of $3.3 million for a litigation settlement and $0.8 million of acquisition related costs.

 

(4)

For the years ended December 31, 2012 and 2011, total assets and other liabilities have been revised to adjust for a prior period error related to uncertain tax benefits, which had been shown net instead of gross in the balance sheet.

 

23


Table of Contents
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

We are a global provider of instruments, subsystems and process control solutions that measure, control, power, monitor and analyze critical parameters of advanced manufacturing processes to improve process performance and productivity. We also provide services relating to the maintenance and repair of our products, software maintenance, installation services and training.

Our products are derived from our core competencies in pressure measurement and control, materials delivery, gas composition analysis, control and information technology, power and reactive gas generation and vacuum technology. Our products are used in diverse markets, applications and processes. Our primary service markets are manufacturers of capital equipment for semiconductor devices, and for other thin film applications including flat panel displays, solar cells and light emitting diodes (“LEDs”), data storage media and other advanced coatings. We also leverage our technology into other markets with advanced manufacturing applications including medical equipment, pharmaceutical manufacturing, energy generation and environmental monitoring.

We have a diverse base of customers that includes manufacturers of semiconductor capital equipment and semiconductor devices; thin film capital equipment used in the manufacture of flat panel displays; LEDs, solar cells, data storage media and other coating applications; and other industrial, medical, energy generation, environmental monitoring and manufacturing companies, and university, government and industrial research laboratories. During the years 2014, 2013 and 2012, approximately 70%, 68% and 62% of our net revenues, respectively, were to semiconductor capital equipment manufacturers and semiconductor device manufacturers. We expect that sales to semiconductor capital equipment manufacturers and semiconductor device manufacturers will continue to account for a substantial portion of our sales.

We have four reportable segments: Advanced Manufacturing Capital Equipment; Analytical Solutions Group; Europe Region Sales & Service; and Asia Region Sales & Service. The Advanced Manufacturing Capital Equipment segment includes the development, manufacture, sales and servicing of instruments and control products, power and reactive gas products, materials delivery products and vacuum products, all of which are utilized in semiconductor processing and other similar advanced manufacturing processes. Sales in this segment include both external sales and intercompany sales (which are recorded at agreed upon transfer prices). External sales of these products made in Europe or Asia are reported as sales in the Europe Region Sales & Service or Asia Region Sales & Service segments. The Analytical Solutions Group includes, gas composition analysis, information technology products and custom fabrication services. The Europe and Asia Region Sales and Service segments mainly resell and service the Advanced Manufacturing Capital Equipment and Analytical Solutions Group products sold into their respective regions.

We group our products into three product groups, based upon the similarity of the product function, type of product and manufacturing processes. These three groups of products are: Instruments, Control and Vacuum Products; Power and Reactive Gas Products; and Analytical Solutions Group Products.

Net revenues to semiconductor capital equipment manufacture and semiconductor device manufacture customers increased by 19% in 2014 compared to the prior year, after increasing by 14% in 2013 compared to 2012. We had sequential revenue increases in each quarter of 2013 and into the first quarter of 2014. Semiconductor revenues increased from $90 million in the first quarter of 2013 to $150 million in the first quarter of 2014. In the second and third quarters of 2014, there was a pause in spending in the semiconductor market, and we saw a decrease in our semiconductor revenues to $127 million and $126 million, respectively. However, in the fourth quarter of 2014, we saw an increase in semiconductor revenues to $142 million. The semiconductor capital equipment industry is subject to rapid demand shifts, which are difficult to predict, and we are uncertain as to the timing or extent of future demand or any future weakness in the semiconductor capital equipment industry.

 

24


Table of Contents

Our net revenues from other advanced markets, which exclude semiconductor capital equipment and semiconductor device product applications, increased 12% in 2014 compared to the prior year after decreasing 13% in 2013, mainly as a result of decrease in the solar markets. We saw five consecutive quarters of growth in our other advanced markets starting in the quarter ended December 31, 2013. Revenues from customers in other advanced markets are made up of many different markets including general industrial, solar, film, medical, analysis metrology and other markets. The increase is primarily attributed to the general industrial market which increased 38% in 2014 compared to the prior year. Approximately 30% of our net revenues for 2014 were to other advanced markets and we anticipate that these markets will grow and could represent a larger portion of our revenue.

A significant portion of our net revenues is in international markets. During the years 2014, 2013 and 2012, international net revenues accounted for approximately 43%, 46% and 49% of our net revenues, respectively. A significant portion of our international net revenues were sales in Korea and Japan. We expect that international net revenues will continue to represent a significant percentage of our total net revenues.

On May 30, 2014, we acquired Granville-Phillips (“GP”), a division of Brooks Automation, Inc. (“Brooks”), for $87 million. GP is a leading global provider of vacuum measurement and control instruments to the semiconductor, thin film and general industrial markets. The acquisition aligns with our current strategy to grow our semiconductor business, while diversifying into other high growth markets.

On March 12, 2013, we acquired Alter S.r.l. (“Alter”), located in Reggio Emilia, Italy. Alter develops advanced microwave power generators, components and systems for industrial microwave heating, microwave plasma coating and semiconductor applications. The purchase price net of cash acquired and after final debt and working capital post-close adjustments, was $2.4 million.

Critical Accounting Policies and Estimates

Management’s Discussion and Analysis of Financial Condition and Results of Operations discusses our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, we evaluate our estimates and judgments, including those related to revenue recognition, allowance for doubtful accounts, inventory, warranty costs, stock-based compensation expense, intangible assets, goodwill and other long-lived assets, in-process research and development and income taxes. We base our estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following critical accounting policies affect the most significant judgments, assumptions and estimates we use in preparing our consolidated financial statements:

Revenue Recognition and Allowance for Doubtful Accounts.    Revenue from product sales is recorded upon transfer of title and risk of loss to the customer provided that there is evidence of an arrangement, the sales price is fixed or determinable, and collection of the related receivable is reasonably assured. In most transactions, we have no obligations to our customers after the date products are shipped other than pursuant to warranty obligations. We do not frequently enter into arrangements with multiple deliverables; however, for those revenue arrangements with multiple deliverables, we allocate revenue to each element based upon its relative selling price using vendor-specific objective evidence (“VSOE”), or third-party evidence (“TPE”) or based upon the relative selling price using estimated prices if VSOE or TPE does not exist. We then recognize revenue on each deliverable in accordance with our policies for product and service revenue recognition. We defer the fair value

 

25


Table of Contents

of any undelivered elements until the undelivered element is delivered. Fair value is the price charged when the element is sold separately. Shipping and handling fees billed to customers, if any, are recognized as revenue. The related shipping and handling costs are recognized in cost of sales.

We monitor and track the amount of product returns, provide for sales return allowances and reduce revenue at the time of shipment for the estimated amount of such future returns, based on historical experience. While product returns have historically been within our expectations and the provisions established, there is no assurance that we will continue to experience the same return rates that we have in the past. Any significant increase in product return rates could have a material adverse impact on our operating results for the period or periods in which such returns materialize.

While we maintain a credit approval process, significant judgments are made by management in connection with assessing our customers’ ability to pay at the time of shipment. Despite this assessment, from time to time, our customers are unable to meet their payment obligations. We continuously monitor our customers’ credit worthiness, and use our judgment in establishing a provision for estimated credit losses based upon our historical experience and any specific customer collection issues that we have identified. While such credit losses have historically been within our expectations and the provisions established, there is no assurance that we will continue to experience the same credit loss rates that we have in the past. A significant change in the liquidity or financial position of our customers could have a material adverse impact on the collectability of accounts receivable and our future operating results.

Inventory.    We value our inventory at the lower of cost (first-in, first-out method) or market. We regularly review inventory quantities on hand and record a provision to write-down excess and obsolete inventory to its estimated net realizable value, if less than cost, based primarily on our estimated forecast of product demand. Once our inventory value is written-down and a new cost basis has been established, the inventory value is not increased due to demand increases. Demand for our products can fluctuate significantly. A significant increase in the demand for our products could result in a short-term increase in the cost of inventory purchases as a result of supply shortages or a decrease in the cost of inventory purchases as a result of volume discounts, while a significant decrease in demand could result in an increase in the charges for excess inventory quantities on hand. In addition, our industry is subject to technological change, new product development and product technological obsolescence that could result in an increase in the amount of obsolete inventory quantities on hand. Therefore, any significant unanticipated changes in demand or technological developments could have a significant impact on the value of our inventory and our reported operating results. For 2014, 2013 and 2012, our total charges for excess and obsolete inventory totaled $12.1 million, $21.7 million and $15.0 million, respectively. Included in our total charges for excess and obsolete inventory in 2013 is $6.4 million of special charges for obsolete inventory related to a unique product in a solar application as a result of slowing market conditions, which provided uncertainty as to the net realizable value of this inventory.

Warranty Costs.    We provide for the estimated costs to fulfill customer warranty obligations upon the recognition of the related revenue. We provide warranty coverage for our products ranging from 12 to 36 months, with the majority of our products ranging from 12 to 24 months. We estimate the anticipated costs of repairing our products under such warranties based on the historical costs of the repairs and any known specific product issues. The assumptions we use to estimate warranty accruals are re-evaluated periodically in light of actual experience and, when appropriate, the accruals are adjusted. Our determination of the appropriate level of warranty accrual is based upon estimates. Should product failure rates differ from our estimates, actual costs could vary significantly from our expectations.

Stock-Based Compensation Expense.    We record compensation expense for all share-based payment awards to employees and directors based upon the estimated fair market value of the underlying instrument. Accordingly, share-based compensation cost is measured at the grant date, based upon the fair value of the award.

We typically issue restricted stock units (“RSUs”) as stock-based compensation. We also provide employees the opportunity to purchase shares through an Employee Stock Purchase Plan (“ESPP”). For RSUs, the fair value

 

26


Table of Contents

is the stock price on the date of grant. For shares issued under our ESPP, we have estimated the fair value on the date of grant using the Black Scholes pricing model, which is affected by our stock price as well as assumptions regarding a number of complex and subjective variables. These variables include our expected stock price volatility over the term of the awards, expected life, risk free interest rate and expected dividends. Management determined that blended volatility, a combination of historical and implied volatility, is more reflective of market conditions and a better indicator of expected volatility than historical or implied volatility alone. We are also required to estimate forfeitures at the time of grant and revise those estimates in subsequent periods if actual forfeitures differ from those estimates.

Certain RSUs involve stock to be issued upon the achievement of performance conditions (performance shares) under our stock incentive plans. Such performance shares become available subject to time-based vesting conditions if, and to the extent that, financial or operational performance criteria for the applicable period are achieved. Accordingly, the number of performance shares earned will vary based on the level of achievement of financial or operational performance objectives for the applicable period. Until such time that our performance can ultimately be determined, each quarter we estimate the number of performance shares more likely than not to be earned based on an evaluation of the probability of achieving the performance objectives. Such estimates are revised, if necessary, in subsequent periods when the underlying factors change our evaluation of the probability of achieving the performance objectives. Accordingly, share-based compensation expense associated with performance shares may differ significantly from the amount recorded in the current period.

The assumptions used in calculating the fair value of share-based payment awards represents management’s best estimates, but these estimates involve inherent uncertainties and the application of management’s judgment. As a result, if factors change and we use different assumptions, our stock-based compensation expense could be materially different in the future.

Intangible Assets, Goodwill and Other Long-Lived Assets.    As a result of our acquisitions, we have identified intangible assets and generated significant goodwill. Definite-lived intangible assets are valued based on estimates of future cash flows and amortized over their estimated useful life. Goodwill and indefinite-lived intangible assets are subject to annual impairment testing as well as testing upon the occurrence of any event that indicates a potential impairment. Intangible assets and other long-lived assets are also subject to an impairment test if there is an indicator of impairment. The carrying value and ultimate realization of these assets is dependent upon estimates of future earnings and benefits that we expect to generate from their use. If our expectations of future results and cash flows are significantly diminished, intangible assets and goodwill may be impaired and the resulting charge to operations may be material. When we determine that the carrying value of intangibles or other long-lived assets may not be recoverable based upon the existence of one or more indicators of impairment, we use the projected undiscounted cash flow method to determine whether an impairment exists, and then measure the impairment using discounted cash flows. To measure impairment for goodwill, we compare the fair value of our reporting units by measuring discounted cash flows to the book value of the reporting units. Goodwill would be impaired if the resulting implied fair value was less than the recorded book value of the goodwill.

The estimation of useful lives and expected cash flows require us to make significant judgments regarding future periods that are subject to some factors outside of our control. Changes in these estimates can result in significant revisions to the carrying value of these assets and may result in material charges to the results of operations.

We have elected to perform our annual goodwill impairment test as of October 31 of each year, or more often if events or circumstances indicate that there may be impairment. Goodwill is the amount by which the cost of acquired net assets exceeded the fair value of those net assets on the date of acquisition. We allocate goodwill to reporting units at the time of acquisition or when there is a change in the reporting structure and base that allocation on which reporting units will benefit from the acquired assets and liabilities. Reporting units are defined as operating segments or one level below an operating segment, referred to as a component. The estimated fair value of our reporting units was based on discounted cash flow models derived from internal

 

27


Table of Contents

earnings and internal and external market forecasts. Determining fair value requires the exercise of significant judgment, including judgments about appropriate discount rates, perpetual growth rates and the amount and timing of expected future cash flows. Discount rates are based on a weighted average cost of capital (“WACC”), which represents the average rate a business must pay its providers of debt and equity. The WACC used to test goodwill is derived from a group of comparable companies. Assumptions in estimating future cash flows are subject to a high degree of judgment and complexity. We make every effort to forecast these future cash flows as accurately as possible with the information available at the time the forecast is developed.

We have the option of first assessing qualitative factors to determine whether it is necessary to perform the current two-step impairment test or we can perform the two-step impairment test without performing the qualitative assessment. For the reporting units that did not experience any significant adverse changes in their business or reporting structures or any other adverse changes, and the reporting unit’s fair value substantially exceeded its carrying value from when the previous Step 1 analysis was performed, we performed the qualitative “Step 0” assessment. In performing the qualitative Step 0 assessment, we considered certain events and circumstances specific to the reporting unit and to the entity as a whole, such as macroeconomic conditions, industry and market considerations, overall financial performance and cost factors when evaluating whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. For the remaining reporting units that did not meet these criteria we performed the two-step goodwill impairment test. Under the two-step goodwill impairment test, we compared the fair value of each reporting unit to its respective carrying amount, including goodwill. If the carrying value of the reporting unit exceeds the fair value, the second step of the goodwill impairment test must be completed to measure the amount of impairment loss, if any. The second step compares the implied fair value of goodwill with the carrying value of goodwill. The implied fair value is determined by allocating the fair value of the reporting unit to all of the assets and liabilities of that unit, the excess of the fair value over amounts assigned to its assets and liabilities is the implied fair value of goodwill. If the implied fair value of goodwill is less than the carrying value of goodwill, an impairment loss is recognized equal to the difference.

As of October 31, 2014, we performed our annual impairment assessment of goodwill and determined that it is more likely than not that the fair values of the reporting units exceed their carrying amount. We will continue to monitor and evaluate the carrying value of goodwill. If market and economic conditions or business performance deteriorate, this could increase the likelihood of us recording an impairment charge. However, management believes it is not reasonably likely that an impairment will occur at any of its reporting units over the next twelve months.

In-Process Research and Development.    We value tangible and intangible assets acquired through our business acquisitions, including in-process research and development (“IPR&D”), at fair value. We determine IPR&D through established valuation techniques for various projects for the development of new products and technologies and capitalize IPR&D as an intangible asset. If the projects are completed, the intangible asset will be amortized to earnings over the expected life of the completed product. If the R&D projects are abandoned, we will write-off the related intangible asset.

The value of IPR&D is determined using the income approach, which discounts expected future cash flows from projects under development to their net present value. Each project is analyzed and estimates and judgments are made to determine the technological innovations included in the utilization of core technology, the complexity, cost, time to complete development, any alternative future use or current technological feasibility and the stage of completion.

Income Taxes.    We evaluate the realizability of our net deferred tax assets and assess the need for a valuation allowance on a quarterly basis. The future benefit to be derived from our deferred tax assets is dependent upon our ability to generate sufficient future taxable income in each jurisdiction of the right type to realize the assets. We record a valuation allowance to reduce our net deferred tax assets to the amount that may be more likely than not to be realized. To the extent we established a valuation allowance an expense is recorded within the provision for income taxes line in the consolidated statements of operations and comprehensive

 

28


Table of Contents

income. In future periods, if we were to determine that it was more likely than not that we would not be able to realize the recorded amount of our remaining net deferred tax assets, an adjustment to the valuation allowance would be recorded as an increase to income tax expense in the period such determination was made.

Accounting for income taxes requires a two-step approach to recognize and measure uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if, based on the technical merits, it is more likely than not that the position will be sustained upon audit, including resolutions of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. We re-evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.

Results of Operations

The following table sets forth, for the periods indicated, the percentage of total net revenues of certain line items included in our consolidated statements of operations and comprehensive income data:

 

     Years Ended December 31,  
     2014     2013     2012  

Net revenues:

      

Product

     86.3     84.9     83.4

Service

     13.7        15.1        16.6   
  

 

 

   

 

 

   

 

 

 

Total net revenues

     100.0     100.0     100.0

Cost of revenues:

      

Product

     47.9        50.4        48.2   

Service

     8.8        9.8        9.9   
  

 

 

   

 

 

   

 

 

 

Total cost of revenues

     56.7     60.2     58.1
  

 

 

   

 

 

   

 

 

 

Gross profit

     43.3     39.8     41.9

Research and development

     8.1        9.5        9.3   

Selling, general and administrative

     16.9        21.2        19.8   

Litigation

                   0.8   

Insurance reimbursement

            (0.1       

Acquisition costs

     0.1               0.2   

Restructuring

     0.3        0.2        0.1   

Amortization of intangible assets

     0.6        0.3        0.1   
  

 

 

   

 

 

   

 

 

 

Income from operations

     17.3     8.7     11.6

Interest income, net

     0.1        0.1        0.1   
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     17.4     8.8     11.7

Provision for income taxes

     2.6        3.5        4.2   
  

 

 

   

 

 

   

 

 

 

Net income

     14.8     5.3     7.5
  

 

 

   

 

 

   

 

 

 

 

29


Table of Contents

Year Ended December 31, 2014 Compared to 2013 and 2012

Net Revenues

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)    2014      2013      2012       

Product

   $ 673.8       $ 568.3       $ 536.8         18.6     5.9

Service

     107.1         101.1         106.7         5.9        (5.3
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

 

Total net revenues

   $ 780.9       $ 669.4       $ 643.5         16.7     4.0
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

 

Product revenues increased $105.5 million during 2014 compared to 2013. Product revenues related to our semiconductor capital equipment manufacturer and semiconductor device manufacturer customers increased by $83.5 million in 2014 compared to 2013, mainly the result of volume increases in the first quarter of 2014. There was a pause in spending in the semiconductor market in the second and third quarters of 2014 and we saw a decrease in our product semiconductor revenues. However, we then saw an increase in semiconductor product revenues in the fourth quarter of 2014. In the fourth quarter of 2014, our product revenues for other advanced markets, which exclude semiconductor capital equipment and semiconductor device product applications, increased by $22.0 million. The increase in our non-semiconductor markets was primarily caused by volume increases of $15.4 million in our general industrial markets.

Product revenues increased $31.5 million during 2013 compared to 2012. Product revenues related to our semiconductor capital equipment manufacturer and semiconductor device manufacturer customers increased by $59.4 million in 2013 compared to 2012, mainly as a result of volume increases for four consecutive quarters in 2013 in product revenues to the semiconductor markets. Our product revenues for other advanced markets, which exclude semiconductor capital equipment and semiconductor device product applications, decreased by $27.8 million in 2013 compared to 2012, primarily due to volume decreases of $21.0 million in our solar market and $9.9 million in our general industrial market. The solar market has decreased over the past few years due to overcapacity. The industrial market decrease relates to specific projects.

Service revenues consisted mainly of fees for services related to the repair of our products, software license and maintenance, installation services and training. Service revenues increased $6 million during 2014 compared to 2013. This increase was primarily attributed to increases in the semiconductor markets. Service revenues decreased $5.6 million during 2013 compared to 2012. The decrease was primarily attributed to the timing and fulfillment of service orders as we transitioned and merged one of our service locations into an existing service site.

Total international net revenues, including product and service, were $332.4 million for 2014 or 42.6% of net revenues, compared to $305.5 million for 2013, or 45.6% of net revenues, and $316.6 million, or 49.2% of net revenues for 2012. The majority of our foreign revenues are to customers in Korea and Japan.

The following table sets forth our net revenues by reportable segment:

Net Revenues

 

     Years Ended December 31,     % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)    2014     2013     2012      

Advanced Manufacturing Capital Equipment

   $ 639.6      $ 526.0      $ 479.8        21.6     9.6

Analytical Solutions Group

     61.2        56.3        62.8        8.6        (10.3

Europe Region Sales & Service

     55.1        48.5        51.4        13.6        (5.7

Asia Region Sales & Service

     240.8        218.0        229.7        10.4        (5.1

Corporate, Eliminations and Other

     (215.8     (179.4     (180.2     (20.2     0.4   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total net revenues

   $ 780.9      $ 669.4      $ 643.5        16.6     4.0
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

30


Table of Contents

Net revenues for the Advanced Manufacturing Capital Equipment segment increased by 21.6% in 2014 compared to 2013 and 9.6% in 2013 compared to 2012. These increases were mainly due to volume increases of 27.4% and 23.8%, respectively, in revenues from our top two customers, which represented approximately 32% and 29% of our total revenues in 2014 and 2013, respectively.

Net revenues for the Analytical Solutions Group segment increased by 8.6% in 2014 compared to 2013 and decreased 10.3% in 2013 compared to 2012. Net revenues increased for our Europe Region Sales & Service segment by 13.6% in 2014 compared to the prior year and decreased 5.7% in 2013 compared to 2012. For these segments, we sell to customers making up many different markets including general industrial solar, film, medical, analysis metrology and other markets, which are included in our other advanced markets. Revenues from other advanced markets increased by 11.5% in 2014 compared to 2013, which was mainly attributed to volume increases, particularly in the general industrial markets, which increased 37.6%. Revenues from other advanced markets decreased by 12.7% in 2013 compared to 2012, which was mainly due to volume decreases in our solar and general and industrial markets.

Net revenues for the Asia Region Sales & Service segment increased by 10.4% in 2014 compared to 2013 and decreased 5.1% in 2013 compared to 2012. The increase in 2014 compared to 2013 was primarily driven by increases in sales in Korea and Japan, where we mainly sell into the semiconductor markets. The decrease in 2013 compared to 2012 is primarily the result of decreases in sales in the solar markets, which decreased by 73.3%, mainly due to a decrease in orders from a customer in China. In addition, foreign exchange rates, primarily related to the Japanese Yen decreased by approximately 22% in 2013 compared to 2012, which had an unfavorable impact on revenues for the Asia Region Sales & Service segment. Excluding the impact of solar and unfavorable foreign exchange revenues, the Asia Region Sales & Service segment increased by 2.9% in 2013 compared to 2012.

The following is gross profit as a percentage of net revenues by product and service:

Gross Profit

 

     Years Ended December 31,     % Points
Change
in 2014
     % Points
Change
in 2013
 
(As a percentage of net revenues)    2014     2013     2012       

Product

     44.5     40.6     42.2     3.9         (1.6

Service

     35.6        35.3        40.5        0.3         (5.2
  

 

 

   

 

 

   

 

 

   

 

 

    

 

 

 

Total gross profit percentage

     43.3     39.8     41.9     3.5         (2.1
  

 

 

   

 

 

   

 

 

   

 

 

    

 

 

 

Gross profit on product revenues increased by 3.9 percentage points during 2014 compared to 2013. The increase was primarily due to an increase of 2.8 percentage points due to higher revenue volumes and 1.4 percentage points due to lower excess and obsolete inventory charges.

Gross profit on product revenues decreased by 1.6 percentage points during 2013 compared to 2012. The decrease was primarily due to a decrease of 2.7 percentage points due to unfavorable product mix, a decrease of 0.9 percentage points due to higher excess and obsolete inventory charges related to a unique product in a solar application as a result of slowing market conditions, which provided uncertainty as to the net realizable value of this inventory and 0.5 percentage points from unfavorable foreign exchange. These decreases were partially offset by an increase of 1.2 percentage points due to favorable revenue volumes and 1.1 percentage points due to lower overhead expenses.

Cost of service revenues consists primarily of costs for providing services for repair and training which includes salaries, related expenses and other overhead costs. Service gross profit for 2014 remained relatively flat compared to 2013.

 

31


Table of Contents

Service gross profit for 2013 decreased by 5.2 percentage points compared to 2012. The decrease was primarily attributed to a decrease of 2.3 percentage points due to unfavorable product mix, a decrease of 1.1 percentage points due to unfavorable foreign exchange, a decrease of 0.6 percentage points due to higher overhead charges, a decrease of 0.5 percentage points due to unfavorable revenue volumes and a decrease of 0.4 percentage points due to higher warranty charges.

The following is gross profit as a percentage of net revenues by reportable segment:

Gross Profit

 

     Years Ended December 31,     % Points
Change
in 2014
    % Points
Change
in 2013
 
(As a percentage of net revenues)      2014         2013         2012        

Advanced Manufacturing Capital Equipment

     40.8     35.7     35.7     5.1          

Analytical Solutions Group

     50.3        52.3        52.2        (2.0     0.1   

Europe Region Sales & Service

     28.1        28.0        29.5        0.1        (1.5

Asia Region Sales & Service

     16.9        19.7        16.1        (2.8     3.6   

Corporate, Eliminations and Other

     4.6        4.0        (7.4     0.6        11.4   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total net revenues

     43.3     39.8     41.9     3.5        (2.1
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Gross profit for the Advanced Manufacturing Capital Equipment segment increased 5.1 percentage points in 2014 compared to 2013. The increase was primarily due to higher revenue volumes, favorable product mix and lower excess and obsolete inventory charges, partially offset by lower material costs. Gross profit for the Advanced Manufacturing Capital Equipment segment in 2013 compared with 2012 was relatively flat.

Gross profit for the Analytical Solutions Group segment decreased 2.0 percentage points in 2014 compared to 2013. Gross profit for the Analytical Solutions Group segment remained flat in 2013 compared to 2012. The decrease of 2.0 percentage points in 2014 compared to 2013 was primarily attributable to unfavorable product mix and higher overhead charges, partially offset by lower material costs and higher revenue volumes.

Gross profit for the Europe Region Sales & Service segment remained flat in 2014 compared to 2013. Gross profit for the Europe Region Sales & Service segment decreased 1.5 percentage points in 2013 compared to 2012. The decrease of 1.5 percentage points in 2013 compared to 2012 was primarily related to unfavorable product mix.

Gross profit for the Asia Region Sales & Service segment decreased 2.8 percentage points in 2014 compared to 2013 and increased 3.6 percentage in 2013 compared to 2012. The decrease of 2.8 percentage points in 2014 compared to 2013 was primarily due to unfavorable product mix and the unfavorable impact of foreign exchange. The increase of 3.6 percentage points in 2013 compared to 2012 was primarily due to favorable product mix, lower excess and obsolete inventory charges and lower overhead spending, partially offset by unfavorable foreign exchange.

Research and Development

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)    2014      2013      2012       

Research and development expenses

   $ 62.9       $ 63.6       $ 60.1         (1.1 )%      5.7

Research and development expenses decreased $0.7 million during 2014 compared to 2013. The decrease was primarily attributed to a decrease of $0.7 million in consulting and professional fees and a decrease of $0.5 million in project materials, partially offset by an increase of $0.5 million in compensation related costs, including variable compensation and fringe benefits.

 

32


Table of Contents

Research and development expenses increased $3.5 million during 2013 compared to 2012. The increase was primarily attributed to an increase of $3.4 million in compensation related costs, including variable compensation and fringe benefits and an increase of $0.4 million in project materials. These increases were partially offset by a decrease of $0.6 million in consulting costs.

Our research and development is primarily focused on developing and improving our instruments, components, subsystems and process control solutions to improve process performance and productivity.

We have thousands of products and our research and development efforts primarily consist of a large number of projects related to these products, none of which is individually material to us. Current projects typically have durations of 3 to 30 months depending upon whether the product is an enhancement of existing technology or a new product. Our current initiatives include projects to enhance the performance characteristics of older products, to develop new products and to integrate various technologies into subsystems. These projects support in large part, the transition in the semiconductor industry to smaller integrated circuit geometries and in the flat panel display and solar markets to larger substrate sizes, which require more advanced process control technology. Research and development expenses consist primarily of salaries and related expenses for personnel engaged in research and development, fees paid to consultants, material costs for prototypes and other expenses related to the design, development, testing and enhancement of our products.

We believe that the continued investment in research and development and ongoing development of new products are essential to the expansion of our markets, and we expect to continue to make significant investment in research and development activities. We are subject to risks if products are not developed in a timely manner, due to rapidly changing customer requirements and competitive threats from other companies and technologies. Our success primarily depends on our products being designed into new generations of equipment for the semiconductor industry and other advanced technology markets. We develop products that are technologically advanced so that they are positioned to be chosen for use in each successive generation of semiconductor capital equipment. If our products are not chosen to be designed into our customers’ products, our net revenues may be reduced during the lifespan of those products.

Selling, General and Administrative

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Selling, general and administrative expenses

   $ 131.8       $ 142.0       $ 127.2         (7.2 )%      11.7

Selling, general and administrative expenses decreased $10.2 million during 2014 compared to 2013. The decrease was primarily attributed to a $7.1 million decrease in compensation related costs primarily related to headcount reductions, variable compensation and lower fringe benefits, a $2.6 million decrease due to executive retirement costs recorded in the fourth quarter of 2013 as a result of the retirement of our Chief Executive Officer in December 2013 and a $1.2 million decrease related to favorable foreign exchange. These decreases were partially offset by a $1.3 million increase in volume related commission expenses.

Selling, general and administrative expenses increased $14.8 million during 2013 compared to 2012. The increase was primarily attributed to a $10.0 million increase in compensation related costs primarily related to variable compensation and higher fringe benefit costs, a $2.6 million increase related to executive retirement costs recorded in the fourth quarter of 2013 as a result of the retirement of our Chief Executive Officer and a $1.6 million increase in consulting costs.

Litigation

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Litigation

   $       $       $ 5.3             (100.0 )% 

 

33


Table of Contents

Litigation with shareholders of one of our former subsidiaries was settled for $5.3 million during the third quarter of 2012. The complaint alleged certain claims against us including breach of contract, implied covenants and statutory violations. The claims sought unspecified damages and equitable relief. This litigation was long standing and we made the decision to reach a settlement primarily to eliminate future legal expenses related to the suit.

Insurance Reimbursement

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Insurance reimbursement

   $       $ (1.1    $         100.0     (100.0 )% 

In 2013, we recovered $1.1 million from our insurance company relating to the 2012 litigation settlement with certain former shareholders that we settled in 2012.

Acquisition Costs

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Acquisition costs

   $ 0.5       $ 0.2       $ 1.3         191.4     (86.4 )% 

We incurred $0.5 million of legal and filing fees in 2014 related to our June 2014 acquisition of GP. We incurred $0.2 million of legal fees in 2013 related to our 2013 acquisition of Alter. We incurred $1.3 million of investment banking fees, legal fees and due diligence costs in 2012 related to our 2012 acquisition of Plasmart, Inc.

Restructuring

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Restructuring

   $ 2.5       $ 1.4       $ 0.3         80.7     297.1

During 2014, we recorded $2.5 million of restructuring charges primarily for severance related costs related to a reduction in workforce of approximately 131 people throughout our Company. This restructuring was substantially complete at December 31, 2014. During 2013, we recorded $1.4 million of restructuring charges primarily related to the consolidation of certain facilities. The majority of these costs were related to severance expenses and these programs were substantially completed by December 31, 2013. The plans included a small reduction in headcount. During the fourth quarter of 2012, we implemented a workforce reduction plan as a result of a slowdown in our business. We reduced our worldwide workforce by 84 people and recorded a restructuring charge of $0.3 million. This restructuring was substantially complete at December 31, 2012.

Amortization of Intangible Assets

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Amortization of intangible assets

   $ 4.9       $ 2.1       $ 1.0         131.2     106.7

Amortization increased by $2.8 million during 2014 compared to 2013. This increase was primarily attributed to an increase of $3.2 million of amortization related to intangible assets from our May 2014 acquisition of GP. This increase was offset by intangible assets that became fully amortized during the year. Amortization increased by $1.1 million during 2013 compared to 2012. This increase was primarily attributed to an increase in intangible assets from our August 2012 acquisition of Plasmart and our March 2013 acquisition of Alter, partially offset by intangible assets that became fully amortized.

 

34


Table of Contents

Interest Income, Net

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Interest income, net

   $ 1.3       $ 0.9       $ 0.9         36.9    

Net interest income for 2014 increased $0.4 million compared to 2013. The increase was attributable to a change in the mix of our investment portfolio. Net interest income for 2013 remained flat compared to 2012.

Provision for Income Taxes

 

     Years Ended December 31,      % Change
in 2014
    % Change
in 2013
 
(Dollars in millions)      2014          2013          2012         

Provision for income taxes

   $ 20.6       $ 23.5       $ 27.1         (12.4 )%      (13.2 )% 

The provision for income taxes in 2014, 2013 and 2012 are comprised of U.S. federal, state and foreign income taxes.

Our effective tax rate for the years 2014, 2013 and 2012 was 15.1%, 39.7%, and 36.1%, respectively. The effective tax rate in 2014, and related income tax expense was lower than the U.S. statutory tax rate primarily due to the release of income tax reserves related to the effective settlement of various foreign and U.S. tax audits. The effective tax rate for 2014 also benefited from a release of income tax reserves related to the expiration of the statute of limitations for a previously open tax year, a benefit resulting from foreign tax credits recognized on the payment of a dividend from a foreign subsidiary and a benefit from a change in tax election resulting in the recording of a deferred tax asset for previously unavailable foreign net operating losses. Apart from atypical benefits, the 2014 effective tax rate also benefited from foreign earnings taxed at lower rates, the deduction for domestic production activities, and the research credit offset by state income taxes.

The effective tax rate in 2013, and related income tax expense was higher than the U.S. statutory tax rate primarily due to a decision to pay currently, at a substantially reduced rate, taxes on certain accumulated earnings of its Israeli subsidiary relating to calendar year periods 2002-2011 covered under its Israeli tax holiday that expired on December 31, 2011. This additional charge was partially offset by additional U.S. tax incentives realized, and earnings of our international subsidiaries taxed at rates lower than the U.S. statutory rate. Additionally, certain tax incentives realized by us were reinstated under The American Taxpayer Relief Act of 2012 that was signed into law on January 2, 2013.

The effective tax rate in 2012 and related income tax expense is higher than the U.S. statutory tax rate primarily due to the expiration of certain tax incentives under U.S. tax law noted above, and non-deductible acquisition costs that were offset in part by income and profits earned by our international subsidiaries being taxed at rates lower than the U.S. statutory tax rate.

Our effective tax rate has been impacted on a year to year basis by the expiration and extension of certain U.S. tax benefits. If the extension of these benefits was enacted in 2012 rather than retroactively to 2012 in 2013, our 2012 effective tax rate would have been decreased by approximately 3%. These tax benefits were extended again in December 2014 resulting in a tax rate benefit of approximately 1% in 2014. These U.S. tax benefits expired again at December 31, 2014 and will be unavailable in 2015 without a further extension.

At December 31, 2014, the total amount of gross unrecognized tax benefits, which excludes interest and penalties, was approximately $19.6 million. At December 31, 2013, our total amount of gross unrecognized tax benefits, which excludes interest and penalties, was approximately $47.7 million. The net decrease at December 31, 2014 from December 31, 2013 was primarily attributable to current year releases in reserves for existing uncertain tax positions. At December 31, 2014, excluding interest and penalties, there were $11.5

 

35


Table of Contents

million of net unrecognized tax benefits that, if recognized, would affect our annual effective tax rate. We accrued interest and, if applicable, penalties for any uncertain tax positions. Interest and penalties were classified as a component of income tax expense. At December 31, 2014, 2013 and 2012, we had accrued interest on unrecognized tax benefits of approximately $0.6 million, $2.2 million and $1.6 million, respectively.

Over the next 12 months it is reasonably possible that we may recognize approximately $0.1 million of previously net unrecognized tax benefits related to various U.S. federal, state and foreign tax positions primarily as a result of the expiration of various statutes of limitations. We are subject to examination by U.S. federal, state and foreign tax authorities. The United States Internal Revenue Service commenced an examination of our U.S. federal tax filings for tax years 2007 through 2009 during the quarter ended June 30, 2012. This audit was effectively settled in the fourth quarter upon receipt of an audit approval letter from the Joint Committee on Taxation. Due to consents to extend the statute of limitations executed by us during the audit, the U.S. statute of limitations remains open for tax years 2007 through 2009 until December 31, 2015. We were notified of an audit of our U.S. federal tax filings for tax years 2011 through 2013 on February 3, 2015. The U.S. statute of limitations remains open for tax years 2011 through present. The statute of limitations for our tax filings in other jurisdictions varies between fiscal years 2008 through present.

On a quarterly basis, we evaluate both positive and negative evidence that affect the realizability of net deferred tax assets and assess the need for a valuation allowance. The future benefit to be derived from our deferred tax assets is dependent upon our ability to generate sufficient future taxable income in each jurisdiction of the right type to realize the assets. During 2014, we decreased our valuation allowance by $0.3 million primarily related to the effective settlement of a foreign tax audit. In 2013, we decreased our valuation allowance by $0.4 million primarily related to the expiration of U.S. capital loss carry forwards. In 2012, we increased our valuation allowance by $1.0 million primarily related to an increase in state tax credit carry forwards because we determined it is more likely than not that the deferred tax assets related to these attributes will not be realized.

In 2014, we recorded a net benefit to income tax expense of $13.4 million, excluding interest and penalties, due to reserve releases related to the effective settlement of various U.S. and foreign audits along with the expiration of the statute of limitations related to a previously open tax year. In 2013, we recorded a net benefit to income tax expense of $0.1 million, excluding interest and penalties, due to reserve releases primarily related to the expiration of certain statutes of limitations.

Our future effective income tax rate depends on various factors, such as tax legislation and the geographic composition of our pre-tax income. We monitor these factors and timely adjust our effective tax rate accordingly. Additionally, the effective tax rate could be adversely affected by changes in the valuation of deferred tax assets and liabilities. In particular, the carrying value of deferred tax assets, which are predominantly in the United States, is dependent on our ability to generate sufficient future taxable income in the United States. While we believe we have adequately provided for all tax positions, amounts asserted by taxing authorities could materially differ from our accrued positions as a result of uncertain and complex application of tax regulations. Additionally, the recognition and measurement of certain tax benefits include estimates and judgment by management and inherently includes subjectivity. Accordingly, we may record additional provisions due to U.S. federal, state, and foreign tax-related matters in the future as we revise estimates or settle or otherwise resolve the underlying matters.

Liquidity and Capital Resources

Cash, cash equivalents and short-term marketable investments totaled $435.0 million at December 31, 2014, a decrease of $154.6 million compared to $589.6 million at December 31, 2013. This decrease was mainly due to dividend payments to common stockholders, repurchase of common stock, the acquisition of GP, and purchases of property, plant and equipment, partially offset by net income and non-cash net charges. The primary driver in our current and anticipated future cash flows is and will continue to be cash generated from operations, consisting mainly of our net income, excluding non-cash changes and changes in operating assets and liabilities. In periods when our sales are growing, higher sales to customers will result in increased trade receivables, and

 

36


Table of Contents

inventories will generally increase as we build products for future sales. This may result in lower cash generated from operations. Conversely, in periods when our sales are declining, our trade accounts receivable and inventory balances will generally decrease, resulting in increased cash from operations.

Net cash provided by operating activities was $101.9 million for 2014 and resulted mainly from net income of $115.8 million, which included non-cash net charges of $49.9 million, partially offset by an increase in working capital of $63.4 million. The increase in working capital consisted primarily of a decrease in income taxes of $32.7 million, an increase in inventories of $20.9 million, mainly related to an increase in business levels, a decrease in accrued compensation of $13.6 million, mainly related to a payment made to our former CEO who retired in 2013 and a decrease in accounts payable of $5.5 million. These increases are partially offset by a decrease in trade accounts receivable of $6.1 million, mainly due to better collections and a decrease in the number of days of sales outstanding in receivables and an increase in other current and non-current liabilities of $3.5 million.

Net cash provided by operating activities was $76.1 million for 2013 and resulted mainly from net income of $35.8 million, which included non-cash net charges of $50.3 million, partially offset by an increase in working capital of $9.3 million. The increase in working capital consisted primarily of an increase in trade accounts receivable of $36.2 million and an increase in inventories of $29.8 million. These increases are partially offset by an increase in income taxes of $24.4 million, an increase in accounts payable of $23.2 million and an increase in accrued compensation of $13.7 million. The increase in trade accounts receivable and accounts payable was caused by an increase in our business in the fourth quarter of 2013 compared to the fourth quarter of 2012.

Net cash used in investing activities was $24.8 million for 2014 and resulted primarily from $87.0 million used for the acquisition of GP and $13.2 million used for the purchase of production related equipment, partially offset by $73.7 million from net maturities and sales of investments. Net cash used in investing activities was $36.5 million for 2013 and resulted primarily from the net purchases of investments of $21.6 million, $12.4 million used for the purchases of production related equipment and facility expansion and $2.3 million, primarily used for the acquisition of Alter.

Net cash used in financing activities was $52.7 million for 2014 and consisted primarily of $34.9 million in dividend payments made to common stockholders and $20.8 million for the repurchase of Common Stock. Net cash used in financing activities was $37.1 million for 2013 and consisted primarily of $34.0 million in dividend payments made to common stockholders and $2.9 million for the repurchase of Common Stock.

Our Japanese subsidiary has lines of credit and short-term borrowing arrangements with two financial institutions, which generally expire and are renewed at three month intervals. These lines of credit provide for aggregate borrowings as of December 31, 2014 of up to an equivalent of $19.3 million U.S. dollars. There were no borrowings outstanding under these arrangements at December 31, 2014 and December 31, 2013.

We previously had various lines of credit and short and long-term borrowing arrangements as a result of our acquisition of Plasmart in 2012 and Alter in March 2013. All of these lines of credit and borrowing arrangements were paid off and terminated in 2013. There were no outstanding balances at December 31, 2013.

We have provided financial guarantees for certain unsecured borrowings and have standby letters of credit, some of which do not have fixed expiration dates. At December 31, 2014, our maximum exposure as a result of these performance bonds and standby letters of credit was approximately $1.3 million.

On July 25, 2011, our board of directors approved a share repurchase program for the repurchase of up to an aggregate of $200 million of our Common Stock from time to time in open market purchases, privately negotiated transactions or through other appropriate means. The timing and quantity of any shares repurchased will depend upon a variety of factors, including business conditions, stock market conditions and business development activities, including, but not limited to, merger and acquisition opportunities. These repurchases may be commenced, suspended or discontinued at any time without prior notice. During 2014, we repurchased

 

37


Table of Contents

approximately 728,000 shares of our Common Stock for $20.8 million at an average price of $28.59 per share. During 2013, we repurchased approximately 107,000 shares of our Common Stock for $2.9 million at an average price of $26.87 per share.

Holders of our Common Stock are entitled to receive dividends when and if they are declared by our board of directors. For the year ended December 31, 2014, we paid cash dividends of $34.9 million in aggregate, or $0.655 per share. Future dividend declarations, if any, as well as the record and payment dates for such dividends, are subject to the final determination of our board of directors.

On February 9, 2015, our board of directors declared a quarterly cash dividend of $0.165 per share to be paid on March 13, 2015 to shareholders of record as of March 2, 2015.

Our total cash and cash equivalents and short-term marketable investments at December 31, 2014 consisted of $191.5 million held in the U.S. and $243.5 million held by our foreign subsidiaries, substantially all of which would be subject to tax in the U.S. if returned to the U.S. We believe that our current cash and investments position and available borrowing capacity, together with the cash anticipated to be generated from operations, will be sufficient to satisfy our estimated working capital, planned capital expenditure requirements, and any future cash dividends declared by our board of directors or share repurchases through at least the next 12 months and the foreseeable future.

Future payments due under debt, lease and purchase commitment obligations as of December 31, 2014 are as follows:

 

     Payment Due By Period  
            Less than                    After         

Contractual Obligations (In thousands)

   Total      1 Year      1-3 years      3-5 years      5 years      Other (1)  

Operating lease obligations

   $ 22,716       $ 6,197       $ 9,037       $ 5,281       $ 2,201       $   

Purchase obligations(2)

     137,683         111,850         11,404         9,556         4,873           

Other long-term liabilities reflected on the Balance Sheet under U.S. GAAP(3)

     38,595                         6,804         11,588         20,203   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 198,994       $ 118,047       $ 20,441       $ 21,641       $ 18,662       $ 20,203   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

(1)

This balance relates to our reserve for uncertain tax positions.

 

(2)

As of December 31, 2014, we have entered into purchase commitments for certain inventory components and other equipment and services used in our normal operations. The majority of these purchase commitments covered by these arrangements are for periods of less than one year and aggregate to approximately $138 million.

 

(3)

The majority of this balance relates to reserve for uncertain tax positions and accrued compensation for certain executives related to supplemental retirement benefits.

Derivatives

We enter into derivative instruments for risk management purposes only, including derivatives designated as hedging instruments and those utilized as economic hedges. We operate internationally, and in the normal course of business, are exposed to fluctuations in interest rates and foreign exchange rates. These fluctuations can increase the costs of financing, investing and operating the business. We have used derivative instruments, such as forward contracts, to manage certain foreign currency exposure.

By nature, all financial instruments involve market and credit risks. We enter into derivative instruments with major investment grade financial institutions and no collateral is required. We have policies to monitor the credit risk of these counterparties. While there can be no assurance, we do not anticipate any material non-performance by any of these counterparties.

 

38


Table of Contents

We hedge a portion of our forecasted foreign currency denominated intercompany sales of inventory, over a maximum period of eighteen months, using forward foreign exchange contracts accounted for as cash-flow hedges related to Japanese, South Korean, British, Euro and Taiwanese currencies. To the extent these derivatives are effective in offsetting the variability of the hedged cash flows, and otherwise meet the hedge accounting criteria, changes in the derivatives’ fair value are not included in current earnings but are included in accumulated other comprehensive income in stockholders’ equity. These changes in fair value will subsequently be reclassified into earnings, as applicable, when the forecasted transaction occurs. To the extent that a previously designated hedging transaction is no longer an effective hedge, any ineffectiveness measured in the hedging relationship is recorded currently in earnings in the period it occurs. The cash flows resulting from forward exchange contracts are classified in the consolidated statements of cash flows as part of cash flows from operating activities. We do not enter into derivative instruments for trading or speculative purposes.

To the extent that hedge accounting criteria is not met, the foreign currency forward contracts are considered economic hedges and changes in the fair value of these contracts are recorded immediately in earnings in the period in which they occur. These include hedges that are used to reduce exchange rate risks arising from the change in fair value of certain foreign currency denominated assets and liabilities (i.e., payables, receivables) and other economic hedges where the hedge accounting criteria were not met.

We had forward exchange contracts with notional amounts totaling $28.6 million outstanding at December 31, 2014 of which $12.5 million were outstanding to exchange Korean Won to U.S. dollars. We had forward exchange contracts with notional amounts totaling $21.0 million outstanding at December 31, 2013 of which $9.3 million were outstanding to exchange Korean Won to U.S. dollars.

As of December 31, 2014, the unrealized gain that will be reclassified from accumulated other comprehensive income to earnings over the next twelve months is immaterial. The ineffective portions of the derivatives are recorded in selling, general and administrative costs and were immaterial in 2014, 2013 and 2012.

We hedge certain intercompany accounts receivable and intercompany loans with forward exchange contracts. Typically, as these derivatives hedge existing amounts that are denominated in foreign currencies, the derivatives do not qualify for hedge accounting. The foreign exchange loss on these derivatives was $0.1 million in 2014, $0.2 million in 2013 and $1.6 million in 2012.

Realized and unrealized gains and losses on forward exchange contracts that do not qualify for hedge accounting are recognized currently in earnings. The cash flows resulting from forward exchange contracts are classified in our consolidated statements of cash flows as part of cash flows from operating activities. We do not hold or issue derivative financial instruments for trading purposes.

Gains and losses on forward exchange contracts that qualify for hedge accounting are classified in cost of products in 2014 and 2013 and totaled a loss of $0.2 million and a gain of $1.1 million, respectively. In 2012, these gains and losses were classified in selling, general and administrative and totaled a loss of $0.9 million.

Off-Balance Sheet Arrangements

We do not have any financial partnerships with unconsolidated entities, such as entities often referred to as structured finance, special purpose entities or variable interest entities which are often established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. Accordingly, we are not exposed to any financing, liquidity, market or credit risk that could arise if we had such relationships.

Recently Issued Accounting Pronouncements

In May 2014 the Financial Accounting Standards Board issued Accounting Standards Update (“ASU”) No. 2014-09, “Revenue from Contracts with Customers (Topic 606),” which supersedes all existing revenue recognition requirements, including most industry-specific guidance. The new standard requires a company to

 

39


Table of Contents

recognize revenue when it transfers goods and services to customers in an amount that reflects the consideration that the company expects to be entitled to in exchange for those goods or services. The ASU also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and assets recognized from costs incurred to obtain or fulfill a contract. This pronouncement is effective for annual reporting periods beginning after December 15, 2016, including interim periods within that reporting period. The two permitted transition methods under the new standard are the full retrospective method, in which case the standard would be applied to each prior reporting period presented, or the modified retrospective method, in which case the cumulative effect of applying the standard would be recognized at the date of initial application. We have not yet selected a transition method. We are currently evaluating the requirements of ASU No. 2014-09 and have not yet determined its impact on our consolidated financial statements.

In August 2014, the Financial Accounting Standards Board issued ASU No. 2014-15, “Presentation of Financial Statements—Going Concern (Subtopic 205-40): Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern.” Under the new guidance, management will be required to assess an entity’s ability to continue as a going concern, and to provide related footnote disclosures in certain circumstances. The provisions of this ASU are effective for annual periods beginning after December 15, 2016, and for annual and interim periods thereafter. This ASU is not expected to have an impact on our financial statements or disclosures.

 

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Market Risk and Sensitivity Analysis

Our primary exposures to market risks include fluctuations in interest rates on our investment portfolio, as well as fluctuations in foreign currency exchange rates.

Foreign Exchange Rate Risk

We mainly enter into forward exchange contracts to reduce currency exposure arising from intercompany sales of inventory. We also enter into forward exchange contracts to reduce foreign exchange risks arising from the change in fair value of certain foreign currency denominated assets and liabilities.

We had forward exchange contracts with notional amounts totaling $28.6 million outstanding and a net fair value asset of $2.0 million at December 31, 2014. We had forward exchange contracts with notional amounts totaling $21.8 million outstanding and a net fair value asset of $0.3 million at December 31, 2013. The potential fair value loss for a hypothetical 10% adverse change in the currency exchange rate on our forward exchange contracts at December 31, 2014 and 2013 would be immaterial.

Interest Rate Risk

The fair value of our cash and investment portfolio at December 31, 2014 and 2013 approximated its carrying value. Interest rate risk was estimated as the potential decrease in fair value resulting from a hypothetical 10% increase in interest rates for securities contained in the investment portfolio. The resulting hypothetical fair value was not materially different from the year-end carrying values.

From time to time, we have outstanding lines of credit and short-term borrowings with variable interest rates, primarily denominated in Japanese yen. There were no borrowings outstanding under these arrangements at December 31, 2014 or December 31, 2013.

 

40


Table of Contents
Item 8. Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of

MKS Instruments, Inc.:

In our opinion, the consolidated financial statements listed in the index appearing under Item 15(a)(1) present fairly, in all material respects, the financial position of MKS Instruments, Inc. and its subsidiaries at December 31, 2014 and December 31, 2013, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2014 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

As described in Management’s Report on Internal Control over Financial Reporting, management has excluded Granville Phillips from its assessment of internal control over financial reporting as of December 31, 2014 because Granville Phillips was acquired by the Company in a purchase business combination during 2014. We have also excluded Granville Phillips from our audit of internal control over financial reporting. Granville Phillips is a product line whose total assets and total revenues represent less than 2%, respectively, of the related consolidated financial statement amounts as of and for the year ended December 31, 2014.

/s/ PricewaterhouseCoopers LLP

Boston, Massachusetts

February 25, 2015

 

41


Table of Contents

MKS Instruments, Inc.

Consolidated Balance Sheets

 

     December 31,  
             2014                     2013          
     (in thousands, except share data)  
ASSETS   

Current assets:

    

Cash and cash equivalents

   $ 305,437      $ 288,902   

Short-term investments

     129,594        300,715   

Trade accounts receivable, net of allowances of $2,250 and $1,924 at December 31, 2014 and 2013, respectively

     106,362        116,744   

Inventories

     155,169        142,727   

Deferred income taxes

     14,017        13,428   

Other current assets

     27,512        16,715   
  

 

 

   

 

 

 

Total current assets

     738,091        879,231   

Property, plant and equipment, net

     72,776        77,536   

Long-term investments

     157,201        60,405   

Goodwill

     192,381        150,909   

Intangible assets, net

     46,389        13,090   

Other assets

     17,206        31,847   
  

 

 

   

 

 

 

Total assets

   $ 1,224,044      $ 1,213,018   
  

 

 

   

 

 

 
LIABILITIES AND STOCKHOLDERS’ EQUITY   

Current liabilities:

    

Accounts payable

   $ 34,166      $ 40,074   

Accrued compensation

     26,970        43,662   

Income taxes payable

     6,702        10,444   

Other current liabilities

     35,789        34,242   
  

 

 

   

 

 

 

Total current liabilities

     103,627        128,422   

Other liabilities

     38,595        63,073   

Commitments and contingencies (Note 23)

    

Stockholders’ equity:

    

Preferred Stock, $0.01 par value, 2,000,000 shares authorized; none issued and outstanding

              

Common Stock, no par value, 200,000,000 shares authorized; 53,154,666 and 53,363,450 shares issued and outstanding at December 31, 2014 and 2013, respectively

     113        113   

Additional paid-in capital

     734,732        730,571   

Retained earnings

     349,061        278,966   

Accumulated other comprehensive income/(loss)

     (2,084     11,873   
  

 

 

   

 

 

 

Total stockholders’ equity

     1,081,822        1,021,523   
  

 

 

   

 

 

 

Total liabilities and stockholders’ equity

   $ 1,224,044      $ 1,213,018   
  

 

 

   

 

 

 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

42


Table of Contents

MKS Instruments, Inc.

Consolidated Statements of Operations and Comprehensive Income

 

     Years Ended December 31,  
          2014               2013               2012       
     (in thousands, except per share data)  

Net Revenues:

      

Products

   $ 673,819      $ 568,317      $ 536,774   

Services

     107,050        101,103        106,734   
  

 

 

   

 

 

   

 

 

 

Total net revenues

     780,869        669,420        643,508   

Cost of revenues:

      

Cost of products

     374,200        337,464        310,485   

Cost of service

     68,903        65,382        63,544   
  

 

 

   

 

 

   

 

 

 

Total cost of revenues (exclusive of amortization shown separately below)

     443,103        402,846        374,029   

Gross profit

     337,766        266,574        269,479   

Research and development

     62,888        63,570        60,118   

Selling, general and administrative

     131,828        142,014        127,185   

Litigation

                   5,316   

Insurance reimbursement

            (1,071       

Acquisition costs

     499        171        1,258   

Restructuring

     2,464        1,364        343   

Amortization of intangible assets

     4,945        2,139        1,036   
  

 

 

   

 

 

   

 

 

 

Income from operations

     135,142        58,387        74,223   

Interest income

     1,323        999        1,059   

Interest expense

     72        85        146   
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     136,393        59,301        75,136   

Provision for income taxes

     20,615        23,525        27,107   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 115,778      $ 35,776      $ 48,029   
  

 

 

   

 

 

   

 

 

 

Other comprehensive income:

      

Changes in value of financial instruments designated as cash flow hedges, net of tax expense (1)

   $ 1,210      $ 62      $ 150   

Foreign currency translation adjustments, net of tax of $0 for 2014, 2013 and 2012

     (14,707     (3,604     1,664   

Unrealized (loss) gain on investments, net of tax (benefit) expense (2)

     (460     (40     31   
  

 

 

   

 

 

   

 

 

 

Total comprehensive income

   $ 101,821      $ 32,194      $ 49,874   
  

 

 

   

 

 

   

 

 

 

Net income per share:

      

Basic

   $ 2.17      $ 0.67      $ 0.91   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ 2.16      $ 0.67      $ 0.90   
  

 

 

   

 

 

   

 

 

 

Cash dividends paid per common share

   $ 0.655      $ 0.64      $ 0.62   
  

 

 

   

 

 

   

 

 

 

Weighted average common shares outstanding:

      

Basic

     53,232        53,061        52,686   
  

 

 

   

 

 

   

 

 

 

Diluted

     53,515        53,481        53,234   
  

 

 

   

 

 

   

 

 

 

 

(1)

Tax expense was $144, $551 and $88 for the years ended December 31, 2014, 2013 and 2012, respectively.

 

(2)

Tax (benefit) expense was $(55), $(355), and $19 for the years ended December 31, 2014, 2013 and 2012, respectively.

The accompanying notes are an integral part of the consolidated financial statements.

 

43


Table of Contents

MKS Instruments, Inc.

Consolidated Statements of Stockholders’ Equity

 

    Common Stock     Additional
Paid-In
Capital
    Retained
Earnings
    Accumulated
Other
Comprehensive
Income/(Loss)
    Total
Stockholders’
Equity
 
(in thousands)   Shares     Amount          

Balance at December 31, 2011

    52,491,948      $ 113      $ 707,419      $ 268,870      $ 13,610      $ 990,012   

Net issuance under stock-based plans

    691,501          1,564            1,564   

Stock-based compensation

        13,031            13,031   

Tax effect from stock-based plans

        1,862            1,862   

Stock repurchase

    (434,600       (5,871     (5,630       (11,501

Cash dividend

          (32,686       (32,686

Comprehensive income (net of tax):

           

Net income

          48,029          48,029   

Other comprehensive income

            1,845        1,845   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2012

    52,748,849      $ 113      $ 718,005      $ 278,583      $ 15,455      $ 1,012,156   

Net issuance under stock-based plans

    721,601          (464         (464

Stock-based compensation

        13,992            13,992   

Tax effect from stock-based plans

        495            495   

Stock repurchase

    (107,000       (1,457     (1,418       (2,875

Cash dividend

          (33,975       (33,975

Comprehensive income (net of tax):

           

Net income

          35,776          35,776   

Other comprehensive (loss)

            (3,582     (3,582
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2013

    53,363,450      $ 113      $ 730,571      $ 278,966      $ 11,873      $ 1,021,523   

Net issuance under stock-based plans

    519,128          2,492            2,492   

Stock-based compensation

        11,315            11,315   

Tax effect from stock-based plans

        331            331   

Stock repurchase

    (727,912       (9,977     (10,832       (20,809

Cash dividend

          (34,851       (34,851

Comprehensive income (net of tax):

           

Net income

          115,778          115,778   

Other comprehensive (loss)

            (13,957     (13,957
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2014

    53,154,666      $ 113      $ 734,732      $ 349,061      $ (2,084   $ 1,081,822   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

44


Table of Contents

MKS Instruments, Inc.

Consolidated Statements of Cash Flows

 

     Years Ended December 31,  
     2014     2013     2012  
     (in thousands)  

Cash flows from operating activities:

      

Net income

   $ 115,778      $ 35,776      $ 48,029   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Depreciation and amortization

     20,514        17,102        14,442   

Stock-based compensation

     11,315        13,992        13,031   

Provision for excess and obsolete inventory

     12,131        21,671        15,028   

Provision for doubtful accounts

     668        631        888   

Deferred income taxes

     5,264        (3,089     3,819   

Excess tax benefits from stock-based compensation

     (447     (935     (2,105

Other

     139        200        41   

Changes in operating assets and liabilities:

      

Trade accounts receivable

     6,103        (36,153     38,288   

Inventories

     (20,910     (29,797     5,341   

Income taxes

     (32,744     24,441        (3,126

Other current and non-current assets

     (325     1,355        7,689   

Accrued compensation

     (13,563     13,677        2,759   

Other current and non-current liabilities

     3,469        (5,956     1,324   

Accounts payable

     (5,478     23,172        (8,281
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     101,914        76,087        137,167   
  

 

 

   

 

 

   

 

 

 

Cash flows from investing activities:

      

Acquisition of business, net of cash acquired

     (86,950     (2,326     (22,607

Purchases of investments

     (360,813     (550,076     (435,961

Maturities of investments

     249,359        417,566        313,298   

Sales of investments

     185,186        110,928        46,559   

Purchases of property, plant and equipment

     (13,183     (12,410     (17,705

Other

     1,593        (216     (1,451
  

 

 

   

 

 

   

 

 

 

Net cash used in investing activities

     (24,808     (36,534     (117,867
  

 

 

   

 

 

   

 

 

 

Cash flows from financing activities:

      

Proceeds from short-term borrowings

            6        2,896   

Payments on short-term borrowings

            (776     (9,348

Repurchases of common stock

     (20,809     (2,875     (11,501

Net proceeds related to employee stock awards

     2,492        (464     1,564   

Dividend payments

     (34,851     (33,975     (32,686

Excess tax benefit from stock-based compensation

     447        935        2,105   
  

 

 

   

 

 

   

 

 

 

Net cash used in financing activities

     (52,721     (37,149     (46,970
  

 

 

   

 

 

   

 

 

 

Effect of exchange rate changes on cash and cash equivalents

     (7,850     (1,090     2,342   
  

 

 

   

 

 

   

 

 

 

Increase (decrease) in cash and cash equivalents

     16,535        1,314        (25,328

Cash and cash equivalents at beginning of year

     288,902        287,588        312,916   
  

 

 

   

 

 

   

 

 

 

Cash and cash equivalents at end of year

   $ 305,437      $ 288,902      $ 287,588   
  

 

 

   

 

 

   

 

 

 

Supplemental disclosure of cash flow information:

      

Cash paid during the period for:

      

Interest

   $ 44      $ 60      $ 212   

Income taxes

   $ 47,948      $ 11,878      $ 18,335   

The accompanying notes are an integral part of the consolidated financial statements.

 

45


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(in thousands, except share and per share data)

 

1)

Business Description

MKS Instruments, Inc. (“MKS” or the “Company”) was founded in 1961 and is a global provider of instruments, subsystems and process control solutions that measure, control, power, monitor and analyze critical parameters of advanced manufacturing processes to improve process performance and productivity of advanced manufacturing processes. MKS groups its products into three product groups based upon the similarity of the product function, type of product and manufacturing processes. These three groups of products are: Instruments, Control and Vacuum Products; Power and Reactive Gas Products; and Analytical Solutions Group Products. MKS’ products are derived from its core competencies in pressure measurement and control, materials delivery, gas composition analysis, control and information technology, power and reactive gas generation and vacuum technology.

The Company has four reportable segments: Advanced Manufacturing Capital Equipment; Analytical Solutions Group; Europe Region Sales & Service; and Asia Region Sales & Service.

 

2)

Basis of Presentation

The consolidated financial statements include the accounts of MKS Instruments, Inc. and its wholly owned subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates

The consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”). The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments, including those related to revenue recognition and allowance for doubtful accounts, inventory valuation, warranty costs, stock-based compensation, intangible assets, goodwill, other long-lived assets, in process research and development and other acquisition expenses and income taxes. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

Reclassifications

Certain prior year amounts have been reclassified to be consistent with current year classifications.

 

3)

Summary of Significant Accounting Policies

Revenue Recognition and Accounts Receivable Allowances

Revenue from product sales is recorded upon transfer of title and risk of loss to the customer provided that there is evidence of an arrangement, the sales price is fixed or determinable, and collection of the related receivable is reasonably assured. In most transactions, the Company has no obligations to customers after the date products are shipped other than pursuant to warranty obligations. In some instances, the Company provides installation, training, support and services to customers after the product has been shipped. The Company does not frequently enter into arrangements with multiple deliverables; however, for those revenue arrangements with

 

46


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

multiple deliverables, the Company allocates revenue to each element based upon its relative selling price using vendor-specific objective evidence (“VSOE”), or third-party evidence (“TPE”) or based upon the relative selling price using estimated prices if VSOE or TPE does not exist. The Company then recognizes revenue on each deliverable in accordance with its policies for product and service revenue recognition. The Company provides for the estimated costs to fulfill customer warranty obligations upon the recognition of the related revenue. Shipping and handling fees, if any, billed to customers are recognized as revenue. The related shipping and handling costs are recognized in cost of revenues. Accounts receivable allowances include sales returns and bad debt allowances. The Company monitors and tracks the amount of product returns and reduces revenue at the time of shipment for the estimated amount of such future returns, based on historical experience. The Company makes estimates evaluating its allowance for doubtful accounts. The Company continuously monitors collections and payments from its customers and maintains a provision for estimated credit losses based upon its historical experience and any specific customer collection issues that it has identified.

Research and Development

Research and development costs are expensed as incurred and consist mainly of compensation related expenses and project materials. The Company’s research and development efforts include numerous projects, which generally have a duration of 3 to 30 months. Acquired in-process research and development (“IPR&D”) expenses, which are capitalized at fair value as an intangible asset until the related project is completed, are then amortized over the estimated useful life of the product. The Company monitors projects and, if they are abandoned, the Company immediately writes them off.

Advertising Costs

Advertising costs are expensed as incurred and were immaterial in 2014, 2013 and 2012.

Stock-Based Compensation

The accounting for share-based compensation expense requires the measurement and recognition of compensation expense for all share-based payment awards made to employees and directors based on estimated fair values. For restricted stock units (“RSUs”), the fair value is the fair value on the date of grant that normally vest over a three year period. The Company also provides employees the opportunity to purchase shares through an employee stock purchase plan. For shares issued under its employee stock purchase plan, the Company has estimated the fair value on the date of grant using the Black Scholes pricing model, which is affected by the Company’s stock price as well as assumptions regarding a number of complex and subjective variables. These variables include the Company’s expected stock price volatility over the term of the awards, expected life, risk free interest rate and expected dividends. The Company is also required to estimate forfeitures at the time of grant and revise those estimates in subsequent periods if actual forfeitures differ from those estimates.

Management determined that blended volatility, a combination of historical and implied volatility, is more reflective of market conditions and a better indicator of expected volatility than historical or implied volatility alone. The assumptions used in calculating the fair value of share-based payment awards represent management’s best estimates, but these estimates involve inherent uncertainties and the application of management judgment. As a result, if factors change and the Company uses different assumptions, its stock-based compensation expense could be materially different in the future.

 

47


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

Accumulated Other Comprehensive Income

For foreign subsidiaries where the functional currency is the local currency, assets and liabilities are translated into U.S. dollars at the current exchange rate on the balance sheet date. Revenue and expenses are translated at average rates of exchange prevailing during the year. Translation adjustments resulting from this process are recorded to Accumulated Other Comprehensive Income (“OCI”).

Unrealized gains and losses on securities classified as available-for-sale are included in OCI in consolidated stockholders’ equity.

For derivative instruments designated as cash-flow hedges, the effective portion of the derivative’s gain (loss) is initially reported as a component of OCI and is subsequently recognized in earnings when the hedged exposure is recognized in earnings.

Net Income Per Share

Basic net income per share is based on the weighted average number of common shares outstanding, and diluted net income per share is based on the weighted average number of common shares outstanding and all potential dilutive common equivalent shares outstanding. The dilutive effect of options is determined under the treasury stock method using the average market price for the period. Common equivalent shares are included in the per share calculations when the effect of their inclusion would be dilutive.

Cash and Cash Equivalents and Investments

All highly liquid investments with a maturity date of three months or less at the date of purchase are considered to be cash equivalents. The appropriate classification of investments in securities is determined at the time of purchase. Debt securities that the Company does not have the intent and ability to hold to maturity are classified as “available-for-sale” and are carried at fair value. Mutual funds that are bought and held principally for the purpose of selling them in the near term are classified as “trading” and are carried at fair value.

The Company reviews its investment portfolio on a quarterly basis to identify and evaluate individual investments that have indications of possible impairment. The factors considered in determining whether a loss is other-than-temporary include: the length of time and extent to which fair market value has been below the cost basis, the financial condition and near-term prospects of the issuer, credit quality, and the Company’s ability to hold the investment for a period of time sufficient to allow for any anticipated recovery in fair value.

Concentrations of Credit Risk

The Company’s significant concentrations of credit risk consist principally of cash and cash equivalents, investments, forward exchange contracts and trade accounts receivable. The Company maintains cash and cash equivalents with financial institutions including some banks with which it had borrowings. The Company maintains investments primarily in U.S. Treasury and government agency securities and corporate debt securities. The Company enters into forward currency contracts with high credit-quality financial institutions in order to minimize credit risk exposure. The Company’s customers are primarily concentrated in the semiconductor industry, and a limited number of customers account for a significant portion of the Company’s revenues. The Company regularly monitors the creditworthiness of its customers and believes it has adequately provided for potential credit loss exposures. Credit is extended for all customers based primarily on financial condition, and collateral is not required.

 

48


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

The Company had one customer comprising 19%, 17% and 14% of net revenues for 2014, 2013 and 2012, respectively, and another customer comprising 13%, 12% and 10% of net revenues for 2014, 2013, and 2012, respectively. During the years 2014, 2013 and 2012, approximately 70%, 68% and 62% of the Company’s net revenues, respectively, were to semiconductor capital equipment manufacturers and semiconductor device manufacturers. There were two customers comprising 10% or more of the Company’s accounts receivable balance as of December 31, 2014.

Inventories

Inventories are stated at the lower of cost or market, cost being determined using a standard costing system which approximates cost based on a first-in, first-out method. The Company regularly reviews inventory quantities on hand and records a provision to write-down excess and obsolete inventory to its estimated net realizable value, if less than cost, based primarily on its estimated forecast of product demand.

Property, Plant and Equipment

Property, plant and equipment are stated at cost. Expenditures for major renewals and betterments that extend the useful lives of property, plant and equipment are capitalized. Expenditures for maintenance and repairs are charged to expense as incurred. When assets are sold or otherwise disposed of, the cost and related accumulated depreciation are eliminated from the accounts and any resulting gain or loss is recognized in earnings.

Depreciation is provided on the straight-line method over the estimated useful lives of twenty to thirty-one and one-half years for buildings and three to seven years for machinery and equipment, furniture and fixtures and office equipment, which includes enterprise resource planning software. Leasehold improvements are amortized over the shorter of the lease term or the estimated useful life of the leased asset.

Intangible Assets

Intangible assets resulting from the acquisitions of businesses are estimated by management based on the fair value of assets acquired. These include acquired customer lists, technology, patents, trade names, covenants not to compete and IPR&D. Intangible assets are amortized from two to ten years on a straight-line basis which represents the estimated periods of benefit and the expected pattern of consumption.

Goodwill

Goodwill is the amount by which the cost of acquired net assets exceeded the fair value of those net assets on the date of acquisition. The Company allocates goodwill to reporting units at the time of acquisition or when there is a change in the reporting structure and bases that allocation on which reporting units will benefit from the acquired assets and liabilities. Reporting units are defined as operating segments or one level below an operating segment, referred to as a component. The Company assesses goodwill for impairment on an annual basis as of October 31 or more frequently when events and circumstances occur indicating that the recorded goodwill may be impaired.

The estimated fair value of the Company’s reporting units were based on discounted cash flow models derived from internal earnings and internal and external market forecasts. Determining fair value requires the exercise of significant judgment, including judgments about appropriate discount rates, perpetual growth rates and the amount and timing of expected future cash flows. Discount rates are based on a weighted average cost of

 

49


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

capital (“WACC”), which represents the average rate a business must pay its providers of debt and equity. The WACC used to test goodwill is derived from a group of comparable companies. Assumptions in estimating future cash flows are subject to a high degree of judgment and complexity. The Company makes every effort to forecast these future cash flows as accurately as possible with the information available at the time the forecast is developed.

The Company has the option of first assessing qualitative factors to determine whether it is necessary to perform the current two-step impairment test or the Company can perform the two-step impairment test without performing the qualitative assessment. For the reporting units that did not experience any significant adverse changes in their business or reporting structures or any other adverse changes, and the reporting unit’s fair value substantially exceeded its amount from the prior year assessment, the Company performed the qualitative “Step 0” assessment. In performing the qualitative Step 0 assessment, the Company considered certain events and circumstances specific to the reporting unit and to the entity as a whole, such as macroeconomic conditions, industry and market considerations, overall financial performance and cost factors when evaluating whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. For the remaining reporting units that did not meet these criteria, the Company performed the two-step goodwill impairment test. Under the two-step goodwill impairment test, the Company compared the fair value of each reporting unit to its respective carrying amount, including goodwill. If the fair value of the reporting unit exceeds the fair value, the second step of the goodwill impairment test must be completed to measure the amount of impairment loss, if any. The second step compares the implied fair value of goodwill with the carrying value of goodwill. The implied fair value is determined by allocating the fair value of the reporting unit to all of the assets and liabilities of that unit, the excess of the fair value of the amounts assigned to its assets and liabilities it the implied fair value of goodwill. If the implied fair value of goodwill is less than the carrying amount of goodwill, an impairment loss is recognized equal to the difference.

As of October 31, 2014, the Company performed its annual impairment assessment of goodwill and determined that it is more likely than not that the fair values of the reporting units exceed their carrying amount.

Impairment of Long-Lived Assets

The Company evaluates the recoverability of its long-lived assets whenever events and changes in circumstances indicate that the carrying amount of an asset may not be fully recoverable. This periodic review may result in an adjustment of estimated depreciable lives or asset impairment. When indicators of impairment are present, the carrying values of the asset are evaluated in relation to their operating performance and future undiscounted cash flows of the underlying business. If the future undiscounted cash flows are less than their carrying value, impairment exists. The impairment is measured as the difference between the carrying value and the fair value of the underlying asset. Fair values are based on estimates of market prices and assumptions concerning the amount and timing of estimated future cash flows and assumed discount rates, reflecting varying degrees of perceived risk.

Foreign Exchange

The functional currency of the majority of the Company’s foreign subsidiaries is the applicable local currency. For those subsidiaries, assets and liabilities are translated to U.S. dollars at year-end exchange rates. Income and expense accounts are translated at the average exchange rates prevailing during the year. The resulting translation adjustments are included in accumulated other comprehensive income in consolidated stockholders’ equity. Foreign exchange transaction gains and losses, which arise from transaction activity, are reflected in selling, general and administrative expenses in the statement of operations.

 

50


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

Net foreign exchange gains and losses resulting from re-measurement are included in selling general and administrative expense and were a loss of $314, a loss of $1,937 and a gain of $301, respectively, for the years ended December 31, 2014, 2013 and 2012. These amounts do not reflect the corresponding gain (loss) from foreign exchange contracts. See Note 7 “Derivatives” regarding foreign exchange contracts.

Income Taxes

The Company records income taxes using the asset and liability method. Deferred income tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective income tax bases, and also for operating loss and tax credit carry forwards. On a quarterly basis, the Company evaluates both the positive and negative evidence that affects the realizability of net deferred tax assets and assesses the need for a valuation allowance. The future benefit to be derived from its deferred tax assets is dependent upon its ability to generate sufficient future taxable income in each jurisdiction of the right type to realize the assets. The Company records a valuation allowance to reduce its net deferred tax assets to the amount that is more likely than not to be realized. To the extent the Company establishes a valuation allowance an expense will be recorded as a component of the provision for income taxes on the statement of operations. During 2012, the Company increased its valuation allowance by $1,022 primarily related to an increase in state tax credit carry forwards as management determined it is more likely than not that the deferred tax assets related to these attributes will not be realized. As a result, the valuation allowance was $27,497 at December 31, 2012. During 2013, the Company decreased its valuation allowance by $395 primarily related to the expiration of U.S. capital loss carry forwards. As a result, the valuation allowance was $27,102 at December 31, 2013. During 2014, the Company decreased its valuation allowance by $339 primarily related to the effective settlement of a foreign tax audit. As a result, the valuation allowance was $26,763 at December 31, 2014.

Accounting for income taxes requires a two-step approach to recognize and measure uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if, based on the technical merits, it is more likely than not that the position will be sustained upon audit, including resolutions of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. The Company re-evaluates these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.

 

4)

Recently Issued Accounting Pronouncements

In May 2014 the Financial Accounting Standards Board issued Accounting Standards Update (“ASU”) No. 2014-09, “Revenue from Contracts with Customers (Topic 606),” which supersedes all existing revenue recognition requirements, including most industry-specific guidance. The new standard requires a company to recognize revenue when it transfers goods and services to customers in an amount that reflects the consideration that the company expects to be entitled to in exchange for those goods or services. The ASU also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and assets recognized from costs incurred to obtain or fulfill a contract. This pronouncement is effective for annual reporting periods beginning after December 15, 2016, including interim periods within that reporting period. The two permitted transition methods under the new standard are the full retrospective method, in which case the standard would be applied to each prior reporting period presented, or the modified retrospective method, in which case the cumulative effect of applying the

 

51


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

standard would be recognized at the date of initial application. The Company has not yet selected a transition method. The Company is currently evaluating the requirements of ASU No. 2014-09 and has not yet determined its impact on the Company’s consolidated financial statements.

In August 2014, the Financial Accounting Standards Board issued ASU No. 2014-15, “Presentation of Financial Statements—Going Concern (Subtopic 205-40): Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern.” Under the new guidance, management will be required to assess an entity’s ability to continue as a going concern, and to provide related footnote disclosures in certain circumstances. The provisions of this ASU are effective for annual periods beginning after December 15, 2016, and for annual and interim periods thereafter. This ASU is not expected to have an impact on the Company’s financial statements or disclosures.

 

5)

Investments

The fair value of short-term investments with maturities or estimated lives of less than one year consists of the following:

 

     Years Ended December 31,  
           2014                  2013        

Available-for-sale investments:

     

Time deposits and certificates of deposit

   $ 20,900       $ 64,989   

Bankers acceptance drafts

     82         491   

Commercial paper

             53,434   

Corporate obligations

     24,020         18,351   

Municipal bonds

     2,099           

U.S. agency obligations

     82,493         162,450   
  

 

 

    

 

 

 
     129,594         299,715   

Trading securities:

     

Mutual funds (1)

             1,000   
  

 

 

    

 

 

 
   $ 129,594       $ 300,715   
  

 

 

    

 

 

 

 

(1)

The mutual funds are associated with the Company’s supplemental defined contribution retirement obligations.

The fair value of long-term available-for-sale investments with maturities or estimated lives of more than one year consists of the following:

 

     Years Ended December 31,  
           2014                  2013        

Time deposits and certificates of deposit

   $ 48       $ 54   

Asset-backed securities

     75,674           

Corporate obligations

     64,669           

Municipal bonds

     1,254           

U.S. agency obligations

     15,556         60,351   
  

 

 

    

 

 

 
   $ 157,201       $ 60,405   
  

 

 

    

 

 

 

 

52


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

The following table shows the gross unrealized gains and (losses) aggregated by investment category for short-term and long-term available-for-sale investments:

 

     Cost      Gross
Unrealized
Gains
     Gross
Unrealized
(Losses)
     Estimated
Fair Value
 

As of December 31, 2014:

           

Short-term investments:

           

Available-for-sale investments:

           

Time deposits and certificates of deposit

   $ 20,901       $       $ (1    $ 20,900   

Bankers acceptance drafts

     82                         82   

Corporate obligations

     24,029         2         (11      24,020   

Municipal bonds

     2,100                 (1      2,099   

U.S. agency obligations

     82,488         14         (9      82,493   
  

 

 

    

 

 

    

 

 

    

 

 

 
   $ 129,600       $ 16       $ (22    $ 129,594   
  

 

 

    

 

 

    

 

 

    

 

 

 

Long-term investments:

           

Time deposits

   $ 48       $       $       $ 48   

Asset-backed securities

     75,778         5         (109      75,674   

Corporate obligations

     64,842         1         (174      64,669   

Municipal bonds

     1,258                 (4      1,254   

U.S. agency obligations

     15,563         2         (9      15,556   
  

 

 

    

 

 

    

 

 

    

 

 

 
   $ 157,489       $ 8       $ (296    $ 157,201   
  

 

 

    

 

 

    

 

 

    

 

 

 

 

     Cost      Gross
Unrealized
Gains
     Gross
Unrealized
(Losses)
     Estimated
Fair Value
 

As of December 31, 2013:

           

Short-term investments:

           

Available-for-sale investments:

           

Time deposits and certificates of deposit

   $ 64,983       $ 10       $ (4    $ 64,989   

Bankers acceptance drafts

     491                         491   

Commercial paper

     53,429         5                 53,434   

Corporate obligations

     18,360                 (9      18,351   

U.S. agency obligations

     162,430         22         (2      162,450   
  

 

 

    

 

 

    

 

 

    

 

 

 
   $ 299,693       $ 37       $ (15    $ 299,715   
  

 

 

    

 

 

    

 

 

    

 

 

 

Long-term investments:

           

Time deposits and certificates of deposit

   $ 54       $       $       $ 54   

U.S. agency obligations

     60,374         9         (32      60,351   
  

 

 

    

 

 

    

 

 

    

 

 

 
   $ 60,428       $ 9       $ (32    $ 60,405   
  

 

 

    

 

 

    

 

 

    

 

 

 

Interest income is accrued as earned. Dividend income is recognized as income on the date the stock trades “ex-dividend.” The cost of marketable securities sold is determined by the specific identification method and realized gains or losses are reflected in income and was not material in 2014, 2013 and 2012.

 

53


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

6)

Fair Value Measurements

In accordance with the provisions of fair value accounting, a fair value measurement assumes that the transaction to sell an asset or transfer a liability occurs in the principal market for the asset or liability or, in the absence of a principal market, the most advantageous market for the asset or liability and defines fair value based upon an exit price model.

The fair value measurement guidance establishes a fair value hierarchy which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The guidance describes three levels of inputs that may be used to measure fair value:

 

Level 1

  

Quoted prices in active markets for identical assets or liabilities as of the reporting date. Active markets are those in which transactions for the asset or liability occur in sufficient frequency and volume to provide pricing information on an ongoing basis.

Level 2

  

Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities. Level 2 assets and liabilities include debt securities with quoted prices that are traded less frequently than exchange-traded instruments or securities or derivative contracts that are valued using a pricing model with inputs that are observable in the market or can be derived principally from or corroborated by observable market data.

Level 3

  

Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities. Level 3 assets and liabilities include financial instruments whose value is determined using pricing models, discounted cash flow methodologies, or similar techniques, as well as instruments for which the determination of fair value requires significant management judgment or estimation.

In certain cases, the inputs used to measure fair value may fall into different levels of the fair value hierarchy. In such cases, the Company categorizes such assets and liabilities based on the lowest level input that is significant to the fair value measurement in its entirety. The Company’s assessment of the significance of a particular input to the fair value measurement in its entirety requires judgment and considers factors specific to the asset.

 

54


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

Assets and liabilities of the Company measured at fair value on a recurring basis as of December 31, 2014, are summarized as follows:

 

          Fair Value Measurements at Reporting Date Using  

Description

  December 31,
2014
    Quoted Prices in
Active Markets for
Identical Assets

(Level 1)
    Significant Other
Observable
Inputs

(Level 2)
    Significant
Unobservable
Inputs

(Level 3)
 

Assets:

       

Cash equivalents:

       

Money market funds

  $ 129,092      $ 129,092      $      $   

Bankers acceptance drafts

    131               131          

Corporate obligations

    700               700          

Available-for-sale securities:

       

Time deposits and certificates of deposit

    20,948               20,948          

Asset-backed securities

    75,674               75,674          

Bankers acceptance drafts

    82               82          

Corporate obligations

    88,689               88,689          

Municipal bonds

    3,353               3,353          

U.S. agency obligations

    98,049               98,049          

Derivatives — currency forward contracts

    2,110               2,110          
 

 

 

   

 

 

   

 

 

   

 

 

 

Total assets

  $ 418,828      $ 129,092      $ 289,736      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Liabilities:

       

Derivatives — currency forward contracts

  $      $      $      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Reported as follows:

       

Assets:

       

Cash and cash equivalents (1)

  $ 129,923      $ 129,092      $ 831      $   

Short-term investments

    129,594               129,594          

Other current assets

    2,110               2,110          
 

 

 

   

 

 

   

 

 

   

 

 

 
  $ 261,627      $ 129,092      $ 132,535      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Long-term investments

  $ 157,201      $      $ 157,201      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Liabilities:

       

Other current liabilities

  $      $      $      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

 

(1)

The cash and cash equivalent amounts presented in the table above do not include cash of $167,517 and non-negotiable time deposits of $7,997 as of December 31, 2014.

 

55


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

Assets and liabilities of the Company measured at fair value on a recurring basis as of December 31, 2013, are summarized as follows:

 

          Fair Value Measurements at Reporting Date Using  

Description

  December 31,
2013
    Quoted Prices in
Active Markets for
Identical Assets

(Level 1)
    Significant Other
Observable
Inputs

(Level 2)
    Significant
Unobservable
Inputs

(Level 3)
 

Assets:

       

Cash equivalents:

       

Money market funds

  $ 38,166      $ 38,166      $      $   

Time deposits and certificates of deposit

    7,050               7,050          

Bankers acceptance drafts

    32               32          

Commercial paper

    3,350               3,350          

Trading securities:

       

Mutual funds

    1,000        1,000                 

Available-for-sale securities:

       

Time deposits and certificates of deposit

    65,043               65,043          

Bankers acceptance drafts

    491               491          

Commercial paper

    53,434               53,434          

Corporate obligations

    18,351               18,351          

U.S. agency obligations

    222,801               222,801          

Derivatives — currency forward contracts

    920               920          
 

 

 

   

 

 

   

 

 

   

 

 

 

Total assets

  $ 410,638      $ 39,166      $ 371,472      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Liabilities:

       

Derivatives — currency forward contracts

  $ 656      $      $ 656      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Reported as follows:

       

Assets:

       

Cash and cash equivalents (1)

  $ 48,598      $ 38,166      $ 10,432      $   

Short-term investments

    300,715        1,000        299,715          

Other current assets

    920               920          
 

 

 

   

 

 

   

 

 

   

 

 

 
  $ 350,233      $ 39,166      $ 311,067      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Long-term investments

  $ 60,405      $      $ 60,405      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

Liabilities:

       

Other current liabilities

  $ 656      $      $ 656      $   
 

 

 

   

 

 

   

 

 

   

 

 

 

 

(1)

The cash and cash equivalent amounts presented in the table above do not include cash of $234,675 and non-negotiable time deposits of $5,629 as of December 31, 2013.

Money Market Funds

Money market funds are cash and cash equivalents, and are classified within Level 1 of the fair value hierarchy.

Trading Securities

As of December 31, 2013, trading securities consisted of certain U.S. and international equity mutual funds and government agency fixed income mutual funds.

 

56


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

Available-For-Sale Investments

As of December 31, 2014, available-for-sale investments consisted of time deposits and drafts denominated in the Euro currency, certificates of deposit, asset-backed securities (which include auto loans, credit card receivables and equipment trust receivables), corporate obligations, U.S. treasury obligations and U.S. agency obligations. As of December 31, 2013, available-for-sale investments consisted of time deposits and drafts denominated in the Euro currency, commercial paper, certificates of deposit, corporate obligations, and U.S. agency obligations.

The Company measures its debt and equity investments at fair value. The Company’s available-for-sale investments are classified within Level 1 and Level 2 of the fair value hierarchy.

Derivatives

As a result of the Company’s global operating activities, the Company is exposed to market risks from changes in foreign currency exchange rates, which may adversely affect its operating results and financial position. When deemed appropriate, the Company minimizes its risks from foreign currency exchange rate fluctuations through the use of derivative financial instruments. The principal market in which the Company executes its foreign currency contracts is the institutional market in an over-the-counter environment with a relatively high level of price transparency. The market participants usually are large commercial banks. The forward foreign currency exchange contracts are valued using broker quotations, or market transactions and are classified within Level 2 of the fair value hierarchy.

 

7)

Derivatives

The Company enters into derivative instruments for risk management purposes only, including derivatives designated as hedging instruments and those utilized as economic hedges. The Company operates internationally and, in the normal course of business, is exposed to fluctuations in interest rates and foreign exchange rates. These fluctuations can increase the costs of financing, investing and operating the business. The Company has used derivative instruments, such as forward contracts, to manage certain foreign currency exposure.

By nature, all financial instruments involve market and credit risks. The Company enters into derivative instruments with major investment grade financial institutions and no collateral is required. The Company has policies to monitor the credit risk of these counterparties. While there can be no assurance, the Company does not anticipate any material non-performance by any of these counterparties.

The Company hedges a portion of its forecasted foreign currency denominated intercompany sales of inventory, over a maximum period of eighteen months, using forward foreign exchange contracts accounted for as cash-flow hedges related to Japanese, South Korean, British, Euro and Taiwanese currencies. To the extent these derivatives are effective in off-setting the variability of the hedged cash flows, and otherwise meet the hedge accounting criteria, changes in the derivatives’ fair value are not included in current earnings but are included in OCI in stockholders’ equity. These changes in fair value will subsequently be reclassified into earnings, as applicable, when the forecasted transaction occurs. To the extent that a previously designated hedging transaction is no longer an effective hedge, any ineffectiveness measured in the hedging relationship is recorded currently in earnings in the period it occurs. The cash flows resulting from forward exchange contracts are classified in the consolidated statements of cash flows as part of cash flows from operating activities. The Company does not enter into derivative instruments for trading or speculative purposes.

 

57


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

To the extent the hedge accounting criteria is not met, the related foreign currency forward contracts are considered as economic hedges and changes in the fair value of these contracts are recorded immediately in earnings in the period in which they occur. These include hedges that are used to reduce exchange rate risks arising from the change in fair value of certain foreign currency denominated assets and liabilities (i.e., payables, receivables) and other economic hedges where the hedge accounting criteria were not met.

As of December 31, 2014 and 2013, the Company had outstanding forward foreign exchange contracts with gross notional values of $28,650 and $21,018, respectively. The following tables provide a summary of the primary net hedging positions and corresponding fair values held as of December 31, 2014 and 2013:

 

     December 31, 2014  

Currency Hedged (Buy/Sell)

   Gross Notional
Value
     Fair Value (1)  

U.S. Dollar/Japanese Yen

   $ 8,035       $ 1,107   

U.S. Dollar/South Korean Won

     12,512         372   

U.S. Dollar/Euro

     2,060         185   

U.S. Dollar/U.K. Pound Sterling

     1,308         70   

U.S. Dollar/Taiwan Dollar

     4,735         232   
  

 

 

    

 

 

 

Total

   $ 28,650       $ 1,966   
  

 

 

    

 

 

 

 

     December 31, 2013  

Currency Hedged (Buy/Sell)

   Gross Notional
Value
     Fair Value (1)  

U.S. Dollar/Japanese Yen

   $ 7,191       $ 920   

U.S. Dollar/South Korean Won

     9,254         (521

U.S. Dollar/Euro

     2,806         (85

U.S. Dollar/U.K. Pound Sterling

     1,767         (50
  

 

 

    

 

 

 

Total

   $ 21,018       $ 264   
  

 

 

    

 

 

 

The following table provides a summary of the fair value amounts of the Company’s derivative instruments:

 

      Years Ended December 31,  

Derivatives Designated as Hedging Instruments

       2014              2013      

Derivative assets:

     

Forward exchange contracts

   $ 1,966       $ 920   

Derivative liabilities:

     

Forward exchange contracts

             (656
  

 

 

    

 

 

 

Total net derivative asset designated as hedging instruments (1)

   $ 1,966       $ 264   
  

 

 

    

 

 

 

 

(1)

The derivative asset of $1,966 is classified in other current assets in the consolidated balance sheet as of December 31, 2014. The derivative asset of $920 and derivative liability of $(656) are classified in other current assets and other current liabilities, respectively, in the consolidated balance sheet as of December 31, 2013.

The net amount of existing gains as of December 31, 2014 that is expected to be reclassified from OCI into earnings within the next twelve months is immaterial.

 

58


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

The following table provides a summary of the (losses) gains on derivatives designated as hedging instruments:

 

      Years Ended December 31,  

Derivatives Designated as Cash Flow Hedging Relationships

   2014      2013      2012  

Forward exchange contracts:

        

Net (loss) gain recognized in OCI (1)

   $ (984    $ (48    $ 936   

Net (loss) gain reclassified from OCI into income (2)

   $ (160    $ 1,086       $ (930

 

(1)

Net change in the fair value of the effective portion classified in OCI.

 

(2)

Effective portion classified as cost of products in 2014 and 2013 and selling, general and administrative in 2012.

The following table provides a summary of gains (losses) on derivatives not designated as hedging instruments:

 

      Years Ended December 31,  

Derivatives Not Designated as Hedging Instruments

   2014      2013      2012  

Forward exchange contracts:

        

Net gain (loss) recognized in income (1)

   $ 101       $ (215    $ (1,606

 

(1)

The Company enters into foreign exchange contracts to hedge against changes in the balance sheet, including accounts receivable and intercompany loans, for certain subsidiaries. These derivatives are not designated as hedging instruments.

 

8)

Inventories

Inventories consist of the following:

 

     Years Ended December 31,  
           2014                  2013        

Raw material

   $ 81,121       $ 75,687   

Work-in-process

     26,604         24,304   

Finished goods

     47,444         42,736   
  

 

 

    

 

 

 
   $ 155,169       $ 142,727   
  

 

 

    

 

 

 

Inventory related excess and obsolete charges of $12,131, $21,671 and $15,028 were recorded in cost of products in the years ended December 31, 2014, 2013 and 2012, respectively. Included in excess and obsolete charges for 2013 was $6,423 of special charges for obsolete inventory related to a unique product in a solar application as a result of slowing market conditions, which provided uncertainty as to the net realizable value of this inventory.

 

59


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

9)

Property, Plant and Equipment

Property, plant and equipment consist of the following:

 

     Years Ended December 31,  
           2014                  2013        

Land

   $ 8,650       $ 9,225   

Buildings

     66,885         68,569   

Machinery and equipment

     122,720         116,475   

Furniture and fixtures, office equipment and software

     59,972         59,068   

Leasehold improvements

     21,353         20,590   

Construction in progress

     3,647         3,702   
  

 

 

    

 

 

 
     283,227         277,629   

Less: accumulated depreciation

     210,451         200,093   
  

 

 

    

 

 

 
   $ 72,776       $ 77,536   
  

 

 

    

 

 

 

Depreciation of property, plant and equipment totaled $15,569, $14,964 and $13,406 for the years ended 2014, 2013 and 2012, respectively.

 

10)

Acquisitions

Granville-Phillips

On May 30, 2014, the Company acquired Granville-Phillips (“GP”), a division of Brooks Automation, Inc. (“Brooks”), for $87,000, which included $86,950 in cash and $50 in contingent consideration. MKS will pay contingent consideration if it does not cease use of certain of Brooks’ administrative services by a pre-defined date in accordance with a transition services agreement. GP is a leading global provider of vacuum measurement and control instruments to the semiconductor, thin film and general industrial markets. The Company believes that the amount of goodwill relative to identifiable intangible assets relates to several factors, including: a well-regarded leader in indirect vacuum gauges, a premium brand, an excellent reputation for quality, reliability and performance and an assembled workforce. The acquisition aligns with the Company’s current strategy to grow its semiconductor business, while diversifying into other high growth advanced markets.

The following table summarizes the estimated fair value of the assets acquired and liabilities assumed at the date of acquisition:

 

Inventory

   $ 6,223   

Property and equipment

     299   

Other assets

     191   

Intangible assets

     38,850   

Goodwill

     41,612   

Warranty liability

     (175
  

 

 

 

Total purchase price

   $ 87,000   
  

 

 

 

 

60


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

The entire purchase price is expected to be deductible for tax purposes. The following table reflects the allocation of the acquired intangible assets and related estimates of useful lives. These acquired intangibles will be amortized on a straight-line basis.

 

Customer relationships

   $ 21,250       7 years

Trademark and trade names

     1,900       12 years

Developed technology

     15,700       9-12 years
  

 

 

    
   $ 38,850      
  

 

 

    

This transaction resulted in an amount of purchase price that exceeded the estimated fair value of tangible and intangible assets, which was allocated to goodwill. The Company believes that the amount of goodwill relative to identifiable intangible assets relates to several factors including: (1) potential buyer-specific synergies related to market opportunities for a combined product offering; (2) potential to leverage the Company’s sales force and intellectual property to attract new customers and revenue and (3) potential to strengthen the Company’s position in the vacuum gauge market.

The results of this acquisition were included in the Company’s consolidated operations beginning on May 30, 2014. The pro forma consolidated statements reflecting the operating results of GP, had it been acquired as of January 1, 2013, would not differ materially from the operating results of the Company as reported for the year ended December 31, 2014. GP is included in the Company’s Instruments, Control and Vacuum Products group and the Advanced Manufacturing Capital Equipment reportable segment.

Alter S.r.l

On March 12, 2013, the Company acquired Alter S.r.l. (“Alter”), located in Reggio Emilia, Italy. The aggregate purchase price, net of cash acquired and after final debt and working capital adjustments was $2,426. Total cash paid as of June 30, 2013, net of cash acquired of $21 was $2,058. During June 2013, one of two holdback provisions was met and the Company released $123. The Company will pay the remaining $368 subject to a final holdback provision being met. Alter develops advanced microwave power generators, components and systems for industrial microwave heating, microwave plasma coating and semiconductor applications. This acquisition strengthens the Company’s existing microwave plasma expertise and product portfolio, and extends its opportunity into high growth, non-plasma microwave applications for industrial processes, food and beverage manufacturing and other markets.

 

61


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

The following table summarizes the estimated fair value of the assets acquired and liabilities assumed at the date of the acquisition:

 

Current assets

   $ 1,053   

Property and equipment

     211   

Intangible assets

     2,806   

Goodwill

     381   

Other assets

     67   
  

 

 

 

Total assets acquired

   $ 4,518   

Debt (Note 15)

     770   

Deferred taxes and other liabilities

     1,301   
  

 

 

 

Total liabilities assumed

   $ 2,071   

Total purchase price

   $ 2,447   

Cash acquired

     (21
  

 

 

 

Total purchase price, net of cash acquired

   $ 2,426   
  

 

 

 

The intangible assets associated with the acquisition are not deductible for tax purposes. The following table reflects the allocation of the acquired intangible assets and related estimates of useful lives. These acquired intangibles will be amortized on a straight-line basis.

 

Current developed technology

   $ 2,208       9 year useful life

Trademarks and trade names

     598       3 year useful life
  

 

 

    
   $ 2,806      
  

 

 

    

The results of this acquisition were included in the Company’s consolidated operations beginning on March 12, 2013. The pro forma consolidated statements reflecting the operating results of Alter, had it been acquired as of January 1, 2012, would not differ materially from the operating results of the Company as reported for the year ended December 31, 2013. Alter is included in the Company’s Power and Reactive Gas Products group and the Advanced Manufacturing Capital Equipment reportable segment.

Plasmart, Inc.

On August 29, 2012, the Company acquired Plasmart, Inc. (“Plasmart”), located in Daejeon, Korea. Plasmart develops radio frequency (RF) plasma generation and monitoring systems for the semiconductor, flat panel display, active matrix organic light emitting diodes and solar photovoltaic industries. Plasmart’s expertise in RF systems and access to the important Korean market were key drivers in the selection of Plasmart for acquisition. The aggregate purchase price, net of cash acquired, consisted of $22,607, subject to final working capital adjustments in the fourth quarter of 2012 of $1,778. Acquisition related costs of $1,258 and step-up inventory of $303 were expensed as incurred.

 

62


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

The following table summarizes the estimated fair value of the assets acquired and liabilities assumed at the date of the acquisition.

 

Current assets

   $ 5,536   

Property, plant and equipment

     3,565   

Other assets

     554   

Intangible assets

     10,745   

Goodwill

     9,989   
  

 

 

 

Total assets acquired

   $ 30,389   

Debt (Note 15)

     4,561   

Deferred taxes and other liabilities

     3,128   
  

 

 

 

Total liabilities assumed

   $ 7,689   

Total purchase price

   $ 22,700   

Cash acquired

     (93
  

 

 

 

Total purchase price, net of cash acquired

   $ 22,607   
  

 

 

 

The goodwill and other intangible assets associated with the acquisition are not deductible for tax purposes. The following table reflects the allocation of the acquired intangible assets and related estimates of useful lives. These acquired intangibles will be amortized on a straight-line basis.

 

Current developed technology

   $ 5,029       7.5 – 9.5 years useful life

Trade names

     335       7 year useful life

Customer relationships

     5,381       10 year useful life
  

 

 

    
   $ 10,745      
  

 

 

    

This transaction resulted in an amount of purchase price that exceeded the estimated fair value of tangible and intangible assets, which was allocated to goodwill. The Company believes that the amount of goodwill relative to identifiable intangible assets relates to several factors including: (1) potential buyer-specific synergies related to market opportunities for a combined product offering and (2) potential to leverage the Company’s sales force and intellectual property to attract new customers and revenue.

The results of this acquisition were included in the Company’s consolidated operations beginning on August 29, 2012. The pro forma consolidated statements reflecting the operating results of Plasmart, had they been acquired as of January 1, 2012, would not differ materially from the operating results of the Company as reported for the year ended December 31, 2012. Plasmart is included in the Power and Reactive Gas Products group and the Advanced Manufacturing Capital Equipment reportable segment.

 

63


Table of Contents

MKS INSTRUMENTS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(in thousands, except share and per share data)

 

11)

Goodwill and Intangible Assets

Goodwill

The changes in the carrying amount of goodwill and accumulated impairment losses were as follows:

 

     2014     2013  
     Gross
Carrying
Amount
    Accumulated
Impairment
Loss
    Net     Gross
Carrying
Amount
     Accumulated
Impairment
Loss
    Net  

Beginning balance at January 1

   $ 290,323      $ (139,414   $ 150,909      $ 290,147       $ (139,414   $ 150,733   

Acquired goodwill(1)

     41,993               41,993                         

Foreign currency translation

     (521            (521     176                176   
  

 

 

   

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Ending balance at December 31

   $ 331,795      $ (139,414   $ 192,381      $ 290,323       $ (139,414   $ 150,909   
  

 

 

   

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

 

(1)

During the second quarter of 2014, the Company recorded $41,612 of goodwill related to the May 30, 2014 GP acquisition. During the first quarter of 2014, the Company recorded a purchase accounting adjustment for $381 related to the March 12, 2013 purchase of Alter S.r.l.

Goodwill associated with each the Company’s reportable segments is as follows:

 

     Years Ended December 31,  
           2014                  2013        

Reportable segment:

     

Advanced Manufacturing Capital Equipment

   $ 184,234       $ 142,065   

Analytical Solutions Group

     8,668         8,668   

Europe Region Sales & Service

               

Asia Region Sales & Service

               

Foreign currency translation