ASTI-2012.12.31-10K
Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
______________________________________________________ 
FORM 10-K
 ______________________________________________________
(Mark One)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2012
or
o
TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Transition Period from             to             
Commission File No. 001-32919
______________________________________________________ 
Ascent Solar Technologies, Inc.
(Exact name of registrant as specified in its charter)
 _______________________________________________________
Delaware
 
20-3672603
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification No.)
 
 
 
12300 Grant Street, Thornton, CO
 
80241
(Address of principal executive offices)
 
(Zip Code)
Registrant’s telephone number including area code: 720-872-5000 
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of Each Exchange on Which Registered
Common Stock, $0.0001 par value per share
 
The NASDAQ Global Market
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes  o    No  x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act. Yes  o    No  x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    x  Yes    o  No


Table of Contents

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act:
Large accelerated filer
 
o
  
Accelerated filer
 
o
 
 
 
 
Non-accelerated filer
 
o  (Do not check if a smaller reporting company)
  
Smaller reporting company
 
x
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  o    No  x
As of June 30, 2012, the last business day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of the registrant’s common stock held by non-affiliates was approximately $21.4 million based upon the last reported sale price of the registrant’s common stock on that date as reported by NASDAQ.
As of February 28, 2013, there were 51,176,906 shares of our common stock issued and outstanding.


Table of Contents


ASCENT SOLAR TECHNOLOGIES, INC.
Form 10-K Annual Report
for the Fiscal Year ended December 31, 2012
Table of Contents
 
 
 
 
 
 
Page    
 
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
 
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
Item 9.
Item 9A.
Item 9B.
 
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
 
Item 15.
 
 


3

Table of Contents

FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K includes “forward-looking statements” that involve risks and uncertainties. Forward-looking statements include statements concerning our plans, objectives, goals, strategies, future events, future net sales or performance, capital expenditures, financing needs, plans or intentions relating to acquisitions, business trends and other information that is not historical information and, in particular, appear under headings including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business.” When used in this Annual Report, the words “estimates,” “expects,” “anticipates,” “projects,” “plans,” “intends,” “believes,” “forecasts,” “foresees,” “likely,” “may,” “should,” “goal,” “target” and variations of such words or similar expressions are intended to identify forward-looking statements. All forward-looking statements are based upon information available to us on the date of this Annual Report.
These forward-looking statements are subject to risks, uncertainties and other factors, many of which are outside of our control, that could cause actual results to differ materially from the results discussed in the forward-looking statements, including, among other things, the matters discussed in this Annual Report in the sections captioned “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Factors you should consider that could cause these differences are:
Our limited operating history and lack of profitability;
Our ability to secure equity or debt or other financing necessary to fund our operations and the acquisition of additional operating capacity;
Our ability to successfully design, manufacture and sell our newly introduced EnerPlex™ line of consumer products;
Our ability to meet our cost and performance metrics and to implement the production plan required to meet demand for our products;
Our ability to develop, internally and with partners, applications for our photovoltaic products;
Our ability to develop demand for, and sales of, our photovoltaic products;
Our ability to obtain necessary or desired patents and certifications for our photovoltaic modules;
Our ability to qualify and effectively operate production tools pursuant to our business plan and within budgeted amounts;
Our competitive position and that of our photovoltaic modules relative to others in the photovoltaic and thin film markets;
Our continued investment in research and development, and our ability to remain competitive through improvement of our existing technology and development of new technologies;
The extent to which we are able to manage the growth of our operations effectively, both domestically and abroad, whether directly owned or indirectly through licenses;
The supply, availability and price of equipment, components and raw materials, including the elements needed to produce our photovoltaic modules;
The emergence of disruptive or competing technologies in the energy industry;
The extent to which our interests align with or deviate from that of TFG Radiant Investment Group Ltd. and its
affiliates (“TFG Radiant”), our largest stockholder;
Our ability to expand and protect the intellectual property portfolio that relates to our photovoltaic modules and processes;
Our ability to attract and retain key executives and employees;
The continual good standing of our license from ITN Energy Systems, Inc.;
Our ability to maintain the listing of our common stock on the Nasdaq Global or Capital Market;

4

Table of Contents

The commencement or outcome of legal proceedings against us or by us, including ongoing ligation and proceedings relating to environmental matters or intellectual property rights; Foreign currency exchange fluctuations, political instability in certain foreign markets or the general state of geopolitical affairs; and
General economic and business conditions, and in particular, conditions specific to consumer electronics and the solar power industry.
There may be other factors that could cause our actual results to differ materially from the results referred to in the forward-looking statements. We undertake no obligation to publicly update or revise forward-looking statements to reflect subsequent events or circumstances after the date made or to reflect the occurrence of unanticipated events, except as required by law.
References to “we,” “us,” “our,” “Ascent,” “Ascent Solar” or the “Company” in this Annual Report mean Ascent Solar Technologies, Inc.



5

Table of Contents

PART I
Item 1. Business
Business Overview
We are a development stage company formed in October 2005 to commercialize flexible photovoltaic (“PV”) modules using proprietary technology. Our technology was initially developed at ITN Energy Systems, Inc. (“ITN”) beginning in 1994 and subsequently assigned and licensed to us. Our proprietary manufacturing process deposits multiple layers of materials, including a thin film of highly efficient copper-indium-gallium-diselenide (“CIGS”) semiconductor material, on a flexible, lightweight, plastic substrate using a roll-to-roll manufacturing process and then laser patterns the layers to create interconnected PV cells, or PV modules, in a process known as monolithic integration. We believe that our technology and manufacturing process, which results in a lighter, flexible module package, provides us with a unique market opportunity relative to both the crystalline silicon (“c-Si”) based PV manufacturers that currently lead the PV market, as well as other thin film PV manufacturers that use substrate materials such as glass, stainless steel or other metals that can be heavier and more rigid than plastics.
Currently, we are producing consumer oriented products focusing on charging devices powered by or enhanced by our solar modules. Products in these markets are priced based on the overall product value proposition as compared with directly competitive products or substitute products rather than on a cost per watt basis, typically used in commodity solar markets. We continue to develop new consumer products and we have adjusted our utilization of our equipment to meet our near term forecast sales.
We believe that our use of CIGS on a flexible, durable, lightweight, high tech plastic substrate will allow for unique and seamless integration of our PV modules into a variety of electronic products, building materials, defense, transportation and space applications, as well as other products and applications that may emerge. For markets that place a high premium on light weight, such as rooftop, defense, space, near space, and aeronautic markets, we believe our materials should provide attractive increases in power-to-weight ratio, and we believe that our materials have higher power-to-area ratios and voltage-to-area ratios than competing flexible PV thin film technologies. These metrics will be critical as we position ourselves to compete in commercial rooftop applications at the appropriate time in the future. We believe that our lightweight flexible technology is transformational in nature, and will provide us advantages in serving the building applied photovoltaic (“BAPV”) and building integrated photovoltaic (“BIPV”) markets in the future.
Product History
In March 2008, we demonstrated initial operating capacity (“IOC”) of our initial production line by initiating production trials as an end to end integrated process. Early IOC production trials resulted in average thin film device efficiencies of 9.5% and small area monolithically integrated module efficiencies of over 7.0%. During 2008 optimization trials resulted in thin film device efficiencies in the 9.5% to 11.5% range and corresponding module efficiencies in the 7.0% to 9.0% range. The test modules measured approximately 15 centimeters wide by 30 centimeters long. During the first quarter of 2009, we began limited production of monolithically integrated flexible CIGS modules in our initial production line. Our primary business model was based upon mass production of solar modules of varying lengths, sizes and configurations. We provided sample modules to potential customers and development partners in various industries to explore integration of our products into new applications.
In July 2009, we obtained independent verification by the U.S. Department of Energy’s National Renewable Energy Laboratory (“NREL”) that our modules measured 10.4% in conversion efficiency. The modules tested at NREL were approximately 15 centimeters wide by 30 centimeters long. In October 2009, NREL verified our achievement of a manufacturing milestone of 14.0% cell efficiency. We also announced a peak efficiency of 11.7% for CIGS modules. Later, in December 2010, we achieved 12.1% module efficiency on the same form factor.     In August 2009, we completed internal qualification testing of a flexible packaging solution which successfully passed the rigorous standard of one thousand (1,000) hours of damp heat testing (85% relative humidity and 85° C temperature) guideline set forth by International Electrotechnical Commission (“IEC”) 61646 standards for performance and long term reliability of thin film solar modules.
In February 2010, three of our product configurations were certified by an independent laboratory on a variety of U.S. Department of Defense (“DOD”) rugged standards known as MIL-STD-810G. In October 2010, we completed full external certification under IEC 61646 at an independent laboratory of a two meter module. Achieving this certification is required for BIPV and BAPV applications used in commercial, industrial and residential rooftop markets. Certification activities will continue as required as we introduce new products and make changes or improvements to our already certified products.

1

Table of Contents

In 2010, we received an award from R&D Magazine and were included in their list of the 100 Most Innovative Technologies based on our process of monolithic integration on polyimide substrate. In 2011, Time Magazine selected us as one of the 50 Best Inventions of the year.
In 2012, we accelerated our transition to a business model focusing on developing PV integrated consumer electronics. In June we launched our new line of consumer products under the EnerPlex™ brand, and introduced our first product, the Surfr™, a solar assisted case and charger for the Apple® iPhone® 4/4S smart phone featuring our ultra light CIGS thin film technology. The charger incorporates our ultra light and thin solar module into a sleek, protective iPhone 4/4S case, along with a thin battery. The charger adds minimal weight and size to an iPhone smart phone, yet provides supplemental charging when needed. In August, we announced the launch of the second version of Surfr, a solar assisted charger for the Samsung® Galaxy S® III, which provides 85% additional battery life.
In December 2012, we launched the EnerPlex Kickr™ and EnerPlex Jumpr™ product series. The EnerPlex Kickr IV is an extremely portable, compact and durable solar charging device, approximately seven inches by seven inches when folded, and weighing only 316 grams, or less than half a pound. The Kickr IV provides 4.5 watt regulated power that can help charge phones, tablets, digital cameras, and other devices. The Kickr IV is ideal for outdoor activities such as camping, hiking and mountain climbing and daily city use. Complementing the Kickr IV is the Jumpr 4400 and the Jumpr 4800, rechargeable, portable battery packs providing from three to five complete charge cycles for a smart phone. Currently, we are working to develop the iPhone® 5 version of the Surfr solar assisted charger. Our consumer products are available to customers through third party distributors and retailers and through our website at www.EnerPlex.biz, our retail website. In 2013, we plan to continue our expansion of distribution channels in the US and worldwide.
We continue to design and manufacture PV integrated consumer electronics as well as portable power applications for commercial and military users. Due to the high durability of the monolithic integration employed by our technology, the capability to customize modules into different form factors and the industry leading light weight and flexibility provided by our modules, we feel that the potential applications for our products are numerous.
Commercialization and Manufacturing Strategy
We manufacture our products by affixing a thin CIGS layer to a flexible, plastic substrate using a large format, roll-to-roll process that permits us to fabricate our flexible PV modules in an integrated sequential operation. We use proprietary monolithic integration techniques that enable us to form complete PV modules with less or no costly back end assembly of inter cell connections. Traditional PV manufacturers assemble PV modules by bonding or soldering discrete PV cells together. This manufacturing step typically increases manufacturing costs and at times proves detrimental to the overall yield and reliability of the finished product. By reducing or eliminating this added step using our proprietary monolithic integration techniques, we believe that we can achieve cost savings in, and increase the reliability of, our PV modules. All tooling necessary for us to meet our near term production requirements is installed in our Thornton, Colorado plant. In 2012 we accelerated the change in strategy initiated in March 2011 when we revised our strategy to focus on applications for emerging and specialty markets, including off grid, military and defense and consumer oriented products. Long term, we believe that the BIPV/BAPV markets will evolve and become an attractive market.
On February 1, 2012, we announced the appointment of Victor Lee as President and Chief Executive Officer. Mr. Lee has served on our Board since November 2011. Mr. Lee is the managing director of Tertius Financial Group Pte Ltd, the joint venture partner with Radiant Group in TFG Radiant.
The addition of TFG Radiant as a major shareholder in August 2011 has significantly improved our capabilities on a number of fronts. TFG Radiant's domicile in China provides us access to high quality, low cost contract manufacturing in Asia through expansion of TFG Radiant existing relationships developed through many years of successful operation in China. Integrating these suppliers into our supply chain enables us to bring our products to market faster. TFG Radiant also provides a global product perspective that significantly improves the product design activities of our Thornton, Colorado designers as they collaborate with designers in Asia. We continue to integrate and improve the design-to-manufacture process where we manufacture modules in our US plant, ship them to Asia for completion into finished goods at low cost and then ship products to all markets we will serve.
We plan to continue the development of our current PV technology to increase module efficiency, improve our manufacturing tooling and process capabilities and reduce manufacturing costs. We also plan to continue to take advantage of research and development contracts to fund a portion of this development.
Advantages of CIGS on a Flexible Plastic Substrate
Thin film PV solutions differ based on the type of semiconductor material chosen to act as a sunlight absorbing layer, and also on the type of substrate on which the sunlight absorbing layer is affixed. We believe that we are the only company

2

Table of Contents

currently focused on commercial scale production of PV modules using CIGS on a flexible, plastic substrate with monolithic integration. We utilize CIGS as a semiconductor material because, at the laboratory level, it has a higher demonstrated cell conversion efficiency than amorphous silicon (“a-Si”) and cadmium telluride (“CdTe”). We also believe that CIGS offers other compelling advantages over both a-Si and CdTe, including:
CIGS versus a-Si:    Although a-Si, like CIGS, can be deposited on a flexible substrate, its conversion efficiency, which already is generally much lower than that of CIGS, measurably degrades when it is exposed to ultraviolet light, including natural sunlight. To mitigate such degradation, manufacturers of a-Si solar cells are required to implement measures that add cost and complexity to their manufacturing processes.
CIGS versus CdTe:    Although CdTe modules have achieved conversion efficiencies that are generally comparable to CIGS in production, we believe that CdTe has never been successfully applied to a flexible substrate on a commercial scale. We believe that the use of CdTe on a rigid, transparent substrate, such as glass, makes CdTe unsuitable for a number of the applications. We also believe that CIGS can achieve higher conversion efficiencies than CdTe in production.
Our choice of substrate material further differentiates us from other thin film PV manufacturers. We believe that the use of a flexible, lightweight, insulating substrate that is easier to install provides clear advantages for our target markets such as where rigid substrates are unsuitable in many associated applications. We also believe that our use of a flexible, plastic substrate provides us significant cost advantages because it enables us to employ monolithic integration techniques on larger components that we believe are unavailable to manufacturers who use flexible, metal substrates. Accordingly, we are able to significantly reduce part count, thereby reducing the need for costly back end assembly of inter cell connections. As the only company, to our knowledge, focused on the commercial production of PV modules using CIGS on a flexible, plastic substrate with monolithic integration, we believe we have the opportunity to address the consumer electronics, defense, transportation, off grid, portable power, aerial and other markets with transformational high quality, value added product applications.
Competitive Strengths
We believe we possess a number of competitive strengths that provide us with an advantage over our competitors.
We are a pioneer in CIGS technology with a proprietary, flexible, lightweight, high efficiency PV thin film product that positions us to penetrate a wide range of attractive high value added markets such as consumer products, off grid, portable power, transportation, defense, aerial, BIPV/BAPV, and other markets. By applying CIGS to a flexible plastic substrate, we have developed a PV module that is efficient, lightweight and flexible, providing unique opportunities for integration into building material products, such as roofing membranes, shingles, siding and facades, metal and composite panels. Commercial rooftops alone are a major segment of the world solar market. The market for electronic components, such as electronic packages, casings, and accessories as well as defense portable power systems, transportation integrated applications and space and near-space solar power application solutions, also may prove to be a significant premium market. Relative to our thin film competitors, we believe that our advantage in thin film CIGS on plastic technology provides us with a superior product offering for these strategic market segments.
We have the ability to manufacture PV modules for different markets and for customized applications without altering our production processes. Our ability to produce PV modules in customized shapes and sizes, or in a variety of shapes and sizes simultaneously, without interrupting our production flow provides us with flexibility in addressing target markets and product applications, and allows us to respond quickly to changing market conditions. Many of our competitors are limited by their technology and/or their manufacturing processes to a more restricted set of product opportunities.
Our integrated, roll-to-roll manufacturing process and proprietary monolithic integration techniques provide us a potential cost advantage over our competitors. Historically, manufacturers have formed PV modules by manufacturing individual solar cells and then interconnecting them. Our large format, roll-to-roll manufacturing process allows for integrated production. In addition, our proprietary monolithic integration techniques allow us to utilize laser patterning to create interconnects, thereby creating PV modules at the same time we create PV cells. In so doing, we are able to reduce or eliminate an entire back end processing step, saving time as well as labor and manufacturing costs relative to our competitors.
Our strategic relationship with TFG Radiant provides us with direct access to a potentially large customer base in the East Asia market, sophisticated low cost contract manufacturing suppliers and consumer product design capability. TFG Radiant is a joint venture of Radiant Group, a Chinese conglomerate in construction and real estate, and Tertius Financial Group, a private investment firm based in Singapore. The Radiant Group, with more than 3,000 personnel, operates various businesses across China, Indonesia, Singapore and Malaysia, including metal roofing and

3

Table of Contents

facades, import/export trading, real estate investment, project management and consultation, new energy development, manufacturing and distribution and gold mining.
Our proven research and development capabilities position us to continue the development of next generation PV modules and technologies. Our ability to produce CIGS based PV modules on a flexible plastic substrate is the result of a concerted research and development effort that began more than seventeen years ago. We continue to pursue research and development in an effort to drive efficiency improvements in our current PV modules and to work toward next generation technologies and additional applications.
Our manufacturing process can be differentiated into two distinct functions, a front end module manufacturing process and a back end packaging process. Our ability to produce finished unpackaged rolls of CIGS material for shipment worldwide to customers for encapsulation and integration into various products enhances our ability to work with partners internationally.
Markets and Marketing Strategy
In the past year, we shifted our strategic focus away from rooftop applications to consumer and specialty solar markets. This new strategy enables us to fully leverage the unique advantages of our technology including flexibility, toughness and attractive power to weight and power to area performance. It furthermore enables us to offer unique, differentiated solutions in large markets with less competition, and more attractive pricing. In 2012, we launched our EnerPlex line of personal and portable solar solutions and accessories. This represented a significant paradigm shift for us and moved us into the realm of supplying complete consumer product solutions as opposed to strictly commercial solar modules. We also remain focused on specialty applications which can fully leverage the unique properties of our award winning CIGS technology. These include aerospace, military and transportation applications. Our marketing efforts in 2013 will be primarily focused on expanding consumer awareness of our EnerPlex brand. The EnerPlex brand presently includes solar and battery integrated smartphone cases (EnerPlex Surfr), portable outdoor foldable solar chargers (EnerPlex Kickr) and complimentary accessories such as rechargeable batteries (EnerPlex Jumpr). These products serve a variety of consumers requiring clean and practical, range extending power solutions for electronic devices either indoors or outdoors. Target consumers include frequent travelers, students, business professionals and those spending extended time outdoors away from the power grid (hunters, campers, park rangers, mining, constructions, etc.). In addition, we are focused on expanding the EnerPlex product line significantly in 2013.
Our EnerPlex sales strategy includes selling directly to large retailers as well as a global set of wholesalers and distributors. We are establishing key distributor relationships throughout the world, by territory, typically on a non exclusive basis. In 2012, we established our e-commerce presence through www.EnerPlex.biz, where our retail customers can purchase our EnerPlex products and have them delivered directly. Our products are also available on www.amazon.com. We believe this multi-faceted strategy will enable us to make our EnerPlex brand immediately available to large numbers of consumers. In 2013, we plan to continue our expansion of distribution channels in the US and worldwide.
In the specialty markets segment, our modules can provide lightweight, high performance, durable power solutions for commercial transportation, automotive, aerospace, military and durable off grid solutions. In this segment, our marketing efforts will continue to focus on the formation of strategic relationships with key partners, including original equipment manufacturers (“OEMs”), system integrators, resellers and distributors. Our goal is to leverage our unique, transformational technology to enable power generation for a wide variety of applications within these markets.
The military market has a unique set of requirements that we feel are well suited to our products. When integrated with fabric to form re-deployable arrays, our highly efficient, rugged, lightweight modules may allow soldiers to minimize battery loads, reduce the use of conventional fuels, and increase safety through the streamlining of fuel transport operations. We are also working to expand our foldable line of outdoor solar chargers which are well suited for individual soldier or platoon power needs. Our modules can also provide a reliable source of renewable power in remote areas, regardless of local infrastructure. We will continue to reach the military market primarily through partnerships with top systems providers. Transportation integrated PV, or integration of our flexible solar modules with vehicles such as commercial trucks, buses, trains and passenger cars, is another market segment that represents a significant opportunity. Due to their flexible form and durable, lightweight properties, our modules can be fitted to the exterior of various vehicles to provide supplemental power without significantly affecting the aerodynamics, weight and aesthetics of the vehicle. We are currently working with multiple integrators and OEMs to develop effective value added solutions for this market.
In addition, an opportunity may exist for the integration of space, near space, and aeronautic applications with flexible solar modules. Customers in this market have historically required a high level of durability and conversion efficiency from solar module suppliers, and we believe that our products are aligned to compete in this premium market. We expect opportunities in this segment to develop gradually due to customers' extensive development, testing and evaluation processes.

4

Table of Contents

We continue to supply our strategic partners with PV modules to support our partners' development, testing and certification of new integrated PV products, including product testing by several branches of the U.S. military. We believe that our high power density, high quality flexible solar modules enable new applications for solar power. By creating mutually beneficial partnerships and strategically penetrating the markets discussed above, we plan to transform the landscape of solar power generation with truly innovative end products.
Competition

We have shifted our strategic focus away from rooftop applications to consumer and specialty solar markets. We believe our thin film, monolithically integrated CIGS technology enables us to deliver sleek, lightweight, tough, high performance solutions to serve these markets as competitors from other thin film and c-Si companies emerge. The landscape of thin film manufacturers encompasses a broad mix of technology platforms at various stages of development, and consists of a number of medium and small companies. In 2011 and 2012, the landscape changed significantly amid PV industry consolidation and rationalization. Companies currently developing or selling CIGS-based PV modules include Avancis GmbH & Co. KG, Flisom AG, Global Solar Energy, Inc., HelioVolt Corporation, MiaSole, Nanosolar, Inc., Nuvosun, Inc., Odersun AG, Solibro GmbH, Solarion AG, Solar Frontier, SoloPower, Inc., and Stion. A number of manufacturers that traditionally have manufactured and sold c-Si-based modules have entered, or in the future may enter, the market for thin film PV modules, and potentially, CIGS-based PV modules. These efforts have been initiated both through internal development and through acquisition of companies or the purchase of turnkey solutions offered by PV equipment providers.

The market for traditional, grid connected PV products is dominated by large manufacturers of c-Si technology, although thin film technology on glass has begun to emerge among the major players. In 2011, the five largest of these manufacturers included: Suntech Power Holdings Co., Ltd. (China), First Solar (US), JA Solar Holdings Co., Ltd. (China), Yingli Green Energy Holding Co. Ltd. (China), and Trina Solar (China). We anticipate that while these leaders may continue to dominate the market with their silicon based products, thin film manufacturers will likely capture an increasingly larger share of the market, as is evident from the success of First Solar (CdTe) and Solar Frontier (CIGS) both among the top 20 producers worldwide. In 2011, crystalline silicon PV technology represented approximately 88% of global market share, a slight increase over 2010 at 86%, with the balance captured by thin film.

We believe that our modules offer unique advantages. Their flexible form factor and high power density enable use on weight constrained or architecturally complex rooftops that may be unsuitable for glass based modules. Product design agility and customer focused development both yield modules that could be integrated into virtually any product to create a source of renewable energy. Whether compared to glass based or flexible modules, our products offer competitive advantages making them unique in comparison to competing products.

We define the consumer and portable power space as comprising solar powered solutions in the sub-watt range (i.e. smartphone solar chargers) all the way up the several hundred watts of power (i.e., outdoor solar chargers for camping, military platoons or outdoor work). Competitors in the consumer products space include companies that design and distribute solar charging solutions but outsource manufacturing. These include Goal Zero, Voltaic, A-Solar, Solio, PowerTraveller, Solar Components and RDK Products. Mono or polycrystalline solar technologies are common in these products. Other competitors in this segment include thin-film solar manufacturers who provide a complete product under their company name or brand. These companies include Global Solar Energy (Sunlinq brand), PowerFilm, Trony and more recently Alta Devices. We believe our differentiated technology lends itself to delivering competitive solutions in this emerging market for personal and portable solar charging solutions. The overall market for such products is large and growing. We believe our products serve this and other large markets for personal and portable solar chargers.

In addition to the markets mentioned above, an opportunity may exist for the integration of space, near space, and aeronautic vehicles with flexible solar modules. Customers in this market have historically required a high level of durability, conversion efficiency, and light weight from solar module suppliers, and we believe that our products are aligned to compete in this premium market. We expect opportunities in this segment to develop gradually over time considering the extensive development, testing and evaluation processes required by customers.
Research and Development and Intellectual Property
We intend to continue to invest in research and development in order to provide near term improvements to our manufacturing process and products, as well as to identify next generation technologies relevant to both our existing and potential new markets. During 2012, 2011 and 2010 we incurred approximately $20.7 million, $24.1 million and $24.4 million, respectively, in research and development costs.

5

Table of Contents

Our technology was initially developed at ITN beginning in 1994. In early 2006, ITN assigned to us certain CIGS PV-specific technologies, and granted to us a perpetual, exclusive, royalty free, worldwide license to use these technologies in connection with the manufacture, development, marketing and commercialization of CIGS PV to produce solar power. In addition, certain of ITN’s existing and future proprietary process and control technologies, although non specific to CIGS PV, were assigned to us. ITN retained the right to conduct research and development activities in connection with PV materials, and we agreed to grant a license back to ITN of improvements to the licensed technologies and intellectual property that are outside of the CIGS PV field.
We protect our intellectual property through a combination of trade secrets and patent protections. We own the following patents and published patent applications:
1.
“Apparatus and Method of Production of Thin-Film Photovoltaic Modules” (US Patent No. 7,271,333) (issued September 18, 2007)
2.
“Flexible Photovoltaic Array With Integrated Wiring And Control Circuitry, And Associated Methods” (US Patent No. 7,812,247) (issued October 12, 2010) (co-owned with PermaCity Corporation)
3.
“Machine and Process for Sequential Multi-Sublayer Deposition of Copper Indium Gallium Diselenide Compound Semiconductors” (US Patent No. 8,021,905) (issued September 20, 2011)
4.
“Systems and Processes for Bifacial Collection and Tandem Junctions Using a Thin film Photovoltaic Device” (US 8,124,870) (issued February 28, 2012)
5.
“Reinforcing Structures for Thin film Photovoltaic Device Substrates, and Associated Methods” (US 8,207,442) (issued June 26, 2012)
6.
“Flexible High-Voltage Adaptable Current Photovoltaic Modules and Associated Methods” (US 11/877,632) (filed October 23, 2007) (co-owned with PermaCity Corporation)
7.
"Flexible Photovoltaic Array with Integrated Wiring and Control Circuitry, and Associated Methods" (12/901,963) (filed October 11, 2010) (co-owned with PermaCity Corporation) “Array of Monolithically Integrated ThinFilm Photovoltaic Cells and Associated Methods” (US 12/143,713) (filed June 20, 2008)
8.
“Hybrid Multi-Junction Photovoltaic Cells and Associated Methods” (12/174,626) (filed July 16, 2008)
9.
“Apparatus and Method for Hybrid Photovoltaic Device Having Multiple, Stacked, Heterogeneous Semiconductor Junctions” (US 12/967,005) (filed December 13, 2010)
10.
“Cd-Free, Oxide Buffer Layers for Thin Film CIGS Solar Cells By Chemical Solution Deposition Methods” (US 13/227,935) (filed September 8, 2011)
11.
“Cd-Free, Oxide Buffer Layers for Thin Film CIGS Solar Cells by Chemical Solution Deposition Methods” (PCT/ US2011/050811) (filed September 8, 2011)
12.
“Apparatus and Method for Hybrid Photovoltaic Device Having Multiple, Stacked, Heterogeneous, Semiconductor Junctions” (PCT/US2011/064697) (filed December 13, 2011)
13.
“Multilayer Thin Film Back Contact System for Flexible Photovoltaic Devices on Polymer Substrates” (PCT/US2012/050398) (filed August 8, 2012)
14.
“Systems and Processes for Bifacial Collection and Tandem Junctions Using a Thin film Photovoltaic Device” (US 13/406,376) (filed February 27, 2012)
In addition, we have eight unpublished pending patent applications in related areas, six of which were filed in 2012.
In order to protect our branding of the EnerPlex™ mark and design, as well as various slogans and product family names, we have the following US trademark applications that have been filed and published. For each of these filed and published applications, we have received Notice of Allowance from the US Patent and Trademark Office:
1. EnerPlex™ (mark and design) - (85/638,696)
2. “Transforming Everyday Life™” - (85/708,195)

6

Table of Contents

In addition, we have five other unpublished US trademark applications, and have filed the trade name EnerPlex™ in 21 countries, and “Transforming Everyday Life™” in 8 countries to date.
Suppliers
We rely on several unaffiliated companies to supply certain raw materials used during the fabrication of our PV modules and PV integrated electronics. We acquire these materials on a purchase order basis and do not have long term purchase quantity commitments with the suppliers, although we may enter into such contracts in the future. We currently acquire all of our high temperature plastic from one supplier, although alternative suppliers of similar materials exist. We purchase component molybdenum, copper, indium, gallium, selenium and indium tin oxides from a variety of suppliers. We also currently are in the process of identifying and negotiating arrangements with alternative suppliers of materials in the United States and Asia.
The manufacturing equipment and tools used in our production process have been purchased from various suppliers in Europe, the United States and Asia. Although we have had good relations with our existing equipment and tools suppliers, we monitor and explore opportunities for developing alternative sources to drive our manufacturing costs down.
Employees
As of December 31, 2012, we had 94 full time employees.
Company History
We were formed in October 2005 from the separation by ITN of its Advanced Photovoltaic Division and all of that division’s key personnel and core technologies. ITN, a private company incorporated in 1994, is an incubator dedicated to the development of thin film, PV, battery, fuel cell and nano technologies. Through its work on research and development contracts for private and government entities, ITN developed proprietary processing and manufacturing know-how applicable to PV products generally, and to CIGS PV products in particular. Our company was established by ITN to commercialize its investment in CIGS PV technologies. In January 2006, ITN assigned to us all its CIGS PV technologies and trade secrets and granted to us a perpetual, exclusive, royalty free worldwide license to use certain of ITN’s proprietary process, control and design technologies in the production of CIGS PV modules. Upon receipt of the necessary government approvals in January 2007, ITN assigned government funded research and development contracts to us and also transferred the key personnel working on the contracts to us.
Corporate Information
We were incorporated under the laws of Delaware in October 2005. Our principal business office is located at 12300 Grant Street, Thornton, Colorado 80241, and our telephone number is (720) 872-5000. Our website address is www.ascentsolar.com. Information contained on our website or any other website does not constitute, and should not be considered, part of this Annual Report.
Available Information
We file with the Securities and Exchange Commission (“SEC”) our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports, proxy statements and registration statements. You may read and copy any material we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. You may also obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains an internet site at http://www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers, including us, that file electronically. We make available free of charge on or through our website at www.ascentsolar.com our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (“Exchange Act”) as soon as reasonably practicable after we file these materials with the SEC.
Item 1A. Risk Factors
The risks included here are not exhaustive or exclusive. Other sections of this Annual Report may include additional factors which could adversely affect our business, results of operations and financial performance. We operate in a very competitive and rapidly changing environment. New risk factors emerge from time to time, and it is not possible for management to predict all such risk factors, nor can it assess the impact of all such risk factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

7

Table of Contents

Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
Risks Relating to Our Business
We have a limited history of operations, have not generated significant revenue from operations and have had limited sales of our products.
We have a limited operating history and have generated limited revenue from operations. Currently we are producing consumer oriented products in quantities necessary to meet current demand. Under our current business plan, we expect losses to continue until annual revenues and gross margins reach a high enough level to cover operating expenses. We plan to continue manufacturing at our current facilities and we are leveraging contract manufacturers in Asia for components and for final assembly of finished goods. Our ability to achieve our business, commercialization and expansion objectives will depend on a number of factors, including whether:
we can generate customer acceptance of and demand for our products;
we successfully ramp up commercial production on the equipment installed;
our products are successfully and timely certified for use in our target markets;
we successfully operate production tools to achieve the efficiencies, throughput and yield necessary to reach our cost targets;
the products we design are saleable at a price sufficient to generate profits;
our strategic alliance with TFG Radiant results in the design, manufacture and sale of sufficient products to achieve profitability;
we raise sufficient capital to enable us to reach a level of sales sufficient to achieve profitability on terms favorable to us;
we are able to be successful in designing, manufacturing, marketing, distributing and selling our newly introduced line of consumer oriented products;
we effectively manage the planned ramp up of our operations;
we successfully develop and maintain strategic relationships with key partners, including OEMs, system integrators and distributors, who deal directly with end users in our target markets;
our ability to maintain the listing of our common stock on the NASDAQ Global Market or Capital Market;
our ability to achieve projected operational performance and cost metrics;
our ability to enter into commercially viable licensing, joint venture, or other commercial arrangements; and
availability of raw materials.
Each of these factors is critical to our success, and accomplishing each of these tasks may take longer or cost more than expected, or may never be accomplished. It also is likely that problems that we cannot now anticipate will arise. If we cannot overcome these problems, our business, results of operations and financial condition could be materially and adversely affected.
We have to date incurred net losses and may be unable to generate sufficient sales in the future to become profitable.
We incurred a net loss of $28.8 million for the year ended December 31, 2012 and reported an accumulated deficit of $211.8 million as of December 31, 2012. We expect to incur net losses in the near term. Our ability to achieve profitability depends on a number of factors, including market acceptance of our consumer oriented products at competitive prices. If we are unable to generate sufficient revenue to achieve profitability and positive cash flows, we may be unable to satisfy our commitments and may have to discontinue operations.
Our newly introduced EnerPlex line of consumer oriented products exposes us to many new risks and uncertainties.

8

Table of Contents

Following the appointment of our new President and CEO in February 2012, we repositioned our business model with an immediate focus into developing downstream consumer products. In 2012 we launched our new EnerPlex brand line of consumer products, and introduced the first product under the EnerPlex brand with a solar assisted mobile phone charger incorporating our CIGS PV thin film technology. This new line of consumer oriented products exposes us to many risks and uncertainties that are new to our business.
We have extremely limited experience in the design, manufacture, marketing, distribution and sale of consumer oriented products. Our ability to be successful with our newly introduced line of consumer oriented products will depend on a number of factors, including whether:
we can achieve and maintain customer acceptance of our new consumer oriented products;
we can rapidly develop and successfully introduce large numbers of new consumer oriented products in response to changing consumer preferences, the introduction of new consumer electronics products (such as new mobile phone models) that our EnerPlex products are designed to integrate with, and the introduction of new products by competing manufacturers;
we can maintain an adequate level of product quality over multiple consumer oriented products which must be designed, manufactured and introduced rapidly to keep pace with changing consumer preferences and competitive factors;
we can successfully manage our third party contract manufacturers located outside the U.S. on whom we are heavily dependent for the production of our consumer oriented products;
we can successfully distribute our consumer oriented products through distributors, wholesalers, internet retailers and brick and mortar retailers (many of whom distribute products from competing manufacturers) on whom we are heavily dependent; and
we can successfully manage the substantial inventory and other asset risks associated with the manufacture and sale of consumer electronic products, given the rapid and unpredictable pace of product obsolescence in such consumer markets.
Our business is based on a new and unproven technology, and if our PV modules or processes fail to achieve the performance and cost metrics that we expect, then we may be unable to develop demand for our PV modules and generate sufficient revenue to support our operations.
Our CIGS on flexible plastic substrate technology is a new and unproven technology in commercial scale production. Our business plan and strategies assume that we will be able to achieve certain milestones and metrics in terms of throughput, uniformity of cell efficiencies, yield, encapsulation, packaging, cost and other production parameters. We cannot assure you that our technology will prove to be commercially viable in accordance with our plan and strategies. Further, we or our strategic partners and licensees may experience operational problems with such technology after its commercial introduction that could delay or defeat the ability of such technology to generate revenue or operating profits. If we are unable to achieve our targets on time and within our planned budget, then we may not be able to develop adequate demand for our PV modules, and our business, results of operations and financial condition could be materially and adversely affected.
Our failure to further refine our technology and develop and introduce improved PV products could render our PV modules uncompetitive or obsolete and reduce our net sales and market share.
Our success requires that we invest significant financial resources in research and development to keep pace with technological advances in the solar energy industry. However, research and development activities are inherently uncertain, and we could encounter practical difficulties in commercializing our research results. Our expenditures on research and development may not be sufficient to produce the desired technological advances, or they may not produce corresponding benefits. Our PV modules may be rendered obsolete by the technological advances of our competitors, which could harm our results of operations and adversely impact our net sales and market share.
Failure to expand our manufacturing capability successfully at our facilities or through our strategic alliances would adversely impact our ability to sell our products into our target markets and would materially and adversely affect our business, results of operations and financial condition.
Our growth plan calls for production and operation at our facility and at contract manufacturers in Asia. Successful operations will require substantial engineering and manufacturing resources and is subject to significant risks, including risks of cost overruns and delays, risks that we may not be able to successfully operate. Furthermore, we may never be able to operate our production processes in high volume or at the volumes projected, make planned process and equipment improvements, attain projected manufacturing yields or desired annual capacity, obtain timely delivery of components, or hire and train the

9

Table of Contents

additional employees and management needed to scale our operations. Failure to meet these objectives on time and within our planned budget could materially and adversely affect our business, results of operations and financial condition.
We may be unable to manage the expansion of our operations and strategic alliances effectively.
We will need to significantly expand our operations and form beneficial strategic alliances in order to reduce manufacturing costs through economies of scale and partnerships, secure contracts of commercially material amounts with reputable customers and capture a meaningful share of our target markets. To manage the expansion of our operations and alliances, we will be required to improve our operational and financial systems, oversight, procedures and controls and expand, train and manage our growing employee base. Our management team will also be required to maintain and cultivate our relationships with partners, customers, suppliers and other third parties and attract new partners, customers and suppliers. In addition, our current and planned operations, personnel, facility size and configuration, systems and internal procedures and controls, even when augmented through strategic alliances, might be inadequate or insufficient to support our future growth. If we cannot manage our growth effectively, we may be unable to take advantage of market opportunities, execute our business strategies or respond to competitive pressures, resulting in a material and adverse effect to our business, results of operations and financial condition.
We depend on a limited number of third party suppliers for key raw materials, and their failure to perform could cause manufacturing delays and impair our ability to deliver PV modules to customers in the required quality and quantity and at a price that is profitable to us.
Our failure to obtain raw materials and components that meet our quality, quantity and cost requirements in a timely manner could interrupt or impair our ability to manufacture our products or increase our manufacturing cost. Most of our key raw materials are either sole sourced or sourced by a limited number of third party suppliers. As a result, the failure of any of our suppliers to perform could disrupt our supply chain and impair our operations. Many of our suppliers are small companies that may be unable to supply our increasing demand for raw materials as we implement our planned expansion. We may be unable to identify new suppliers in a timely manner or on commercially reasonable terms. Raw materials from new suppliers may also be less suited for our technology and yield PV modules with lower conversion efficiencies, higher failure rates and higher rates of degradation than PV modules manufactured with the raw materials from our current suppliers.
Our planned production ramp up and continuing operations will require additional capital which we may not be able to obtain on favorable terms, if at all or without dilution to our stockholders.
Our planned production ramp up and continuing operations will require additional capital. We currently are unable to determine what forms of financing, if any, will be available to us. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our existing stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we raise additional funds through debt financing, which may involve restrictive covenants, our ability to operate our business may be restricted. We cannot assure you that additional financing will be available on terms favorable to us, or at all. If adequate funds are not available or are not available on acceptable terms, if and when needed, our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our products, expand capacity or otherwise respond to competitive pressures could be significantly limited, and our business, results of operations and financial condition could be materially and adversely affected.
In addition, the terms of a loan we obtained from the Colorado Housing and Finance Authority (“CHFA”) in connection with our purchase and improvement of our Thornton, Colorado facility contain covenants that limit our ability, without the consent of CHFA, to create or incur additional indebtedness (other than obligations created or incurred in the ordinary course of business); merge or consolidate with any other entity; or make loans or advances to our officers, shareholders, directors or employees. The presence of these negative covenants gives CHFA the ability to bar us from engaging in certain transactions in the future that we may determine are necessary or advisable to meet our business objectives, including debt offerings and acquisitions of or by other companies. If CHFA were to withhold its written consent under these or other circumstances, we could be forced to prepay such loans at a premium, which could adversely affect our business, results of operations and financial condition.
Future sales or the potential for future sales of our securities may cause the trading price of our common stock to decline and could impair our ability to raise capital.
Sales of a substantial number of shares of our common stock or other securities in the public markets, or the perception that these sales may occur, could cause the market price of our common stock or other securities to decline and could materially impair our ability to raise capital through the sale of additional securities. A large number of our outstanding shares are not

10

Table of Contents

registered under the Securities Act of 1933, as amended. If and when these shares are registered or become eligible for sale to the public market, the market price of our common stock could decline.
We currently have certified a limited number of BIPV/BAPV PV modules and have recorded limited sales of such products; further, we expect that significant BIPV/BAPV module sales will not occur for some time.
In 2010, an independent laboratory certified a certain one of our prototype products under the IEC 61646 standards. The successful conclusion of this testing established the viability of a flexible packaging solution that will endure over a long period of time. Certain BIPV/BAPV applications require certification as a prerequisite to sales of the product. Obstacles in achieving these certifications could negatively impact our revenue or profitability. In addition, as we develop new products and product families, new certifications will be required. Delays in obtaining these certifications could have a negative impact on our financial results. We expect that it will be some time before we can determine whether our expectations relating to our products and their acceptance into BIPV/BAPV markets and the profitability of selling into those markets are confirmed. Further, because we will be required to invest substantial resources in pursuing BIPV/BAPV markets in advance of any major revenue stream that may result from such investments, an unanticipated or longer than expected delay of revenue ramp up could put a strain on our resources, adversely affecting our business, results of operations and financial condition, and could require us to seek additional capital.
If we are unable to find technologically satisfactory and economically viable packaging solutions for BIPV/BAPV products for use in target applications or markets, our business and results of operations may be materially and adversely affected.
In order to be used for a particular application or in a particular market, our PV modules must be packaged in a way that satisfies the environmental and usage demands or certification requirements of the application or market. The BIPV/BAPV market typically requires certain independent certifications, and a demonstration that the product can survive designated adverse weather and other environmental conditions for an anticipated lifecycle of twenty to twenty-five years. We have several types of packaging that are in various states of testing, but until such time as cost effective and technologically satisfactory solutions have been demonstrated over a period of time, our sales and revenue into those affected markets may be materially limited or negatively affected.
Our products may never gain sufficient market acceptance, in which case we would be unable to sell our products or achieve profitability.
Demand for our products may never develop sufficiently, and our products may never gain market acceptance, if we fail to produce products that compare favorably against competing products on the basis of cost, quality, weight, efficiency and performance. Demand for our products also will depend on our ability to develop and maintain successful relationships with key partners, including distributors, retailers, OEMs, system integrators and value added resellers. If our products fail to gain market acceptance as quickly as we envision or at all, our business, results of operations and financial condition could be materially and adversely affected.
We are targeting emerging markets for a significant portion of our planned product sales. These markets are new and may not develop as rapidly as we expect, or may not develop at all.
Our target markets include consumer electronics, defense and portable power, transportation, space and near space and BIPV/BAPV. Although certain areas of these markets have started to develop, we believe they are in their infancy. We believe these markets have significant long term potential, however, some or all of these markets may not develop and emerge as we expect. If the markets do develop as expected, there may be other products that could provide a superior product or a comparable product at lower prices than our products. If these markets do not develop as we expect, or if competitors are better able to capitalize on these markets our revenues and product margins may be negatively affected.
Failure to consummate strategic relationships with key partners in our various target market segments, such as consumer electronics, defense and portable power, transportation, space and near space and BIPV/BAPV, and the respective implementations of the right strategic partnerships to enter these various specified markets, could adversely affect our projected sales, growth and revenues.
We intend to sell thin film PV modules for use in consumer electronics, defense and portable power systems, transportation, space and near space solar panel applications and BIPV/BAPV. Our marketing and distribution strategy is to form strategic relationships with distributors and value added resellers to provide a foothold in these target markets. If we are unable to successfully establish working relationships with such market participants or if, due to cost, technical or other factors, our products prove unsuitable for use in such applications; our projected revenues and operating results could be adversely affected.

11

Table of Contents

If sufficient demand for PV solutions does not develop or takes longer to develop than we anticipate, we may be unable to grow our business, generate sufficient revenue to attain profitability or continue operations.
The solar energy industry is at a relatively early stage of development, and the extent to which PV modules, including our own, will be widely adopted is uncertain. If PV technology proves unsuitable for widespread adoption or if demand for PV modules fails to develop sufficiently, we may be unable to grow our business, generate sufficient sales to attain profitability or continue operations. Many factors, many of which are outside of our control, may affect the viability of widespread adoption of PV technology and demand for PV modules.
We face intense competition from other manufacturers of thin film PV modules and other companies in the solar energy industry.
The solar energy and renewable energy industries are both highly competitive and continually evolving as participants strive to distinguish themselves within their markets and compete with the larger electric power industry. We believe that our main sources of competition are other thin film PV manufacturers and companies developing other solar solutions, such as solar thermal and concentrated PV technologies.
Many of our existing and potential competitors have substantially greater financial, technical, manufacturing and other resources than we do. A competitor’s greater size provides them with a competitive advantage because they often can realize economies of scale and purchase certain raw materials at lower prices. Many of our competitors also have greater brand name recognition, established distribution networks and large customer bases. In addition, many of our competitors have well-established relationships with our current and potential partners and distributors and have extensive knowledge of our target markets. As a result of their greater size, these competitors may be able to devote more resources to the research, development, promotion and sale of their products or respond more quickly to evolving industry standards and changes in market conditions than we can. Our failure to adapt to changing market conditions and to compete successfully with existing or future competitors could materially and adversely affect our business, results of operations and financial condition.
Problems with product quality or performance may cause us to incur warranty expenses, damage our market reputation and prevent us from maintaining or increasing our market share.
If our products fail to perform as expected while under warranty, or if we are unable to support the warranties, sales of our products may be adversely affected or our costs may increase, and our business, results of operations and financial condition could be materially and adversely affected.

We may also be subject to warranty or product liability claims against us that are not covered by insurance or are in excess of our available insurance limits. In addition, quality issues can have various other ramifications, including delays in the recognition of revenue, loss of revenue, loss of future sales opportunities, increased costs associated with repairing or replacing products, and a negative impact on our goodwill and reputation. The possibility of future product failures could cause us to incur substantial expenses to repair or replace defective products. Furthermore, widespread product failures may damage our market reputation and reduce our market share and cause sales to decline.
The interests of our largest stockholder, TFG Radiant, may conflict with our interests or your interests now or in the future.
TFG Radiant currently owns approximately 31% of our common stock. In addition, should TFG Radiant exercise its option to acquire more shares of common stock, we expect that it would hold over 42% of our voting stock. As a result of its large holding of our shares, TFG Radiant may have the ability to prevent any transaction that requires the approval of stockholders regardless of whether other stockholders believe that any such transaction is in their own best interests, with the exception of certain agreements TFG Radiant has made pursuant to the Amended and Restated Stockholders Agreement. TFG Radiant also has certain registration rights that could impact shareholders. Additionally, TFG Radiant currently holds two seats on our Board of Directors, which affords TFG Radiant greater control and influence over matters affecting our business.

In addition, on February 1, 2012, Mr. Victor Lee was appointed by our Board as our President and Chief Executive Officer. Mr. Lee is the managing director of Tertius Financial Group Pte Ltd, the joint venture partner with Radiant Group in TFG Radiant.
TFG Radiant may from time to time acquire and hold interests in businesses that compete directly or indirectly with us. TFG Radiant also may pursue opportunities (including by acquisition) that may be adverse to, or be in direct or indirect competition with us. Additionally, our potential customers may be competitors of TFG Radiant and our interests in selling to those customers could be divergent from TFG Radiant’s competitive interests. So long as TFG Radiant continues to own a significant amount of the outstanding shares of our common stock and Mr. Lee is President and Chief Executive Officer, TFG Radiant may be able to strongly influence or effectively control our decisions.

12

Table of Contents

Currency translation risk may negatively affect our net sales, cost of equipment, cost of sales, gross margin or profitability and could result in exchange losses.
Although our reporting currency is the U.S. dollar, we may conduct business and incur costs in the local currencies of other countries in which we operate, make sales or buy equipment or materials. As a result, we are subject to currency translation risk. Our future contracts and obligations may be exposed to fluctuations in currency exchange rates; and, as a result, our capital expenditures or other costs may exceed what we have budgeted. Further, changes in exchange rates between foreign currencies and the U.S. dollar could affect our net sales and cost of sales and could result in exchange losses. We cannot accurately predict future exchange rates or the overall impact of future exchange rate fluctuations on our business, results of operations and financial condition.
A significant increase in the price of our raw materials could lead to higher overall costs of production, which would negatively affect our planned product margins, or make our products uncompetitive in the PV market.
Our raw materials include high temperature plastics and various metals. Significant increases in the costs of these raw materials may impact our ability to compete in our target markets at a price sufficient to produce a profit.
Our intellectual property rights or our means of enforcing those rights may be inadequate to protect our business, which may result in the unauthorized use of our products or reduced sales or otherwise reduce our ability to compete.
Our business and competitive position depends upon our ability to protect our intellectual property rights and proprietary technology, including any PV modules that we develop. We attempt to protect our intellectual property rights, primarily in the United States, through a combination of patent, trade secret and other intellectual property laws, as well as licensing agreements and third party nondisclosure and assignment agreements. Because of the differences in foreign patent and other laws concerning intellectual property rights, our intellectual property rights may not receive the same degree of protection in foreign countries as they would in the United States. Our failure to obtain or maintain adequate protection of our intellectual property rights for any reason could have a material adverse effect on our business, results of operations and financial condition. Further, any patents issued in connection with our efforts to develop new technology for PV modules may not be broad enough to protect all of the potential uses of our technology.
We also rely on unpatented proprietary technology. It is possible that others will independently develop the same or similar technology or otherwise obtain access to our unpatented technology. To protect our trade secrets and other proprietary information, we require our employees, consultants and advisors to execute proprietary information and invention assignment agreements when they begin working for us. We cannot assure you that these agreements will provide meaningful protection of our trade secrets, know how or other proprietary information in the event of any unauthorized use, misappropriation or disclosure of any such trade secrets, know how or other proprietary information. Despite our efforts to protect this information, unauthorized parties may attempt to obtain and use information that we regard as proprietary. If we are unable to maintain the proprietary nature of our technologies, we could be materially adversely affected.
In addition, when others control the prosecution, maintenance and enforcement of certain important intellectual property, such as technology licensed to us, the protection and enforcement of the intellectual property rights may be outside of our control. If the entity that controls intellectual property rights that are licensed to us does not adequately protect those rights, our rights may be impaired, which may impact our ability to develop, market and commercialize our products. Further, if we breach the terms of any license agreement pursuant to which a third party licenses us intellectual property rights, our rights under that license may be affected and we may not be able to continue to use the licensed intellectual property rights, which could adversely affect our ability to develop, market and commercialize our products.
If third parties claim that we are infringing or misappropriating their intellectual property rights, we could be prohibited from selling our PV products, be required to obtain licenses from third parties or be forced to develop non-infringing alternatives, and we could be subject to substantial monetary damages and injunctive relief.
The PV industry is characterized by the existence of a large number of patents and frequent litigation based on allegations of patent infringement. We are aware of numerous issued patents and pending patent applications owned by third parties that may relate to current and future generations of solar energy. The owners of these patents may assert that the manufacture, use or sale of any of our products infringes one or more claims of their patents. Moreover, because patent applications can take many years to issue, there may be currently pending applications, unknown to us, which may later result in issued patents that materially and adversely affect our business. Third parties could also assert claims against us that we have infringed or misappropriated their intellectual property rights. Whether or not such claims are valid, we cannot be certain that we have not infringed the intellectual property rights of such third parties. Any infringement or misappropriation claim could result in significant costs or substantial damages to our business or an inability to manufacture, market or sell any of our PV modules that are found to infringe or misappropriate. Even if we were to prevail in any such action, the litigation could result in substantial cost and

13

Table of Contents

diversion of resources that could materially and adversely affect our business. The large number of patents, the rapid rate of new patent issuances, the complexities of the technology involved and uncertainty of litigation increase the risk of business assets and management’s attention being diverted to patent litigation. Even if obtaining a license were feasible, it could be costly and time consuming. We might be forced to obtain additional licenses from our existing licensors in the event that the scope of the intellectual property we have licensed is too narrow to cover our activities, or in the event that the licensor did not have sufficient rights to grant us the license(s) purported granted. Also, some of our licenses may restrict or limit our ability to grant sublicenses and/or assign rights under the licenses to third parties, which may limit our ability to pursue business opportunities.
Our future success depends on retaining our Chief Executive Officer and existing management team and hiring and assimilating new key employees and our inability to attract or retain key personnel would materially harm our business and results of operations.
Our success depends on the continuing efforts and abilities of our executive officers, including Mr. Victor Lee, our President and Chief Executive Officer, our other executive officers, and key technical personnel. Our future success also will depend on our ability to attract and retain highly skilled employees, including management, technical and sales personnel. The loss of any of our key personnel, the inability to attract, retain or assimilate key personnel in the future, or delays in hiring required personnel could materially harm our business, results of operations and financial condition.
Our PV modules contain limited amounts of cadmium sulfide, and claims of human exposure or future regulations could have a material adverse effect on our business, results of operations and financial condition.
Our PV modules contain limited amounts of cadmium sulfide, which is regulated as a hazardous material due to the adverse health effects that may arise from human exposure, and is banned in certain countries. We cannot assure you that human or environmental exposure to cadmium sulfide used in our PV modules will not occur. Any such exposure could result in third party claims against us, damage to our reputation and heightened regulatory scrutiny of our PV modules. Future regulation relating to the use of cadmium in various products could force us to seek regulatory exemptions or impact the manufacture and sale of our PV modules and could require us to incur unforeseen environmental related costs. The occurrence of future events such as these could limit our ability to sell and distribute our PV modules, and could have a material adverse effect on our business, results of operations and financial condition.
Environmental obligations and liabilities could have a substantial negative impact on our financial condition, cash flows and profitability.
We are subject to a variety of federal, state, local and foreign laws and regulations relating to the protection of the environment, including those governing the use, handling, generation, processing, storage, transportation and disposal of, or human exposure to, hazardous and toxic materials (such as the cadmium used in our products), the discharge of pollutants into the air and water, and occupational health and safety. We are also subject to environmental laws which allow regulatory authorities to compel, or seek reimbursement for, cleanup of environmental contamination at sites now or formerly owned or operated by us and at facilities where our waste is or has been disposed. We may incur significant costs and capital expenditures in complying with these laws and regulations. In addition, violations of, or liabilities under, environmental laws or permits may result in restrictions being imposed on our operating activities or in our being subjected to substantial fines, penalties, criminal proceedings, third party property damage or personal injury claims, cleanup costs or other costs. Also, future developments such as more aggressive enforcement policies, the implementation of new, more stringent laws and regulations, or the discovery of presently unknown environmental conditions or non compliance may require expenditures that could have a material adverse effect on our business, results of operations and financial condition. Further, greenhouse gas emissions have increasingly become the subject of international, national, state and local attention. Although future regulations could potentially lead to an increased use of alternative energy, there can be no guarantee that such future regulations will encourage solar technology. Given our limited history of operations, it is difficult to predict future environmental expenses.
We currently anticipate having substantial international operations that will subject us to a number of risks, including potential unfavorable political, regulatory, labor and tax conditions in foreign countries.
We expect to expand our operations abroad in the future and, as a result, we may be subject to the legal, political, social and regulatory requirements and economic conditions of foreign jurisdictions. Risks inherent to international operations, include, but are not limited to, the following:
difficulty in procuring supplies and supply contracts abroad;
difficulty in enforcing agreements in foreign legal systems;

14

Table of Contents

foreign countries imposing additional withholding taxes or otherwise taxing our foreign income, imposing tariffs or adopting other restrictions on foreign trade and investment, including currency exchange controls;
inability to obtain, maintain or enforce intellectual property rights;
risk of nationalization;
changes in general economic and political conditions in the countries in which we may operate, including changes in the government incentives we might rely on;
unexpected adverse changes in foreign laws or regulatory requirements, including those with respect to environmental protection, export duties and quotas;
difficulty with staffing and managing widespread operations;
trade barriers such as export requirements, tariffs, taxes and other restrictions and expenses, which could increase the prices of our products and make us less competitive in some countries; and
difficulty of and costs relating to compliance with the different commercial and legal requirements of the international markets in which we plan to offer and sell our PV products.
Our business in foreign markets will require us to respond to rapid changes in market conditions in these countries. Our overall success as an international business depends, in part, on our ability to succeed in differing legal, regulatory, economic, social and political conditions. If we are not able to develop and implement policies and strategies that are effective in each location where we will do business, then our business, results of operations and financial condition could be materially and adversely affected.
Existing regulations and policies and changes to these regulations and policies may present technical, regulatory and economic barriers to the purchase and use of PV products, which may significantly reduce demand for our PV products.
The market for electricity generation products is heavily influenced by foreign, U.S., state and local government regulations and policies concerning the electric utility industry, as well as policies promulgated by electric utilities. These regulations and policies often relate to electricity pricing and technical interconnection of customer owned electricity generation. In the United States and in a number of other countries, these regulations and policies have been modified in the past and may be modified again in the future. These regulations and policies could deter end user purchases of PV products and investment in the research and development of PV technology. For example, without a mandated regulatory exception for PV systems, utility customers are often charged interconnection or standby fees for putting distributed power generation on the electric utility grid. These fees could increase the cost to our end users of using PV systems and make them less desirable, thereby harming our business, prospects, results of operations and financial condition. In addition, electricity generated by PV systems mostly competes with expensive peak hour electricity, rather than the less expensive average price of electricity. Modifications to the peak hour pricing policies of utilities, such as to a flat rate, would require PV systems to achieve lower prices in order to compete with the price of electricity from other sources.
We anticipate that our PV modules and their use in installations will be subject to oversight and regulation in accordance with national and local ordinances relating to building codes, safety, environmental protection, utility interconnection and metering and related matters. It is difficult to track the requirements of individual states and design equipment to comply with the varying standards. Any new government regulations or utility policies pertaining to PV modules may result in significant additional expenses to us, our business partners and their customers and, as a result, could cause a significant reduction in demand for our PV modules.
Risks Relating to our Securities
As a public company we are subject to complex legal and accounting requirements that require us to incur substantial expenses, and our financial controls and procedures may not be sufficient to ensure timely and reliable reporting of financial information, which, as a public company, could materially harm our stock price and listing on the NASDAQ Global Market.
As a public company, we are subject to numerous legal and accounting requirements that do not apply to private companies. The cost of compliance with many of these requirements is substantial, not only in absolute terms but, more importantly, in relation to the overall scope of the operations of a small company. Failure to comply with these requirements can have numerous adverse consequences including, but not limited to, our inability to file required periodic reports on a timely basis, loss of market confidence, delisting of our securities and/or governmental or private actions against us. We cannot assure you

15

Table of Contents

that we will be able to comply with all of these requirements or that the cost of such compliance will not prove to be a substantial competitive disadvantage vis-à-vis our privately held and larger public competitors.
The Sarbanes-Oxley Act of 2002 (“Sarbanes-Oxley”) requires, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. In particular, we must perform system and process evaluation and testing of our internal control over financial reporting to allow management to report on the effectiveness of our internal control over financial reporting, as required by Section 404 of Sarbanes-Oxley. Our compliance with Section 404 of Sarbanes-Oxley will require that we incur substantial accounting expense and expend significant management efforts. The effectiveness of our controls and procedures may in the future be limited by a variety of factors, including:
faulty human judgment and simple errors, omissions or mistakes;
fraudulent action of an individual or collusion of two or more people;
inappropriate management override of procedures; and
the possibility that any enhancements to controls and procedures may still not be adequate to assure timely and accurate financial information.
If we are not able to comply with the requirements of Section 404 in a timely manner, or if we or our independent registered public accounting firm identifies deficiencies in our internal control over financial reporting that are deemed to be material weaknesses, we may be subject to NASDAQ delisting, investigations by the SEC and civil or criminal sanctions.
Our ability to successfully implement our business plan and comply with Section 404 requires us to be able to prepare timely and accurate financial statements. We expect that we will need to continue to improve existing, and implement new operational, financial and accounting systems, procedures and controls to manage our business effectively.
Any delay in the implementation of, or disruption in the transition to, new or enhanced systems, procedures or controls may cause our operations to suffer, and we may be unable to conclude that our internal control over financial reporting is effective as required under Section 404 of Sarbanes-Oxley. If we are unable to complete the required Section 404 assessment as to the adequacy of our internal control over financial reporting, if we fail to maintain or implement adequate controls, our ability to obtain additional financing could be impaired. In addition, investors could lose confidence in the reliability of our internal control over financial reporting and in the accuracy of our periodic reports filed under the Exchange Act. A lack of investor confidence in the reliability and accuracy of our public reporting could cause our stock price to decline.
The price of our common stock may continue to be volatile.
Our common stock is currently traded on the NASDAQ Global Market. The trading price of our common stock from time to time has fluctuated widely and may be subject to similar volatility in the future. For example, in the calendar year ended December 31, 2012, our common stock traded as low as $0.42 and as high as $1.94, and in 2011, traded as low as $0.36 and as high as $3.95. The trading price of our common stock in the future may be affected by a number of factors, including events described in these “Risk Factors.” In recent years, broad stock market indices, in general, and smaller capitalization and PV companies, in particular, have experienced substantial price fluctuations. In a volatile market, we may experience wide fluctuations in the market price of our common stock. These fluctuations may have a negative effect on the market price of our common stock regardless of our operating performance. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been instituted. A securities class action suit against us could result in substantial costs, potential liabilities and the diversion of management’s attention and resources, and could have a material adverse effect on our financial condition.

We are not currently in compliance with the minimum bid price rule of the NASDAQ Global Market and a delisting could limit the liquidity of our stock, increase its volatility and hinder our ability to raise capital.

Under the rules of the NASDAQ Global Market, listed companies are required to maintain a share bid price of at least $1.00 per share and if the closing share bid price stays below $1.00 for a period of 30 consecutive business days, then the listed company would have a cure period of at least 180 days for the purpose of regaining compliance with the $1.00 per share bid price minimum. As reported in our Current Report on Form 8-K filed on December 7, 2012, we received notice from the NASDAQ Global Market that we were not in compliance with the minimum bid price rule. If our share price does not sustain an increase sufficient for us to re-gain compliance during the relevant cure period ending on June 3, 2013 we may be subject to de-listing procedures. We are considering various options that will enable us to avoid de-listing should the cure period expire, including a transfer to the NASDAQ Capital Market in order to extend the time that we have to regain compliance, or by effecting a reverse stock split in order to increase our share price above the required $1.00 bid price.

16

Table of Contents


If our common stock is delisted by NASDAQ, our common stock may be eligible for quotation on an over-the-counter quotation system or on the pink sheets. Upon any such delisting, our common stock would become subject to the regulations of the SEC relating to the market for penny stocks. A penny stock is any equity security not traded on a national securities exchange that has a market price of less than $5.00 per share. The regulations applicable to penny stocks may severely affect the market liquidity for our common stock and could limit the ability of shareholders to sell securities in the secondary market. In such a case, an investor may find it more difficult to dispose of or obtain accurate quotations as to the market value of our common stock, and there can be no assurance that our common stock will be eligible for trading or quotation on any alternative exchanges or markets.

Delisting from NASDAQ could adversely affect our ability to raise additional financing through public or private sales of equity securities, would significantly affect the ability of investors to trade our securities and would negatively affect the value and liquidity of our common stock. Delisting could also have other negative results, including the potential loss of confidence by employees, the loss of institutional investor interest and fewer business development opportunities.

Future sales or the potential for future sales of our securities may cause the trading price of our common stock to decline and could impair our ability to raise capital through subsequent equity offerings.
Sales of a substantial number of shares of our common stock or other securities in the public markets, or the perception that these sales may occur, could cause the market price of our common stock or other securities to decline and could materially impair our ability to raise capital through the sale of additional securities.
Some provisions of our charter documents and Delaware law may have anti-takeover effects that could discourage an acquisition of us by others, even if an acquisition would be beneficial to our stockholders, and may prevent attempts by our stockholders to replace or remove our current management.
Provisions in our Certificate of Incorporation and Bylaws, as well as provisions of Delaware law, could make it more difficult for a third party to acquire us, or for a change in the composition of our Board of Directors (our “Board”) or management to occur, even if doing so would benefit our stockholders. These provisions include:
authorizing the issuance of “blank check” preferred stock, the terms of which may be established and shares of which may be issued without stockholder approval;
dividing our Board into three classes;
limiting the removal of directors by the stockholders; and
limiting the ability of stockholders to call a special meeting of stockholders.

In addition, we are subject to Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with an interested stockholder for a period of three years following the date on which the stockholder became an interested stockholder, unless such transactions are approved by our Board. This provision could have the effect of delaying or preventing a change of control, whether or not it is desired by or beneficial to our stockholders.
TFG Radiant, our largest stockholder, is exempt from the general prohibitions of Section 203 because the transaction by which it became an interested stockholder was approved by our Board. Because TFG Radiant has two representatives on our Board, it is less likely that a third party could become an interested stockholder without the consent of TFG Radiant.

Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
We own an approximately 138,000 square foot manufacturing and office facility in Thornton, Colorado.

Item 3. Legal Proceedings

On October 21, 2011, we were notified that a complaint (the “Lawsuit”) was filed by Jefferies against us in state court located in the County and State of New York.


17

Table of Contents

In December 2010, we and Jefferies entered into an engagement agreement (the “Fee Agreement”) pursuant to which Jefferies was hired to act as our financial advisor in relation to certain potential transactions. In the Lawsuit, Jefferies claims that it is entitled to receive an investment banking fee of $3 million (plus expense reimbursement of approximately $49,000) under the Fee Agreement in connection with the August 2011 investment and strategic alliance transaction (the “Financing”) between us and TFG Radiant.

At the August 12, 2011 closing of the Financing, we received aggregate proceeds of $7,360,000 from the sale to TFG Radiant of 6,400,000 shares of our common stock (the “Tranche 1 Shares”) at a price of $1.15 per share. TFG Radiant also received an option to purchase an additional 9,500,000 shares of Ascent stock (the “Tranche 2 Shares”) at a price of $1.55 per share. We have not received any proceeds from the option for the Tranche 2 Shares because such option is not currently exercisable.

We have paid Jefferies the fees we believe are owed under the Fee Agreement, which are a $100,000 retainer and approximately $49,000 of out-of-pocket expenses. The discovery process in the case is underway. Jefferies' motion for summary judgment has been denied. A trial date has not been set. We believe that the Financing is not a covered transaction under the Fee Agreement and, accordingly, that the Lawsuit is without merit. We intend to vigorously defend the Lawsuit.

This proceeding is subject to the uncertainties inherent in any litigation. It is subject to many uncertainties and to outcomes that are not predictable with assurance and that may not be known for an extended period of time. We record a liability in our financial statements for costs related to claims, including future legal costs, settlements and judgments, where we have assessed that a loss is probable and an amount can be reasonably estimated. It is not possible to predict the outcome for this legal proceeding. If the Lawsuit is determined adversely to Ascent, the costs associated with this proceeding could have a material adverse effect on our results of operations, financial position or cash flows of a future period.
Item 4. Mine Safety Disclosures
Not applicable.
PART II
Item 5. Market For Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Market Information
Our common stock is traded on the NASDAQ Global Market under the symbol “ASTI.” The following table sets forth the high and low sales price information per share for our common stock for the last two completed fiscal years.
Price Range of Common Stock 
 
 
High
 
Low
Fiscal 2011
 
 
 
 
First Quarter
 
$
3.95

 
$
2.50

Second Quarter
 
$
2.50

 
$
0.92

Third Quarter
 
$
1.50

 
$
0.60

Fourth Quarter
 
$
0.90

 
$
0.36

Fiscal 2012
 
 
 
 
First Quarter
 
$
1.06

 
$
0.42

Second Quarter
 
$
0.88

 
$
0.53

Third Quarter
 
$
1.94

 
$
0.79

Fourth Quarter
 
$
1.09

 
$
0.62

Holders
As of December 31, 2012, the number of record holders of our common stock was 27, and there were no holders of preferred stock. The vast majority of our publicly traded shares of common stock are held in street name, and we believe that the number of beneficial owners of our common stock was approximately 9,500 as of December 31, 2012.
Dividends

18

Table of Contents

The holders of common stock are entitled to receive such dividends as may be declared by our Board of Directors. During the years ended December 31, 2012 and 2011, we did not pay any dividends, and we do not expect to declare or pay any dividends in the foreseeable future. Payment of future dividends will be within the discretion of our Board of Directors and will depend on, among other factors, our retained earnings, capital requirements, and operating and financial condition.
Stock Performance Graph
The following graph compares the cumulative five-year return provided shareholders on Ascent Solar Technologies, Inc. Common Stock relative to the cumulative total returns of the Russell 2000 Index (market index that tracks small cap companies) and the First Trust NASDAQ Clean Edge Green Energy U.S. Index (industry index covering five major sub-sectors; Renewable Electricity Generation, Renewable Fuels, Energy Storage & Conversion, Energy Intelligence and Advanced Energy-Related Materials).

 
 
12/31/2007
 
12/31/2008
 
12/31/2009
 
12/31/2010
 
12/31/2011
 
12/31/2012
Ascent Solar
 
$
100.00

 
$
15.12

 
$
21.32

 
$
13.52

 
$
1.57

 
$
2.49

Russell 2000
 
$
100.00

 
$
65.20

 
$
81.64

 
$
102.30

 
$
96.72

 
$
110.88

NASDAQ Clean Edge Green Energy*
 
$
100.00

 
$
34.21

 
$
48.70

 
$
49.76

 
$
29.06

 
$
28.15

 Assumptions:
The graph covers the period from December 31, 2007 through December 31, 2012, the last trading day of our most recently completed fiscal year.
The graph assumes that $100 was invested in our common stock on December 31, 2007 at the closing price on that date of $24.86 per share, and in the Russell 2000 Index and the NASDAQ Clean Edge Energy Index, and that all dividends, if any, were reinvested. No cash dividends have been declared or paid on our common stock.

19

Table of Contents

Stockholder returns over the indicated period should not be considered indicative of future stockholder returns.
Item 6. Selected Financial Data
The following tables include selected financial data for each of our last five fiscal years. The statement of operations data for the years ended December 31, 2012, 2011 and 2010 and balance sheet data as of December 31, 2012 and 2011 have been derived from the audited financial statements appearing elsewhere in this report. The statement of operations data for the years ended December 31, 2009 and 2008 and the balance sheet data as of December 31, 2010, 2009 and 2008 have been derived from our audited financial statements appearing in our previous reports filed with the SEC. This data should be read in conjunction with the financial statements and notes therein, with the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 of this report and with the other financial data set forth elsewhere in this report. Our historical results of operations are not necessarily indicative of results of operations to be expected for future periods.
Statements of Operations Data
 
Year Ended December 31,
In thousands except per share data
 
2012
 
2011
 
2010
 
2009
 
2008
Revenue
 
$
1,197

 
$
3,950

 
$
2,481

 
$
1,464

 
$
1,500

Research and Development Expense
 
20,729

 
24,122

 
24,354

 
15,508

 
10,066

Selling, General and Administrative Expense
 
5,008

 
7,130

 
7,454

 
7,694

 
5,670

Impairment Loss
 
3,402

 
78,000

 
1,769

 

 

Loss from Operations
 
(27,941
)
 
(105,302
)
 
(31,096
)
 
(21,738
)
 
(14,236
)
Net Loss
 
(28,768
)
 
(105,744
)
 
(31,234
)
 
(20,923
)
 
(13,215
)
Basic and diluted net loss per share
 
$
(0.66
)
 
$
(3.02
)
 
$
(1.14
)
 
$
(0.93
)
 
$
(0.78
)
 
Balance Sheet Data
 
Year Ended December 31,
In thousands
 
2012
 
2011
 
2010
 
2009
 
2008
Cash and investments
 
$
12,621

 
$
23,915

 
$
44,790

 
$
60,506

 
$
87,350

Working capital
 
12,804

 
22,333

 
41,489

 
50,229

 
80,889

Total Assets
 
43,524

 
61,425

 
160,021

 
172,661

 
154,212

Long-Term Obligations
 
6,388

 
6,642

 
7,279

 
7,095

 
7,050

Stockholders’ Equity
 
$
34,227

 
$
50,003

 
$
146,566

 
$
154,315

 
$
139,618


Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion of our financial condition and results of operations should be read in conjunction with our audited financial statements and the notes to those financial statements appearing elsewhere in this Form 10-K. This discussion and analysis contains statements of a forward-looking nature relating to future events or our future financial performance. As a result of many factors, our actual results may differ materially from those anticipated in these forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements.
Overview
We are a development stage company formed to commercialize flexible PV modules using our proprietary technology. For the year ended December 31, 2012, we generated $1.2 million of revenue. Our revenue from product sales was $0.6 million and revenue from government research and development contracts was $0.6 million. As of December 31, 2012, we had an accumulated deficit of $211.8 million. Currently, we are producing consumer oriented products focusing on charging devices powered by or enhanced by our solar modules. Products in these markets are priced based on the overall product value proposition as compared with directly competitive products or substitute products rather than on a cost per watt basis, typically used in commodity solar markets. We continue to develop new consumer products and we have adjusted our utilization of our equipment to meet our near term forecast sales
In 2012 we accelerated our transition to a business model focusing on developing PV integrated consumer electronics. In June we launched our new line of consumer products under the EnerPlex™ brand, and introduced our first product, the Surfr™, a solar assisted case and charger for the Apple® iPhone® 4/4S smart phone featuring our ultra light CIGS thin film technology. The charger incorporates our ultra light and thin PV module into a sleek, protective iPhone 4/4S case, along with a thin battery.

20

Table of Contents

The charger adds minimal weight and size to an iPhone smart phone, yet provides supplemental charging when needed. In August we announced the launch of the second version of Surfr, a solar assisted charger for the Samsung® Galaxy S® III, which provides 85% additional battery life.
In December 2012, we launched the EnerPlex Kickr™ and EnerPlex Jumpr™ product series. The EnerPlex Kickr IV is an extremely portable, compact and durable solar charging device, approximately seven inches by seven inches when folded, and weighing only 316 grams, or less than half a pound. The Kickr IV provides 4.5 watt regulated power that can help charge phones, tablets, digital cameras, and other devices. The Kickr IV is ideal for outdoor activities such as camping, hiking and mountain climbing and daily city use. Complementing the Kickr IV is the Jumpr 4400 and the Jumpr 4800, rechargeable, portable battery packs providing from three to five complete charge cycles for a smart phone.
Currently, we are working to develop the iPhone® 5 version of the Surfr solar assisted charger. Our consumer products are available to customers through third party distributors and retailers and through our website at www.EnerPlex.biz, our retail website. In 2013, we plan to continue our expansion of distribution channels in the US and worldwide.
We continue to design and manufacture PV integrated consumer electronics as well as portable power applications for commercial and military users. Due to the high durability of the monolithic integration employed by our technology, the capability to customize modules into different form factors and the industry leading light weight and flexibility provided by our modules, we feel that the potential applications for our products are numerous.
Significant Trends, Uncertainties and Challenges
We believe that the significant trends, uncertainties and challenges that directly or indirectly affect our financial performance and results of operations include:
our ability to generate customer acceptance of and demand for our products;
successful ramping up of commercial production on the equipment installed;
our products are successfully and timely certified for use in our target markets;
successful operating of production tools to achieve the efficiencies, throughput and yield necessary to reach our cost targets;
the products we design are saleable at a price sufficient to generate profits;
our strategic alliance with TFG Radiant results in the design, manufacture and sale of sufficient products to achieve profitability;
our ability to raise sufficient capital to enable us to reach a level of sales sufficient to achieve profitability on terms favorable to us;
effective management of the planned ramp up of our operations;
our ability to successfully develop and maintain strategic relationships with key partners, including OEMs, system integrators and distributors, who deal directly with end users in our target markets;
our ability to maintain the listing of our common stock on the NASDAQ Global Market or Capital Market;
our ability to achieve projected operational performance and cost metrics;
our ability to enter into commercially viable licensing, joint venture, or other commercial arrangements; and
availability of raw materials.
Basis of Presentation: Our activities to date have consisted substantially of raising capital, research and development, and establishment of our production operation. Revenues to date have been generated primarily from our governmental research and development contracts and have not been significant. Our planned principal operations to commercialize flexible PV modules and PV integrated electronics have commenced, but have generated limited revenue to date. Accordingly, we are considered to be in the development stage and we have provided additional disclosure of inception to date activity in our Statements of Operations and Comprehensive Income (Loss), Statements of Stockholders' Equity and Statements of Cash Flows.
Significant Accounting Policies

21

Table of Contents

Related Party Transactions: We are party to several operating agreements, including a Joint Development Agreement, a Supply Agreement, a Contract Manufacturing Agreement, and a Services Agreement with TFG Radiant, which is also our largest shareholder. Accounting for transactions under these agreements is consistent with those defined in our Significant Accounting Policies. Additional disclosure of related party transactions is included in our financial statements and footnotes.
Revenue Recognition:
Product revenue - Product revenue is generated from commercial sales of flexible PV modules and PV integrated consumer electronics. Products are sold through our own website and through the use of online retailers and distributors. Revenue is recognized as modules are delivered and title has transferred to the customer. Estimated costs of returns and allowances and discounts are accrued as a reduction to sales when revenue is recognized. We are in the development stage and we generated product revenues of $578,000 for the year ended December 31, 2012.
Government contracts revenue - Revenue from governmental research and development contracts is generated under terms that are cost plus fee or firm fixed price. Revenue from cost plus fee contracts is recognized as costs are incurred on the basis of direct costs plus allowable indirect costs and an allocable portion of the fixed fee. Revenue from firm fixed price contracts is recognized under the percentage-of-completion method of accounting, with costs and estimated profits included in contract revenue as work is performed. If actual and estimated costs to complete a contract indicate a loss, provision is made currently for the loss anticipated on the contract.
Inventories: All inventories are stated at the lower of cost or market, with cost determined using the weighted average method. As a development stage entity with limited production, inventory values do not include labor and overhead allocations which would be typical in higher volume production environments, however, such differences are not significant.
Inventory balances are frequently evaluated to ensure that they do not exceed net realizable value. The computation for net realizable value takes into account many factors, including expected demand, product lifecycle and development plans, module efficiency, quality issues, obsolescence and others. Management's judgment is required to determine reserves for obsolete or excess inventory. If actual demand and market conditions are less favorable than those estimated by management, additional inventory write downs may be required. The majority of our inventory is raw materials which have a long life cycle; obsolescence is not a significant factor in their valuation. During the years ended December 31, 2012 and December 31, 2011, we recognized lower of cost or market adjustments on certain raw materials in the amounts of $1,022,000 and $609,000, respectively. These expenses are included within “Research and development” expense in the Statements of Operations and Comprehensive Income (Loss).
Impairment of Long-lived assets: We analyze our long-lived assets (property, plant and equipment) and definitive-lived intangible assets (patents) for impairment, both individually and as a group, whenever events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. Events that might cause impairment would include significant current period operating or cash flow losses associated with the use of a long-lived asset or group of assets combined with a history of such losses, significant changes in the manner of use of assets and significant negative industry or economic trends. An undiscounted cash flow analysis is calculated to determine if an impairment exists. If an impairment is determined to exist, any related loss is calculated using the difference between the fair value and the carrying value of the assets. During the years ended December 31, 2012, 2011 and 2010, we incurred impairments of our manufacturing facilities and equipment in the amounts of $3.4 million, $78.0 million and $1.8 million, respectively, based on estimates prepared by management, as well as, in certain cases, valuation analysis by an independent firm.
Research and Development Costs: Research and development costs are incurred during the process of researching and developing new products and enhancing our manufacturing processes and consist primarily of compensation and related costs for personnel, materials, supplies and equipment depreciation. We expense these costs as incurred until the resulting product has been completed and tested and is ready for commercial manufacturing. We also incur research and development expenses on federal government research and development contracts and expense as incurred.
Share-Based Compensation: We measure and recognize compensation expense for all share-based payment awards made to employees, officers, directors, and consultants based on estimated fair values. We estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service period in our statements of operations included herein. Share-based compensation is based on awards ultimately expected to vest and is reduced for estimated forfeitures. Forfeitures are estimated at the time of grant and revised, as necessary, in subsequent periods if actual forfeitures differ from those estimates. For purposes of determining estimated fair value of share-based payment awards on the date of grant, we use the Black-Scholes option-pricing model (“Black-Scholes Model”) for option awards. The Black-Scholes Model requires the input of highly subjective assumptions. Because our employee stock options may have characteristics significantly different from those of traded options, and because changes in the subjective input assumptions can materially affect the fair value estimate, in

22

Table of Contents

management’s opinion, the existing models may not provide a reliable single measure of the fair value of our employee stock options. Management will continue to assess the assumptions and methodologies used to calculate estimated fair value of share-based compensation. Circumstances may change and additional data may become available over time, which result in changes to these assumptions and methodologies, which could materially impact our fair value determination. We estimate the fair value of our restricted stock awards at our stock price on the grant date.
The accounting guidance for share-based compensation may be subject to further interpretation and refinement over time. There are significant differences among option valuation models, and this may result in a lack of comparability with other companies that use different models, methods and assumptions. If factors change and we employ different assumptions in the accounting for share-based compensation in future periods, or if we decide to use a different valuation model, the compensation expense that we record in the future may differ significantly from what we have recorded in the current period and could materially affect our loss from operations, net loss and net loss per share.
Use of Estimates: The preparation of financial statements in conformity with U.S. generally accepted accounting principles ("GAAP") requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
Results of Operations
Comparison of the Years Ended December 31, 2012 and 2011
Our activities to date have substantially consisted of raising capital, business and product development, research and development and the development of our production lines.
Revenues.    Our revenues were $1,197,000 for the year ended December 31, 2012 compared to $3,950,000 for the year ended December 31, 2011, a decrease of $2,753,000. Revenues for the years ended December 31, 2012 and December 31, 2011 included product sales of $578,000 and $538,000, respectively. Revenues earned on our government research and development contracts decreased by $2,793,000 for the year ended December 31, 2012 due to the winding down of several government contracts.
Research and development.    Research and development costs were $20,729,000 for the year ended December 31, 2012 compared to $24,122,000 for the year ended December 31, 2011, a decrease of $3,393,000. Research and development costs include the costs incurred for pre-production, production activities in our manufacturing facility and facility and equipment infrastructure costs. Research and development costs also include costs related to our governmental contracts. Costs related to pre-production and production activities decreased by $1,625,000. The pre-production cost decreases were comprised of depreciation and amortization of $1,329,000, materials and equipment related costs of $1,173,000 and personnel related costs of $164,000, offset by increases in consulting and contract services of $1,045,000. Governmental research and development costs decreased by $1,768,000. The governmental research and development cost decreases were comprised of consulting and contract services of $1,623,000 and personnel related costs of $132,000.
Selling, general and administrative.    Selling, general and administrative expenses were $5,008,000 for the year ended December 31, 2012 compared to $7,131,000 for the year ended December 31, 2011, a decrease of $2,123,000. This decrease is primarily the result of reductions in personnel related costs of $1,054,000, stock option expense of $650,000, general supplies expense of $281,000, public company expenses of $103,000 and consulting and contract services of $86,000, partially offset by an increase in insurance expense of $127,000.
Impairment loss. Impairment losses incurred as a result of write downs of Property, Plant and Equipment and Deposits on manufacturing equipment were $3,402,000 and $78,000,000 for years ended December 31, 2012 and 2011, respectively. The impairment loss incurred during 2012 was the result of certain manufacturing equipment no longer being utilized for its intended purpose. The significant impairment loss incurred in 2011 was the result of adverse changes in market conditions, particularly the decreases in current and expected average selling prices for PV modules.
Other Income/(Expense), net:
Interest expense.     Interest expense was $272,000 and $113,000 for the years ended December 31, 2012 and 2011, respectively. Interest costs of $177,300 and $352,000 were incurred and capitalized as property, plant and equipment for the years ended December 31, 2012 and 2011, respectively. Interest incurred relates to our CHFA loan utilized for our production facility expansion in Thornton, Colorado.

23

Table of Contents

Interest income.    Interest income was $29,000 for the year ended December 31, 2012 compared to $53,000 for the year ended December 31, 2011, a decrease of $24,000. Interest income represents interest on cash and short-term investments. The decrease is due to liquidation of investments and lower average cash balances.
Contract cancellation loss. Contract cancellation loss was $577,000 and $591,000 for the years ended December 31, 2012 and 2011, respectively. Contract cancellation losses are the result of changes in strategy and subsequent delivery cancellation of certain equipment.
Realized gain (loss) on forward contracts.    Realized gain (loss) on forward contracts includes gains and losses incurred when forward contracts mature. For the year ended December 31, 2011, we recorded a realized gain on forward contracts of $64,000 compared to $0 for the year ended December 31, 2012. The gain recorded for the year ended December 31, 2011 was generated from the exercise of foreign currency options held to hedge future equipment payments to be remitted in Yen.
Foreign currency transaction gain (loss). Foreign currency transaction gain (loss) is calculated on cash held in foreign currencies to reflect the current exchange rate. Foreign currency transaction loss was $5,000 for the year ended December 31, 2012 compared to foreign currency transaction gain of $146,000 for the year ended December 31, 2011, a net change of $151,000. The gains and losses are the result of changes in the exchange rate related to our deposits of foreign currencies.
Net Loss.    Our Net Loss was $28,768,000 for the year ended December 31, 2012, compared to a Net Loss of $105,744,000 for the year ended December 31, 2011, a decrease in Net Loss of $76,976,000. The decrease in Net Loss for the year ended December 31, 2012 can be summarized in variances in significant account activity as follows:
 
 
(Increase) decrease
in Net Loss
For the Year Ended
December 31, 2012
Compared to the Year Ended
December 31, 2011
Revenues
$
(2,753,000
)
Research and development costs
 
Manufacturing research and development
1,639,000

Government research and development
1,756,000

Non-cash stock based compensation
(2,000
)
Selling, general and administrative expenses
 
Corporate selling, general and administrative
1,472,000

Non-cash stock based compensation
650,000

Impairment loss
74,598,000

Interest expense
(159,000
)
Interest income
(24,000
)
Contract cancellation loss
14,000

Realized gain on investments

Realized gain (loss) on forward contracts
(64,000
)
Foreign currency transaction gain (loss)
(151,000
)
Increase to Net Loss
$
76,976,000

Comparison of the Years Ended December 31, 2011 and 2010
Revenues.    Our revenues were $3,950,000 for the year ended December 31, 2011 compared to $2,482,000 for the year ended December 31, 2010, an increase of $1,468,000. Revenues for the year ended December 31, 2011 and December 31, 2010 included product sales of $538,000 and $812,000, respectively. Revenues earned on our government research and development contracts increased by $1,742,000 for the year ended December 31, 2011 as a result of two new government contracts that were entered into and began generating revenue in June 2010.
Research and development.    Research and development costs were $24,122,000 for the year ended December 31, 2011 compared to $24,354,000 for the year ended December 31, 2010, a decrease of $232,000. Research and development costs include the costs incurred for pre-production, production activities in our manufacturing facility and facility and equipment

24

Table of Contents

infrastructure costs. Research and development costs also include costs related to our governmental contracts. Costs related to pre-production and production activities decreased by $1,555,000. The pre-production cost decreases were comprised of personnel related costs of $1,720,000, consulting and contract services of $1,014,000, facility related costs of $602,000 and stock option expense of $356,000, offset by increases in depreciation and amortization of $1,321,000 and materials and equipment related costs of $841,000. Governmental research and development costs increased by $1,323,000. The governmental research and development cost increases were comprised of consulting and contract service of $1,211,000 and personnel related costs of $179,000, offset by decreases in facilities related costs of $114,000.
Selling, general and administrative.    Selling, general and administrative expenses were $7,131,000 for the year ended December 31, 2011 compared to $7,454,000 for the year ended December 31, 2010, a decrease of $323,000. This decrease is primarily the result of reductions in stock option expense of $812,000, personnel related costs of $308,000 and depreciation and amortization expense of $268,000, offset by increases in facility related costs of $369,000, general supplies expenses of $258,000, legal expenses of $204,000, consulting and contract services of $164,000, public company expenses of $60,000 and marketing costs of $26,000.
Impairment loss. As a result of significant changes in market conditions, particularly the decreases in current and expected average selling prices for PV modules, an impairment charge was taken against Property, Plant and Equipment during the second quarter of 2011. The impairment loss incurred on the write down of Property, Plant and Equipment and Deposits on manufacturing equipment was $78,000,000 for year ended December 31, 2011 compared to $1,769,000 for year ended December 31, 2010.
Other Income/(Expense), net:
Interest expense.     Interest expense was $113,000 and $0 for the years ended December 31, 2011 and 2010, respectively. Interest costs of $352,000 and $480,000 were incurred and capitalized as property, plant and equipment for the years ended December 31, 2011 and 2010, respectively. Interest incurred relates to our CHFA loan utilized for our production facility expansion in Thornton, Colorado.
Interest income.    Interest income was $53,000 for the year ended December 31, 2011 compared to $42,000 for the year ended December 31, 2010, an increase of $11,000. Interest income represents interest on cash and short-term investments. Despite lower average cash balance, interest income increased due to slight improvements in interest rates in 2011 as compared to 2010.
Contract cancellation loss. Due to changes in our strategy, during the third quarter of 2011 we canceled delivery of certain equipment. As a result we recorded a loss of $591,000 for year ended December 31, 2011.
Realized gain (loss) on forward contracts.    Realized gain (loss) on forward contracts includes gains and losses incurred when forward contracts mature. For the year ended December 31, 2011, we recorded a realized gain on forward contracts of $64,000 compared to $0 for the year ended December 31, 2010. The gain recorded for the year ended December 31, 2011 was generated from the exercise of foreign currency options held to hedge future equipment payments to be remitted in Yen.
Foreign currency transaction gain (loss). Foreign currency transaction gain (loss) is calculated on cash held in foreign currencies to reflect the current exchange rate. Foreign currency transaction gain was $146,000 for the year ended December 31, 2011 compared to foreign currency transaction loss of $181,000 for the year ended December 31, 2010, a net change of $327,000. The decreases and increases are the result of changes in the exchange rate related to our deposits of foreign currencies.
Net Loss.    Our Net Loss was $105,744,000 for the year ended December 31, 2011 compared to a Net Loss of $31,234,000 for the year ended December 31, 2010, an increase in Net Loss of $74,510,000. The increase in Net Loss for the year ended December 31, 2011 can be summarized in variances in significant account activity as follows:

25

Table of Contents

 
(Increase) decrease
in Net Loss
For the Year Ended
December 31, 2011 Compared to the Year Ended
December 31, 2010
Revenues
$
1,468,000

Research and development costs
 
Manufacturing research and development
(1,296,000
)
Government research and development
1,199,000

Non-cash stock based compensation
329,000

Selling, general and administrative expenses
 
Corporate selling, general and administrative
(489,000
)
Non-cash stock based compensation
812,000

Impairment loss
(76,231,000
)
Interest expense
(113,000
)
Interest income
11,000

Contract cancellation loss
(591,000
)
Realized gain on investments

Realized gain (loss) on forward contracts
64,000

Foreign currency transaction gain (loss)
327,000

Increase to Net Loss
$
(74,510,000
)
Liquidity and Capital Resources
As of December 31, 2012, we had $12.6 million in cash and equivalents and working capital of $12.8 million. During the year ended December 31, 2012, we sold 1,972,181 shares of common stock under our At-The-Market facility for aggregate net proceeds of $1.9 million. In September 2012, we completed a firm commitment offering for 9,166,700 shares of common stock and received net proceeds of $10.2 million. We are in the development stage and are currently incurring significant losses from operations as we work toward commercialization. We made payments of $6.3 million in the year ended December 31, 2012 for property, plant and equipment.
We have commenced production at our manufacturing facility. We do not expect that sales revenue and cash flows will be sufficient to support operations and cash requirements until we have fully implemented our new consumer products strategy. Changes in the level of expected operating losses, the timing of planned capital expenditures or other factors may negatively impact cash flows and reduce current cash and investments faster than anticipated. During 2012 we used $17.7 million in cash for operations, or an average of $4.4 million per quarter. During the fourth quarter of 2012 we used $4.8 million in cash for operations. Absent any adjustments to expenses or significant additional financing, and without considering capital expenditures or significant increases in product sales at a positive margin, our cash could be depleted during the third quarter 2013. The major capital expenditures begun in 2008 were completed in 2012. In 2013 we expect to incur a base level of maintenance capital expenditures and relatively minor improvements to the existing asset base. Our primary significant long term obligation consists of a note payable of $6.6 million to a financial institution secured by a mortgage on our headquarters and manufacturing building in Thornton, Colorado. Total payments of $0.7 million, including principal and interest, will come due in 2013. Additional projected product revenues are not anticipated to result in a positive cash flow position for the year 2013 overall. As such, cash liquidity sufficient for the year ending December 31, 2013 will require additional financing, or a significant decrease in the operating expenditures, or some combination thereof. We continue to accelerate sales and marketing efforts related to our consumer products strategy through increased hiring. We have begun activities related to securing additional financing through strategic or financial investors, but there is no assurance that we will be able to raise additional capital on acceptable terms or at all. If our revenues do not increase rapidly, and/or additional financing is not obtained, we will be required to significantly curtail operations to reduce costs and/or sell assets. Such actions would likely have an adverse impact on our future operations.
For the year ended December 31, 2012, our cash used in operations was $17.7 million compared to $19.9 million for the year ended December 31, 2011, a decrease of $2.2 million. The net loss in 2012, net of the non-cash items; depreciation and amortization, stock based compensation and impairment loss, was $18.3 million, approximately equal to the comparable figure of $18.6 million in 2011. Relatively minor differences in balance sheet accounts in 2012 and 2011 account for the remaining decrease in cash used of $1.9 million.

26

Table of Contents

In 2012, expenditures for equipment purchases of $6.3 million combined with negative operating cash flows of $17.7 million were funded through proceeds from equity offerings of $12.1 million as well as the use of $12.6 million of cash and investments held at December 31, 2011.
On August 12, 2011, we completed a strategic alliance with TFG Radiant. As part of this strategic alliance, TFG Radiant acquired 6,400,000 shares of our common stock at a price of $1.15 per share or $7,360,000 in the aggregate. The closing price of our common stock on August 12, 2011 was $0.73. In addition, TFG Radiant received an option to acquire an additional 9,500,000 shares of our common stock at an exercise price of $1.55 per share. The option was approved by our shareholders on October 27, 2011. This approval eliminated certain registration rights which would have been otherwise available to TFG Radiant related to the 6,400,000 share purchase. TFG Radiant may not exercise this option unless and until TFG Radiant meets a specified milestone associated with the construction of the first East Asia FAB. This option expires on February 12, 2014.
In January 2012, TFG Radiant agreed to purchase 8,067,390 shares of the common stock owned by Norsk Hydro Produksjon AS ("Norsk Hydro") for $4 million, or approximately $0.50 per share. The TFG Radiant purchase closed on March 30, 2012. As of December 31, 2012, TFG Radiant's ownership was approximately 31% of our outstanding common stock.

In December 2011, we filed a “shelf” Registration Statement on Form S-3 with the SEC. With the shelf registration, we may from time to time sell common stock, preferred stock, warrants or some combination in one or more offerings for up to $25.0 million. The registration became effective February 14, 2012. This shelf registration replaces our prior shelf registration statement which, in accordance with SEC rules, expired in early 2012. As of December 31, 2012 approximately $13.3 million was unused on the shelf registration.

In January 2012, we entered into an At-The-Market Equity Offering Sales Agreement under which the we may issue and sell up to $5,000,000 of shares of our common stock from time to time. Sales of common stock, if any, will be made at market prices by any method that is deemed to be an “at the market” offering as defined in Rule 415 under the Securities Act, including sales made directly on the NASDAQ stock exchange and any other trading market for our common stock, and sales to or through a market maker other than on an exchange. The aggregate compensation payable to the sales agent shall be equal to 3% of the gross sales price of the shares sold. As of December 31, 2012, 1,972,181 shares had been sold under this facility with net proceeds of $1.9 million.

In September 2012, we entered into an underwriting agreement with Aegis Capital Corp., providing for the sale, in a firm commitment offering, of 9,166,700 shares of our common stock, par value $0.0001 per share, at a price to the public of $1.20 per share. The Offering closed on September 25, 2012. Net proceeds were $10.2 million after deducting the underwriting discount and offering expenses of approximately $837,000.
TFG Radiant owns approximately 31% of our outstanding common stock as of December 31, 2012. In February 2012 we announced the appointment of Victor Lee as President and Chief Executive Officer. Mr. Lee had served on our Board of Directors since November 2011 and is currently the managing director of Tertius Financial Group Pte Ltd, the joint venture partner with Radiant Group in TFG Radiant. In April 2012 we appointed the Chairman of TFG Radiant, Mr. Winston Xu (aka Xu Biao), as a member of our Board of Directors.
In June 2012, we entered into a supply agreement and a contract manufacturing agreement with TFG Radiant. Under the terms of the contract manufacturing agreement TFG Radiant will oversee certain aspects of the contract manufacturing process related to our EnerPlex line of consumer products. We will compensate TFG Radiant for acting as general contractor in the contract manufacturing process. Under the supply agreement TFG Radiant intends to distribute our consumer products in Asia. In December 2012, we entered into a consulting agreement with TGF Radiant for product design, product development and manufacturing coordination activities provided by TFG Radiant to us in connection with our new line of consumer electronics products. The services agreement has a one year term initially, and the services agreement may be terminated by either party upon 10 days prior written notice. During the year ended December 31, 2012 we made disbursements to TFG Radiant in the amount of $1,458,000. Included within these disbursements is $600,000 for consulting fees and $858,000 for finished goods received and deposits for work-in-process. During the year ended December 31, 2012 we recognized revenue in the amount of $405,000 for products sold to TFG Radiant under the supply agreement. As of December 31, 2012 we had $596,000 in receivables and deposits with TFG Radiant. Accounts receivable from TFG Radiant were collected in January 2012.

Contractual Obligations
The following table presents our contractual obligations as of December 31, 2012. Our long-term debt obligation is related to our building loan and includes both principal and interest. Our purchase obligations include orders for equipment, inventory and operating expenses.

27

Table of Contents

 
 
 
 
Payments Due by Year (in thousands)
Contractual Obligations
 
Total
 
Less Than
1 Year
 
1-3 Years
 
3-5 Years
 
More Than
5 Years
Long-term debt obligations
 
$
10,463

 
$
694

 
$
2,081

 
$
2,081

 
$
5,607

Operating lease obligations
 
3

 
3

 

 

 

Purchase obligations
 
1,362

 
1,362

 

 

 

Total
 
$
11,828

 
$
2,059

 
$
2,081

 
$
2,081

 
$
5,607

Off Balance Sheet Transactions
As of December 31, 2012, we did not have any off balance sheet arrangements as defined in Item 303(a)(4)(ii) of Regulation S-K.
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
Foreign Currency Exchange Risk
Historically, we have purchased manufacturing equipment internationally, which exposes us to foreign currency risk.
From time to time we enter into foreign currency fair value hedges utilizing forward contracts designed to match scheduled contractual payments to equipment suppliers. Our objective is to fix the dollar amount of our foreign currency denominated manufacturing equipment purchases at the time of order. Although our hedging activity is designed to fix the dollar amount to be expended, the asset purchased is recorded at the spot foreign currency rate in effect as of the date of the payment to the supplier. The difference between the spot rate and the forward rate has been reported as gain or loss on forward contract. We cannot accurately predict future exchange rates or the overall impact of future exchange rate fluctuations on our business, results of operations and financial condition. All forward contracts entered into by us have been settled on the contract settlement dates, the last of which was settled in December 2009. We held no forward contracts during the years ended December 31, 2012, 2011 and 2010.
Included in Restricted cash at December 31, 2011 is $1,427,053 related to €1,101,801 held in our bank account for future payments to equipment suppliers. This amount was released from restriction and remitted to equipment suppliers in January 2012. We hold no funds and have no future obligations denominated in foreign currencies as of December 31, 2012.
Although our reporting currency is the U.S. Dollar, we may conduct business and incur costs in the local currencies of other countries in which we may operate, make sales and buy materials. As a result, we are subject to currency translation risk. Further, changes in exchange rates between foreign currencies and the U.S. Dollar could affect our future net sales and cost of sales and could result in exchange losses.
Interest Rate Risk
Our exposure to market risks for changes in interest rates relates primarily to our cash equivalents and investment portfolio. As of December 31, 2012, our cash equivalents consisted only of operating and savings accounts held with financial institutions. From time to time we hold money market funds, investments in U.S. government securities and high quality corporate securities. The primary objective of our investment activities is to preserve principal and provide liquidity on demand, while at the same time maximizing the income we receive from our investments without significantly increasing risk. The direct risk to us associated with fluctuating interest rates is limited to our investment portfolio, and we do not believe that a change in interest rates will have a significant impact on our financial position, results of operations or cash flows.
Credit Risk
From time to time we hold certain financial and derivative instruments that potentially subject us to credit risk. These consist primarily of cash, cash equivalents, restricted cash, investments, and forward foreign currency option contracts. We are exposed to credit losses in the event of nonperformance by the counter parties to our financial and derivative instruments. We place cash, cash equivalents, investments and forward foreign currency option contracts with various high quality financial institutions, and exposure is limited at any one institution. We continuously evaluate the credit standing of our counter party financial institutions.
Item 8. Financial Statements and Supplementary Data
The Financial Statements and Supplementary Data required by this item are included in Part IV, Item 15(a)(1) and are presented beginning on Page F-1.
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

28

Table of Contents

None.
Item 9A. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted under the Securities Exchange Act of 1934, as amended (the “Exchange Act”) is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms. Our disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is accumulated and communicated to management as appropriate to allow timely decisions regarding required disclosures. Our management conducted an evaluation required by Rules 13a-15 and 15d-15 under the Exchange Act of the effectiveness of our disclosure controls and procedures as defined in Rules 13a-15 and 15d-15 under the Exchange Act as of December 31, 2012. Based on this evaluation, our management concluded that the design and operation of our disclosure controls and procedures were effective as of December 31, 2012.
Management’s Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Our system of internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America and includes those policies and procedures that:
pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;
provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and
provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.
Our management conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2012 based on the framework in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, our management concluded that our internal control over financial reporting was effective as of December 31, 2012. Our management reviewed the results of its assessment with the Audit Committee.
This annual report does not include an attestation report from our independent registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to Sarbanes-Oxley Rule 404(c).
Changes in Internal Control over Financial Reporting
There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) that occurred during the quarter ended December 31, 2012 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information
None.

PART III
Item 10. Directors, Executive Officers and Corporate Governance
Incorporated by reference from the definitive proxy statement for our 2013 annual meeting of stockholders, which will be filed no later than 120 days after the close of our fiscal year ended December 31, 2012.
Item 11. Executive Compensation

29

Table of Contents

Incorporated by reference from the definitive proxy statement for our 2013 annual meeting of stockholders, which will be filed no later than 120 days after the close of our fiscal year ended December 31, 2012.
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Incorporated by reference from the definitive proxy statement for our 2013 annual meeting of stockholders, which will be filed no later than 120 days after the close of our fiscal year ended December 31, 2012.
Securities Authorized for Issuance under Equity Compensation Plans
The following table sets forth information as of December 31, 2012 relating to all of our equity compensation plans:
 
 
Number of securities
to be issued upon
exercise of outstanding
options, warrants and
rights (1)
 
Weighted average
exercise price of
outstanding
options, warrants and
rights
 
Number of securities
remaining available
for future issuance
under equity
compensation plans
Equity compensation plans approved by security holders
 
1,219,651

 
$
2.54

 
2,985,225

 
 
 
 
 
 
 
(1)
This column does not include 48,000 restricted stock awards or units.
Item 13. Certain Relationships and Related Transactions, and Director Independence
Incorporated by reference from the definitive proxy statement for our 2013 annual meeting of stockholders, which will be filed no later than 120 days after the close of our fiscal year ended December 31, 2012.
Item 14. Principal Accounting Fees and Services
Incorporated by reference from the definitive proxy statement for our 2013 annual meeting of stockholders, which will be filed no later than 120 days after the close of our fiscal year ended December 31, 2012.
PART IV

Item 15. Exhibits and Financial Statement Schedules
(a) The following documents are filed as part of this Annual Report on Form 10-K:
(1)
Financial Statements—See Index to Financial Statements at Item 8 of the Annual Report on Form 10-K.
(2)
Financial Statement Schedules—Supplemental schedules are not provided because of the absence of conditions under which they are required or because the required information is given in the financial statements or notes thereto.
(3)
Exhibits: See Item 15(b) below.
(b) Exhibits: The exhibits listed on the accompanying Index to Exhibits on this Form 10-K are filed or incorporated into this Form 10-K by reference.



30

Table of Contents


ASCENT SOLAR TECHNOLOGIES, INC.
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on the 14th day of March, 2013.
 
ASCENT SOLAR TECHNOLOGIES, INC.
 
 
By:
 
/S/    VICTOR LEE
 
 
Lee Kong Hian (aka Victor Lee)
President and Chief Executive Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated.
 
 
 
 
 
Signature
  
Capacities
  
Date
 
 
 
 
 
/S/    VICTOR LEE
  
President & Chief Executive Officer and a Director
(Principal executive officer)
  
March 14, 2013
Lee Kong Hian (aka Victor Lee)
 
 
 
 
 
 
 
/S/    GARY GATCHELL
  
Chief Financial Officer (Principal financial and accounting officer)
  
March 14, 2013
Gary Gatchell
 
 
 
 
 
 
 
/S/    AMIT KUMAR
  
Chairman of the Board of Directors
  
March 14, 2013
Amit Kumar, Ph.D.
 
 
 
 
 
 
 
/S/    WINSTON XU
  
Director
  
March 14, 2013
Xu Biao (aka Winston Xu)
 
 
 
 
 
 
 
/S/    G. THOMAS MARSH
  
Director
  
March 14, 2013
G. Thomas Marsh
 
 
 
 
 
 
 
/S/    KIM J. HUNTLEY
  
Director
  
March 14, 2013
Kim J. Huntley
 
 







31

Table of Contents

Ascent Solar Technologies, Inc.
Index to Financial Statements


 
  
Page
 
 
 
 
 
 
 
  
 
 
 
  
 
 
 
  
 
 
 
  
 
 
 
  



32

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors
Ascent Solar Technologies, Inc.
Thornton, Colorado
We have audited the accompanying balance sheets of Ascent Solar Technologies, Inc. (a Development Stage Company) as of December 31, 2012 and 2011, and the related statements of operations and comprehensive income (loss), stockholders’ equity and cash flows for the years ended December 31, 2012, 2011 and 2010 and for the period from inception (October 18, 2005) through December 31, 2012. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purposes of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Ascent Solar Technologies, Inc. as of December 31, 2012 and 2011, and the results of its operations and its cash flows for the years ended December 31, 2012, 2011 and 2010 and for the period from inception (October 18, 2005) through December 31, 2012 in conformity with U.S. generally accepted accounting principles.
 
 
/s/    HEIN & ASSOCIATES LLP
 
Denver, Colorado
March 14, 2013



F-1

Table of Contents
ASCENT SOLAR TECHNOLOGIES, INC.
(A Development Stage Company)



BALANCE SHEETS

 
 
 
December 31,
2012
 
December 31,
2011
ASSETS
 
 
 
 
Current Assets:
 
 
 
 
Cash and cash equivalents
 
$
12,621,477

 
$
11,298,885

Investments
 

 
12,616,097

Trade receivables, net of allowance for doubtful accounts of $0 and $5,839, respectively
 
100,164

 
342,087

Related party receivables and deposits
 
596,339

 

Inventories
 
2,159,553

 
2,469,123

Prepaid expenses and other current assets
 
235,305

 
386,624

Total current assets
 
15,712,838

 
27,112,816

Property, Plant and Equipment:
 
39,979,013

 
36,897,531

Less accumulated depreciation and amortization
 
(12,725,298
)
 
(7,964,875
)
 
 
27,253,715

 
28,932,656

Other Assets:
 
 
 
 
Restricted cash
 

 
1,427,053

Deposits on manufacturing equipment
 

 
3,582,883

Patents, net of amortization of $48,150 and $28,248, respectively
 
500,879

 
308,785

Other non-current assets
 
56,563

 
60,312

 
 
557,442

 
5,379,033

Total Assets
 
$
43,523,995

 
$
61,424,505

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
 
Current Liabilities:
 
 
 
 
Accounts payable
 
$
855,373

 
$
658,834

Accrued expenses
 
1,565,091

 
1,846,997

Accrued property, plant and equipment
 
223,544

 
1,626,317

Current portion of long-term debt
 
264,935

 
648,059

Total current liabilities
 
2,908,943

 
4,780,207

Long-Term Debt
 
6,350,135

 
6,615,070

Accrued Warranty Liability
 
38,187

 
26,660

Commitments and Contingencies (Notes 4 & 17)
 

 

Stockholders’ Equity:
 
 
 
 
Preferred stock, $0.0001 par value, 25,000,000 shares authorized, no shares outstanding
 

 

Common stock, $0.0001 par value, 125,000,000 shares authorized; 51,143,906 and 39,345,459 shares issued and outstanding, respectively
 
5,114

 
3,935

Additional paid in capital
 
245,996,950

 
233,004,550

Deficit accumulated during the development stage
 
(211,775,334
)
 
(183,006,936
)
Accumulated other comprehensive income (loss)
 

 
1,019

Total stockholders’ equity
 
34,226,730

 
50,002,568

Total Liabilities and Stockholders’ Equity
 
$
43,523,995

 
$
61,424,505

The accompanying notes are an integral part of these financial statements.

F-2

Table of Contents
ASCENT SOLAR TECHNOLOGIES, INC.
(A Development Stage Company)


STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)
 
 
 
 
 
For the Period from Inception (October 18, 2005) Through December 31, 2012
 
 
For the Years Ended December 31,
 
 
 
2012
 
2011
 
2010
 
Revenues
 
 
 
 
 
 
 
 
Products *
 
$
578,352

 
$
538,005

 
$
811,906

 
$
1,928,263

Government contracts
 
618,811

 
3,411,906

 
1,669,583

 
9,667,049

Total Revenues
 
1,197,163

 
3,949,911

 
2,481,489

 
11,595,312

Costs and Expenses
 
 
 
 
 
 
 
 
Research and development
 
20,728,553

 
24,121,766

 
24,354,224

 
100,414,236

Selling, general and administrative
 
5,008,388

 
7,130,530

 
7,453,830

 
40,830,418

Impairment loss
 
3,401,610

 
78,000,000

 
1,769,480

 
83,171,090

Total Costs and Expenses
 
29,138,551

 
109,252,296

 
33,577,534

 
224,415,744

Loss from Operations
 
(27,941,388
)
 
(105,302,385
)
 
(31,096,045
)
 
(212,820,432
)
Other Income/(Expense), net
 
(827,010
)
 
(441,475
)
 
(137,673
)
 
1,045,098

Net Loss
 
$
(28,768,398
)
 
$
(105,743,860
)
 
$
(31,233,718
)
 
$
(211,775,334
)
Other Comprehensive Income (Loss)
 
 
 
 
 
 
 
 
Unrealized gain (loss) on investments
 
(1,019
)
 
1,245

 
2,786

 

Comprehensive Loss
 
$
(28,769,417
)
 
$
(105,742,615
)
 
$
(31,230,932
)
 
$
(211,775,334
)
 
 
 
 
 
 
 
 
 
Net Loss Per Share (Basic and diluted)
 
$
(0.66
)
 
$
(3.02
)
 
$
(1.14
)
 
 
Weighted Average Common Shares Outstanding (Basic and diluted)
 
43,850,322

 
34,985,914

 
27,506,007

 
 
* Includes related party revenue of $404,680 for the year ended December 31, 2012. See Note 16.

The accompanying notes are an integral part of these financial statements.

F-3

Table of Contents
ASCENT SOLAR TECHNOLOGIES, INC.
(A Development Stage Company)


STATEMENTS OF STOCKHOLDERS’ EQUITY
For the Period from Inception (October 18, 2005) through December 31, 2012
 
 
Common Stock
 
Preferred Stock
 
Additional
Paid-In
Capital
 
Accumulated
Deficit
 
Accumulated
Other
Comprehensive
Income
 
Total
Stockholders’
Equity
 
 
Shares
 
Amount
 
Shares
 
Amount
 
Balance at inception, 
October 18, 2005
 

 
$

 

 
$

 
$

 
$

 
$

 
$

Proceeds from sale of  common stock (11/05 @ $.04 per share)
 
972,000

 
97

 

 

 
38,783

 

 

 
38,880

Founders stock
 

 

 

 

 
933,120

 

 

 
933,120

Stock based compensation
 

 

 

 

 
26,004

 

 

 
26,004

Net loss
 

 

 

 

 

 
(1,207,234
)
 

 
(1,207,234
)
Balance, December 31, 2005
 
972,000

 
$
97

 

 
$

 
$
997,907

 
$
(1,207,234
)
 
$

 
$
(209,230
)
Transfer of assets at historical cost (1/06 @ $0.03 per share)
 
1,028,000

 
103

 

 

 
31,097

 

 

 
31,200

Proceeds from IPO (7/06 @ $5.50 per unit)
 
3,000,000

 
300

 

 

 
16,499,700

 

 

 
16,500,000

IPO costs
 

 

 

 

 
(2,392,071
)
 

 

 
(2,392,071
)
Stock issued to bridge loan lenders (7/06 @ $2.75 per share)
 
290,894

 
29

 

 

 
799,971

 

 

 
800,000

Exercise of stock options (9/06 & 12/06 @ $0.10 per share)
 
31,200

 
3

 

 

 
3,117

 

 

 
3,120

Stock based compensation
 

 

 

 

 
348,943

 

 

 
348,943

Net loss
 

 

 

 

 

 
(4,180,912
)
 

 
(4,180,912
)
Balance, December 31, 2006
 
5,322,094

 
$
532

 

 
$

 
$
16,288,664

 
$
(5,388,146
)
 
$

 
$
10,901,050

Exercise of stock options (1/07 -12/07 @ $.10) (7/07 - 12/07 @ $4.25) (9/07 - 12/07 @ $2.51 -$2.76)
 
169,963

 
17

 

 

 
346,417

 

 

 
346,434

Conversion of Class A public warrants at $6.60
 
3,098,382

 
310

 

 

 
20,449,011

 

 

 
20,449,321

Redemption of Class A public warrants at $0.25 per share
 

 

 

 

 
(48,128
)
 

 

 
(48,128
)
Conversion of Class B public warrants at $11.00 per share
 
11,000

 
1

 

 

 
120,999

 

 

 
121,000

Proceeds from private placement: Common stock (3/07 @ $5.77 and 8/07 @ $7.198)
 
2,534,462

 
254

 

 

 
15,962,003

 

 

 
15,962,257

Proceeds from private placement: Class B public warrants (8/07 @ $1.91)
 

 

 

 

 
3,754,468

 

 

 
3,754,468

Private placement costs
 

 

 

 

 
(75,807
)
 

 

 
(75,807
)
Exercise of representative’s warrants (9/07 - 11/07 @ $6.60 per unit)
 
300,000

 
30

 

 

 
1,979,970

 

 

 
1,980,000

Stock based compensation
 

 

 

 

 
1,734,879

 

 

 
1,734,879

Net loss
 

 

 

 

 

 
(6,503,419
)
 

 
(6,503,419
)
Balance, December 31, 2007
 
11,435,901

 
$
1,144

 

 
$

 
$
60,512,476

 
$
(11,891,565
)
 
$

 
$
48,622,055

The accompanying notes are an integral part of these financial statements.

F-4

Table of Contents
ASCENT SOLAR TECHNOLOGIES, INC.
(A Development Stage Company)


STATEMENTS OF STOCKHOLDERS’ EQUITY
(Continued)
For the Period from Inception (October 18, 2005) through December 31, 2012
 
 
Common Stock
 
Preferred Stock
 
Additional
Paid-In
Capital
 
Accumulated
Deficit
 
Accumulated
Other
Comprehensive
Income
 
Total
Stockholders’
Equity
 
 
Shares
 
Amount
 
Shares
 
Amount
 
Balance, 
December 31, 2007
 
11,435,901

 
$
1,144

 

 
$

 
$
60,512,476

 
$
(11,891,565
)
 
$

 
$
48,622,055

Components of  comprehensive loss
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Unrealized gain on investments
 

 

 

 

 

 

 
331,068

 
331,068

Net loss
 

 

 

 

 

 
(13,215,076
)
 

 
(13,215,076
)
Total comprehensive loss
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(12,884,008
)
Exercise of stock options (1/08 - 12/08 @ $0.10, $2.73, $2.90 & $4.25)
 
133,137

 
13

 

 

 
120,520

 

 

 
120,533

Conversion of Class B public warrants at $11.00 per share
 
98,800

 
10

 

 

 
1,086,790

 

 

 
1,086,800

Proceeds from private placement: Common stock (3/08 @ $9.262 & 10/08 @$6.176)
 
4,763,698

 
476

 

 

 
36,647,217

 

 

 
36,647,693

Proceeds from private placement: Class B public warrants (3/08 @ $3.954)
 

 

 

 

 
6,681,884

 

 

 
6,681,884

Exercise of representative’s warrants (1/08 @ $6.60 per unit)
 
75,000

 
8

 

 

 
494,992

 

 

 
495,000

Proceeds from shareholder under Section 16(b)
 

 

 

 

 
148,109

 

 

 
148,109

Proceeds from secondary public offering (5/08 @ $14.00)
 
4,370,000

 
437

 

 

 
61,179,563

 

 

 
61,180,000

Costs of secondary public offering
 

 

 

 

 
(4,361,358
)
 

 

 
(4,361,358
)
Issuance of Restricted Stock
 
69,846

 
7

 

 

 
(7
)
 

 

 

Stock based compensation
 

 

 

 

 
1,881,399

 

 

 
1,881,399

Balance, December 31, 2008
 
20,946,382

 
$
2,095

 

 
$

 
$
164,391,585

 
$
(25,106,641
)
 
$
331,068

 
$
139,618,107

Components of comprehensive loss
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Unrealized loss on investments
 

 

 

 

 

 

 
(334,080
)
 
(334,080
)
Net loss
 

 

 

 

 

 
(20,922,717
)
 

 
(20,922,717
)
Total comprehensive loss
 

 

 

 

 

 

 

 
(21,256,797
)
Exercise of stock options (1/09 - 12/09 @ $0.10, $2.76 & $4.25)
 
105,169

 
10

 

 

 
339,606

 

 

 
339,616

Proceeds from private placement: Common stock (10/09 @ $6.50)
 
769,230

 
77

 

 

 
4,999,918

 

 

 
4,999,995

Proceeds from public offering (10/09 @ $6.50)
 
4,615,385

 
461

 

 

 
29,999,542

 

 

 
30,000,003

Costs of public offering
 

 

 

 

 
(2,062,866
)
 

 

 
(2,062,866
)
Issuance of Restricted Stock
 
147,679

 
15

 

 

 
(15
)
 

 

 

Stock based compensation
 

 

 

 

 
2,676,957

 

 

 
2,676,957

Balance, December 31, 2009
 
26,583,845

 
$
2,658

 

 
$

 
$
200,344,727

 
$
(46,029,358
)
 
$
(3,012
)
 
$
154,315,015


The accompanying notes are an integral part of these financial statements.

F-5

Table of Contents
ASCENT SOLAR TECHNOLOGIES, INC.
(A Development Stage Company)


STATEMENTS OF STOCKHOLDERS’ EQUITY
(Continued)
For the Period from Inception (October 18, 2005) through December 31, 2012

 
 
Common Stock
 
Preferred Stock
 
Additional
Paid-In
Capital
 
Accumulated
Deficit
 
Accumulated
Other
Comprehensive
Income
 
Total
Stockholders’
Equity
 
 
Shares
 
Amount
 
Shares
 
Amount
 
Balance, December 31, 2009
 
26,583,845

 
$
2,658

 

 
$

 
$
200,344,727

 
$
(46,029,358
)
 
$
(3,012
)
 
$
154,315,015

Components of comprehensive loss
 

 

 

 

 

 

 

 
 
Unrealized loss on investments
 

 

 

 

 

 

 
2,786

 
2,786

Net loss
 

 

 

 

 

 
(31,233,718
)
 

 
(31,233,718
)
Total comprehensive loss
 

 

 

 

 

 

 

 
(31,230,932
)
Proceeds from public offering (11/10 @ $4.15)
 
5,250,000

 
525

 

 

 
21,786,975

 

 

 
21,787,500

Costs of public offering
 

 

 

 

 
(1,409,937
)
 

 

 
(1,409,937
)
Exercise of stock options (1/10 - 12/10 @ $0.10, $2.90, $2.73, $2.76 & $3.17)
 
161,330

 
16

 

 

 
390,985

 

 

 
391,001

Issuance of Restricted Stock
 
270,412

 
27

 

 

 
(27
)
 

 

 

Stock based compensation
 

 

 

 

 
2,713,468

 

 

 
2,713,468

Balance, December 31, 2010
 
32,265,587

 
$
3,226

 

 
$

 
$
223,826,191

 
$
(77,263,076
)
 
$
(226
)
 
$
146,566,115

Components of comprehensive loss
 

 

 

 

 

 

 

 
 
Unrealized loss on investments
 

 

 

 

 

 

 
1,245

 
1,245

Net loss
 

 

 

 

 

 
(105,743,860
)
 

 
(105,743,860
)
Total comprehensive loss