smtx20171231_10k.htm
 


UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549  

FORM 10-K

 



 

(Mark One)

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2017 

or 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 For the transition period from              to             

Commission File Number 0-31051  


SMTC CORPORATION

(Exact name of registrant as specified in its charter)  

Delaware

(State or other jurisdiction of incorporation or organization)  

98-0197680

(IRS Employer Identification Number)  

7050 WOODBINE AVE, Suite 300.

MARKHAM, ONTARIO, CANADA

(Address of Principal Executive Offices)  

L3R 4G8

(Zip Code)  

Registrant’s telephone number, including area code: 905-479-1810

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common stock, par value $0.01 per share

 

NASDAQ Global Market

 

Securities registered pursuant to Section 12(g) of the Act: NONE  

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☐    No  ☒  

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐    No  ☒  

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐  

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   Yes  ☒    No  ☐ 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☒  

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.  

 

Large accelerated filer  

Accelerated filer

Non-accelerated filer

Smaller reporting company

 

 Emerging growth company    ☐        

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ☐    No  ☒  

 

The aggregate market value of common stock of the registrant held by non-affiliates of the registrant was approximately $16.3 million on July 2, 2017 (the last day of the registrant’s most recently completed second fiscal quarter). For purposes of the foregoing sentence, the term “affiliate” includes each director and executive officer of the registrant and each holder of more than 10% of the registrant’s common stock. This determination of affiliate status is not necessarily a conclusive determination for other purposes. The computation of the aggregate market value of the registrants common stock is based upon the closing price of the common stock as reported on The NASDAQ Global Market on June 30, 2017 (the last trading day of the most recently completed second fiscal quarter).  

 

As of March 2, 2018, the registrant had 17,092,373 shares of common stock, par value $0.01 per share outstanding.  

 

 

Documents Incorporated By Reference: None.

 



 

1

 

 

 TABLE OF CONTENTS

 

Annual Report on Form 10-K for the year ended December 31, 2017

 

 

PART I

 

3

Item 1.

Business

3

Item 1A.

Risk Factors

14

Item 2.

Properties

23

Item 3.

Legal Proceedings

23

Item 4.

Mine Safety Disclosures

23

 

   

PART II

 

24

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

24

Item 6.

Selected Financial Data

27

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

29

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

43

Item 8.

Financial Statements and Supplementary Data

44

Item 9.

Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

45

Item 9A.

Controls and Procedures

45

Item 9B.

Other Information

46

 

   

PART III

 

47

Item 10.

Directors, Executive Officers and Corporate Governance

47

Item 11.

Executive Compensation

52

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

58

Item 13.

Certain Relationships and Related Transactions, and Director Independence

60

Item 14.

Principal Accounting Fees and Services

61

 

   

PART IV

 

62

Item 15.

Exhibits, Financial Statement Schedules

62

Item 16

Form 10-K Summary

62

SIGNATURES

63

 

2

 

 

 

PART I

 

Unless the context otherwise requires, in this Annual Report on Form 10-K (the “Form 10-K”) where we say “we”, “us”, “our”, the “Company” or “SMTC,” we mean SMTC Corporation and its subsidiaries, as applicable. Where we refer to the “industry,” we mean the electronics manufacturing services industry. Unless otherwise noted or the context otherwise requires, all references to years in this report are to fiscal years.

 

This Form 10-K and other communications made by us contain forward–looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934. The forward-looking statements in this Form10-K regarding the electronics manufacturing services industry, our expectations regarding our future performance, liquidity and capital resources and other non-historical statements include numerous risks and uncertainties, some of which are as described in the “Risk Factors” section in this Form 10-K. Statements using words such as “could”, “expects”, “may”, “anticipates”, “believes”, “intends”, “estimates”, “plans”, “envisions”, “seeks” and other similar language are considered forward looking statements under applicable securities laws. These statements are based on our current expectations, estimates, forecasts and projections about the operating environment, economies and markets in which we operate. These statements are subject to important assumptions, risks and uncertainties, which are difficult to predict and the actual outcome may be materially different. Except as required by applicable law, we undertake no intention or obligation to update these forward-looking statements after the date of this quarterly report, even though our situation may change in the future. All forward-looking statements attributable to us are expressly qualified by these cautionary statements.

 

Item 1.

Business

 

Overview

 

SMTC is a provider of end-to-end electronics manufacturing services (“EMS”), including product design and engineering services, printed circuit board assembly (“PCBA”), production, enclosure, cable assembly, precision metal fabrication, systems integration and comprehensive testing services, configuration to order (“CTO”), build to order (“BTO”) and direct order fulfillment (“DOF”). SMTC has manufacturing and other facilities in the United States, Canada, Mexico, and China, with approximately 1,171 employees as of December 31, 2017 of which 1,110 are full-time employees. SMTC’s services extend over the entire electronic product life cycle from new product development and new product introduction (“NPI”) through to growth, maturity and end of life phases. SMTC offers fully integrated contract manufacturing services to global original equipment manufacturers (“OEMs”), and technology companies primarily within the industrial, networking and communications, power and energy and medical market sectors.

 

SMTC has customer relationships with industry leading OEMs. We developed these relationships by capitalizing on the continuing trend of OEMs to outsource non-core manufacturing services, to consolidate their supplier base and to form long-term strategic partnerships with select high quality EMS providers. We work closely with and are highly responsive to our customers throughout the design, manufacturing and distribution process, providing value-added services. We seek to grow our business through the addition of new high quality customers, the expansion of our share of business with existing customers, and participating in the growth of existing customers.

 

We believe that fundamental to the key benefits we offer is our strategic approach in working with customers premised upon gaining insight into their business and bringing innovative solutions to enhance their competitiveness, time to market and profitability. SMTC seeks to lower total cost of ownership, improve product quality and reliability, accelerate new products to market, improve service and DOF, reduce working capital requirements and capital expenditures, all of which results in improvement of our customers’ overall margins and end customer satisfaction.

 

Our Fremont, California facility operates in a ‘Copy-Exact’ lean process environment specializing in NPI, PCBA, system integration, CTO services, and is food and drug administration (“FDA”) and international traffic in arms regulations (“ITAR”) registered.

 

3

 

 

Our Markham, Ontario (Toronto) site serves as the corporate office and as a key center of excellence (“COE”), with particular emphasis on supporting our global manufacturing locations in value engineering, transition management, global supply chain management, financial and treasury services and information technology. In addition, the COE works directly with customers on product design projects of various scope and scale.

 

Our Chihuahua, Mexico facility serves as SMTC’s largest manufacturing and assembly operation, offering customers high quality services in a cost effective site. This facility operates in a ‘Copy-Exact’ lean process environment located close to North American OEMs. Offering state of the art PCBA and a full suite of system integration services, along with cable harness assembly and enclosure. This facility operates computer numerical control machining and precision sheet metal fabrication, this facility services those OEMs requiring the lowest cost North American manufacturing solutions.

    

Our ChangAn (Dongguan), China location serves as a large scale manufacturing facility and operates in a‘Copy-Exact’ lean process environment enabling SMTC to capitalize on the strengths of operations by providing SMTC’s current and prospective customers with highly efficient, low cost Asia-based electronic manufacturing solutions. This facility offers a full suite of integrated manufacturing services, including PCBA, testing, box build, final product integration, world-wide customer logistics, and expanded supply chain capabilities through our Hong Kong sourcing and procurement office.

 

Our Suzhou, China facility was closed in accordance with the restructuring plan we announced on May 15, 2017. The closure of the Suzhou Facility was initiated in the second quarter of 2017 and was substantially completed by the end of the 2017.

 

Industry Background

 

The EMS sector is the outsourced portion of the worldwide electronics assembly industry. There is currently considerable outsourcing of manufacturing by OEMs in response to rapidly changing markets, technologies and accelerating product life cycles as well as the need to lower total costs and convert typical fixed costs into a variable cost model.

 

Historically, OEMs were vertically integrated manufacturers that invested significantly in manufacturing assets and facilities around the world to manufacture, service and distribute their products. EMS originated as labor intensive functions were outsourced by OEMs to obtain additional capacity during periods of high demand. Early EMS providers were essentially subcontractors, providing production capacity on a transactional basis. However, with significant advances in manufacturing process technology, EMS providers developed additional capabilities and were able to improve quality and dramatically reduce OEMs’ costs. Furthermore, as the capabilities of EMS companies expanded, an increasing number of OEMs adopted and relied upon EMS outsourcing strategies. Over time, OEMs engaged EMS providers to perform a broader array of manufacturing services, including design and development activities. In recent years, EMS providers have further expanded their range of services to include advanced manufacturing, configuration, packaging and distribution and overall supply chain management. In addition, many OEMs are reducing the number of vendors from which outsourced services are purchased, and are partnering with EMS suppliers that offer broader expertise.

 

By outsourcing manufacturing, OEMs take advantage of the technology and manufacturing expertise of EMS companies and focus on their core business, while leveraging the manufacturing efficiency and capital investment of EMS providers. OEMs use EMS providers to enhance their competitive position by:

 

 

Lowering Product Costs.    EMS providers are better able to reduce total product costs due to electronic manufacturing expertise and higher utilization of manufacturing capacity spread over a wider range of product types. Due to their scale of operations as well as established and ongoing relationships with suppliers, EMS providers are able to achieve better pricing and better working capital management.

  

 

Reducing Time to Market.    Electronic products are experiencing shorter product life cycles, requiring OEMs to continually reduce the time required to bring new products to market. OEMs can significantly improve product development cycles and reduce time to market by benefiting from the expertise and infrastructure of EMS providers. This expertise includes capabilities relating to design, quick-turn prototype development and rapid ramp-up of new products to high volume production, with the critical support of worldwide supply chain management.

  

 

Improving Supply Chain Management.    OEMs that manufacture internally are faced with greater complexities in planning, sourcing, procurement and inventory management due to frequent design changes, short product life cycles and product demand fluctuations. OEMs can address these complexities by outsourcing to EMS providers that possess sophisticated supply chain management capabilities and can leverage significant component procurement advantages to lower product costs.

  

4

 

 

 

Accessing Advanced Manufacturing Capabilities and Process Technologies.    Electronic products and electronic manufacturing technology have become increasingly sophisticated and complex, making it difficult for many OEMs to maintain the necessary technological expertise and focus required to efficiently manufacture products internally. By working closely with EMS providers, OEMs gain access to high quality manufacturing expertise and capabilities in the areas of advanced process, interconnect and test technologies.

  

 

Improving Access to Global Markets.    OEMs are generally increasing their international activities in an effort to expand sales through access to foreign markets. EMS companies with worldwide capabilities are able to offer those OEMs global manufacturing solutions enabling them to meet local content requirements and to distribute products efficiently around the world at lower costs.

  

 

Reducing Capital Investments.    OEMs are able to reduce their capital investments in inventory, facilities and equipment by outsourcing their manufacturing to EMS providers and allocating their resources towards their core business activities.

  

 

Shift from a Fixed to Variable Cost Model.    Through outsourcing, OEMs are able to shed substantial fixed costs of manufacturing and take advantage of EMS providers’ efficient facilities, resulting in a highly variable and efficient cost structure.

 

 

SMTC Capabilities and Performance

 

SMTC’s EMS span the entire electronic product life cycle from the development and introduction of new products through the growth, maturity, and end of life phases. We believe that SMTC’s innovative manufacturing services have the capabilities to reduce our customers’ product costs and time to market, which improves competitiveness. We continuously work with our customers to identify, prioritize and implement opportunities for cost reduction.

 

SMTC offers three vertically integrated manufacturing streams: enclosures and precision metal fabrication products; PCBA products; and larger-scale systems. For each of these streams, SMTC provides a broad range of end-to-end manufacturing services, from assembly, test, integration and box-build through to system level test, CTO, BTO and DOF. These core services are complemented with cable assembly, interconnect and value engineering services. SMTC’s three manufacturing streams are vertically integrated to better control quality, lead times and inventory risk and to avoid the “margin stacking” that can occur when these services are provided by loosely connected entities. Customers benefit from lower costs, better quality, and shorter lead times.

 

Our vertically integrated manufacturing services include:

 

PCBA Services.    We provide advanced product assembly and system level integration and test services combined with advanced manufacturing equipment and processes. Our flexible environment allows SMTC to support low, medium and high mix and volume manufacturing requirements as well as to deliver a final product directly to the end customer.

 

System Level Integration, Box-Build and Test.    Our system and subsystem assembly services involve combining a wide range of subassemblies, including PCBAs, cables and harnesses, battery boxes and connector blocks, power supplies, backplanes and thermal controls. Our test expertise encompasses the full array of technologies present in today’s system level products, including high-speed digital, radio frequency, precision analog, power, thermal and optical. We provide complete electrical and mechanical testing for cables, harnesses, PCBAs, subassemblies and systems to meet our customers’ requirements and specifications. Our in-house expertise enables us to provide custom test development services to our customers and to implement their product specific tests.

 

Enclosures and Precision Metal Fabrication.    SMTC uses premium grade sheet steel, stainless steel, and aluminum ensuring high quality. Technologically advanced equipment and processes enable SMTC to produce medium to complex product enclosures and metal parts while still achieving a low overall product cost. Our soft tooling approach minimizes upfront costs and provides flexibility to respond quickly to engineering changes.

 

Custom Interconnect.    We are experienced in the design, development and manufacturing of interconnect assemblies such as optical and electrical cable and harness assemblies offering customers advanced expertise and low cost options.

 

Engineering Services.    We provide services across the entire product life cycle including product design, prototyping, qualification testing and sustaining engineering through product end of life.

 

5

 

 

Global Procurement and Supply Chain Network.    As an extension of our offering of vertically integrated manufacturing services, SMTC’s Global Procurement Group plays a fundamental role in our managing a portfolio of assets and relationships in the most efficient manner. Our global procurement expertise includes outsourcing based on market conditions and demand management criteria established with the customer, building flexibility into the supply chain network, designing a supply chain specific to individual customer needs, and having the ability to proactively plan. SMTC’s supply chain management team is responsible for all aspects of the Company’s supply network. This team works together with our customers to establish customized inventory, logistics and distribution services to ensure that any unique delivery requirements are met. Through the use of various management tools, this team focuses on driving improved inventory turns, lowers excess and obsolete inventory risk and seeks to reduce overall costs to SMTC customers.

 

Management Methods and Tools.    SMTC has a web-based system through which it can communicate, collaborate and plan throughout the entire supply chain in real-time with its customers and suppliers. This system accelerates the timeliness and effectiveness of decision making and the efficiency and flexibility with which SMTC can respond to customers experiencing unexpected market fluctuations. SMTC employs technologically advanced quality assurance systems, manufacturing process planning and continuous improvement methodologies.

  

SMTC Footprint

 

SMTC has three manufacturing/technology centers worldwide, which contain approximately 430,000 square feet of capacity, and more than 40 manufacturing and assembly lines. These facilities are strategically located in the United States, Mexico, and China, offering regional centers for new product introductions as well as low cost centers for higher volume production. All SMTC facilities adhere to the “Copy Exact” methodology. “Copy Exact” allows for a seamless and timely transition of production between facilities to help customers reach their cost and volume targets faster. SMTC also assigns a dedicated manufacturing unit to each customer.

 

SMTC Key Benefits to Customers

 

Three overarching themes form the core of SMTC’s differentiation and unique customer value proposition: trusted, proven, and professional. These three themes are exemplified by the following aspects of SMTC’s business:

 

Operational Counterpart:    We take the time to understand our customers’ business objectives, end markets, performance expectations, competitive advantage, positioning and strategy—to drive better value. We get involved with our customers at both a strategic and operational level. Inevitably, we become an extension of their business, helping our customers grow, improve competitiveness, margins, and gain market share.

 

The SMTC Customer Experience:    SMTC combines strong performance with a partnership approach that delivers tangible, bottom line benefits through committing expertise and resources towards customer goals. We believe it is one of many reasons why some SMTC customers have been with us for many years.

 

Our People:    SMTC’s customer-based teams are tied to the customer at a strategic, operational and organizational level. Our people create an environment that celebrates collaboration and teamwork. We foster a participatory workplace that enables people, at every level of the organization, to get involved in making decisions that put the customer first.

 

Executive Mindshare:    SMTC fully engages with its customers on many levels—from operational and executive mindshare, to custom-tailored solutions to its strategic partnership approach. Senior management is accessible to and involved with customers. Our customers receive the attention they need from highly experienced professional management.

 

Strategic Fit:    Fit matters. Winning OEMs look for winning manufacturing partners. SMTC mitigates the risk of outsourcing and seeks to deliver results and value.

 

Global Footprint:    SMTC offers a leading strategic and operational footprint with three manufacturing / technology centers worldwide, approximately 430,000 square feet of capacity, and more than 40 manufacturing and assembly lines. Our facilities are strategically located across a broad footprint in the United States, Mexico and China.

 

Superior Value:    SMTC continuously works collaboratively with customers to identify, prioritize and implement opportunities for cost reduction. Working collaboratively helps ensure superior service, operational excellence and continuous cost improvement.

 

Customized Solutions:    SMTC is proactive—we provide innovative manufacturing solutions responsive to the dynamics of the customer’s marketplace.  

 

6

 

 

SMTC’s Strategy

 

Our objective is to create increasing long term value to our stockholders through continuing growth in sales, profitability and debt minimization. A cornerstone to SMTC’s strategy is our customer-centric focus throughout the organization. Our key strategies include:

  

Provide Outstanding Customer Service and Performance.    Customer acquisition and loyalty comes from our ongoing commitment to understand our customers’ business performance requirements and our expertise in meeting or exceeding these requirements and enhancing their competitive edge. SMTC’s customer focus extends to our unique offering of dedicated resources, a detailed understanding of our customers’ challenges and how we can support our customers in meeting their goals. Our dedicated team approach is used throughout SMTC facilities and comprises members from all functional areas working together to better understand the unique needs of the customer, their challenges and future plans. Our strong customer partnership approach includes involvement from both operations and SMTC’s senior executive team demonstrating our commitment to understanding each customer’s goals, challenges, strategies, operations and products to provide a better overall solution.

 

Focus on Well Defined Customer Markets.    SMTC focuses on specific customer sectors that align well with the Company’s capabilities. These sectors primarily include industrial, networking and communications, power and energy and medical markets. Customers with unique medium to high mix and volume production requirements with a need for a high level of responsiveness to changing market demands are particularly well suited for SMTC’s capabilities. We continue to leverage our experience and established relationships in our existing market segments.

  

Provide Advanced Technological Capabilities.    We remain committed to enhancing our capabilities and value-added services to become an integral part of our customers’ operations. Through our investment in assembly and fabrication technologies and in design, engineering and test capabilities, we are able to provide our customers with a variety of advanced design and manufacturing solutions.

 

Provide Comprehensive Service Offerings.    SMTC’s broad array of electronic manufacturing services spans the entire electronic product life cycle from introduction and development of new products to the support of products to growth and maturity phases. We perform advanced PCBA and test and complement these capabilities with precision enclosure fabrication, system integration, product configuration, and BTO services. As products mature, we provide comprehensive value engineering services to reduce the cost of the products we produce without compromising quality or function. As products near their end of life, SMTC’s sustaining engineering and supply chain management systems ensure continued availability and support of hard to source components while mitigating the risks associated with declining inventories. We believe that our breadth of services provides greater control over quality, delivery and costs and enables us to offer our customers a complete, end-to-end solution that is time and cost effective.

 

Maintain a Competitive, Scalable Cost Structure.   We maintain a competitive cost structure that not only delivers highly competitive pricing to customers but also is both variable and scalable as market conditions dictate. We strive to improve profitability through tight cost containment measures, performance excellence, leveraging fixed costs and increased capacity utilization. We have made investments in manufacturing capacity and will continue to do so.

 

Technology, Processes and Development

 

The SMTC engineering services team delivers a range of design, engineering and manufacturing solutions. We have electronic engineering expertise in many markets, including industrial, networking and communications, power and energy and medical. We maintain manufacturing equipment and tools to the highest calibration standards possible. We follow a comprehensive preventative maintenance program. Customers rely on our full range of design services—from software and firmware development, to electronic design, mechanical design and PCB layout. Our design services capability optimizes product design for maximum performance, higher yields, and faster time to market, with the objective of assisting our customers in becoming more profitable and more competitive. We partner with our customers to deliver innovative manufacturing solutions aligned with their business objectives. We offer everything from full-service, turnkey product development and manufacturing to on site engineering support.

  

SMTC’s box build experience spans the past 18 years with all manufacturing sites supporting current customers in this level of outsourcing. Our integration and box build assembly services involve combining a wide range of subassemblies, including PCBAs, cables and harnesses, external housing (plastic and metal), monitors, battery boxes and connector blocks, power supplies, fan trays, backplanes and thermal controls. Integrated units are packaged, together with manuals, software, and peripherals. DOF and BTO are handled throughout the integration service, specific to the needs of our customers.

 

7

 

 

SMTC’s DOF and distribution operations help our customers reduce material storage, lower handling costs and achieve higher inventory turns. We also implement responsive, efficient and cost-effective configure to order and order fulfillment solutions. We align our processes with the customers’ operations, selling and distribution objectives to eliminate redundancies and associated costs.  

 

SMTC continues to invest in new processes and equipment that enable the assembly of industry leading product designs. In 2017, investments were made in automated 3D solder paste inspection, 3D x-ray inspection, in-line Automated Optical Inspection (AOI), high volume selective wave solder, ultrasonic welding of plastics, the addition of a Class 5 clean room and automated cable stripping and crimping for wire harnesses.

 

We believe that SMTC applies best-in-class quality programs, processes and metrics to achieve exceptional quality standards. We endeavor to fully understand the quality requirements for every customer and we continuously review to improve our quality performance to exceed customer expectations. All SMTC sites currently use Computer Integrated Manufacturing (“CIM”), a common quality management platform. The CIM system tracks quality assurance processes in real-time and reports on all steps in the manufacturing process. SMTC is continuing to make investments in quality, and is in the process of replacing the existing CIM system with Factory Logix, a product from Aegis Industrial Software. This investment will improve transaction control on the production floor and traceability at the component and product level. We use a customer-centric, team-based approach to quality assurance. Dedicated professionals work with our customers to determine key quality requirements, and where applicable, they ensure suppliers adhere to those standards as well. All SMTC sites are certified with the International Organization for Standardization (“ISO”) ISO-9001 quality management system standard and ISO-13485 medical standards. In 2017 SMTC updated all ISO 9001 registrations to the latest level (2015 version of the standard). All SMTC sites have also achieved the Environmental Management Standards ISO-14001 certification. SMTC builds PCBAs according to IPC standards, an association connecting the electronic industries, and has been an IPC member since 1991. We also work closely with standards organizations such as Underwriters Laboratories, a safety consulting and certification company and Canadian Standards Association, in compliance with customer requirements. Our Fremont and Chihuahua Mexico locations are registered FDA facilities and are in compliance with federal Good Manufacturing Practice and the Quality System Regulations.  

 

 

Marketing and Sales

 

Our direct sales channel model is organized and managed with territorial assignments based on geographical coverage of our target markets globally. During 2017, we developed relationships and established a network of sales representative firms that focus on specific territories in the U.S. Our marketing and sales team work collaboratively to gain insight on potential customers’ business and market positioning and focus on a solutions-based approach to enhance profitability, market positioning and business performance for customers.

 

We develop relationships with our customers and market our vertically integrated manufacturing services through our direct marketing and sales teams. Our direct sales teams work closely with the customers' engineering and technical personnel to better understand their requirements. Our marketing team supports our business strategy of providing end-to-end services by encouraging cross selling of vertically integrated manufacturing services across a broad range of major OEM products. To achieve this objective, our marketing and sales teams work closely with our various manufacturing, design and engineering groups to engage in marketing and sales activities targeted towards key customer opportunities.

 

Our customer-centric focus continues through to the execution phase of our relationships with a dedicated customer focused team-based manufacturing approach throughout all SMTC facilities. A dedicated account team including a global account manager are directly responsible for managing each of our key customer accounts. Global account managers coordinate activities across geographic locations to effectively satisfy customer requirements and have direct access to our senior management to quickly address customer concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.

 

Global Procurement and Supply Chain Management

 

SMTC delivers supply chain capabilities and solutions that support the total product lifecycle. Our teams work closely with customers’ supply-base partners to integrate the entire supply chain. Our extended supply chain model recognizes the need for collaboration between OEM customers, SMTC and supply partners to ensure overall supply chain optimization, from product design processes, manufacturing, sourcing, order management and fulfillment to transportation and logistics. The end result is greater control over a complex, extended supply chain to help SMTC customers realize flexibility, cost savings, process improvements, and competitive advantages.

 

8

 

 

In lean manufacturing environments, success is defined by how fast and how effectively manufacturers can respond to evolving customer demands and new global supply chain conditions. SMTC leverages supply chain tools and systems to respond rapidly and effectively to changing real-world conditions. Our customers rely on SMTC’s core processes and capabilities to drive the success of their supply chains. Each supply chain solution we deliver is tailored to address each customer’s unique requirements.

 

SMTC employs Agile Product Lifecycle Management (“Agile”) solutions software to help OEMs accelerate revenue, reduce costs, improve quality, ensure compliance, and drive innovation throughout the product lifecycle. Agile provides comprehensive support for product lifecycle business processes, platform and integration requirements. Agile enables a single enterprise view of the product and part records across the entire system, helping customers accelerate new product introduction time, reduce direct material costs and ensure regulatory compliance.

 

The demand management process is a core process at SMTC, which drives short and long term planning and execution activities. Effective demand management optimizes materials availability, supply base performance and overall liability management. We recognize the need to deploy people, process and technology, as well as extensive customer communication and visibility, to ensure effective demand management execution. This allows for real time analysis, feedback and implementation of changes in customer and end-market demand, rapid communication to suppliers of changes in requirements, and a truly responsive end-to-end supply chain.

  

SMTC also employs Kinaxis RapidResponse, an integrated response management tool that allows supply chain professionals to access real-time information and enable collaboration across extended supply networks. The tool allows SMTC to perform real-time demand scenario simulation, review supply constraints, perform rapid manufacturing resource planning, clear to build analysis and communicate changes in requirements to suppliers—all on the same day. With Kinaxis RapidResponse, SMTC teams are able to achieve high levels of supply chain agility with immediate response to changes in demand, supply, capacity and daily operations. The platform enables real-time supply chain visibility and on-line collaboration anywhere in the world. In this way, SMTC gains the insight needed to quickly and effectively respond to a wide variety of supply chain challenges.

 

Visibility solutions are customized to support a range of requirements, including inventory visibility, master production schedule simulation, clear-to-build, available-to-promise, end-market demand steering, and service parts management. Kinaxis RapidResponse provides a single view of inventory across all SMTC facilities and inventory hub locations as well as a view of materials supply. Custom reports can be set up to automatically email within SMTC and to SMTC customers on regular intervals. This inventory and supply base liabilities dashboard has proven to be a valuable tool for both SMTC and our customers. Visibility solutions include intercompany processes and multi-node supply chains.

 

The Company has a global commodity manager in Kowloon, Hong Kong who serves to improve access to the broad base of component suppliers in the Asia region and provides the Company with competitive pricing. The Hong Kong office manages component sourcing to support SMTC’s global operations.

 

SMTC Suppliers

 

RapidResponse works hand-in-hand with custom electronical data interchange (“EDI”), business-to-business process that provides real-time and daily information exchange and transactions with suppliers. Through EDI programs, SMTC has an ongoing view into supplier on-hand inventories and is able to more effectively plan factory capacities and provide customer delivery commitments.

 

With our web-based collaborative planning systems, our customers’ needs are integrated with our suppliers in a more efficient and cost effective manner than is achievable through traditional EDI. We believe our volume of procurement enhances our ability to obtain better pricing, influence component packaging and design and obtain supply of components in constrained markets.

 

We generally order materials and components under our agreements with customers only to the extent necessary to satisfy existing customer orders or forecasts. We have implemented specific inventory management strategies with certain suppliers via vendor managed inventory programs into SMTC supply chain programs. Fluctuations in material costs typically are passed through to customers. We may agree, upon request from our customers, to temporarily delay shipments, which causes a corresponding delay in our revenue recognition and an increase in inventory. Ultimately, however, our customers generally are responsible for all materials purchased and goods manufactured on their behalf.

 

9

 

 

SMTC Customers

 

SMTC is a distinctive mid-tier EMS provider, supporting customers in industrial, networking and communications, power and energy and medical sectors.

 

       Revenue in 2017 was attributed to the following industry sectors: 47.3% from industrial, 33.2% from networking and communications, 7.8% from power and energy and 11.7% from medical.

 

Industrial product expertise includes:

 

 

Semiconductor manufacturing and test equipment

 

Electrical distribution, industrial controls

 

Point of Sale terminals

 

Currency recognition devices

 

Residential and commercial security systems

 

GPS navigation and positioning systems

 

Components and sub-systems for rapid prototyping equipment

 

RF modules for satellite based tracking systems

 

Protocol analyzers

 

Laser precision measurement equipment

 

CCD and CMOS cameras for machine vision systems

 

Robotics & automation systems

 

High-end audio systems

 

Home security systems

 

Sports and recreational equipment

 

Digital imaging & camera products

 

Touch screen & handheld panel devices

 

GPS and sensor-enabled micro optics displays

 

Networking and Communication product expertise includes:

 

 

VoIP infrastructure, accessing, IVR systems

 

Carrier class switching and routing systems

 

Broadcast communication equipment

 

Broadband accessing, ADSL and wireless gateway, modem

 

Video and audio signal processing and distribution systems

 

Network traffic management devices

 

Network application delivery and optimization

 

Test and Measurement enhanced equipment

 

Private IP communications devices

 

Radio Frequency enhanced equipment

 

Professional audio and video processing and distribution systems

 

Handheld internet access devices

 

High-end storage devices

 

Office printers, networked production and industrial printing systems

 

Mid-range servers and computing systems

 

Electronic display systems

 

Financial terminals with biometric authentication

 

Digital media systems

 

Supercomputing and cloud computing platforms

 

Mobile Smart and Wi-Fi/Bluetooth devices

 

10

 

 

Power and Energy product expertise includes:

  

 

Solar capital equipment products

 

PV module assembly and manufacturing

 

Small, medium and large inverters, combiners and power products

 

Smart grid products

 

Solar power inverters

 

Power storage & convertors

 

Notebook and tablet rechargeable battery

 

Power monitor and controllers

 

Power battery chargers & analyzers

 

Energy controllers and monitors

 

Environment control thermostats

 

LED lighting systems

 

Power distribution unit with sentry power utility

 

Medical product expertise includes:

 

 

Diagnostic devices

 

Imaging and laboratory equipment

 

Patient monitoring systems

 

Infusion pumps and dispensing systems

 

Medication dispensing devices

 

Health and wellness personal products

 

Healthcare management

 

Dental equipment

 

Electron microscopes

 

Environmental equipment, process for scientific instruments

 

Blood glucose meters

 

Medical imaging and laboratory X-ray equipment

 

Portable oxygen concentrator

 

SMTC achieved ISO-13485 certification at all sites worldwide. ISO-13485 is an internationally recognized quality management system and standard for the manufacture of medical devices. The ISO-13485 certification may open up new opportunities in the medical device industry for SMTC. The certification validates SMTC’s expertise and capabilities that provide the safe design, manufacturing, testing, servicing and installation of products for the medical industry and builds on more than 25 years’ experience working in partnership with OEMs. Our Fremont, California and Chihuahua, Mexico locations are registered FDA facilities and are in compliance with federal Good Manufacturing Practice and the Quality System Regulations.  

 

11

 

 

Our Competition

 

The EMS industry is composed of numerous companies that provide a range of manufacturing services for OEMs, from PCBA, to design, prototyping, final system assembly, configuration, order fulfillment, repair and aftermarket services. The EMS market consists of contract manufacturers (“CMs”), and original design manufacturers (“ODMs”). CMs manufacture products that have been designed by the OEM; ODMs also design their own products, primarily commodities, and in many instances are in direct competition with the OEMs. SMTC participates in the mid-sized CM sector.

 

CM providers fall within one of four tiers:

 

Large/Tier 1: Global operations with manufacturing facilities in North America, Europe and Asia, and low-cost manufacturing sites in Asia, Mexico and Eastern Europe. Large CMs annual revenues generally are greater than $2.0 billion. This includes Celestica Inc., Flextronics International Ltd., Jabil Circuit, Inc., Sanmina, Inc., Benchmark Electronics Inc. and Plexus Corp.

 

Mid-size/Tier 2: Usually focused in one region such as North America, Europe or Asia, with facilities in that region supported by additional facilities in low-cost regions. Mid-sized CMs generally have annual revenues of up to $2.0 billion. This includes Sparton and Key Tronic Corp.

 

Regional /Tier 3: Usually focused in North America and typically with minimum operations in low-cost geographic regions and less than $300 million in annual revenues. This includes IEC and Sigmatron.

 

Small/Tier 4: Usually single facility operations, with annual revenues less than $20 million.

 

We compete with different companies depending on the type of service we are providing or the geographic area in which an activity takes place. Some of our competitors may have greater scale and provide a broader range of services than we offer. We believe that the principal competitive factors in the manufacturing services market are quality and range of services, design and technological capabilities, cost, location of facilities, responsiveness and flexibility. To remain competitive, we believe we must continue to provide technologically advanced manufacturing services and solutions, maintain quality levels, offer flexible delivery schedules, deliver finished products and services on time and compete favorably on price.  

 

 

Governmental Regulation

 

Our operations are subject to certain federal, state, provincial and local regulatory requirements primarily relating to environmental compliance and site cleanups, waste management and health and safety matters. In particular, we are subject to regulations pertaining to health and safety in the workplace and the use, storage, discharge and disposal of hazardous chemicals used in the manufacturing process.

 

          Our commitment is to conduct our business in such a way that protects and preserves the environment, health and safety of our employees, our customers and the communities where we live and operate. The Company cooperates with government agencies that have the mandate to verify compliance to relevant environmental laws.

 

The electronics industry is subject to the European Union’s Restrictions of Hazardous Substances, or RoHS, and Waste Electrical and Electronic Equipment, or WEEE, directives. The State of California put into effect a similar measure under the Electronic Waste Recycling Act of 2003, which requires the California Department of Toxic Substances Control to adopt regulations to prohibit the sale of electronic devices if they are prohibited from sale in the European Union because they contain certain heavy metals. Parallel initiatives are being proposed in other jurisdictions, including several other states in the United States and in the People’s Republic of China. RoHS prohibits the use of lead, mercury and certain other specified substances in electronics products and WEEE requires industry OEMs to assume responsibility for the collection, recycling and management of waste electronic products and components. SMTC’s sites are fully capable of producing RoHS compliant products as directed by our customers. In the case of WEEE, the compliance responsibility rests primarily with OEMs rather than with EMS companies. However, OEMs may turn to EMS companies for assistance in meeting their WEEE obligations. We are committed to comply with the directives/regulations that require disclosures regarding conflict minerals and measures taken to combat human trafficking and slavery. In particular, we are adopting best practices developed by industry groups, such as the Global e-Sustainability Initiative and the electronics industry citizenship coalition (“EICC”), to conduct our due diligence in these areas. We work collaboratively with our suppliers to encourage their compliance with the EICC's supply chain initiatives.

 

12

 

 

To date, the costs of compliance and environmental remediation have not been material. Nevertheless, additional or modified requirements may be imposed in the future. If such additional or modified requirements are imposed on us, or if conditions requiring remediation are found to exist, we may be required to incur additional expenditures.

 

Our Structure and Our History

 

We are a Delaware Corporation incorporated in July 1998. Our present corporate structure resulted from the July 1999 combination of predecessor companies Surface Mount and HTM Holdings Inc. Subsequent to the combination, all of Surface Mount’s operating subsidiaries, other than SMTC Canada and Qualtron, Inc., became subsidiaries of HTM Holdings Inc. In 2011, we expanded our operations in San Jose, California with the acquisition of ZF Array Technology, Inc. (“ZF Array”), a privately held electronics manufacturing services provider. In 2012, the Asian entities of SMTC Electronics Dongguan Company Limited and SMTC Electronics (Suzhou) Company Limited were established. Our SMTC Electronics (Suzhou) Company Limited, China facility was closed in accordance with the restructuring plan as announced on May 15, 2017. The closure of the SMTC Electronics (Suzhou) Company Limited, China facility was initiated in the second quarter of 2017 and was substantially completed by the end of 2017.

 

 

Backlog

 

Our backlog is typically a combination of purchase orders and forecasts. Our customers typically provide purchase orders for delivery of products due within 30 to 90 days. We are also provided additional demand beyond 90 days to drive material demand and perform resources and capacity planning. We do not believe that the backlog of expected product sales covered only by purchase orders is a meaningful measure of future sales since additional orders may be added, or orders rescheduled or cancelled.

 

Employees

 

As of December 31, 2017, we employed approximately 1,171 employees of which 1,110 are full-time employees. In addition, we employ varying levels of temporary employees as our production demands. Given the variable nature of our project flow and the quick response time required by our customers, it is critical that we are able to quickly adjust our production levels to maximize efficiency. To achieve this, our strategy has been to employ a skilled temporary labor force, as required. We use outside contractors to qualify our temporary employees on a site-by-site basis. Our production level temporary employees are compensated by the hour. We believe we are team-oriented, dynamic and results-oriented with an emphasis on customer service and quality at all levels. We believe this environment is a critical factor for us to be able to fully utilize the intellectual capital of our employees. Because of the surplus of available talent on the market, and the strength of our total compensation packages, to date we have not experienced any issues attracting skilled employees.

 

As of December 31, 2017, our only unionized employees were at our Mexico facility, representing a portion of our Mexican labor force. We have never experienced a work stoppage or strike and believe we have good employee relations.  

 

13

 

 

Item 1A.

Risk Factors

 

RISKS RELATED TO OUR BUSINESS AND INDUSTRY

 

A majority of our revenue comes from a small number of customers; if we lose any of these customers, our revenue could decline significantly.

 

We operate in a highly competitive and dynamic marketplace in which current and prospective customers often seek to lower their costs through a competitive bidding process among EMS providers. This process creates an opportunity to increase revenue to the extent we are successful in the bidding process, however, there is also the potential for revenue decline to the extent we are unsuccessful in the process. Furthermore, even if we are successful, there is the potential for our margins to decrease.

 

Our two largest customers each represented 11.9% of our total revenue for the year ended December 31, 2017. Our top ten largest customers collectively represented 72.5% of our total revenue for the year ended December 31, 2017. We expect to continue to depend upon a relatively small number of customers for a significant percentage of our revenue. In addition to having a limited number of customers, we manufacture a limited number of products for each of our customers. If we lose any of our largest customers (as we have historically experienced in the past) or any product line manufactured for one of our largest customers, we would experience a significant reduction in our revenue. The insolvency of one or more of our largest customers or the inability of one or more of our largest customers to pay for its orders would decrease revenue significantly. A reduction in revenue can decrease our profitability and adversely affect our business, financial condition and results of operations.

 

We are exposed to general economic conditions, which could have an adverse impact on our business, operating results and financial condition.

 

As a result of unfavorable economic conditions, reduced capital spending and changes in our customers’ manufacturing requirements, our revenues have declined during each of the last three years. If general economic conditions deteriorate, we may experience an adverse impact on our business, operating results and financial condition, since end customer demand for our customers’ products could be adversely affected. Due to the uncertainty surrounding the economy and the Company’s ability to predict the effect such conditions will have on its customers, the Company cannot predict the scope or magnitude of the negative effect that any economic slowdown may have on it.

 

We are exposed to fluctuations in currencies against the U.S dollar.

 

Most of our sales and component purchases are denominated in U.S. dollars. Our Canadian, Mexican and Asian payroll, Euro based component purchases and other various expenses are denominated in local currencies. As a result, the Company enters into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to the forecasted Canadian dollar and Mexican peso. The Company has decided at this time not to hedge exposure due to foreign exchange currency related to Euro component purchases or Asian payroll. To the extent we are not able to effectively manage this exposure to foreign exchange rate fluctuations, our revenues and profitability could be adversely affected.

 

Our industry is very competitive and we may not be successful if we fail to compete effectively.

 

The EMS industry is highly competitive. We compete against numerous large domestic and foreign EMS providers but consider our peer group and direct competitors to be IEC Electronics Corp., Key Tronic Corp., Nortech Systems Inc., Sigmatron International Inc., Sparton Corp. and Sypris Solutions Inc. We may in the future encounter competition from additional large electronics manufacturers that are selling, or may begin to sell, electronics manufacturing services. Some of our competitors have substantially greater manufacturing, financial, research and development and marketing resources and lower cost structures than us. We also face competition from the manufacturing operations of current and potential customers, which are continually evaluating the merits of manufacturing products internally versus the advantages of using external manufacturers.

 

14

 

 

 We experience variability in our operating results, which could negatively impact the price of our shares.

 

Our annual and quarterly results have fluctuated in the past. The reasons for these fluctuations may similarly impact our business in the future. Prospective investors should not rely solely on our results of operations in any past period to indicate what our results will be for any future period. Our operating results may fluctuate in the future as a result of many factors, including:

 

 

variations in the timing and volume of customer orders relative to our manufacturing capacity;

 

variations in the timing of shipments of products to customers;

 

introduction and market acceptance of our customers’ new products;

 

changes in demand for our customers’ existing products;

 

the accuracy of our customers’ forecasts of future production requirements;

 

changes in customers and customer or product attrition;

 

effectiveness in managing our manufacturing processes, inventory levels and costs;

 

changes in competitive and economic conditions generally or in our customers’ markets;

 

willingness of suppliers to supply the Company on normal credit terms; and

 

changes in the cost, or availability, of components or skilled labor.

 

In addition, most of our customers typically do not commit to firm production schedules more than 30 to 90 days in advance. Accordingly, it is difficult for us to forecast the level of customer orders with certainty. As a result, we may not be able to schedule production to maximize utilization of our manufacturing capacity. In the past, we have been required to increase staffing, purchase materials and incur other expenses to meet the anticipated demand of our customers. Sometimes anticipated orders from customers have failed to materialize and, at times, delivery schedules have been deferred as a result of changes in a customer’s needs. Any material delay, cancellation or reduction of orders from our larger customers could cause our revenue to decline. In addition, a reduction in customer demand may decrease our gross margins and adversely affect our business, financial condition and results of operations. On other occasions, customers have required rapid and unexpected increases in production, which have placed burdens on our manufacturing capacity and supply chain function and adversely affected costs.

 

Any of these factors or a combination of these factors could have an adverse impact on our business, financial condition and results of operations.

 

We are dependent upon the industry sectors we service, which produce electronic products that are technologically advanced with short life cycles.

 

Most of our customers develop technologically advanced electronic products, which are characterized by intense competition, short product life cycles and significant fluctuations in product demand. In addition, these products are generally subject to rapid technological change and product obsolescence. If our customers are unable to create products that keep pace with the changing technological environment, their products could become obsolete and the demand for our services could significantly decline. Our success is largely dependent on the success achieved by our customers in developing and marketing their products. Furthermore, the electronics industry is subject to economic cycles and has in the past experienced downturns. A decline in the industry demand for these products would likely have an adverse impact on our business, financial condition and results of operations.  

 

Consolidation in the industry sectors we operate in may adversely affect our business by increasing customer buying power or increasing competition.

 

Consolidation in the industry sectors among our competitors, our customers, or both, may result in increasing or strengthening large electronics companies. The significant buying and market power of these companies may increase competitive pressures on us, which could negatively impact our margins. In addition, if any of our large customers are acquired or merged, we may lose that customer’s business.

 

Shortages or price fluctuations of component parts specified by our customers could delay product shipment and affect our profitability.

 

A substantial portion of our revenue is derived from turnkey manufacturing. In turnkey manufacturing, we provide both the materials and the manufacturing services. If we fail to manage our inventory effectively, we may bear the risk of fluctuations in materials costs, scrap and excess inventory, all of which can have an adverse impact on our business, financial condition and results of operations. In addition, delays, cancellations or reductions of orders by our customers could result in an excess of materials. Orders received from customers within component lead time, rapid increases in orders or lengthening of lead times by suppliers could cause a shortage of materials. A shortage of materials could lengthen production schedules and increase costs. An excess of materials may increase the costs of maintaining inventory and may increase the risk of inventory obsolescence, both of which may increase expenses and decrease profit margins and operating income.

 

15

 

 

Many of the products we manufacture require one or more components that we order from sole-source suppliers. Supply shortages for a particular component can delay production of all products using that component or cause cost increases in the services we provide. In addition, in the past, some of the materials we use, such as memory and logic devices, have been subject to industry-wide shortages. At such times, suppliers allocate available quantities among their customers, and we have not been able to obtain all of the materials required. Our inability to obtain these materials could slow production or assembly, delay shipments to our customers, increase costs and reduce operating income. Also, we may bear the risk of periodic component price increases, which if we are not able to recover from our customers, could reduce our operating income. In addition, we rely on a variety of common carriers for materials transportation, and we route materials through various world ports. A work stoppage, strike or shutdown of a major port or airport could result in manufacturing and shipping delays or expediting charges, which could have an adverse impact on our business, financial condition and results of operations.

 

 

We may encounter difficulties with acquisitions and divestitures, which could harm our business.

 

We have completed acquisitions of businesses in the past and we may acquire additional businesses in the future. Any future acquisitions may require additional equity financing, which could be dilutive to our existing shareholders, or additional debt financing, which could increase our leverage and potentially affect our credit ratings. Any downgrades in our credit ratings associated with an acquisition could adversely affect our ability to borrow by resulting in more restrictive borrowing terms. As a result of the foregoing, we also may not be able to complete acquisitions or strategic customer transactions in the future to the same extent as in the past, or at all.

 

To integrate acquired businesses, we must implement our management information systems, operating systems and internal controls, and assimilate and manage the personnel of the acquired operations. The difficulties of this integration may be further complicated by geographic distances. The integration of acquired businesses may not be successful and could result in disruption to other parts of our business. In addition, the integration of acquired businesses may require that we incur significant restructuring charges.

 

In addition, acquisitions involve numerous risks and challenges, including:

 

 

diversion of management's attention from the normal operation of our business;

 

potential loss of key employees and customers of the acquired companies;

 

difficulties managing and integrating operations in geographically dispersed locations;

 

the potential for deficiencies in internal controls at acquired companies;

 

increases in our expenses and working capital requirements, which reduce our return on invested capital;

 

lack of experience operating in the geographic market or industry sector of the acquired business;

 

cybersecurity and compliance related issues;

 

initial dependence on unfamiliar supply chain or relatively small supply chain partners; and

 

exposure to unanticipated liabilities of acquired companies.

 

In addition, divestitures involve significant risks, including without limitation, difficulty finding financially sufficient buyers or selling on acceptable terms in a timely manner, and the agreed-upon terms could be renegotiated due to changes in business or market conditions. Divestitures could adversely affect our profitability and, under certain circumstances, require us to record impairment charges or a loss as a result of the transaction. In addition, completing divestitures requires expenses and management attention and could leave us with certain continuing liabilities.

 

These and other factors have harmed, and in the future could harm, our ability to achieve anticipated levels of profitability at acquired operations or realize other anticipated benefits of an acquisition or divestiture, and could adversely affect our business and operating results.

 

Volatility in the financial markets.

 

Our ability to obtain future financing or amend the existing terms of our current credit and long-term debt facilities on terms acceptable to us may be adversely impacted by the volatility of the credit markets. In addition, the volatility could negatively impact our customers, certain of their customers, and our suppliers. These impacts could lead to a decrease in demand for our services, as well as our customers’ products, or a decrease in supply of our inputs, which could result in a negative effect on our results of operations or in our customers having insufficient financing to support their business.

 

16

 

 

If we are unable to respond to rapidly changing technology and process development, we may not be able to compete effectively.

 

The market for our services is characterized by rapidly changing technology and continuing process development. The future success of our business will depend in large part upon our ability to maintain and enhance our technological capabilities, to develop and market services that meet changing customer needs, and to successfully anticipate or respond to technological changes on a cost-effective and timely basis. In addition, the EMS industry could in the future encounter competition from new or revised technologies that render existing technology less competitive or obsolete or that reduce the demand for our services. We may not be able to effectively respond to the technological requirements of the changing market. To the extent we determine that new technologies and equipment are required to remain competitive, the development, acquisition and implementation of such technologies and equipment may require us to make significant capital investments. We may not be able to access capital for these purposes in the future and investments in new technologies may not result in commercially viable technological processes.  

 

Cyber security incidents could have a material adverse effect on our operations and financial results.

 

Our operations and systems could be interrupted by cyber security attacks. Such events could make it difficult to manufacture or deliver products to our customers due to our reliance on our systems in the day to day operations of our business. While we maintain security and back-up procedures to business recovery plans that are intended to allow us to recover from natural disasters or other events that can be disruptive to our business, some of our systems are not fully redundant and we cannot be sure that our plans will fully protect us from all such disruptions.

 

If the products we manufacture are defective, demand for our services may decline and we may be exposed to product liability and product warranty claims.

 

Defects in the products we manufacture, whether caused by a design, engineering, manufacturing or component failure or deficiencies in our manufacturing processes, could result in product or component failures, which may damage our business reputation, and expose us to product liability or product warranty claims.

 

If a product or component we manufacture is found to cause any personal injury or property damage or is otherwise found to be defective, we could incur significant expenditures to resolve any potential claims resulting from such damages or defects. In addition, any such claim could hurt our reputation or position in the marketplace, which could result in the loss of existing customers and our ability to attract new ones. A successful product liability or product warranty claim could have a material adverse effect on our business, financial condition and results of operations.

 

Although, generally, liability for these claims in our contracts rest with our customers, our customers may or may not have the resources to satisfy claims for costs or liabilities arising from a defective product or component for which they have assumed responsibility.

 

 

We are subject to the risk of increased taxes.

 

We base our tax position upon the anticipated nature and conduct of our business and upon our understanding of the tax laws of the various countries in which we have assets or conduct activities. Our tax position, however, is subject to review and possible challenge by taxing authorities and to possible changes in law. We cannot determine in advance the extent to which some jurisdictions may assess additional tax or interest and penalties on such additional taxes.

 

Our business will suffer if we are unable to attract and retain key personnel and skilled employees.

 

Our business depends on our ability to continue to recruit, train and retain skilled employees, particularly executive management, engineering and sales personnel. Recruiting personnel in our industry is highly competitive. Our ability to successfully implement our business plan depends in part on our ability to attract and retain management and existing employees. There can be no assurance that we will be able to attract and retain, now or in the future, executive officers and key personnel. In addition, if we receive a significant volume of new orders at any one time, we may have difficulty recruiting skilled workers to respond to such orders and accordingly may experience delays that could adversely affect our ability to meet customers’ delivery schedules.

 

17

 

 

Risks particular to our international manufacturing operations could adversely affect our overall results.

 

Our international manufacturing operations are subject to inherent risks, including:

 

 

fluctuations in the value of currencies and high levels of inflation;

 

longer payment cycles and greater difficulty in collecting amounts receivable;

 

reduced credit and payment terms with vendors;

 

unexpected changes in and the burdens and costs of compliance with a variety of foreign laws;

 

political and economic instability;

 

increases in duties and taxation;

 

changes in international trade agreements;

 

imposition of restrictions on currency conversion or the transfer of funds; and

 

trade restrictions.

 

In 2017, 84.9% of our revenue was earned from products that we manufactured internationally (outside of the U.S). Changes to laws, regulations or trade agreements in relation to Mexico or China could have an adverse impact on our business, financial condition and results of operations.

 

We are subject to a variety of environmental laws, which expose us to potential liability.

 

Our operations are regulated under a number of federal, state, provincial, local and foreign environmental and safety laws and regulations which govern, among other things, the discharge of hazardous materials into the air and water as well as the handling, storage and disposal of such materials. Compliance with these environmental laws is a major consideration for us because we use metals and other hazardous materials in our manufacturing processes. We may be liable under environmental laws for the cost of cleaning up properties we own or operate if they are or become contaminated by the release of hazardous materials, regardless of whether we caused such release. In addition we may be liable for costs associated with an investigation and remediation of sites at which we have arranged for the disposal of hazardous wastes, if such sites become contaminated, even if we fully comply with applicable environmental laws. In the event of a contamination or violation of environmental laws, we could be held liable for damages including fines, penalties and the costs of remedial actions and could also be subject to revocation of our discharge permits. Any such revocations could require us to cease or limit production at one or more of our facilities, thereby having an adverse effect on our operations. Environmental laws could also become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with any violation, which could have an adverse effect on our business, financial condition and results of operations.

 

Our customers may cancel their orders, change production quantities or locations, or delay production, and the inherent difficulties involved in responding to these demands could harm our business.

 

Our industry must provide increasingly rapid product turnaround for its customers. We generally do not obtain firm, long-term purchase commitments from our customers and we continue to experience reduced lead-times in customer orders. Customers may cancel their orders, change production quantities, delay production or change their sourcing strategy for a number of reasons. Such changes, delays and cancellations may lead to our production and possession of excess or obsolete inventory, which we may not be able to sell to the customer or a third party. The success of our customers’ products in the market affects our business. Cancellations, reductions, delays or changes in sourcing strategy by a significant customer or by a group of customers could negatively impact our operating results by reducing the number of products that we sell, delaying the payment to us for inventory that we purchased and reducing the use of our manufacturing facilities, which have associated fixed costs not dependent on our level of revenue.

 

In addition, we make significant decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimate of customer requirements. The short-term nature of our customers’ commitments and the possibility of rapid changes in demand for their products reduce our ability to accurately estimate the future requirements of those customers.

  

On occasion, customers may require rapid increases in production, which can stress our resources and reduce operating margins. In addition, because many of our costs and operating expenses are relatively fixed, a reduction in customer demand can harm our gross profits and operating results.

  

We structure our agreements with customers to mitigate our risks related to obsolete or unsold inventory. However, enforcement of these contracts may result in material expense and delay in payment for inventory. If any of our significant customers become unable or unwilling to purchase such inventory, our business may be materially harmed. 

  

18

 

 

Intellectual property infringement claims against our customers or us could harm our business.

 

Our design and manufacturing services offerings involve the creation and use of intellectual property rights, which subject us to the risk of claims of intellectual property infringement from third parties, as well as claims arising from the allocation of intellectual property rights between us and our customers. In addition, our customers may require that we indemnify them against the risk of intellectual property infringement. If any claims are brought against us or our customers for such infringement, whether or not they have merit, we could be required to expend significant resources in defense of such claims. In the event of such an infringement claim, we may be required to spend a significant amount of money to develop non-infringing alternatives or obtain licenses. We may not be successful in developing such alternatives or obtaining such licenses on reasonable terms or at all. 

 

We have incurred substantial restructuring charges in the past and we may continue to do so in the future.

 

We have incurred significant expenses related to restructuring of our operations in the past and may continue to do so in the future. We have incurred in the past, and may incur in the future, costs related to workforce reductions and facility closures. We may be required to record additional charges related to restructuring activities in the future, but cannot predict the timing or amount of such charges. Any such charges would reduce our earnings.

 

If OEMs stop or reduce their manufacturing and supply chain outsourcing, our business could suffer.

 

Future growth in our revenues depends on new outsourcing opportunities in which we assume additional manufacturing and supply chain management responsibilities from OEMs. Current and prospective customers continuously evaluate our capabilities against other providers and the merits of manufacturing products themselves. To the extent that outsourcing opportunities are not available, either because OEMs decide to perform these functions internally or because they use other providers of these services, our future growth would be limited.

 

From time to time, we are involved in various legal proceedings.

 

In the past, we have been notified of claims relating to various matters including intellectual property rights, contractual matters or other issues arising in the ordinary course of business. In the event of such a claim, we may be required to spend a significant amount of money to defend or otherwise address the claim. Any litigation, even where a claim is without merit, could result in substantial costs and diversion of resources. Accordingly, the resolution or adjudication of such disputes, even those encountered in the ordinary course of business, could have a material adverse effect on our business, consolidated financial condition and results of operations.

 

We may be required to recognize additional impairment charges.

 

Pursuant to U.S. GAAP, we are required to evaluate for impairment periodically and when events or changes in circumstances indicate that the carrying value of property, plant and equipment may not be recoverable. During 2017, the Company identified a triggering event related to property, plant and equipment in its U.S. segment asset group and recorded an impairment loss related to the U.S. segment of $1.0 million. In addition, during 2017, the Company recorded an impairment loss of $0.6 million related predominantly to machinery and equipment in the China segment. These assets were identified as part of the Company’s assessment of its capital requirements and capabilities during the year. Disruptions and reductions to our business, unexpected significant declines in the operating results, divestitures and enterprise value declines may result in future impairment charges to property, plant and equipment. Any future impairment charge could substantially affect our reported results during those periods. 

 

Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations. Additionally, changes in securities laws and regulations could increase our operating costs.

 

We prepare our financial statements in conformity with U.S. GAAP.  A change in these policies can have a significant effect on our reported results and may affect our reporting of transactions that are completed before a change is announced. Changes to those rules or questions as to how we interpret or implement them may have a material adverse effect on our reported financial results or on the way we conduct business. For example, in May 2014 the FASB issued a new standard (ASC 606) which will change the way we recognize revenue and expand the disclosure requirements for revenue arrangements. We adopted the requirements of this new standard on January 1, 2018. The Company has determined that the new standard will change the timing of revenue recognition for a significant portion of its business, whereby a significant portion of its revenue will be recognized over a period of time as opposed to a point in time.  This results in recognizing revenue earlier as revenue will be recognized as obligations are performed and costs are incurred.  Under the accounting rules in place until December 31, 2017, the Company recognized revenue when units were shipped. This change in the standard could have a material impact to the Company’s balance sheet, primarily related to a reduction in finished goods and work-in-process inventories and an increase in unbilled contract assets. New controls will be needed to comply with such changes and we may fail to adequately implement the needed changes. See Note 3 of the Notes to the Consolidated Financial Statements of this Report for additional information relating to our adoption of the new revenue recognition standard.

 

We review our internal controls over financial reporting annually. In doing so, we may identify deficiencies in those controls. A material weakness or deficiency in our internal controls could increase the likelihood that a material misstatement or lack of disclosure within the annual or interim financial statements will not be prevented or detected. Adverse publicity related to the disclosure of a material weakness or deficiency in internal controls over financial reporting could have a negative impact on our reputation, business and stock price.

 

The Company has experienced a significant reduction in revenues in 2016 and 2017, which has negatively impacted our cash flows from operations and liquidity and may continue to impact our cash flows from operations and liquidity during future periods.

 

 The Company has experienced significant reductions in revenue in 2016 and 2017 when compared to prior periods that has impacted cash flows from operations. The Company incurred a net loss in 2016 of $0.2 million and a net loss in 2017 of $7.8 million. Revenues have declined due to the loss of customers that represented a large concentration of the Company’s business. The Company believes this loss of customers is largely due to competitive pressures from larger organizations, which may persist during future periods. This decline in revenues has directly impacted the Company’s gross profit and its ability to generate cash flows from operations. Additional declines in the Company’s revenues during future periods resulting from this challenging business environment may continue to negatively impact the Company’s ability to generate cash flows from operations and to satisfy its liquidity needs.

 

19

 

 

 During 2017, the Company included within selling, general and administrative expenses an additional provision for bad debt expenses of $0.7 million that predominately relates to amounts owed by one customer, which management does not believe are collectible. In addition, during 2017, the Company increased the provision for inventory obsolescence by approximately $0.3 million due primarily to an identified collection risk related to aged inventory for a small number of customers. The incurrence by the Company of additional bad debt expense or the need to increase the provision of inventory obsolescence during future periods could negatively impact our cash flows from operations and liquidity.

 

We depend on our executive officers and skilled management personnel.

 

Our success depends to a large extent upon the continued services of our executive officers and other key employees. Generally, our employees are not bound by employment or non-competition agreements, and we cannot assure you that we will retain our executive officers and other key employees. We could be seriously harmed by the loss of any of our executive officers or other key employees. We will need to recruit and retain skilled management personnel, and if we are not able to do so, our business could be harmed.

 

 

RISKS RELATED TO OUR CAPITAL STRUCTURE

 

Our indebtedness could adversely affect our financial health and severely limit our ability to plan for or respond to changes in our business.

 

The Company borrows money under a Revolving Credit and Security Agreement with PNC Bank, National Association (“PNC”) which governs the PNC Revolving Credit Facility and a Long-Term Debt Facility (“PNC Facilities”). The PNC Facilities have a term ending on January 2, 2021. Advances made under the PNC Revolving Credit Facility bear interest at the U.S. base rate plus 0.75%. The applicable interest rate for the Long-Term Debt Facility is U.S. base rate plus 1.25%. The base commercial lending rate should approximate prime rate.  

 

Our debt outstanding under the PNC Facilities could have adverse consequences for our business, including:

 

 

We will be more vulnerable to adverse general economic conditions.

 

We will be required to dedicate a substantial portion of our cash flow from operations to repayment of debt, limiting the availability of cash for other purposes.

 

We may have difficulty obtaining financing in the future for working capital, capital expenditures, acquisitions, general corporate purposes or other purposes.

 

We may have limited flexibility in planning for, or reacting to, changes in our business and industry.

 

We could be limited in our borrowing of additional funds and making strategic investments by restrictive covenants and the borrowing base formula in our credit arrangements.

 

We may fail to comply with covenants under our PNC Facilities. The financial covenants require the Company to maintain a minimum EBITDA for the twelve months ended July 2, 2017 and the three months ended October 1, 2017. Subsequent thereafter, the financial covenant relating to a minimum consolidated fixed charge coverage ratio is in effect for the three months ended December 31, 2017, six months ended April 1, 2018, nine months ended July 1, 2018, twelve months ended September 30, 2018 and thereafter on a rolling twelve month basis until January 2, 2021. The Company is in compliance with the financial covenants included in the PNC Facilities as of December 31, 2017.

 

 

Market conditions have been difficult to predict and there is no assurance that the Company will meet these covenants. A failure to comply with the covenants could result in an event of default. If an event of default occurs and is not cured or waived, it could result in all amounts outstanding, together with accrued interest, becoming immediately due and payable unless the Company obtains a waiver from the lender.

 

Our leverage and restrictions contained in the PNC Facilities may materially adversely affect our ability to finance our future operations or capital needs or to engage in other business activities. In addition, our ability to pay principal and interest on our indebtedness and to satisfy our other obligations will depend upon our future operating performance, which will be affected by prevailing economic conditions and financial, business and other factors, certain of which are beyond our control.

 

We face significant restrictions on our ability to operate under the terms of our PNC Facilities.

 

The terms of our PNC Facilities generally restrict, among other things, our ability to incur additional indebtedness, complete acquisitions, make certain investments, pay dividends or make certain other restricted payments, consummate certain asset sales, make capital expenditures, enter into certain transactions with affiliates, merge, consolidate or sell, assign, transfer, lease, convey or otherwise dispose of our assets (other than in the ordinary course of business). The PNC Facilities also have a borrowing base formula that limits our ability to borrow based on the characteristics, including geographic location of our accounts receivable and inventory. Substantially all of our assets and those of our subsidiaries are pledged as security under our PNC Facilities.

 

20

 

 

If we are not able to comply with these covenants and requirements, PNC has the right to demand accelerated payment and we would have to seek alternative sources of financing, which may not be available, or be available on acceptable terms. In addition, customers may lose confidence in us and reduce or eliminate their orders with us, which may have an adverse impact on our business, financial condition and results of operations. If our borrowing base is diminished we may not have sufficient access to capital to finance operations or capital needs.

 

 

RISKS RELATED TO TAX LOSS UTILIZATION AND TAX REGULATION

 

Our ability to recognize tax benefits on our existing U.S. net operating loss position may be limited.

 

We have generated substantial loss carryforwards and other tax assets for U.S. tax purposes that can be used to reduce our future federal income tax obligations. Our ability to fully use these tax assets will be adversely affected if we have an “ownership change” within the meaning of Section 382 of the Internal Revenue Code (“IRC”). An ownership change is generally defined as a greater than 50 percentage point increase in equity ownership by “five-percent shareholders” (as that term is defined for purposes of Section 382 of the IRC) in a rolling three-year period.

 

At our 2017 Annual Meeting of Stockholders, the Company ratified the extension of the SMTC Corporation Tax Benefits Preservation Plan, (the “Plan”) for an additional three year period in order to protect our ability to utilize our net operating losses (“NOLs”) and other tax assets from an “ownership change” under U.S. federal income tax rules. However, there is no guarantee that the Plan will be effective in protecting our NOLs and other tax assets.

 

In the past, the Company has had historical net operating losses expire unutilized. If the Company continues to be unable to generate sufficient taxable income, these losses will continue to expire unutilized and we may not be able to recognize the tax benefits that could arise from such tax losses.

 

There may be adverse impact resulting from government tax reform on the Company's tax returns and consolidated financial statements.

 

The Company operates in various foreign jurisdictions and has substantial tax operating loss carryforwards and so expects this tax reform and potential future tax reform could have substantial impact on the Company’s tax filings and consolidated financial statements related to its income tax expense (recovery) and deferred tax assets (liabilities) and corresponding disclosures.

 

 

There may be adverse consequences resulting from future governmental tax audits of the Company's tax returns.

 

The Company has taken various tax positions in determining its tax liabilities and the related expense. It is possible that future tax audits or changes in tax regulation may require the Company to change its prior period tax returns and also to incur additional costs. This may negatively affect future period results. 

 

21

 

 

RISKS RELATED TO SECURITIES REGULATIONS AND LAWS

 

Changes in the securities laws and regulations have increased, and may continue to increase, our costs and any future changes would likely increase our costs.

 

The Sarbanes-Oxley Act of 2002, as well as related rules promulgated by the SEC and NASDAQ, required changes in some of our corporate governance, securities disclosure and compliance practices. Compliance with these rules has increased our legal and financial accounting costs for several years following the announcement and effectiveness of these new rules. While these costs are no longer increasing, they may in fact increase in the future. In addition, given turmoil in the securities and credit markets in 2008, as well as the global economy, many U.S. and international governmental, regulatory and supervisory authorities including, but not limited to, the SEC and NASDAQ, enacted additional changes in their laws, regulations and rules (such as the Dodd-Frank Wall Street Reform and Consumer Protection Act) and may be contemplating additional changes. These changes, and any such future changes, may cause our legal and financial accounting costs to increase.

 

 

RISKS RELATED TO ASSESSMENT OF INTERNAL CONTROL

 

We may in the future identify a material weakness in our internal control over financial reporting which, if not remediated, could result in material misstatements in our consolidated financial statements.

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(f) under the Securities Exchange Act.

    

We cannot assure you that significant deficiencies or material weaknesses in our internal control over financial reporting will not be identified in the future. The existence of a significant deficiency or material weakness could result in errors in our financial statements that could in turn result in a restatement of the consolidated financial statements, cause us to fail to meet our reporting obligations or cause lenders, suppliers, customers and investors to lose confidence in our reported financial information. Any combination of the above could lead to harmful effects on our business and a decline in our stock price.

 

22

 

 

Item 2.

Properties

 

We conduct our operations within approximately 433,000 square feet of building space. We believe our facilities are currently adequate for our operating needs and provide capacity for future volume growth. Our principal service at all locations is assembly of electronic components, with the exception of the Chihuahua facility where we also manufacture precision enclosures, and our Markham, Canada facility which serves as the principal executive office. Our operating facilities are as follows:

 

Location

 

Approx.
Square

Footage 

 

Leased/Owned 

Fremont, California

 

 

67,000

 

Leased

Chihuahua, Mexico

 

 

216,000

 

Owned

Chang An (Dongguan), China

 

 

150,000

 

Leased

 

The principal executive office of SMTC is located at 7050 Woodbine Ave. Suite 300, Markham, Ontario, Canada L3R 4G8, which is a leased facility.

 

Item 3.

Legal Proceedings

 

We are a party to various legal actions arising in the ordinary course of our business. At this time, we believe that the resolution of these legal actions will not have a material adverse effect on our financial position, results of operations or cash flows.

 

Item 4.

Mine Safety Disclosures

 

Not Applicable.

 

23

 

 

PART II

 

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Market Information

 

Our common stock trades on the NASDAQ Stock Market under the symbol “SMTX.” The following table shows the high and low sales price for our common stock as reported by the NASDAQ Stock Market for each quarter in the fiscal years ended December 31, 2017 (“2017”) and January 1, 2017 (“2016”).

 

   

Common Stock Price

 
   

2017

   

2016

 
   

High

   

Low

   

High

   

Low

 

First Quarter

  $ 1.56     $ 1.18     $ 1.53     $ 1.14  

Second Quarter

    1.38       1.10       1.68       1.33  

Third Quarter

    1.40       1.12       1.85       1.30  

Fourth Quarter

    1.94       1.30       1.68       1.23  

 

Stock Performance Graph

 

The following graph sets forth the Company’s total cumulative stockholder return as compared to the NASDAQ Composite Index and to a peer group chosen by the Company for 2017 (the “Peer Group”). The Peer Group is comprised of the following companies: IEC Electronics Corp., Key Tronic Corp., Nortech Systems Inc., Sigmatron International Inc., Sparton Corp. and Sypris Solutions Inc.

 

24

 

 

The total stockholder return assumes $100 invested on January 1, 2013 in SMTC’s common stock or December 31, 2012 in the NASDAQ Composite Index and the Peer Group of companies that are, (i) publicly traded, and (ii) mid or large tier providers of advanced electronics manufacturing services. Total shareholder return assumes reinvestment of dividends.

 

 

 

25

 

 

Holders 

 

As of March 2, 2018, there were approximately 94 holders of record of the Company’s common stock.

  

Dividends

 

The Company has never declared a cash dividend on its common stock. Our Board of Directors has no present intention to authorize the payment of dividends on our common stock in the foreseeable future. It is the present policy of the Company to retain earnings, if any, to provide for growth and working capital needs.

 

26

 

 

Item 6.

 Selected Financial Data

 

The data set forth below should be read in conjunction with our “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes thereto appearing elsewhere in this annual report.

 

The Company’s financial reporting year is a 52 or 53 week fiscal period, ending on the Sunday nearest December 31. Accordingly, the consolidated balance sheet, statements of operations and comprehensive loss, the consolidated statements of changes in shareholders’ equity, and consolidated statements of cash flows are reported for the periods from January 2, 2017 to December 31, 2017 (“year ended December 31, 2017”), January 4, 2016 to January 1, 2017 (“year ended January 1, 2017”), December 29, 2014 to January 3, 2016 (“year ended January 3, 2016”), December 30, 2013 to December 28, 2014 (“year ended December 28, 2014”), and December 31, 2012 to December 29, 2013 (“year ended December 29, 2013”).

 

 Selected consolidated financial data has been derived from consolidated financial statements that are prepared in accordance with US GAAP.

 

Consolidated Statements of Operations and Comprehensive Loss Data

(in USD millions except weighted average shares, which is in millions): 

 

   

Years Ended

 
   

December 31,

2017

   

January 1,

2017

   

January 3,

2016

   

December 28,

2014

   

December 29,

2013

 

Revenue

  $ 139.2     $ 167.9     $ 220.6     $ 228.5     $ 270.7  

Cost of sales

    128.4       152.8       202.9       209.6       255.5  
                                         

Gross profit

    10.8       15.1       17.7       18.9       15.2  
                                         

Selling, general and administrative expenses

    14.0       14.0       15.9       17.9       19.2  

Impairment of property, plant and equipment

    1.6                          

Loss on contingent consideration

                            0.3  

Restructuring charges (a)

    1.7       0.2             1.4       2.0  

(Gain) loss on disposal of property, plant and equipment

    (0.1 )     0.0             0.0       (0.1

)

Operating earnings (loss)

    (6.4 )     0.9       1.8       (0.4

)

    (6.2

)

Interest expense - net

    0.9       0.8       1.2       1.7       1.7  

Earnings (loss) before income taxes

    (7.3 )     0.1       0.6       (2.1

)

    (7.9

)

Income tax expense - net

    0.6       0.3       0.7       1.8       4.6  
                                         

Net loss and comprehensive loss

  $ (7.9 )   $ (0.2

)

  $ (0.1

)

  $ (3.9

)

  $ (12.5

)

                                         

Basic loss per common share

  $ (0.47 )   $ (0.01

)

  $ (0.00

)

  $ (0.24

)

  $ (0.76

)

                                         

Diluted loss per common share

  $ (0.47 )   $ (0.01

)

    (0.00

)

  $ (0.24

)

  $ (0.76

)

                                         

Weighted average number of shares outstanding

                                       

Basic

    16.8       16.5       16.4       16.4       16.4  

Diluted

    16.8       16.5       16.4       16.4       16.4  

 

  

(a)

During 2017, restructuring charges of $1.7 million were incurred related to severance charges in connection with the Company’s 2017 restructuring plan related to a global reduction in the workforce in addition to the closure of the Suzhou manufacturing facility. During 2016, restructuring charges related to one executive terminated in the Markham, Ontario office. No restructuring charges were incurred during 2015. During 2014, restructuring charges of $1.4 million were incurred related to severance charges in connection with the Company’s 2014 restructuring plan. During 2013, additional restructuring charges of $2.0 million were recorded in connection with the Company’s 2012 restructuring plan and lease exit costs.

 

27

 

 

Consolidated Balance Sheet Data and Cash Flow Data:

(in USD millions)

 

   

As at and for the Years Ended

 
                                         
                                         
   

December 31,

2017

   

January 1,

2017

   

January 3,

2016

   

December 28,

2014

   

December 29,

2013

 

Cash

  $ 5.5     $ 8.5     $ 6.9     $ 5.4     $ 3.3  

Working capital (1)

    14.5       20.0       14.0       8.9       10.8  

Total assets

    69.9       69.0       82.0       88.7       92.8  

Long-term debt and capital lease obligations

    6.1       8.3       4.2       0.9       0.5  

Shareholders’ equity

    19.1       26.5       26.3       25.8       29.4  

Capital expenditures

    1.5       2.2       2.8       3.6       4.0  

Cash flows (used in) provided by operating activities

    (8.9 )     6.9       10.9       4.9       3.4  

Cash flows (used in) provided by financing activities

    7.0       (3.2

)

    (6.7

)

    (0.9

)

    0.3  

Cash flows used in investing activities

    (1.1 )     (1.3

)

    (3.5

)

    (1.9

)

    (2.6

)

  

 

(1)

Calculated as current assets minus current liabilities. 

 

28

 

 

Item 7:

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

You should read this Management’s Discussion and Analysis of Financial Condition and Results of Operation (“MD&A”) in combination with the accompanying audited consolidated financial statements and the accompanying notes to the consolidated financial statements prepared in accordance with U.S. GAAP included within this annual report.

 

This MD&A contains discussion in thousands of U.S. dollars unless specifically stated otherwise.

 

Overview

 

SMTC is a provider of end-to-end electronics manufacturing services (“EMS”), including product design and engineering services, printed circuit board assembly (“PCBA”), production, enclosure, cable assembly, precision metal fabrication, systems integration and comprehensive testing services, configuration to order (“CTO”), build to order (“BTO”) and direct order fulfillment (“DOF”). SMTC has manufacturing and other facilities in the United States, Canada, Mexico, and China, with approximately 1,171 employees as of December 31, 2017 of which 1,110 are full-time employees. SMTC’s services extend over the entire electronic product life cycle from new product development and new product introduction (“NPI”) through to growth, maturity and end of life phases. SMTC offers fully integrated contract manufacturing services to global original equipment manufacturers (“OEMs”), and technology companies primarily within the industrial, networking and communications, power and energy and medical market sectors.

 

Developments in the Year Ended December 31, 2017

 

Total revenue decreased by $28.7 million or 17.1% in 2017 compared to 2016. The reduction was primarily related to one network and communications customer serviced out of China that transferred a portion of its business to other contract manufacturers representing a reduction of $18.6 million when compared to 2016. Revenues further decreased as a result of one network and communications customer’s product reaching end of life previously serviced out of Mexico representing an additional reduction in revenue of $5.6 million. One long standing industrial customer serviced out of Mexico had a decrease in volume resulting in a revenue reduction of $10.4 million. This was partially offset by volume increases with two long standing customers in the industrial sector serviced out of Mexico which represented an increase of $7.5 million. There was new customer revenue comprised primarily by one customer serviced in Mexico in the power and energy sector representing additional revenue of $4.5 million and another customer in the medical sector representing additional revenue of $2.2 million.

 

Operating earnings declined by $7.3 million from $0.9 million operating earnings in 2016 to a $6.4 million operating loss in 2017 due to reduced revenues in 2017, in addition to certain other 2017 charges not incurred in the prior year including an impairment loss and restructuring charges. The Company recorded a $1.6 million impairment loss related to property, plant and equipment. During 2017 the Company announced a global restructuring plan which included the closure of its Suzhou, China facility. This restructuring plan resulted in the Company recording a $1.7 million restructuring expense. In 2016, the restructuring expense was $0.2 million. During 2017, the Company also recorded provisions on both excess and obsolete inventory and aged receivables of $0.2 million and $0.7 million, respectively. During 2016, a reversal of the provisions on aged receivables and excess and obsolete inventory was $0.1 million and $0.2 million, respectively.

   

Adjusted EBITDA decreased to $(1.5) million in 2017 from $4.7 million in 2016. Adjusted EBITDA as a percentage of revenue decreased to (1.1%) in 2017 compared to 2.8% in 2016. The reduction in Adjusted EBITDA, was primarily driven by the reduced revenue, ability to cover our fixed costs prior to the global restructuring plan and the additional provisions and impairment charges noted above that were not incurred in the prior year. For additional information and a reconciliation of Adjusted EBITDA, see “EBITDA and Adjusted EBITDA Reconciliation” below.    

 

29

 

 

Results of Operations  

 

The following table sets forth certain operating data expressed as a percentage of revenue for the years presented:   

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Revenue

    100.0

%

    100.0

%

    100.0

%

Cost of sales

    92.2       91.0       92.0  

Gross profit

    7.8       9.0       8.0  

Selling, general and administrative expenses

    10.1       8.3       7.2  

Impairment of property, plant and equipment

    1.2              

Restructuring charges

    1.2       0.1        

Gain on disposal of property, plant and equipment

    (0.1 )            

Operating earnings (loss)

    (4.6 )     0.6       0.8  

Interest expense

    0.7       0.5       0.5  

Earnings (loss) before income taxes

    (5.3 )     0.1       0.3  

Income tax expense

                       

Current

    0.5       0.1       0.3  

Deferred

    (0.1 )     0.1       0.0  
      0.4       0.2       0.3  

Net loss

    (5.7

) %

    (0.1

) %

    (0.0

)%

 

Year Ended December 31, 2017 compared to the Year Ended January 1, 2017

  

Revenue  (in millions)

 

Industry Sector

Year ended

December 31,

 2017

Year ended

January 1,

 2017

Change

 

 

$ 

 

%

 

$

 

%

 

 $

 

%

Industrial

 

63.4

 

45.5

 

68.7

 

40.9

 

(2.9)

 

(4.2)

Networking and Communications

 

46.4

 

33.3

 

66.9

 

39.8

 

(20.7)

 

(30.9)

Power and Energy

 

10.9

 

7.8

 

8.8

 

5.3

 

2.1

 

23.9

Medical

 

18.5

 

13.4

 

23.5

 

14.0

 

(7.2)

 

(30.6)

Total

 

139.2

 

100

 

167.9

 

100

 

(28.7)

 

(17.1)

 

 

During 2017, the Company recorded approximately $2.8 million of sales of raw materials inventory to customers, which carried limited margin, compared to $7.0 million in 2016. The Company’s contract terms are structured such that it purchases raw materials based on a customer’s purchase orders. To the extent a customer subsequently requests that an order be changed, the customer is generally contractually obligated to purchase the original on-order raw material at cost.

  

Due to changes in market conditions, the life cycle of products, the nature of specific programs and other factors, revenues from any particular customer typically vary from year to year. The Company’s ten largest customers represented 72.5% of revenue in 2017, compared to 76.2% in 2016. Revenue from our two largest customers during 2017 was $16.6 million and $16.5 million, both representing 11.9% of revenue. This compared to revenue from our two largest customers during 2016 of $26.9 million and $20.7 million, representing 16.0% and 12.3% of revenue, respectively. No other customer represented more than 10% of revenue in either year.

 

      In addition to tracking our revenues based on industry sector, the Company also monitors revenue (as well as associated site contribution margin) based on the geographic location of our operations, which are Mexico, China and the U.S. This is consistent with how we report our segmented information, as set out in Note 10 to our consolidated financial statements. 

  

During 2017, 71.5% of our revenue was attributable to our operations in Mexico, 13.4% in China, and 15.1% in the U.S. During 2016, 60.8% of our revenue was attributable to our operations in Mexico, 26.5% in China, and 12.7% in the U.S.

 

30

 

 

Gross Profit

 

Gross profit decreased to $10.9 million in 2017 from $15.1 million in 2016. Gross margin percentage decreased to 7.8% in 2017 compared to 9.0% in the prior year. When excluding the impact of the unrealized foreign exchange gains on unsettled forward contracts, the adjusted gross margin percentage decreased to 7.1% in 2017 down from 8.5% in the prior year. This decrease in gross profit was primarily the result of reduced revenues, impacting the Company’s ability to cover variable and fixed overhead costs in addition to product mix resulting in reduced margins. In addition, there was a provision for excess and obsolete inventory of $0.2 million during 2017, which reduced gross margin.

 

The Company calculates an adjusted gross profit amount as we consider gross margins exclusive of such unrealized foreign exchange gains or losses on unsettled forward foreign exchange contracts to be a meaningful measure as it is non-cash and management does not consider the mark to market valuation reflective of operating performance in the current period. Below is the reconciliation from the financial statement presentation of gross profit to the non-GAAP measure of adjusted gross profit:

 

   

Year ended

December 31, 2017

   

Year ended

January 1, 2017

 

Gross profit

  $ 10,851     $ 15,027  

Add (deduct):

               
                 

Unrealized foreign exchange gain on unsettled forward foreign exchange contracts

    (918 )     (831

)

Adjusted gross profit

  $ 9,933     $ 14,196  
                 

Adjusted gross profit percentage

    7.1

%

    8.5 %

 

 

The Company entered into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to forecasted Canadian dollar and Mexican peso expenditures. These contracts are effective as hedges from an economic perspective, but do not meet the requirements for hedge accounting under ASC Topic 815 “Derivatives and Hedging”. Accordingly, changes in the fair value of these contracts are recognized in earnings in the consolidated statement of operations and comprehensive loss. Included in cost of sales in 2017 was a realized loss of $0.1 million compared to a realized loss of $2.8 million in 2016. In 2017, as a result of revaluing the outstanding forward contracts to fair value, an unrealized gain of $0.9 million was recorded compared to an unrealized gain of $0.8 million in 2016, which was included in cost of sales.

 

   

December 31,

2017

   

January 1,

2017

 

Average USD:CAD contract rate

    1.29       1.34  

Average USD:CAD mark-to-market rate

    1.26       1.34  

Average USD:PESO contract rate

    18.69       18.47  

Average USD:PESO mark-to-market rate

    20.11       21.20  

  

31

 

 

EBITDA and Adjusted EBITDA Reconciliation

 

EBITDA and Adjusted EBITDA, non-GAAP financial measures, are defined as earnings before interest, taxes, depreciation and amortization, with Adjusted EBITDA also excluding restructuring charges, stock based compensation and unrealized foreign exchange gains and losses on unsettled forward foreign exchange contracts. Management presents EBITDA and Adjusted EBITDA, as it is utilized by management to monitor performance against budget as well as compliance with bank covenants. We also believe EBITDA and Adjusted EBITDA provide useful information to investors in understanding and evaluating our operating results in the same manner as management.

 

  

Below is the reconciliation of net loss, the closest GAAP measure, to EBITDA and Adjusted EBITDA.

 

   

Year ended

December 31, 2017

   

Year ended

January 1, 2017

 

Net loss

  $ (7,845 )   $ (232

)

Reconciling items:

               
                 

Depreciation

    3,588       4,110  

Interest

    903       788  

Income taxes

    560       287  

EBITDA

  $ (2,794 )   $ 4,953  
                 

Additional reconciling items:

               
                 

Restructuring charges

    1,732       176  

Stock based compensation

    432       423  

Unrealized foreign exchange gain on unsettled forward foreign exchange contracts

    (918 )     (831

)

Adjusted EBITDA

  $ (1,548 )   $ 4,721  

   

The reduction in Adjusted EBITDA was due primarily to the decrease in revenue in 2017 by $28.7 million, or 17.1%, from 2016. The reduction in revenue impacted the Company’s ability to cover its fixed costs prior to the global restructuring plan, effectively resulting in negative Adjusted EBITDA of ($0.3M) in the first quarter of 2017 and ($3.6M) in the second quarter of 2017. Subsequent to the global restructuring plan, positive Adjusted EBITDA of $1.1M was earned in the third quarter of 2017 and $1.2M in the fourth quarter of 2017. Adjusted EBITDA was also reduced when compared to the prior year as a result of provisions of $0.9 million related to excess and obsolete inventory as well as aged receivables, and impairment charges of $1.6 million expensed in 2017 on property, plant and equipment that were not incurred in the prior year.

  

Selling, General & Administrative Expenses

 

Selling, general and administrative expenses were $14.0 million in both 2017 and 2016. However, selling, general and administrative expenses increased to 10.1% of revenue in 2017 up from 8.3% of revenue in 2016. The Company had higher administrative costs relative to the reduced revenue levels in 2017, until the global restructuring plan was implemented in the second quarter of 2017, resulting in administrative cost reductions. Professional services, including legal and audit fees increased in 2017 compared to 2016.

 

Restructuring Charges

 

In accordance with the restructuring plan effected in 2017, restructuring charges of $1.7 million were incurred related to the reduction of 49 full-time equivalents (“FTEs”) in Mexico, 102 FTEs in China, 22 FTEs in the U.S., and 10 FTEs in Canada. Additional charges were incurred related to the closure of the Suzhou facility, including ongoing administrative staff charges to close the facility. The closure of the Suzhou facility was initiated in the second quarter of 2017 and was substantially completed by the end of 2017. As at December 31, 2017, a restructuring accrual balance of $0.1 million is expected to be paid by the first quarter of 2018. In 2016, $0.2 million of restructuring charges were incurred due to a termination of one executive in the Markham, Canada office location.

 

32

 

 

Interest Expense

 

Interest expense increased to $0.9 million in 2017 compared to $0.8 million in 2016. The increase was primarily the result of a higher average debt balance in 2017 compared to 2016 in addition to an increase in interest rates on our PNC Facilities. The weighted average interest rates with respect to the debt on our PNC Facilities was 4.9% for 2017 and 4.2% for 2016.  

 

Income Tax Expense

 

The net tax expense for 2017 of $0.6 million related to taxes incurred in Mexico due to profits in that jurisdiction in addition to minimum taxes and state taxes in the U.S. The current income tax expense was partially offset by a $0.1 million deferred tax recovery recorded related to temporary differences on assets and liabilities in Mexico, which have resulted in an increase to the corresponding deferred tax asset.

 

On December 22, 2017, the Tax Cuts and Jobs Act (“TCJA”) was enacted, which includes a broad range of tax reform proposals, with many provisions significantly differing from current U.S. tax law. Management has considered the impact of these provisions, including a decrease in the federal corporate income tax rate, from 35% to 21% for years beginning after December 31, 2017, substantially reducing the value of the Company's deferred tax assets. The Company has recorded a corresponding reduction to its deferred tax assets of $8.0 million as at December 31, 2017. The reduction in the Company's deferred tax assets is fully offset by a corresponding reduction to the valuation allowance.

 

33

 

 

Year ended January 1, 2017 Compared to the Year Ended January 3, 2016

 

Revenue  (in millions)

 

Industry Sector

 

Year ended

January 1,

2017

 

 

Year ended

January 3,

2016

 

 

Change

 

 

 

 

$

 

 

 

%

 

 

 

$ 

 

 

 

%

 

 

 

 $

 

 

 

%

 

Industrial

 

 

68.7

 

 

 

40.9

 

 

 

103.5

 

 

 

46.9

 

 

 

(34.8)

 

 

 

(33.6)

 

Networking and Communications

 

 

66.9

 

 

 

39.8

 

 

 

86.6

 

 

 

39.3

 

 

 

(19.7)

 

 

 

(22.7)

 

Power and Energy

 

 

8.8

 

 

 

5.3

 

 

 

18.2

 

 

 

8.2

 

 

 

(9.4)

 

 

 

(51.6)

 

Medical

 

 

23.5

 

 

 

14.0

 

 

 

12.3

 

 

 

5.6

 

 

 

11.2

 

 

 

91.1

 

Total

 

 

167.9

 

 

 

100

 

 

 

220.6

 

 

 

100

 

 

 

(52.7)

 

 

 

(23.9)

 

 

During 2016, the Company recorded approximately $7.0 million of sales of raw materials inventory to customers, which carried limited margin, compared to $5.5 million in 2015. The Company’s contract terms are structured such that it purchases raw materials based on a customer’s purchase orders. To the extent a customer subsequently requests that an order be changed, the customer is generally contractually obligated to purchase the original on-order raw material at cost.

  

Due to changes in market conditions, the life cycle of products, the nature of specific programs and other factors, revenues from a particular customer typically vary from year to year. The Company’s ten largest customers represented 76.2% of revenue in 2016, compared to 80.4% in 2015. Revenue from our two largest customers during 2016 was $26.9 million and $20.7 million, representing 16.0% and 12.3% of revenue, respectively. This compared to revenue from our two largest customers during 2015 of $29.5 million and $24.1 million, representing 13.4% and 10.9% of revenue, respectively. No other customer represented more than 10% of revenue in either year.

 

      In addition to tracking our revenues based on industry sector, the Company also monitors revenue (as well as associated site contribution margin) based on the location of our operations, which are Mexico, China and the U.S. This is consistent with how we report our segmented information, as set out in Note 10 to our consolidated financial statements. 

  

During 2016, 60.8% of our revenue was attributable to our operations in Mexico, 26.5% in China, and 12.7% in the U.S. During 2015, 64.5% of our revenue was attributable to our operations in Mexico, 20.6% in China, and 14.9% in the U.S.

  

Gross Profit

 

Gross profit decreased to $15.1 million in 2016 from $17.7 million in 2015. Gross margin percentage increased to 9.0% in 2016 compared to 8.0% in the prior year. When excluding the impact of the unrealized foreign exchange gains on unsettled forward contracts, the adjusted gross margin percentage increased to 8.5% in 2016 up from 7.8% in the prior year. The decrease in gross profit was primarily the result of reduced revenues, impacting the Company’s ability to cover fixed overhead costs offset by increased margins due to product mix, decreased labor and variable costs. Included in fixed costs for 2016 was additional rent of $0.2 million related to the new Fremont location in California during the fourth quarter of 2016 while the Company was still incurring rent at the prior location for the duration of that quarter.

 

34

 

 

The Company calculates an adjusted gross profit amount as we consider gross margins exclusive of such unrealized foreign exchange gains or losses on unsettled forward foreign exchange contracts to be a meaningful measure as it is non-cash and management does not consider the mark to market valuation reflective of operating performance in the current period. Below is the reconciliation from the financial statement presentation of gross profit to the non-GAAP measure of adjusted gross profit:

 

   

Year ended

January 1, 2017

   

Year ended

January 3,

2016

 

Gross profit

  $ 15,027     $ 17,717  

Add (deduct):

               
                 

Unrealized foreign exchange (gain) loss on unsettled forward foreign exchange contracts

    (831 )     (616

)

Adjusted gross profit

  $ 14,196     $ 17,101  

 

 

The Company entered into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to forecasted Canadian dollar and Mexican peso expenditures. These contracts are effective as hedges from an economic perspective, but do not meet the requirements for hedge accounting under ASC Topic 815 “Derivatives and Hedging”. Accordingly, changes in the fair value of these contracts are recognized in earnings in the consolidated statement of operations and comprehensive loss. Included in cost of sales in 2016 was a realized loss of $2.8 million compared to a realized loss of $4.4 million in 2015. In 2016, as a result of revaluing the outstanding forward contracts to fair value, an unrealized gain of $0.8 million was recorded compared to an unrealized gain of $0.6 million in 2015, which was included in cost of sales.

 

   

January 1,

2017

   

January 3,

2016

 

Average USD:CAD contract rate

    1.34       1.26  

Average USD:CAD mark-to-market rate

    1.34       1.38  

Average USD:PESO contract rate

    18.47       15.88  

Average USD:PESO mark-to-market rate

    21.20       17.47  

 

35

 

 

EBITDA and Adjusted EBITDA Reconciliation

 

EBITDA and Adjusted EBITDA, non-GAAP financial measures, are defined as earnings before interest, taxes, depreciation and amortization, with Adjusted EBITDA also excluding restructuring charges, stock based compensation and unrealized foreign exchange gains and losses on unsettled forward foreign exchange contracts. Management presents EBITDA and Adjusted EBITDA, as it is utilized by management to monitor performance against budget as well as compliance with bank covenants. We also believe EBITDA and Adjusted EBITDA provide useful information to investors in understanding and evaluating our operating results in the same manner as management.

 

  

Below is the reconciliation of net loss, the closest GAAP measure, to EBITDA and Adjusted EBITDA.

 

   

Year ended

January 1, 2017

   

Year ended

January 3,

2016

 

Net loss

  $ (232 )   $ (4

)

Reconciling items:

               
                 

Depreciation

    4,110       3,967  

Interest

    788       1,183  

Income taxes

    287       673  

EBITDA

  $ 4,953     $ 5,819  
                 

Additional reconciling items:

               
                 

Restructuring charges

    176        

Stock based compensation

    423       510  

Unrealized foreign exchange (gain) loss on unsettled forward foreign exchange contracts

    (831 )     (616

)

Adjusted EBITDA

  $ 4,721     $ 5,713  

   

 

Revenue decreased in 2016 by $52.7 million, or 23.9% from 2015, resulting in a corresponding EBITDA decrease to $5.0 million in 2016 from $5.8 million in 2015. Adjusted EBITDA decreased to $4.7 million in 2016 from $5.7 million in 2015. However, Adjusted EBITDA as a percentage of revenue increased to 2.8% in 2016 compared to 2.6% in 2015. The reduction in EBITDA, was primarily driven by the reduced revenue which was offset by improved gross margins in 2016 as compared to 2015 and reduced selling, general and administrative expenses compared to 2015.

 

The Company entered into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to the Mexican peso and Canadian dollar expenditures. The Company incurred foreign exchange losses from the settlement of these contracts of $2.8 million in 2016 and $4.4 million in 2015.

 

Selling, General & Administrative Expenses

 

Selling, general and administrative expenses decreased to $14.0 million, or 8.3% of revenue, in 2016 down from $15.9 million, or 7.2% of revenue, in 2015. The decrease in selling, general and administrative expenses was due to reduced administrative headcount, variable compensation, business trip expenses and professional services, which included legal audit related services. Legal and audit related services of $0.6 million were incurred in 2015 due to the due diligence costs related to the previously disclosed mergers and acquisitions strategy. No such costs were incurred in 2016. Sales and marketing expenses were also reduced, which included commission expenses. The reduced selling, general and administrative expenses were partially offset in 2016 by expenses of $0.4 million pertaining to office move costs.

 

Restructuring Charges

 

Restructuring charges of $0.2 million were incurred in 2016 related to a termination of one executive in the Markham, Canada office location. No restructuring charges were incurred in 2015.

 

36

 

 

Interest Expense

 

Interest expense decreased to $0.8 million in 2016 compared to $1.2 million in 2015. The decrease was primarily the result of a lower average debt balance in 2016 compared to 2015 in addition to a reduction in interest rates on our PNC Facilities. The weighted average interest rates with respect to the debt on our PNC Facilities were 4.2% for 2016 and 4.3% for 2015.

 

Income Tax Expense

 

The net tax expense for 2016 of $0.3 million related to $0.5 million of taxes incurred in Mexico due to profits in that jurisdiction in addition to minimum and state taxes in the U.S. The current income tax expense was partially offset by the recognition of tax benefits of $0.3 million associated with uncertain tax positions. In addition, a $0.1 million deferred tax expense was recorded related to temporary differences on assets and liabilities in Mexico, which have resulted in a reduction to the corresponding deferred tax asset. In 2015, $0.7 million related to $0.6 million of taxes in Mexico and China due to profits in these jurisdictions in addition to minimum and state taxes in the U.S.

 

37

 

 

Off-Balance Sheet Arrangements

 

          As of December 31, 2017 and January 1, 2017, we did not have any material off-balance sheet arrangements (as defined in Item 303(a)(4)(ii) of Regulation S-K).

 

 

Liquidity and Capital Resources

 

Our principal sources of liquidity are cash provided from operations and borrowings under the PNC Facilities, which matures on January 2, 2021. Our principal uses of cash have been to meet debt service requirements, pay down debt, invest in capital expenditures and to finance working capital requirements.  

 

The following table summarizes cash flow changes for the following periods:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Cash provided by (used in):

                       

Operating activities

  $ (8.9 )   $ 6.9     $ 10.9  

Financing activities

    7.0       (3.2

)

    (6.7

)

Investing activities

    (1.1 )     (1.3

)

    (3.5

)

(Decreased)/Increase in cash

    (3.0 )     2.4       0.7  

Cash, beginning of year

    8.5       6.1       5.4  

Cash, end of the year

  $ 5.5     $ 8.5     $ 6.1  

 

 

2017

 

Net cash used by operating activities for 2017 was $8.9 million. The use of cash was mainly driven by a net loss from operations, in part due to cash severance and other charges of $1.7 million as a result of the 2017 restructuring plan. In addition it is the result of a reduction in gross margin due to reduced revenues, lower margin product mix and the resulting impact to cover fixed costs compared to the prior year. In addition, accounts receivables in 2017 included a small number of customers with aged receivables which increased the day sales outstanding, which reduced cash provided from accounts receivable. Accounts receivable days increased to 64 days in 2017 up from 49 days in 2016. Inventory turnover increased to six times or 65 days in 2017 from seven times or 49 days in 2016. Cash used from accounts receivable and inventory was partially offset from decreased payments of accounts payable of $2.2 million due in large part to the reduction in revenue resulting in a decrease in inventory purchases when compared to 2016. In addition, accounts payable increased due to extended payment terms with some vendors, and timing of payments effectively increasing cash year over year. Accounts payable days outstanding for 2017 increased to 65 days versus 55 days for 2016 due to timing of payments.

 

As at December 31, 2017, the Company’s liquidity is comprised of $5,536 in cash on hand and $5,295 of funds available to borrow under the PNC Revolving Credit Facility. As at January 1, 2017, the Company’s liquidity is comprised of $8,503 in cash on hand and $7,377 of funds available to borrow under the PNC Revolving Credit Facility.

 

Net cash provided by financing activities during 2017 was $7.0 million, consisting of cash advanced on the PNC revolver of $9.5 million partially offset by payments on the PNC Long-Term Debt Facility of $2.0 million. Principal payments on capital lease obligations was $0.4 million in 2017.

 

Cash used in investing activities for 2017 of $1.1 million was due to capital expenditures of $1.5 million partially offset by the proceeds of $0.3 million on the sale of property, plant and equipment.

 

 

2016

 

Net cash provided by operating activities for 2016 was $6.9 million. The source of cash mainly resulted from working capital management, which resulted in cash provided by accounts receivable net change year over year of $7.3 million and reduced net inventory levels year over year of $5.2 million. Accounts receivable days decreased to 49 days in 2016 down from 50 days in 2015. The increase in cash generated from the net change in accounts receivable was due to reduced revenue and the timing of sales and the respective collections. Inventory turnover reduced to seven times or 52 days in 2016 from eight times or 47 days in 2015. Cash provided from accounts receivable and inventory was partially offset from increased payments of accounts payable of $8.0 million due in large part to the reduction in revenue resulting in a decrease in inventory purchases when compared to 2015. Accounts payable days outstanding for 2016 decreased to 55 days versus 56 days for 2015 due to timing of payments.

 

38

 

 

Net cash used from financing activities during 2016 was $3.2 million, consisting of cash paid on the PNC revolver of $8.0 million partially offset by the increase in the PNC Long-Term Debt Facility of $5.0 million, which resulted in a source of cash of $5.0 million. There were also principal payments of capital lease obligations of $0.6 million and proceeds from a sale and leaseback transaction of $0.5 million.

 

Cash used in investing activities for 2016 of $1.3 million which was due to capital expenditures of $2.2 million partially offset by the release of restricted cash deposits of $0.8 million, which were previously restricted in the form of a guarantee to a government agency pertaining to estimated value added taxes on imported raw materials inventory in Suzhou, China. This guarantee is no longer required. In addition, there were proceeds of $0.1 million on the sale of property, plant and equipment.

 

Capital Resources

 

The Company borrows money under a Revolving Credit and Security Agreement with PNC Bank, National Association (“PNC”) which governs the PNC Facilities. The PNC Facilities mature on January 2, 2021. Advances made under the PNC Revolving Credit Facility bear interest at the U.S. base rate plus 0.8%. The applicable interest rate for the PNC Long-Term Debt Facility is U.S. base rate plus 1.3%.The base commercial lending rate should approximate prime rate.  

 

The Revolving Credit and Security Agreement contains certain financial and non-financial covenants.

 

In May 2017, the Company entered into the Twelfth Amendment to the Revolving Credit and Security Agreement (the “Twelfth Amendment”), which amended our financial covenant requirement for the quarter ended July 1, 2017 and also adjusted the financial covenant requirements and conditions for future periods. Pursuant to the Twelfth Amendment, the Company was required to maintain a minimum EBITDA for the twelve months ended July 2, 2017 of $0.2 million and $0.2 million for the three months ended October 1, 2017. Thereafter, the financial covenant relating to a minimum consolidated fixed charge coverage ratio is in effect for the three months ended December 31, 2017 (1.00 to 1.00), six months ended April 1, 2018 (1.00 to 1.00), nine months ended July 1, 2018 (1.05 to 1.00), twelve months ended September 30, 2018 (1.00 to 1.10) and thereafter on a rolling twelve month basis until January 2, 2021.  The financial covenants also require that the Company limit unfunded capital expenditures. The Company was in compliance with these financial covenants as at December 31, 2017.

 

 

We believe that cash we expect to generate from operations, available cash and amounts available under our PNC Facilities and additional financing sources such as leasing companies will be adequate to meet our debt service requirements, capital expenditures and working capital needs at our current level of operations for the next twelve months, although no assurance can be given in this regard, particularly with respect to amounts available from lenders. We have agreed to a borrowing base formula under which the amount we are permitted to borrow under the PNC Facilities is based on our accounts receivable and inventory. Further, there can be no assurance that our business will generate sufficient cash flow from operations or that future borrowings will be available to enable us to service our indebtedness. Our future operating performance and ability to service indebtedness will be subject to future economic conditions and to financial, business and other factors, certain of which are beyond our control.

   

Accounting changes and recent accounting pronouncements

  

Recently adopted Accounting Pronouncements

 

 

In July 2015, the FASB published ASU 2015-11: Simplifying the Measurement of Inventory (Topic 330). The amendments in this update more closely align the measurement of inventory in U.S. GAAP with the measurement of inventory in International Financial Reporting Standards (IFRS). FASB has amended some of the other guidance in Topic 330 to more clearly articulate the requirements for the measurement and disclosure of inventory. However, the FASB does not intend for those clarifications to result in any changes in practice. Other than the change in the subsequent measurement guidance from the lower of cost or market to the lower of cost and net realizable value for inventory within the scope of this update, there are no other substantive changes to the guidance on measurement of inventory. For public business entities, the amendments in this update are effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. The adoption of ASU 2015-11 had no impact on the consolidated financial statements.

 

39

 

 

In November 2015, the FASB published ASU 2015-17: Income Taxes (Topic 740). The amendment requires that deferred tax assets and liabilities be classified as non-current in a classified statement of financial position. The amendments in this Update are effective for public business entities for financial statements issued for fiscal years beginning after December 15, 2016, and interim periods within those fiscal years. The adoption of ASU 2015-17 resulted in the presentation of the Company’s deferred tax assets as non-current. The deferred tax assets reported in the prior periods have been reclassified to conform to the current presentation.

 

In March 2016, the FASB published ASU 2016-09: Compensation – Stock Compensation (Topic 718). The amendment simplifies several aspects of accounting for share-based payment transactions including income tax consequences, classification of awards as either equity or liabilities, classification on the statement of cash flows and accounting for forfeitures. Some of the areas for simplification apply only to nonpublic entities. The amendments in this ASU are effective for public business entities for fiscal years beginning after December 15, 2016, and interim periods within those fiscal years. The adoption of ASU 2016-09 had no impact on the consolidated financial statements.

 

 

Recent Accounting Pronouncements  

 

 

In March 2016, the FASB published ASU 2016-08: Revenue from Contracts with Customers (Topic 606). The amendment clarifies the implementation guidance on principal versus agent considerations. In April 2016, the FASB published ASU 2016-10: Revenue from Contracts with Customers (Topic 606), which clarified application of the standard in identifying performance obligations and licensing arrangements. In May 2016, the FASB published ASU 2016-12: Revenue from Contracts with Customers (Topic 606), which included narrow-scope improvements and practical expedients. Specifically the update addresses application of collectability, presentation of sales taxes, noncash consideration, and completed contracts and contract modifications at transition. In May 2014, the FASB published ASU 2014-09: Revenue from Contracts with Customers (Topic 606), which supersedes (i) revenue recognition requirements in Topic 605 and most related industry-specific guidance, and (ii) cost guidance included in Subtopic 605-35, Revenue Recognition—Construction-Type and Production-Type Contracts, and amends existing requirements for recognition of a gain/loss on the transfer of nonfinancial assets that are not in a contract with a customer (for example, assets within the scope of Topic 360, Property, Plant, and Equipment, and intangible assets within the scope of Topic 350, Intangibles—Goodwill and Other) to be consistent with the new requirements. In August 2015, the FASB published ASU 2015-14 Topic 606 which effectively postponed the effective adoption requirement by one year such that the standard is effective for years beginning after December 15, 2017 including interim periods with those years.

 

We have evaluated and performed an analysis of the new revenue standard in relation to our customer contracts and considered the potential impact on the timing of revenue recognition.  The Company has determined that the new revenue standard will primarily result in a change to the timing of the Company’s revenue recognition policy for our manufacturing services to “over time” model as products are manufactured as opposed to a “point in time” model upon delivery (which reflects the Company’s current revenue recognition policy).  The Company has determined the transitional adjustment upon adoption, will be to recognize contract assets for unbilled revenue with a corresponding reduction in finished goods and work-in-process inventory. The Company estimates that the transitional adjustment may be material, however management has not quantified the final amount of this adjustment.  The Company has revenue for other goods and services that will continue to be recognized at a point in time, upon transfer of control of the product to the customer (i.e., effectively no change to current revenue recognition policy).  We are planning a modified retrospective adoption effective January 1, 2018.  Under this approach, prior financial statements presented will not be restated.

 

In January 2016, the FASB published ASU 2016-01: Financial Instruments - Overall (Topic 825-10). The amendment addresses certain aspects of recognition, measurement, presentation and disclosure of financial assets and liabilities. The amendments in this ASU are effective for public business entities for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The impact of adoption of the standard has not yet been determined. The adoption of ASU 2016-01 is not expected to impact the consolidated financial statements.   

 

In February 2016, the FASB published ASU 2016-02: Leases (Topic 842). The amendment proposes that all lessees should recognize the assets and liabilities that arise from leases. Elections may be available for those leases with terms of 12 months or less. The amendment still retains the distinction between finance leases and operating leases. The amendments in this ASU are effective for public business entities for financial statements issued for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. The impact of the adoption of the standard is expected to result in the recognition of all leases with the corresponding assets and liabilities recorded in the consolidated financial statements. Management is currently evaluating the qualitative and quantitative impact of this standard.  

 

40

 

 

In May 2016, the FASB published ASU 2016-13 Financial Instruments – Credit losses (Topic 326): Measurement of Credit Losses on Financial Instruments. The main objective of this Update is to provide financial statement users with more decision-useful information about the expected credit losses on financial instruments and other commitments to extend credit held by a reporting entity at each reporting date. To achieve this objective, the amendments in this Update replace the incurred loss impairment methodology in current U.S. GAAP with a methodology that reflects expected credit losses and requires consideration of a broader range of reasonable and supportable information to inform credit loss estimates. The amendment is effective for years beginning after December 15, 2019 including interim periods with those years. Early adoption is permitted only for those annual reporting periods beginning on or after December 15, 2018. The Company continues to evaluate the impact of this accounting standard. The impact of adoption of the standard has not yet been determined. 

 

In August 2016, the FASB published ASU 2016-15 Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments. This Accounting Standards Update addresses the following eight specific cash flow issues: Debt prepayment or debt extinguishment costs; settlement of zero-coupon debt instruments or other debt instruments with coupon interest rates that are insignificant in relation to the effective interest rate of the borrowing; contingent consideration payments made after a business combination; proceeds from the settlement of insurance claims; proceeds from the settlement of corporate-owned life insurance policies (COLIs) (including bank-owned life insurance policies (BOLIs)); distributions received from equity method investees; beneficial interests in securitization transactions; and separately identifiable cash flows and application of the predominance principle. The amendment is effective for years beginning after December 15, 2017 including interim periods with those years. Early adoption is permitted. The adoption of ASU 2016-15 is not expected to impact the consolidated financial statements.  

 

In November 2016, the FASB published ASU 2016-18 Statement of Cash Flows (Topic 230): Restricted Cash. This update addresses the requirement that a statement of cash flows explain the change during the period in the total of cash, cash equivalents, and amounts generally described as restricted cash or restricted cash equivalents. Therefore, amounts generally described as restricted cash and restricted cash equivalents should be included with cash and cash equivalents when reconciling the beginning-of-period and end-of-period total amounts shown on the statement of cash flows. The amendment is effective for years beginning after December 15, 2017 including interim periods with those years. Early adoption is permitted. The impact of adoption of the standard is expected to result in a modification to the current presentation of the statement of cash flows such that restricted cash is not presented as an investing activity, but is presented as part of the net change in cash from beginning to the ending balance.

 

In January 2017, the FASB published ASU 2017- 01 Business Combinations (Topic 805). The objective of this update is to provide guidance is to amend and clarify the definition of a business. The amendments in this Update are effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The impact of adoption of the standard is currently not expected to impact the Company’s financial statements.

 

In May 2017, the FASB published ASU 2017- 09 Compensation - Stock Compensation (Topic 718). The objective of this update is to provide guidance about which changes to the terms or conditions of share-based payment award require an entity to apply modification accounting. The amendments in this Update are effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The impact of adoption of the standard is currently not expected to impact the Company’s financial statements.

 

In August 2017, the FASB published ASU 2017-12 Derivatives and Hedging (Topic 815) Targeted Improvements to Accounting for Hedging Activities. The objective of this update is to improve the financial reporting of hedging relationships to better portray the economic results of an entity’s risk management activities in its financial statements. In addition to that main objective, the amendments in this Update make certain targeted improvements to simplify the application of the hedge accounting guidance in current GAAP based on the feedback received from preparers, auditors, users, and other stakeholders. The amendments in this Update are effective for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. The impact of adoption of the standard is currently not expected to impact the Company’s financial statements as it does not apply hedge accounting. However, if the Company were to apply hedge accounting, it may impact the way in which the Company identifies and discloses the underlying risks it hedges against.

 

41

 

 

Critical Accounting Policies and Estimates

 

The preparation of financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.

 

Note 3 to the consolidated financial statements describe the significant accounting policies and methods used in the preparation of our consolidated financial statements. The following critical accounting policies are affected significantly by judgments, assumptions and estimates used in the preparation of the consolidated financial statements. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.  

 

Impairment of Property, plant and equipment

 

We review property, plant and equipment for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable in accordance with subtopic 10 of ASC 360, “Property, Plant and Equipment”. Under ASC 360-10 assets must be classified as either held-for-use or held-for-sale. An impairment loss is recognized when the carrying amount of an asset that is held and used exceeds the projected undiscounted future net cash flows expected from its use and disposal, and is measured as the amount by which the carrying amount of the asset exceeds its fair value, which is measured by discounted cash flows when quoted market prices are not available. For assets held-for-sale, an impairment loss is recognized when the carrying amount exceeds fair value less costs to dispose.

 

Deferred Tax Asset Valuation Allowance

 

In assessing the realization of deferred tax assets, we consider whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income. We consider the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in making this assessment. Guidance under ASC 740 states that forming a conclusion that a valuation allowance is not needed is difficult when there is negative evidence, such as cumulative losses in recent years in the jurisdictions to which the deferred tax assets relate. Based upon consideration of these factors, management believes the recorded valuation allowance related to all of its deferred tax assets arising in Canada, United States and Asia is appropriate. There is no valuation allowance related to deferred tax assets in Mexico.

 

Inventory valuation

 

Inventories are valued, on a first-in, first-out basis, at the lower of cost and replacement cost for raw materials and at the lower of cost and net realizable value for work in progress and finished goods. Work in progress and finished goods inventories include an application of relevant overhead. Fixed production overheads are allocated to inventory based on normal capacity of production facilities. The Company writes down estimated obsolete or excess inventory for the difference between the cost of inventory and estimated net realizable value based upon customer forecasts, shrinkage, the aging and future demand for the inventory, past experience with specific customers, and the ability to sell inventory back to customers or return to suppliers. If these assumptions change, additional write-downs may be required. Parts and other inventory items relate to equipment servicing parts that are capitalized to inventory and expensed as utilized to service the equipment.

 

42

 

 

Item 7A.

 Quantitative and Qualitative Disclosures about Market Risk

  

Interest Rate Risk

 

The PNC Facilities bears interest at a floating rate. The weighted average interest rate incurred on the PNC Facilities for the year ended December 31, 2017 was 4.9%. Subject to the Twelfth Amendment, advances made under the PNC Revolving Credit Facility bear interest at the U.S. base rate plus 0.8%. The applicable interest rate for the Long-Term Debt Facility is U.S. base rate plus 1.3%. The base commercial lending rate should approximate prime rate. At December 31, 2017, the interest rates on the PNC Revolving Credit Facility and the PNC Long-Term Debt Facility were 5.3% and 5.8%, respectively.

 

The impact of a 10% change in interest rates would not have a material impact on our reported earnings.

 

Foreign Currency Exchange Risk

 

Given our global business operations, we are exposed to exchange rate fluctuations on expenditures denominated in foreign currencies. However, most of our sales and component purchases are denominated in U.S. dollars, which limits our foreign currency risk. Our foreign exchange risk relates primarily to our Canadian, Mexican and Asian payroll, Euro based component purchases and other operating expenses denominated in local currencies in our geographic locations. To mitigate this risk, the Company enters into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to forecasted Canadian dollar and Mexican peso. The strengthening of the Canadian dollar and Mexican peso would result in an increase in costs to the organization and may lead to a reduction in reported earnings.

 

The impact of a 10% change in exchange rates would be estimated to have the following impact on cost of sales for the Company:

 

10% increase in both the CAD and PESO foreign exchange rates (million)

  $ 0.7  

10% decrease in both the CAD and PESO foreign exchange rates (million)

  $ (0.9

)

 

Credit Risk

 

In the normal course of operations, there is a risk that a counterparty may default on its contractual obligations to us which would result in a financial loss that could impact our reported earnings. In order to mitigate this risk, we complete credit approval procedures for new and existing customers and obtain credit insurance where it is financially viable to do so given anticipated revenue volumes, in addition to monitoring our customers’ financial performance. We believe our procedures in place to mitigate customer credit risk and the respective allowance for doubtful accounts are adequate. During the year ended December 31, 2017, the Company recorded an additional provision for bad debt expense of $0.7 million predominantly related to one customer which experienced financial issues. The Company takes measures to reduce credit risk, these charges can have a material impact on our financial performance.

 

There is limited risk of financial loss of defaults on our outstanding forward currency contracts as the counterparty to the transactions had a Standard and Poor’s rating of A- or above as at December 31, 2017.

 

Liquidity Risk

 

There is a risk that we may not have sufficient cash available to satisfy our financial obligations as they come due. The financial liabilities we have recorded in the form of accounts payable, accrued liabilities and other current liabilities are primarily due within 90 days with the exception of the current portion of capital lease obligations which could exceed 90 days and our PNC Revolving Credit Facility which utilizes a lock-box to pay down the obligation effectively daily. Principal payments for the PNC Long-Term Debt Facility are made on a quarterly basis. As at December 31, 2017, the Company’s liquidity is comprised of $5,536 in cash on hand and $5,295 of funds available to borrow under the PNC Revolving Credit Facility. We believe that cash flow from operations, together with cash on hand and our PNC Revolving Credit Facility, which has a maximum credit limit of $30,000 and PNC Long-Term Debt Facility of $10,000 are sufficient to fund our financial obligations. However, availability under the PNC Revolving Credit Facility is subject to certain conditions, including borrowing base conditions based on eligible inventory and accounts receivable, as determined by the lender.

 

43

 

 

Item 8.

Financial Statements and Supplementary Data

 

The information called for by this item is indexed on page F-1 of this Report and is contained on pages F-2 through F-34.

 

44

 

 

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

None.

 

Item 9A.

Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

The Company’s management, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company’s disclosure controls and procedures, as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as of the end of the period covered by this Annual Report on Form 10-K.

 

Based on this evaluation, the Company’s Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of the period covered by this report, the Company’s disclosure controls and procedures were effective as of December 31, 2017 to ensure that information required to be disclosed by the Company in reports that it files or submits under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the applicable Securities and Exchange Commission rules and forms and (ii) accumulated and communicated to the Company’s management, including the Company’s Chief Executive Officer and the Company’s Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

 

Management’s Annual Report on Internal Control over Financial Reporting

 

Management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in rules 13a-15(f) of the Exchange Act.

 

The Company’s internal control over financial reporting is a process designed by, or under the supervision of, the Chief Executive Officer and Chief Financial Officer, or persons performing similar functions, and effected by the Company’s Board of Directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with United States generally accepted accounting principles. The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with accounting principles generally accepted in the U.S., and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Furthermore, an assessment that internal control over financial reporting was effective for any completed period does not mean that internal control over financial reporting will be assessed as effective for any future period as processes and procedures may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate, among other reasons.

  

Management conducted an assessment of the Company’s internal control over financial reporting based on the framework established by the Committee of Sponsoring Organizations (“COSO”) of the Treadway Commission in Internal Control—Integrated Framework (2013).

 

45

 

 

Management has completed its assessment and has concluded the Company’s internal control over financial reporting as of December 31, 2017 was effective.

 

Changes in Internal Control over Financial Reporting

 

There were no changes in the Company’s internal control over financial reporting that occurred during the quarter ended December 31, 2017 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

This Annual Report on Form 10K does not include an attestation report from the Company’s independent registered public accounting firm on the effectiveness of internal control controls over financial reporting as of December 31, 2017, as permitted under the rules of the SEC for smaller reporting companies.

 

 

Item 9B.

Other Information

 

None. 

 

46

 

 

PART III

 

Item 10.

Directors, Executive Officers and Corporate Governance

 

 

EXECUTIVE OFFICERS AND DIRECTORS

 

Our executive officers and directors and their ages as of March 8, 2018, are as follows:

 

 Name

 

Age

 

 Office/Title

 Clarke H. Bailey 

 

63

 

 Chair of the Board of Directors

 David Sandberg

 

45

 

 Director

 Frederick Wasserman

 

63

 

 Director

 J. Randall Waterfield

 

44

 

 Director

 Edward Smith

 

55

 

 President and Chief Executive Officer, and Director

 Rich Fitzgerald

 

50

 

 Chief Operating Officer 

 Roger Dunfield

 

47

 

 Chief Financial Officer 

 

 

Clarke H. Bailey joined the Board of Directors in June 2011. Mr. Bailey served as Executive Chairman and Interim Chief Financial Officer of the Company from May 2013 to April 2014. Mr. Bailey is presently the Chairman and CEO of EDCI Holdings, Inc., a holding company, a position held since 2009. In addition to his position at EDCI, he serves as a Director of Iron Mountain Incorporated where he has served since 1998 and is currently Chairman of its Risk and Safety Committee. Previously, Mr. Bailey served as the Chairman and CEO of Arcus, Inc. until 1998 and as Managing Director and Head of the Principal Investment Group at Oppenheimer & Co. until 1990. Mr. Bailey has also previously served as a director on four other public company boards, five private company boards, and three non-profit boards of trustees. The Board believes that his significant experience in manufacturing, finance and M&A, and serving as a Chief Executive Officer and on both public and private boards, make him well qualified to serve as a director.

 

David Sandberg joined the Board of Directors in April 2009. Mr. Sandberg is the managing member of Red Oak Partners, LLC, which he founded in March 2003.  He is also the portfolio manager of various funds managed by Red Oak Partners. Previously, Mr. Sandberg co-managed JH Whitney & Co’s Green River Fund, where he was employed from 1998 to 2002. Mr. Sandberg serves as the Chairman of the Board of Asure Software, Inc. and Cord Blood America, Inc., both of which are public companies.  He also served as a Director of Issuer Direct Corporation, a public company, and WTI Holdings, LLC, a private company.  Previously Mr. Sandberg served as a director of public companies EDCI, Inc., RF Industries, Ltd. and Planar Systems, Inc. Mr. Sandberg has experience serving as a member of and as Chairman of each of Audit, Compensation, Nominating & Governance, and Strategic committees for public companies.  He received a BA in Economics and a BS in Industrial Management from Carnegie Mellon University in 1994. Red Oak Partners, LLC is the largest stockholder of the Company. The Board believes that his experience serving as director on other public companies, as well has his experience in finance and public company capital market transactions, make him well qualified to serve as a director.

 

47

 

 

Frederick Wasserman joined the Board of Directors in August 2013. Mr. Wasserman is a seasoned executive who has 40 years of business experience helping to create shareholder value with a number of companies. Mr. Wasserman has been the President, Chief Operating Officer and Chief Financial Officer for a number of companies, including Mitchell & Ness Nostalgia Company where he was CFO and COO. He also served as President and CFO of Goebel of North America. Mr. Wasserman is currently, and has been since 2008, the President of FGW Partners LLC as well as the Chief Compliance Officer of Wynnefield Capital Inc., a stockholder of SMTC. He served on the Board of Directors for National Holdings Corporation from October 2013 to September 2016. He currently serves on the Board of Directors of Tapimmune Inc., a position held since January 2016, MAM Software Group, Inc. and DLH Holdings Corp. each of which is a publicly traded company. The Board believes that Mr. Wasserman’s experience serving as a director on publicly traded companies and significant management experience make him well qualified to serve as a director.

 

J. Randall Waterfield joined the Board of Directors in April 2012. Mr. Waterfield is the Chairman of Waterfield Group, a diversified financial services holding company that traces its origins to 1928. After selling the largest private mortgage company in the US and largest Indiana-based bank in 2006 and 2007, respectively, Waterfield Group has diversified into technology, real estate, asset management and merchant banking. Mr. Waterfield holds the Chartered Financial Analyst designation, and is the 2017-18 Chairman of the Board of Directors of YPO, a member of Mensa, and a graduate of Harvard University. Mr. Waterfield currently also serves on the Board of Directors of Waterfield Group and its affiliates, Environmental Risk Transfer and Asure Software Inc. Previously, Mr. Waterfield was an equity research analyst at Goldman Sachs & Co. from 1996 through 1999, primarily responsible for small capitalization growth portfolios. The Board believes that Mr. Waterfield’s experience in finance and M&A make him well qualified to serve as a director.

  

Edward Smith joined the Company and Board of Directors in February 2017. He currently serves as the Company’s President and Chief Executive Officer, a position he has held since May 2017. From February 2017 to May 2017, Mr. Smith served as Interim President and Chief Executive Officer of the Company. Mr. Smith has extensive experience in the electronic manufacturing services (EMS) industry and the electronic components distribution industry. He most recently served as Senior Vice President, Global Embedded Solutions at Avnet, Inc. during 2016 and as President, Avnet Electronics Marketing Americas from February 2009 to March 2016. Mr. Smith has also served in various other positions at Avnet, Inc. beginning in 1994. From 2002 to 2004, Mr. Smith served as President and Chief Executive Officer of SMTEK International, Inc., a tier II manufacturer in the EMS industry. Mr. Smith served as a member of the Electronic Components Industry Association from 2009 to 2017. The Board believes that Mr. Smith’s extensive experience in the EMS industry and as an executive officer of various other companies, make him well qualified to serve as a director.

 

 

Rich Fitzgerald joined the Company in June 2017. He currently serves as the Company’s Chief Operating Officer. Mr. Fitzgerald honorably served 12 years in the US Marine Corp where he reached the rank of captain. Prior to joining the Company, Mr. Fitzgerald served as Global Vice President of Avnet Integrated Solutions from January 2017 to May 2017 and as Vice President of Business Operations of Avnet Electronics Embedded from July 2014 to January 2017. Prior to joining Avnet, he served as Chief Operating Officer of Qual-Pro Corporation from January 2010 to July 2014 and as Chief Executive Officer of Team Precision Public Company Limited from July 2008 to December 2009, as well as Global Vice President of Operations for CTS Corporation.

 

Roger Dunfield joined the Company in February 2016. He currently serves as the Company’s Chief Financial Officer. Mr. Dunfield is an experienced finance executive with over 20 years of experience in public accounting and the manufacturing industry.  He joins SMTC from Sanmina Corporation where he held the position of Vice President, Finance and Controller in the CPS Division from 2010 until he joined the Company in February 2016.  Prior to joining Sanmina, he held a number of finance positions of increasing responsibility for Merix Corporation. Mr. Dunfield brings diverse experience in financial and management reporting, business integration, systems implementation, financial planning and analysis and business partnering. Mr. Dunfield started his career in public accounting with PricewaterhouseCoopers LLP.

 

Directors are elected on an annual basis. The term of each director’s service expires at our next annual meeting of stockholders and at such time as his successor is duly elected and qualified. Officers serve at the discretion of the Board.

 

There are no family relationships between any of our directors or executive officers.

 

48

 

 

INFORMATION REGARDING THE BOARD OF DIRECTORS AND ITS COMMITTEES

 

Board of Directors

 

The number of authorized directors on the Board is currently fixed at seven, however the Board is currently composed of the five directors: Clarke H. Bailey, David Sandberg, J. Randall Waterfield, Frederick Wasserman and Edward Smith.

 

During fiscal year 2017, the Board held 10 meetings, including regularly scheduled and special meetings. During fiscal year 2017, each director attended more than seventy-five percent (75%) of the total number of meetings of the Board and the committees on which he served. The Company does not have a formal written policy specifying whether directors must attend stockholder meetings, however to the extent reasonably practicable, Board members are encouraged to attend stockholder meetings in person or telephonically. The entire Board attended our 2017 Annual Meeting of Stockholders.

 

Board Committees

 

The Board has three standing committees: an Audit Committee, Compensation and Management Development Committee and a Nominating and Governance Committee, each of which is described below. Each committee operates under a written charter that the Board adopted. All of the charters are publicly available on our website at www.smtc.com under the “Corporate Governance” link under the “Investor Relations” tab. You may also obtain a copy of our committee charters upon written request to our Investor Relations Department at our principal executive offices.

 

It is the role of the Nominating and Governance Committee to recommend to the Board candidates to serve on the committees. The Board elects committee members and they serve until their successors are elected and qualified or until their earlier death, retirement, resignation or removal. The following were the standing committees of the Board for fiscal year 2017 and the number of meetings each committee held during that period:

 

Committees

 

Number of

Meetings

 

Members

 

 

 

 

 

 

Audit Committee

 

 

5

 

Frederick Wasserman (Chair), David Sandberg, J. Randall Waterfield

Compensation and Management Development Committee

 

 

8

 

Clarke H. Bailey (Chair), Frederick Wasserman, David Sandberg

Nominating and Governance Committee

 

 

1

 

David Sandberg (Chair), J. Randall Waterfield, Clarke H. Bailey

 

___________________________

 

Director Independence

 

The Board has determined that each of Clarke H. Bailey, David Sandberg, J. Randall Waterfield and Frederick Wasserman is an “independent director” as defined in the listing rules of the NASDAQ Stock Market (“NASDAQ Rules”). Mr. Smith was not an “independent director” as defined in NASDAQ Rules due to his service as our President and Chief Executive Officer.

 

All members of the Nominating and Governance Committee are “independent directors” as defined in and as required by the NASDAQ Rules.

 

49

 

 

All Audit Committee members are “independent directors” as defined in the NASDAQ Rules and Rule 10A-3(b)(1) under the Exchange Act, and as required by the NASDAQ Rules.

 

All Compensation and Management Development Committee members are “independent directors” as defined in and as required by the NASDAQ Rules.

 

Audit Committee

 

The Audit Committee is responsible for assisting the Board in fulfilling its responsibility to stockholders, potential stockholders and the investment community in monitoring the Company’s accounting and reporting practices, the Company’s systems of internal accounting and financial controls, the Company’s compliance with legal and regulatory requirements related to financial reporting, the qualifications and independence of the Company’s independent registered public accounting firm, the performance of the Company’s independent registered public accounting firm, and the quality and integrity of the Company’s financial reports. The Audit Committee has the sole authority to retain and terminate the independent registered public accounting firm and is directly responsible for the compensation and oversight of the work of the independent registered public accounting firm. The independent registered public accounting firm reports directly to the Audit Committee. The Audit Committee reviews and discusses with management and the independent registered public accounting firm the annual audited and unaudited quarterly financial statements, the disclosures in the Company’s annual and quarterly reports filed with the SEC, critical accounting policies and practices used by the Company, the Company’s internal control over financial reporting, and the Company’s major financial risk exposures.

 

The Board has determined that Mr. Wasserman, who is currently the chairman of the Audit Committee, Mr. Sandberg and Mr. Waterfield are “audit committee financial experts” as defined by the applicable rules of the SEC.

  

Compensation and Management Development Committee

 

The Compensation and Management Development Committee is responsible for discharging the Board’s duties relating to executive compensation. This Committee makes all decisions regarding the compensation of the executive officers with input and recommendations from the Chief Executive Officer (except with respect to compensation decisions for the Chief Executive Officer himself). In addition, this Committee is responsible for administering the Company’s executive compensation program. This Committee reviews both short-term and long-term corporate goals and objectives with respect to the compensation of the Chief Executive Officer and the other executive officers. This Committee also reviews and discusses with management the impact of the Company’s compensation policies and practices on risk-taking within the Company. This Committee evaluates at least once a year the performance of the Chief Executive Officer and other executive officers in light of these goals and objectives and, based on these evaluations, approves the compensation of the Chief Executive Officer and the other executive officers. This Committee also reviews and recommends to the Board incentive-compensation plans that are subject to the Board’s approval.

 

During 2017, the Compensation and Management Development Committee utilized the services of a compensation consultant. As part of the 2017 compensation process, the Compensation and Management Development Committee retained Pay Governance LLC (“Pay Governance”) as its independent compensation consultant. Pay Governance provided advisory services only with respect to executive and equity compensation and a competitive assessment of compensation for non-executives, in each case as directed by the Compensation and Management Development Committee, and does no other business with the Company. Prior to engaging Pay Governance, the Compensation and Management Development Committee considered the independence of Pay Governance in accordance with the terms of the charter of the Compensation and Management Development Committee and applicable regulations. The Compensation and Management Development Committee did not identify any conflicts of interest with respect to Pay Governance.

 

 

Nominating and Corporate Governance Committee

 

The Nominating and Corporate Governance Committee is composed solely of independent directors, and participates in the search for qualified directors. The criteria for selecting nominees for election as directors of the Company includes experience in the operation of public companies, accomplishments, education, skills, and the highest personal and professional integrity. The candidate must be willing and available to serve and should generally represent the interests of all stockholders, and not of any special interest group. After conducting an initial evaluation of a candidate, this Committee will interview that candidate if it believes the candidate might be suitable to be a director and will also ask the candidate to meet with other directors and management. If this Committee believes a candidate would be a valuable addition to the Board of Directors, it will recommend to the full Board that candidate’s election to the Board.

 

50

 

 

The Nominating and Corporate Governance Committee does not have a formal written policy with regard to considering diversity in identifying nominees for directors, but, when considering director candidates, it seeks individuals with backgrounds and skills that, when combined with those of the Company’s other directors, bring a broad range of complementary skills, expertise, industry and regulatory knowledge, and diversity of perspectives to build a capable, responsive and effective Board. Diversity considerations for a director nominee may vary at any time according to the particular area of expertise being sought to complement the existing Board composition.

 

A stockholder wishing to nominate a candidate should forward the candidate’s name and a detailed background of the candidate’s qualifications to the Secretary of the Company in accordance with the procedures outlined in the Company’s by-laws.

 

 

Code of Ethics

 

The Board has adopted a Code of Ethics and Conduct, which is available on the Company’s website at www.smtc.com or in print without charge to any person who requests such document in writing. Any such request should be made to the Company at 7050 Woodbine Avenue, Suite 300, Markham, Ontario, Canada L3R 4G8 Attn: Chief Financial Officer. The Company intends to post any amendment to or waiver from the Code of Ethics and Conduct that requires disclosure under the SEC rules on its website.

 

Communications with Directors

 

The Board has provided a process by which stockholders or other interested parties can communicate with the Board or with the non-management directors as a group. All such questions or inquiries should be directed to the President and Chief Executive Officer, Edward Smith, who can be reached at ed.smith@smtc.com. Mr. Smith will review and communicate pertinent inquiries to the Board or, if requested, the non-management directors as a group.

 

Leadership Structure

 

The Board has previously determined that it was in the best interests of the Company and its stockholders for separate individuals to serve as Chair of the Board and Chief Executive Officer, while recognizing that there may be circumstances in the future that would lead to the same individual serving in both capacities. The Company believes this leadership structure has been the most appropriate for the Company because the Board has been able to rely upon the experience and perspective Mr. Bailey has gained from serving both as a Director and while temporarily serving as the Company’s Executive Chair and Interim Chief Financial Officer during 2013 and 2014. Mr. Bailey fulfills his responsibilities as Chair through close interaction with management and all Directors. This structure ensures a greater role of independent directors in the active oversight of our business, including risk management oversight, and in setting agendas and establishing Board priorities and procedures. This structure also allows our Chief Executive Officer to focus to a greater extent on the management of our day-to-day operations. 

 

 

Board Role in Risk Oversight

 

The Board is responsible for consideration and oversight of the risks facing the Company. The Board manages this oversight directly and through the Audit Committee and Compensation and Management Development Committee. The Board is kept informed by various reports provided to it on a regular basis, including reports made by management at the Board and Audit Committee and Compensation and Management Development Committee meetings. The Audit Committee performs a central oversight role with respect to financial and compliance risks, which the Audit Committee then regularly reviews with the full Board. The Compensation and Management Development Committee reviews and discusses with management the impact of the Company’s compensation policies and practices on risk taking within the Company. The Board believes that our current leadership structure and the composition of our Board protect stockholder interests and provide adequate independent oversight, while also providing outstanding leadership and direction for our Board and management.

 

 

Section 16(a) Beneficial Ownership Reporting Compliance

 

Section 16(a) of the Exchange Act requires the Company’s directors, officers (as defined in Rule 16a-1 of the Exchange Act) and any persons who directly or indirectly hold more than 10% of the Company’s common stock (“Reporting Persons”) to file reports of ownership and changes in ownership with the SEC on Forms 3, 4 and 5. Reporting Persons are required by SEC regulations to furnish the Company with copies of all Forms 3, 4 and 5 that they file.

 

Based on the Company’s review of copies of such forms it has received from its Reporting Persons, the Reporting Persons met their Section 16(a) filing requirements in a timely manner during fiscal year 2017.

 

51

 

 

Item 11.

Executive Compensation

 

Director Compensation

 

Independent directors earn $40,000 per year for serving on the Board. The Chair of the Audit Committee earns an additional annual cash retainer of $10,000, the Chair of the Compensation and Management Development Committee earns an additional annual cash retainer of $7,000 and the Chair of the Nominating and Governance Committee earn an additional annual retainer of $3,000. The Chair of the Board of Directors may be awarded additional cash and equity compensation if circumstances warrant at the discretion of the Board. Annual equity compensation is also granted to independent directors with an aggregate grant date value of $20,000, which is issued in the form of either stock options or restricted stock units. Annual equity compensation is also provided to the Chair of the Board of Directors with an aggregate grant date value of $50,000, which is issued in the form of either stock options or restricted stock units (“RSUs”). We do not compensate Mr. Smith, our President and Chief Executive Officer, for his service on our Board of Directors.

 

The following table outlines the compensation to the Board of Directors for the period ended December 31, 2017:

 

Name

 

Fees Earned

or Paid in

Cash ($)

 

 

Stock

Awards

(a)(b)($)

 

 

Total

($)

 

Clarke Bailey

 

 

87,000

     

50,000

     

137,000

 

David Sandberg

 

 

43,000

     

20,000

     

63,000

 

J. Randall Waterfield

 

 

40,000

     

20,000

     

60,000

 

Frederick Wasserman

 

 

50,000

     

20,000

     

70,000

 

 

 

(a)

Stock awards issued to directors represented annual grants issued on December 13, 2017. The stock awards were issued in the form of restricted stock units, which vest at the end of a 12 month period. The amounts disclosed in this column represent the aggregate grant date fair value of the restricted stock units granted during the fiscal year computed in accordance with ASC 718. The fair values of these restricted stock units were calculated based on assumptions summarized in Note 6 to our audited consolidated financial statements for the year ended December 31, 2017 included in this Form 10-K.

     
 

(b)

The aggregate number of restricted stock unit awards outstanding for each of our non-employee directors as of December 31, 2017, is as follows:

 

 

Name   Number of Unvested
Restricted Stock Units
Clarke Bailey   31,250
David Sandberg   12,500
J. Randall Waterfield   12,500
Frederick Wasserman   12,500

 

52

 

 

EXECUTIVE COMPENSATION AND RELATED INFORMATION

 

 

 SUMMARY COMPENSATION TABLE

 

 

Name and 

Principal Position

Year  

Salary

($)

   

Bonus

($)(b)

   

 

Option

Awards

($) (a)

   

 

Stock

Awards

($)(a)

   

All Other Compensation

($) (c)

    Total ($)  

Sushil Dhiman (1)

2017

    86,683                               86,683  

Former President and Chief Executive Officer

2016

    381,000             152,440       261,231             794,771  

Edward Smith (2)

2017

    331,607       42,000       193,020       100,000       21,973       688,600  

President and Chief Executive Officer

2016

                                   

Rich Fitzgerald (3)

2017

    167,307       32,000       96,510                   295,817  

Chief Operating Officer

2016

                                   

Roger Dunfield

2017

    231,490       25,000       96,510                   353,000  

Chief Financial Officer

2016

    198,493             33,750       108,750             340,993  

 

 

 

(1)

Mr. Dhiman resigned effective February 17, 2017 and all unvested stock based awards were forfeited as of that date. No awards were outstanding as at December 31, 2017. 

  

 

(2)

Mr. Smith was hired on February 6, 2017, and effective February 17, 2017, commenced as Interim President and Chief Executive Officer of the Company. On May 15, 2017, Mr. Smith was appointed as President and Chief Executive Officer, removing the interim designation.

 

 

(3)

Rich Fitzgerald was hired effective June 5, 2017 as Chief Operating Officer.

 

53

 

 

 

(a)

The amounts disclosed in this column represent the aggregate grant date fair value of option awards or RSUs, as applicable granted during fiscal year computed in accordance with ASC 718. The fair values of these option awards and RSUs were calculated based on assumptions summarized in Note 6 to our audited consolidated financial statements for the year ended December 31, 2017, included in this Form 10-K.

 

 

(i)

Mr. Smith was granted 68,000 RSUs on February 17, 2017, with a grant date fair value of $100,000. The 68,000 RSUs vest on February 17, 2018. On May 15, 2017, Mr. Smith was granted 671,858 stock options with a strike price of $1.23 and will vest at 20% of the covered shares upon the Company’s average closing share price being above each of $2.00, $3.00, $4.00, $5.00 and $6.00 for a 90 day period. The stock options fair value was $0.28 per share and was calculated using the Cox, Ross and Rubenstein binomial model (“Binomial Model”).

 

 

(ii)

Mr. Dunfield was granted 335,929 stock options on May 15, 2017 with a strike price of $1.23 and will vest at 20% of the covered shares upon the Company’s average closing share price being above each of $2.00, $3.00, $4.00, $5.00 and $6.00 for a 90 day period. The stock options fair value was $0.28 per share and was calculated using the Binomial Model.

 

 

(iii)

Mr. Fitzgerald was granted 335,929 stock options on June 5, 2017 with a strike price of $1.26 and will vest at 20% of the covered shares upon the Company’s average closing share price being above each of $2.00, $3.00, $4.00, $5.00 and $6.00 for a 90 day period. The stock options fair value was $0.28 per share and was calculated using the Binomial Model.

 

 

 

(b)

Amount disclosed for fiscal 2017 represents the discretionary bonus earned by the officers as approved by the Board of Directors.

 

 

(c)

Amount disclosed as all other compensation represents the 2017 housing allowance paid to Mr. Smith as approved by the Board of Directors.

  

 Agreements with Executive Officers

  

On May 15, 2017, the Board of Directors of the Company appointed Edward Smith, the Company’s Interim President and Chief Executive Officer, to the role of President and Chief Executive Officer effective May 16, 2017. Mr. Smith, age 55, has served as President and Chief Executive Officer of the Company since May 16, 2017.

  

In connection with this appointment, Mr. Smith entered into an offer letter with the Company, dated May 15, 2017 (the “Smith Offer Letter”), pursuant to which Mr. Smith will receive an annual base salary of $325,000 and will be eligible to participate in the Company’s short-term incentive plan with a target bonus of 50% of his base salary. Pursuant to the Smith Offer Letter, Mr. Smith will also receive a one-time grant of options covering 671,858 shares of Company common stock under the Company’s 2010 Incentive Plan in May 2017. The options will have an exercise price per share equal to the Company per share closing price on the grant date, and will vest as to one-fifth (20%) of the covered shares upon the Company’s average closing share price being above each of $2.00, $3.00, $4.00, $5.00 and $6.00 per share for a 90 day period, or upon a Change in Control Event (as defined in the Smith Offer Letter ) resulting in the per share value of Company common stock being above those same thresholds (one-fifth if above $2.00, an additional one-fifth if above $3.00, an additional one-fifth if above $4.00, an additional one-fifth if above $5.00, and 100% if above $6.00), subject to Mr. Smith’s continued employment on the applicable vesting date. In the event of a Change in Control Event, outstanding stock options shall immediately expire to the extent they remain unvested; provided, however, the Company’s Board of Directors may, in its sole discretion, accelerate vesting effective immediately prior to, but contingent on, a Change in Control Event. To ensure alignment with shareholders, the options may not be exercised, and no option shares may be sold, within 180 days of any portion of the options vesting, unless a Change in Control Event occurs. The options shall otherwise reflect the Company’s standard terms and conditions for employee option grants, including a ten-year term, and will vest with respect to whole shares only.

 

In addition, the Smith Offer Letter provides that, in the event that Mr. Smith’s employment is terminated by the Company other than for “Cause” (as defined in the Smith Offer Letter) (other than in connection with or within twelve months following a “Change in Control Event” (as defined in the Smith Offer Letter)), Mr. Smith will receive his accrued and unpaid base salary through the date of termination and will continue to receive his base salary for a period of six months after the date of termination commencing with the first payroll period following the thirtieth day after the date of termination. In the event that Mr. Smith’s employment is terminated by the Company other than for Cause or if he resigns for “Good Reason” (as defined in the Smith Offer Letter) in connection with or within twelve months following a Change in Control Event, he will receive his accrued and unpaid base salary and, to the extent applicable, accrued and unpaid vacation through the date of termination, and will also continue to receive his base salary for a period of twelve months after the date of termination commencing with the first payroll period following the thirtieth day after the date of termination. Mr. Smith is also eligible for other benefits including participation in the Company’s 401(k) plan and four weeks of paid time off annually.

 

54

 

 

On May 15, 2017, in connection with Mr. Smith’s stock option award grant, the Company’s Board of Directors amended the terms of Section 4(c) of the Company’s 2010 Stock Incentive Plan, as amended, which provision limited the maximum number of shares of common stock for which stock options could be granted to any person in any calendar year to 350,000 shares, to permit, as a one-time waiver of such limit, the issuance of stock options covering 671,858 shares to Mr. Smith pursuant to the terms of the Smith Offer Letter.

 

There were no arrangements or understanding between Mr. Smith and any other persons pursuant to which he was appointed as an officer of the Company (other than arrangements or understanding with directors or officers of the Company acting solely in their capacities as such), he has no family relationships with any of the Company’s directors, executive officers, or any person nominated or chosen by the Company to become a director or executive officer, and he is not party to, and he does have any direct or indirect material interest in, any transaction requiring disclosure under Item 404(a) of Regulation S-K.

 

 

On May 15, 2017, the Company announced that the Board of Directors of the Company appointed Richard Fitzgerald, age 50, as the Company’s Chief Operating Officer effective on or before June 5, 2017.

  

In connection with this appointment, Mr. Fitzgerald entered into an offer letter with the Company, dated May 15, 2017 (the “Fitzgerald Offer Letter”), pursuant to which Mr. Fitzgerald will receive an annual base salary of $300,000 and will be eligible to participate in the Company’s short-term incentive plan with a target bonus of 25% of his base salary. Pursuant to the Fitzgerald Offer Letter, Mr. Fitzgerald will also receive a one-time grant of options covering 335,929 shares of Company common stock under the Company’s 2010 Incentive Plan as soon as practicable following the commencement of his employment. The options will have an exercise price per share equal to the Company per share closing price on the grant date, and will vest as to one-fifth (20%) of the covered shares upon the Company’s average closing share price being above each of $2.00, $3.00, $4.00, $5.00 and $6.00 per share for a 90 day period, or upon a Change in Control Event (as defined in the Fitzgerald Offer Letter ) resulting in the per share value of Company common stock being above those same thresholds (one-fifth if above $2.00, an additional one-fifth if above $3.00, an additional one-fifth if above $4.00, an additional one-fifth if above $5.00, and 100% if above $6.00), subject to Mr. Fitzgerald’s continued employment on the applicable vesting date. In the event of a Change in Control Event, outstanding stock options shall immediately expire to the extent they remain unvested; provided, however, the Company’s board of directors may, in its sole discretion, accelerate vesting effective immediately prior to, but contingent on, a Change in Control Event. To ensure alignment with shareholders, the options may not be exercised, and no option shares may be sold, within 180 days of any portion of the options vesting, unless a Change in Control Event occurs. The options shall otherwise reflect the Company’s standard terms and conditions for employee option grants, including a ten-year term, and will vest with respect to whole shares only.

 

In addition, the Fitzgerald Offer Letter provides that, in the event that Mr. Fitzgerald’s employment is terminated by the Company other than for “Cause” (as defined in the Fitzgerald Offer Letter) (other than in connection with or within twelve months following a “Change in Control Event” (as defined in the Fitzgerald Offer Letter)), Mr. Fitzgerald will receive his accrued and unpaid base salary through the date of termination and will continue to receive his base salary for a period of six months after the date of termination commencing with the first payroll period following the thirtieth day after the date of termination. In the event that Mr. Fitzgerald’s employment is terminated by the Company other than for Cause or if he resigns for “Good Reason” (as defined the Fitzgerald Offer Letter) in connection with or within twelve months following a Change in Control Event, he will receive his accrued and unpaid base salary and, to the extent applicable, accrued and unpaid vacation through the date of termination, and will also continue to receive his base salary for a period of twelve months after the date of termination commencing with the first payroll period following the thirtieth day after the date of termination. Mr. Fitzgerald is also eligible for other benefits including participation in the Company’s 401(k) plan and three weeks of paid time off annually.

 

There were no arrangements or understanding between Mr. Fitzgerald and any other persons pursuant to which he was appointed as an officer of the Company (other than arrangements or understanding with directors or officers of the Company acting solely in their capacities as such), he has no family relationships with any of the Company’s directors, executive officers, or any person nominated or chosen by the Company to become a director or executive officer, and he is not party to, and he does have any direct or indirect material interest in, any transaction requiring disclosure under Item 404(a) of Regulation S-K.

 

55

 

 

On May 15, 2017, the Company and Roger Dunfield, the Company’s Chief Financial Officer, entered into an agreement (the “Dunfield Agreement”) pursuant to which Mr. Dunfield will receive a one-time grant of options covering 335,929 shares of Company common stock under the Company’s 2010 Incentive Plan on May 15, 2017. The options will have an exercise price per share equal to the Company per share closing price on the grant date, and will vest as to one-fifth (20%) of the covered shares upon the Company’s average closing share price being above each of $2.00, $3.00, $4.00, $5.00 and $6.00 per share for a 90 day period, or upon a Change in Control Event (as defined in the Dunfield Agreement ) resulting in the per share value of Company common stock being above those same thresholds (one-fifth if above $2.00, an additional one-fifth if above $3.00, an additional one-fifth if above $4.00, an additional one-fifth if above $5.00, and 100% if above $6.00), subject to Mr. Dunfield’s continued employment on the applicable vesting date. In the event of a Change in Control Event, outstanding stock options shall immediately expire to the extent they remain unvested; provided, however, the Company’s board of directors may, in its sole discretion, accelerate vesting effective immediately prior to, but contingent on, a Change in Control Event To ensure alignment with shareholders, the options may not be exercised, and no option shares may be sold, within 180 days of any portion of the options vesting, unless a Change in Control Event occurs. The options shall otherwise reflect the Company’s standard terms and conditions for employee option grants, including a ten-year term, and will vest with respect to whole shares only.

 

The Dunfield Agreement also amends the letter agreement between Mr. Dunfield and the Company, dated January 22, 2016 (the “Dunfield Letter Agreement”), which sets forth the terms of Mr. Dunfield’s employment, such that Mr. Dunfield will no longer be eligible to receive the Annual LTIP Grant (as defined in the Dunfield Letter Agreement). The terms of Mr. Dunfield’s employment will otherwise remain unchanged. Notwithstanding the foregoing, but for the avoidance of doubt, full vesting acceleration in the event of certain terminations of your employment in connection with or within twelve (12) months following a Change in Control Event, as set forth in the “Change in Control” paragraph of the Dunfield Letter Agreement, still will apply with respect to equity awards granted prior to May 15, 2017 (subject to the terms and conditions of the Dunfield Letter Agreement); however, such vesting acceleration will not apply to the 335,929 options granted as part of the Dunfield Agreement.

 

56

 

 

OUTSTANDING EQUITY AWARDS AT FISCAL YEAR-END

 

The following table provides information regarding unexercised stock options and outstanding RSUs for each named executive officer outstanding as at December 31, 2017.

 

      Option Awards             Stock Awards  

Name

Award Description

 

Number of

Securities

Underlying

Unexercised

Options

(#)

   

Number of

Securities

Underlying

Unexercised

Unearned

Options

(#)(a)

   

Option

Exercise

Price

($)

   

Option

Expiration

Date

   

Number of Shares or Units of Stock That Have Not Vested

(#)(b)

   

Market Value of Shares or Units of Stock That Have Not Vested

($)(c)

 
                                                   

Edward Smith

Stock Options

    671,858       671,858       1.23    

5/17/2027

             
 

Restricted Stock Units

                            68,000       128,520  

Roger Dunfield

Stock Options

    71,156       47,437       1.33    

12/12/2026

             
 

Stock Options

    335,929       335,929       1.23    

5/17/2027

             
 

Restricted Stock Units

                            25,376       47,961  
 

Restricted Stock Units

                            31,746       60,000  

Richard Fitzgerald

Stock Options

    335,929       335,929       1.26    

6/5/2027

             

 

______________________________________________________________________

 

(a)

Mr. Dunfield has 47,437 unvested stock options. 23,719 stock options will vest on December 12, 2018 and remaining 23,719 stock options will vest on December 12, 2019.

 

(b)

Mr. Smith has 68,000 RSUs that will vest on February 17, 2018. Mr. Dunfield has 31,746 RSUs that will vest on February 12, 2018.

 

(c)

Based on a price of $1.89 per share, which was the closing price of our common stock on the NASDAQ Global Market on December 29, 2017, the last day of trading in fiscal year 2017. 

 

 

 

Defined Contribution Plan

 

The Company has a tax-qualified 401(k) defined contribution retirement plan established for U.S. employees in which named executive officers may participate.

 

57

 

 

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

 

The following table sets forth, as of February 23, 2018, the number of shares beneficially owned and the percentage ownership for:

 

     each person who is known by us to own beneficially more than 5% of our outstanding shares of common stock;

 

     each named executive officer named in our summary compensation table and each current director; and

 

     all executive officers and current directors as a group.

 

As of February 23, 2018, our outstanding common stock consisted of 17,092,373 shares.

 

Unless otherwise indicated below, to our knowledge, all persons listed below have sole voting and investment power with respect to their shares. Unless otherwise indicated below, each entity or person listed below maintains a mailing address of c/o SMTC Corporation, 7050 Woodbine Avenue, Suite 300 Markham, Ontario, Canada L3R 4G8. The number of shares beneficially owned by each person is determined under rules promulgated by the SEC. Under these rules, beneficial ownership includes any shares as to which the person has sole or shared voting or investment power and any shares as to which the individual or entity has the right to acquire beneficial ownership of within 60 days after February 23, 2018.

 

   

Shares Beneficially Owned

 

Name and Address

 

Shares

   

Options/RSUs

(3)

   

Total

   

Percentage

of Shares

Beneficially

Owned(*)

 

Stockholders with more than 5% ownership:

                               

Red Oak Partners, LLC (1)

    3,265,339       20,230       3,285,569       19.2

%

1969 SW 17th Street

                               

Boca Raton, Florida 33486

                               

Nelson Obus in care of Wynnefield Partners Small Cap Value, L.P. (2)

                               

450 Seventh Avenue, Suite 509

                               

New York, New York 10123

    1,392,832             1,392,832       8.1

%

                                 

Directors and Named Executive Officers:

                               

Clarke Bailey

    212,796       100,576       313,372       1.8 %

David Sandberg (1)

    3,265,339       20,230       3,285,569       19.2 %

J. Randall Waterfield

    539,242       20,230       559,472       3.3 %

Frederick Wasserman

    35,519       20,230       55,749    

#

 

Edward Smith

    163,700             163,700       1.0 %

Roger Dunfield

    59,524       23,719       83,243    

#

 

Richard Fitzgerald

    21,749             21,749    

#

 

Sushil Dhiman

                       
                                 
                                 

All Directors and Executive Officers as a group (7 persons)

    4,297,869       184,985       4,482,854       26.2 %

 

* The number of shares of Common Stock deemed outstanding on February 23, 2018 with respect to a person or group includes (a) 17,092,373 shares outstanding on such date and (b) all options that are currently exercisable or will be exercisable within 60 days of February 23, 2018 by the person or group in question.

 

# Less than 1%

 

58

 

 

 

(1)

Mr. Sandberg directly owns 678,919 share shares of common stock and indirectly owns 2,586,420 shares of common stock as per Form 4 filings with SEC and as summarized below. 

 

 

 

 

 

Red Oak Partners, LLC ("ROP") serves as the general partner of The Red Oak Fund, LP, a Delaware limited partnership (the "Fund"), the direct owner of 1,165,223 shares. David Sandberg is the managing member of ROP and the Fund's portfolio manager.

 

 

 

 

 

ROP serves as a managing member of Pinnacle Capital Partners, LLC, a Florida limited liability company ("Pinnacle Partners"). Pinnacle Partners is the general partner of Pinnacle Opportunities Fund, LP, a Delaware limited partnership ("Pinnacle Fund"), the direct owner of 766,968 shares.

 

 

 

 

 

ROP serves as the general partner of The Red Oak Long Fund, LP, a Delaware limited partnership (the "Long Fund"), the direct owner of 587,626 shares. David Sandberg is the managing member of ROP and the Long Fund's portfolio manager.

 

 

 

 

 

ROP serves as the general partner of The Red Oak Institutional Founders Long Fund, LP, a Delaware limited partnership (the "Founders Fund"), the direct owner of 66,603 shares. David Sandberg is the managing member of ROP and the Founders Fund's portfolio manager.

 

 

 

 

(2)

Includes shares of common stock held by Wynnefield Partners Small Cap Value, L.P. and Wynnefield Small Cap Value Offshore Fund, Ltd. and Wynnefield Capital, Inc. Profit Sharing Plan as disclosed in Schedule 13D/A filed with SEC on May 12, 2015.

     

 

(3)

Represents stock options or restricted stock units that are or will be exercisable, or that will vest, as applicable, within 60 days after February 23, 2018.

  

 

Equity Compensation Plan Information

 

The Company maintains the SMTC Corporation 2010 Incentive Plan (the “2010 Plan”), which was adopted by the Board of Directors and approved by the stockholders of the Company in July 2010. In July 2010, the plan authorized an initial limit of 350,000 shares. In the years 2011 to 2015, the authorized number of shares increased by 1,944,022 under the 2010 Plan as approved by the Board of Directors and approved by the stockholders, in addition to annual increases authorized based on the evergreen annual increase formula of the 2010 Plan. In 2016, the Company’s stockholders approved an increase in the number of shares available for issuance under the 2010 Plan by 1,500,000 shares. The evergreen annual increases based on the formula of the 2010 Plan was 182,171 shares in 2016 and 194,394 shares in 2017. The total number of shares remaining available for future issuance under the 2010 Plan as at December 31, 2017 is 1,148,459.

 

The following table gives information about awards under the 2010 Plan as of December 31, 2017:

 

Plan Category

 

Number of

shares to be
issued upon

exercise of
outstanding

options,
warrants and

rights

 

 

Weighted

average

exercise
price of

outstanding
options,

warrants and

rights (1)

 

 

Number of

shares

remaining
available for

future issuance
under equity

compensation

plans

(excluding

shares
reflected in

column a)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equity compensation plans approved by stockholders

 

 

2,446,777

 

 

$

1.39

 

 

 

1,148,459

 

Equity compensation plans not approved by stockholders

 

 

 

 

$

 

 

 

 

Total

 

 

2,446,777

 

 

$

1.39

 

 

 

1,148,459

 

 

(1) The weighted average exercise price only applies to the 1,870,753 of outstanding stock options as there is no exercise price on the 576,024 outstanding RSUs.

 

59

 

 

Item 13.

Certain Relationships and Related Transactions and Director Independence

 

Director Independence

 

See the information disclosed under “Director Independence” in Item 10. “Directors, Executive Officers and Corporate Governance” in this Form 10-K.

 

 

 Related Person Transactions

 

The Company uses a combination of Company policies and established review procedures, including adherence to NASDAQ Rules, to ensure related person transactions are reviewed, approved and ratified, as appropriate. We do not maintain these policies and procedures under a single written policy.

 

The Nominating and Corporate Governance Committee is responsible for considering and reporting to the Board any questions of possible conflicts of interest involving the Company’s directors. The Board of Directors is further required to meet the independence standards set forth in the NASDAQ Rules. The Company’s Corporate Code of Ethics and Conduct, which applies to all directors, officers and employees, provides guidance on matters such as conflicts of interest and purchasing integrity, among others.

 

We require that each director and officer complete a questionnaire annually. The questionnaire requires positive written affirmation regarding related person transactions that may constitute a conflict of interest, including: any transaction or proposed transaction in excess of $120,000 involving the director or officer or an immediate family member and the Company, a subsidiary or any pension or retirement savings plan; any indebtedness to the Company; dealings with competitors, suppliers or customers; any interest in real or personal property in which the corporation also has an interest; and the potential sale of any real or personal property or business venture or opportunity that will be presented to the Company for consideration. We review each questionnaire to identify any transactions or relationships that may constitute a conflict of interest, require disclosure, or affect an independence determination.

 

For situations in which it is either clear that a conflict of interest exists or there is a potential conflict of interest, the related director or officer is obligated to recuse himself from any discussion on the business arrangement. That director or officer does not participate in the review and approval process for the related transaction.

 

The Compliance Officer, together with our Chief Executive Officer, or the Nominating and Corporate Governance Committee and Board of Directors review transactions involving directors and/or officers that either clearly represent or may represent a conflict of interest. They determine whether these transactions are on terms that are as fair as if the transactions were on an arm’s length basis. If the Compliance Officer and the Nominating and Corporate Governance Committee were to determine that a transaction is not on terms that are as fair as if it were on an arm’s length basis, the transaction would be modified such that the transaction has as fair as if it were on an arm’s length basis.

 

There were no transactions required to be reported under Item 404(a) of Regulation S-K or that were required to be reviewed pursuant to the above policies and procedures.

 

60

 

 

Item 14.

Principal Accounting Fees and Services

 

Set forth below are the fees incurred by the Company to its independent registered public accounting firm, PricewaterhouseCoopers LLP, for the fiscal years indicated.

 

   

2017

   

2016

 

Audit fees

  $ 458,535     $ 325,556  

Audit related fees

    -       24,775  

Tax fees

    153,885       117,290  

All other fees

    -       -  
                 

Total fees

  $ 612,420     $ 467,621  

 

The amounts are presented in USD and converted using average twelve month exchange rate of USD $1.00 to CAD $1.30 and USD $1.00 to CAD $1.30 for fiscal years 2017 and 2016, respectively.

 

Audit Fees — Consists of fees for professional services rendered in connection with the audit of our annual financial statements, the review of the interim financial statements included in our quarterly reports on Form 10-Q, and other services provided in connection with statutory and regulatory filings.

 

Audit Related Fees — Consists of fees for professional services related to the performance of the audit of the Company’s consolidated financial statements and the reviews of the Company’s quarterly results of operations and quarterly reports on Form 10-Q that are not included as part of audit fees. 

 

Tax Fees — Consists of fees for professional services related to tax compliance, planning and consulting services.

 

Audit Committee Pre-Approval Policies and Procedures; Determination of Independence

 

The Audit Committee’s charter provides that the Audit Committee will pre-approve all audit, audit related and non-audit services to be provided by our independent registered public accounting firm before the independent registered public accounting firm is engaged to render these services. The Audit Committee has considered whether the independent registered accounting firm’s provision of non-audit services is compatible with its independence. In April 2004, the Board adopted an Audit and Non-Audit Services Pre-Approval Policy for the Audit Committee. Under this policy, the Audit Committee has pre-approved certain audit and audit related services, tax services and other services. The Audit Committee has determined that the provision of those services that are pre-approved in this policy will not impair the independence of the Company’s independent registered public accounting firm. The provision of services by the independent registered public accounting firm that are not pre-approved in this policy are subject to separate pre-approval by the Audit Committee. This policy also pre-approved specified fee levels for the specific services. Payments in excess of these specified fee levels are subject to separate pre-approval by the Audit Committee. All audit and non-audit services performed by our independent registered public accounting firm have been pre-approved by our Audit Committee to assure that such services do not impair the independent registered public accounting firm’s independence from the Company.

 

61

 

 

PART IV

 

Item 15.

Exhibits, Financial Statement Schedules

 

(a) (1) Financial Statements.

 

The consolidated financial statements filed as part of this Report are listed and indexed at page F-1.

 

(a) (2)  Financial Statement Schedule.  

 

All schedules have been omitted because they are not required or applicable under the instructions or because the information required is included in the consolidated financial statements or notes thereto. 

 

(a) (3)  Exhibits.

 

See exhibit index beginning at page 64.

 

 

Item 16.

Form 10-K Summary

 

Not Applicable.

 

62

 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

 SMTC CORPORATION

 

 

 

 

 

 

 

 

 

 

By:

 /s/ Edward Smith 

 

 

 

Edward Smith

 

 

 

President and Chief Executive Officer

 

 

Date: March 8, 2018

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.

 

 

Signature

 

Title

 

Date

  

 

  

 

  

/s/ Edward Smith 

 

 

 

 

 Edward Smith

 

President, Chief Executive

 

March 8, 2018

  

 

Officer and

 

  

  

 

Director (Principal Executive Officer)

 

 

/s/ Roger Dunfield

 

 

 

 

 Roger Dunfield

 

Chief Financial Officer (Principal Officer

 

March 8, 2018

  

 

  Financial and Principal Accounting

 

  

  

 

 Officer)

 

 

 

 

 

 

 

/s/ Clarke Bailey

 

 

 

 

 Clarke Bailey

 

Chair of the Board of Directors

 

March 8, 2018

  

 

  

 

  

 /s/ David Sandberg

 

 

 

 

 David Sandberg 

 

Director

 

March 8, 2018

  

 

  

 

  

 /s/ Frederick Wasserman

 

 

 

 

 Frederick Wasserman

 

Director

 

March 8, 2018

 

 

 

 

 

 

 

 

 

 

/s/ Randy Waterfield 

 

 

 

 

 Randy Waterfield

 

Director

 

March 8, 2018

  

63

 

 

 EXHIBIT INDEX

 

Listed below are all exhibits filed as part of this Annual Report on Form 10-K. Certain exhibits are incorporated herein by reference to (i) the Registrant’s Registration Statement on Form S-1 originally filed on March 24, 2000 (File No. 333-33208), and (ii) documents previously filed by the Company with the Securities and Exchange Commission under the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended.

 

Exhibit #

 

Description 

  

 

  

3.1

 

Amended and Restated Certificate of Incorporation of the Registrant. (3)

  

 

  

3.2

 

Certificate of Amendment to the Amended and Restated Certificate of Incorporation of the Registrant. (4)

  

 

  

3.3

 

Third Amended and Restated Certificate of Incorporation of the Registrant. (5)

  

 

  

3.4

 

Fourth Amended and Restated Certificate of Incorporation of the Registrant. (6)

  

 

  

3.5

 

Fifth Amended and Restated Certificate of Incorporation of the Registrant. (9)

  

 

  

3.6

 

Second Amended and Restated By-Laws of the Registrant. (9)

  

 

 

3.7

 

Amendment No. 1 to Second Amended and Restated By-Laws of the Registrant. (10)

  

 

  

4.1

 

Stockholders Agreement, dated as of November 22, 2000, by and among the Registrant and the Stockholders referred to therein. (2)

  

 

  

4.2

 

Form of Certificate Representing Shares of Common Stock of the Registrant. (1)

  

 

  

4.3

 

Tax Benefits Preservation Plan, dated as of December 29, 2014, by and between the Registrant and Computershare Inc., as Rights Agent. (14)

  

 

  

10.1#

 

2010 Incentive Plan of the Registrant. (17)

  

 

  

10.2

 

Revolving Credit and Security Agreement, dated as of September 14, 2011, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc., SMTC Manufacturing Corporation of Canada, PNC Bank Canada Branch, PNC Bank, National Association, and the other financial institutions which are now or which hereafter become a party thereto. (7)

     

10.3

 

Sixth Amendment to Revolving Credit and Security Agreement, dated as of April 7, 2014, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc., SMTC Manufacturing Corporation of Canada, PNC Bank Canada Branch, PNC Bank, National Association, and the other financial institutions which are now or which hereafter become a party thereto. (12)

     

10.4

 

Seventh Amendment to Revolving Credit and Security Agreement, dated as of September 24, 2014, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc., SMTC Manufacturing Corporation of Canada, PNC Bank Canada Branch, PNC Bank, National Association, and the other financial institutions which are now or which hereafter become a party thereto. (13)

  

 

 

10.5

 

Tenth Amendment to Revolving Credit and Security Agreement, dated as of January 29, 2016, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc., SMTC Manufacturing Corporation of Canada, PNC Bank Canada Branch, PNC Bank, National Association, and the other financial institutions which are now or which hereafter become a party thereto. (16)

 

10.6

 

Eleventh Amendment to Revolving Credit and Security Agreement, dated as of November 22, 2016, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc., SMTC Manufacturing Corporation of Canada, PNC Bank Canada Branch, PNC Bank, National Association, and the other financial institutions which are now or which hereafter become a party thereto. (18) 

 

64

 

 

10.7

 

Twelfth Amendment to Revolving Credit and Security Agreement, dated as of May 15, 2017, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc., SMTC Manufacturing Corporation of Canada, PNC Bank Canada Branch, PNC Bank, National Association, and the other financial institutions which are now or which hereafter become a party thereto. (20)

  

 

 

10.8

 

Third Amended and Restated US Loan Agreement, dated as of September 14, 2011, by and among SMTC Mex Holdings, Inc., SMTC Manufacturing Corporation of Massachusetts, Export Development Canada and the lenders party thereto from time to time. (7)

 

 

 

10.9

 

Stockholder Agreement, dated as of January 5, 2012, by and between the Registrant and Red Oak Partners, LLC. (8) 

     

10.10#

 

Employment Agreement, dated as of December 16, 2013, by and between the Registrant and Sushil Dhiman. (11)

 

 

 

10.11#

 

Form of Indemnification Agreement, dated as of September 23, 2014, by and between the Registrant and certain officers and directors. (15) 

  

 

 

10.12

 

Amended and Restated Term Note, dated as of November 22, 2016, by and among the Registrant, SMTC Manufacturing Corporation of California, SMTC Mex Holdings, Inc., ZF Array Technology, Incorporated, HTM Holdings, Inc. and PNC Bank, National Association. (18)

     

10.13#

 

Services Agreement, dated as of February 1, 2017, by and between the Registrant and Edward Smith. (19)

     

10.14#

 

Employment Agreement, dated as of January 22, 2016, by and between the Registrant and Roger Dunfield. (20)

     

10.15#

 

Amendment to Employment Agreement, dated as of May 15, 2017, by and between the Registrant and Roger Dunfield. (21).

     

10.16#

 

Employment Offer Letter, dated as of May 15, 2017, by and between the Registrant and Edward Smith. (21) 

     

10.17#

 

Employment Offer Letter, dated as of May 15, 2017, by and between the Registrant and Richard Fitzgerald. (21)

     

21.1*

 

Subsidiaries of the Registrant.

     

23.1*

 

Consent of Independent Registered Public Accounting Firm. 

     

31.1*

 

Certification of Edward Smith pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, dated March 8, 2018.

  

 

 

31.2*

 

Certification of Roger Dunfield pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, dated March 8, 2018.

  

 

 

32.1*

 

Certification of Edward Smith, pursuant to Section 1350, Chapter 63 of Title 18, United States Code, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, dated March 8, 2018.

  

 

  

32.2*

 

Certification of Roger Dunfield, pursuant to Section 1350, Chapter 63 of Title 18, United States Code, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, dated March 8, 2018. 

 

65

 

 

101.INS* XBRL Instance

101.SCH* XBRL Taxonomy Extension Schema

101.CAL* XBRL Taxonomy Extension Calculation

101.DEF* XBRL Taxonomy Extension Definition

101.LAB* XBRL Taxonomy Extension Labels

101.PRE* XBRL Taxonomy Extension Presentation

 

(1)

Filed as an Exhibit to Amendment No. 2 to the Registrant’s Registration Statement on Form S-1 filed on June 19, 2000 (File No. 333-33208) and incorporated by reference herein.

(2)

Filed as an Exhibit to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2000 filed on April 2, 2001 (File No. 0-31051) and incorporated by reference herein.

(3)

Filed as an Exhibit to Amendment No. 1 to the Registrant’s Registration Statement on Form S-1 filed on June 25, 2004 (File No. 333-115400) and incorporated by reference herein.

(4)

Filed as an Exhibit to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2004 filed on April 15, 2005 (File No. 0-31051) and incorporated by reference herein.

(5)

Filed as an Exhibit to the Registrant’s Quarterly Report on Form 10-Q for the period ended September 28, 2008 filed on November 12, 2008 (File No. 0-31051) and incorporated by reference herein.

(6)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on July 10, 2009 (File No. 0-31051) and incorporated by reference herein.

(7)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on October 3, 2011 (File No. 0-31051) and incorporated by reference herein.

(8)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on January 11, 2012 (File No. 0-31051) and incorporated by reference herein.

(9)

Filed as an Appendix to the Registrant’s Definitive Notice and Proxy Statement on Form DEF14A filed on June 5, 2012 (File No. 0-31051) and incorporated by reference herein.

(10)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on January 24, 2013 (File No. 0-31051) and incorporated by reference herein.

(11)

Filed as an Exhibit to the Registrant’s Annual Report on Form 10-K for the year ended December 29, 2013 filed on April 14, 2014 (File No. 0-31051) and incorporated by reference herein.

(12)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on April 11, 2014 (File No. 0-31051) and incorporated by reference herein.

(13)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on September 30, 2014 (File No. 0-31051) and incorporated by reference herein.

(14)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on December 30, 2014 (File No. 0-31051) and incorporated by reference herein.

(15)

Filed as an Exhibit to the Registrant’s Annual Report on Form 10-K for the year ended December 28, 2014 filed on March 30, 2015 (File No. 0-31051) and incorporated by reference herein.

(16)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed February 17, 2016 (File No. 0-31051) and incorporated by reference herein.

(17)

Filed as an Exhibit A to the Registrant’s Definitive Notice and Proxy Statement on Form DEF14A filed on June 10, 2016 (File No. 0-31051) and incorporated by reference herein.

(18)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed November 22, 2016 (File No. 0-31051) and incorporated by reference herein.

(19)

Filed as an Exhibit to the Registrant’s Current Report on Form 8-K filed on February 2, 2017 (File No. 0-31051) and incorporated by reference herein.

(20) Filed as an Exhibit to the Registrant's Current Report on Form 10-K for the year ended January 1, 2017 filed on March 9, 2017 (File No. 0-31031) and incorporated by reference herein.

(21)

Filed as an Exhibit to the Registrant’s Quarterly Report on Form 10-Q for the period ended April 2, 2017 filed on May 17, 2017 (File No. 0-31051) and incorporated by reference herein.

 

*

Filed herewith

#

Indicates exhibits that are management contracts or compensation plans or arrangements 

 

66

 

 

SMTC CORPORATION  

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

 

Report of Independent Registered Public Accounting Firm

F-2

Consolidated Balance Sheets as of December 31, 2017 and January 1, 2017

F-3

Consolidated Statements of Operations and Comprehensive Loss for the years January 2, 2017 to December 31, 2017, January 4, 2016 to January 1, 2017, and from December 29, 2014 to January 3, 2016

F-4

Consolidated Statements of Changes in Shareholders’ Equity for the years from January 2, 2017 to December 31, 2017, January 4, 2016 to January 1, 2017, and from December 29, 2014 to January 3, 2016

F-5

Consolidated Statements of Cash Flows for the years from January 2, 2017 to December 31, 2017, January 4, 2016 to January 1, 2017, and from December 29, 2014 to January 3, 2016

F-6

Notes to the Consolidated Financial Statements

F-7

 

 

 

 

Report of INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To the Shareholders and Board of Directors of
SMTC Corporation

 

Opinion on the Consolidated Financial Statements

 

We have audited the accompanying consolidated balance sheets of SMTC Corporation and its subsidiaries, (together, the Company) as of December 31, 2017 and January 1, 2017, and the related consolidated statements of operations and comprehensive loss, shareholders’ equity and cash flows for each of the years ended December 31, 2017, January 1, 2017 and January 3, 2016, including the related notes (collectively referred to as the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2017 and January 1, 2017, and their results of operations and their cash flows for each of the years ended December 31, 2017, January 1, 2017 and January 3, 2016 in conformity with accounting principles generally accepted in the United States of America (US GAAP).

 

Basis for Opinion

 

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits of these consolidated financial statements in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

 

/s/ PricewaterhouseCoopers LLP

 

Chartered Professional Accountants, Licensed Public Accountants

 

Oakville, Ontario, Canada

March 8, 2018

 

We have served as the Company's auditor since 2014.

 

F-2

 

 

SMTC CORPORATION

Consolidated Balance Sheets

(Expressed in thousands of U.S. dollars)

 

 
   

December 31,

2017

   

January 1,

2017

 

Assets

               

Current assets:

               

Cash

  $ 5,536     $ 8,503  

Accounts receivable—net (note 4)

    29,093       22,624  

Inventories (note 4)

    22,363       20,674  

Prepaid expenses and other assets

    2,142       2,453  

Derivative assets (note 8)

    37        

Income taxes receivable (note 9)

    17       17  
      59,188       54,271  

Property, plant and equipment—net (note 4)

    10,269       14,437  

Deferred income taxes—net (note 9)

    305       226  

Deferred financing costs—net

    94       70  
    $ 69,856     $ 69,004  
                 

Liabilities and Shareholders’ Equity

               

Current liabilities:

               

Revolving credit facility (note 5)

  $ 12,191     $ 2,731  

Accounts payable

    25,028       23,078  

Accrued liabilities (note 4)

    4,877       4,604  

Derivative liabilities (note 8)

    375       1,256  

Income taxes payable (note 9)

    48       190  

Current portion of long-term debt (note 5)

    2,000       2,000  

Current portion of capital lease obligations (note 5)

    174       389  
      44,693       34,248  

Long-term debt (note 5)

    6,000       8,000  

Capital lease obligations (note 5)

    89       269  
                 

Shareholders’ equity:

               

Capital stock (note 6)

    396       391  

Additional paid-in capital

    265,355       264,928  

Deficit

    (246,677 )     (238,832

)

      19,074       26,487  
    $ 69,856     $ 69,004  

Commitments and contingencies (note 12)

 

See accompanying notes to consolidated financial statements.

 

F-3

 

 

SMTC CORPORATION

Consolidated Statements of Operations and Comprehensive Loss

(Expressed in thousands of U.S. dollars, except number of shares and per share amounts)

 

 
   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Revenue

  $ 139,231     $ 167,868     $ 220,616  

Cost of sales (note 8)

    128,380       152,841       202,899  

Gross profit

    10,851       15,027       17,717  
                         

Expenses:

                       

Selling, general and administrative expenses (note 15)

    13,960       14,013       15,863  

Restructuring charges (note 14)

    1,732       176        

Impairment of property, plant and equipment (note 4)

    1,601              

(Gain) loss on disposal of property, plant and equipment

    (60 )     (5

)

    2  

Operating earnings (loss)

    (6,382 )     843       1,852  

Interest expense, net (note 4)

    903       788       1,183  

Earnings (loss) before income taxes

    (7,285 )     55       669  

Income tax expense (note 9)

                       

Current

    639       161       597  

Deferred

    (79 )     126       76  
      560       287       673  

Net loss and comprehensive loss

  $ (7,845 )   $ (232

)

  $ (4

)

                         

Basic loss per share

  $ (0.47 )   $ (0.01

)

  $ (0.00

)

                         

Diluted loss per share

  $ (0.47 )   $ (0.01

)

  $ (0.00

)

Weighted average number of shares outstanding (note 10)

                       

Basic

    16,788,231       16,504,106       16,421,478  

Diluted

    16,788,231       16,504,106       16,421,478  

 

See accompanying notes to consolidated financial statements.

 

F-4

 

 

SMTC CORPORATION

Consolidated Statements of Changes in Shareholders’ Equity

(Expressed in thousands of U.S. dollars except for number of shares 

 

 
   

Common

Shares

   

Capital
stock

   

Additional
paid-in
capital

   

Deficit

   

Total
Shareholders’
equity

 
                                         

Balance, December 28, 2014

    16,417,276     $ 390     $ 263,996     $ (238,596

)

  $ 25,790  

Conversion of restricted stock units

    67,779       1       (1

)

           

Stock-based compensation

                510             510  

Net loss for the year

                      (4

)

    (4

)

Balance, January 3, 2016

    16,485,055     $ 391     $ 264,505     $ (238,600

)

    26,296  

 

 

   

Common

Shares

   

Capital
stock

   

Additional
paid-in
capital

   

Deficit

   

Total
Shareholders’
equity

 
                                         

Balance, January 3, 2016

    16,485,055     $ 391     $ 264,505     $ (238,600

)

  $ 26,296  

Conversion of exchangeable shares

    25,125                          

Stock-based compensation

                423             423  

Net loss for the year

                      (232

)

    (232

)

Balance, January 1, 2017

    16,510,180     $ 391     $ 264,928     $ (238,832

)

    26,487  

 

 

   

Common

Shares

   

Capital
stock

   

Additional
paid-in
capital

   

Deficit

   

Total
Shareholders’
equity

 
                                         

Balance, January 1, 2017

    16,510,180     $ 391     $ 264,928     $ (238,832

)

  $ 26,487  

Conversion of restricted stock units

    482,447       5       (5 )            

Stock-based compensation

                432             432  

Net loss for the year

                      (7,845 )     (7,845 )

Balance, December 31, 2017

    16,992,627     $ 396     $ 265,355     $ (246,677 )   $ 19,074  

 

See accompanying notes to consolidated financial statements. 

 

F-5

 

 

SMTC CORPORATION

Consolidated Statements of Cash Flows

(Expressed in thousands of U.S. dollars)

 

 
   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Cash provided by (used in):

                       
                         

Operations:

                       

Net loss

  $ (7,845 )   $ (232

)

  $ (4

)

                         

Items not involving cash:

                       
                         

Depreciation

    3,588       4,110       3,967  

Unrealized gain on unsettled forward exchange contracts

    (918 )     (831

)

    (616

)

Impairment of property, plant and equipment

    1,601              

Deferred income taxes

    (79 )     126       76  

Amortization of deferred financing fees

    27       69       32  

Stock-based compensation

    432       423       510  

(Gain) loss on sale of property, plant and equipment

    (60 )     (5

)

    2  
                         

Change in non-cash operating working capital:

                       
                         

Accounts receivable

    (6,469 )     7,261       1,139  

Inventories

    (1,689 )     5,203       5,713  

Prepaid expenses and other assets

    311       (470

)

    152  

Income taxes receivable/payable

    (142 )     132       (49

)

Accounts payable

    2,159       (7,998

)

    1,439  

Accrued liabilities

    237       (927

)

    (1,483

)

      (8,847 )     6,861       10,878  
                         

Financing:

                       

Net (repayment) advances of revolving credit facility

    9,460       (7,990

)

    (10,649

)

(Repayment) advances of long-term debt

    (2,000 )     5,000       5,000  

Principal payment of capital lease obligations

    (395 )     (611

)

    (1,086

)

Proceeds from sale and leaseback

          509        

Deferred financing costs

    (51 )     (71

)

    (10

)

      7,014       (3,163

)

    (6,745

)

                         

Investing:

                       
                         

Restricted cash - guaranteed deposit

          805       (805

)

Purchase of property, plant and equipment

    (1,471 )     (2,225

)

    (2,682

)

Proceeds from leasehold improvement

    56              

Proceeds from sale of property, plant and equipment

    281       126       6  
      (1,134 )     (1,294

)

    (3,481

)

                         

(Decrease) increase in cash

    (2,967 )     2,404       652  

Cash, beginning of year

    8,503       6,099       5,447  

Cash, end of the year

  $ 5,536     $ 8,503     $ 6,099  
                         

Supplemental Information:

                       

Cash interest paid

  $ 834     $ 761     $ 1,065  

Cash taxes paid

  $ 786     $ 444     $ 591  

Cash taxes refunded

  $     $ 442     $  

Property, plant and equipment acquired through capital lease

  $     $ 533     $  

Property, plant and equipment acquired that was unpaid in cash and included in accounts payable and accrued liabilities

  $ 23     $ 247     $ 247  

 

 See accompanying notes to consolidated financial statements.

 

F-6

 

 

SMTC CORPORATION

 NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

(Expressed in thousands of US. dollars, except numbers of shares and per share amounts)

 

 

1.

Nature of the business

 

SMTC Corporation (the “Company”) is a provider of end-to-end electronics manufacturing services, or EMS, including product design and sustaining engineering services, printed circuit board assembly, or PCBA, production, enclosure fabrication, cable assembly, systems integration and comprehensive testing services, configuration to order, build to order and direct order fulfilment. SMTC facilities span a broad footprint in the United States, Mexico, and China, with approximately 1,171 employees of which 1,110 are full-time employees. SMTC’s services extend over the entire electronic product life cycle from the development and introduction of new products through to growth, maturity and end of life phases. SMTC offers fully integrated contract manufacturing services to global original equipment manufacturers, or OEMs, and technology companies primarily within the industrial, computing and communications, power and energy and medical market segments. In addition, the Company operates an international sourcing and procurement office in Hong Kong.

 

The Company’s financial reporting year is a 52 or 53 week fiscal period, ending on the Sunday nearest December 31. Accordingly, the consolidated statements of operations and comprehensive loss, the consolidated statements of changes in shareholders’ equity, and consolidated statements of cash flows are reported for the periods from January 2, 2017 to December 31, 2017 (“year ended December 31, 2017”), January 4, 2016 to January 1, 2017 (“year ended January 1, 2017”), and December 29, 2014 to January 3, 2016 (“year ended January 3, 2016”).

 

  

 

2.

Assessment of Liquidity Risk

 

The Company has experienced declining revenue in fiscal 2016 and 2017 which has impacted its liquidity and cash flows. The Company incurred a net loss of $232 for the fiscal 2016 and a net loss of $7,845 in fiscal 2017. Revenues have declined due to the loss of customers that represented a large concentration of the Company’s business. This decline in revenues directly impacted the Company’s gross profit and its ability to generate positive cash flows from operations.

 

In light of these events, on May 15, 2017, the Board of Directors approved a corporate restructuring plan (the “Restructuring Plan”) which included the closure of the Suzhou, China facility and global headcount reductions. These reductions resulted in cost savings, which were partially offset by new hires to the leadership team made during 2017. Management believes the Restructuring Plan has stabilized the operations and delivered cost savings during the last six months of 2017.   

 

Concurrent with the Restructuring Plan, the Company also negotiated a Twelfth Amendment to the PNC Facilities (as defined in Note 5), which amended its financial covenant requirement for the quarter ended April 2, 2017 and adjusted the financial covenant requirements for future periods (refer to Note 5).

 

As at December 31, 2017, the Company’s liquidity is comprised of $5,536 in cash on hand and $5,295 of funds available to borrow under the PNC Revolving Credit Facility (as defined in Note 5). The Company is in compliance with the financial covenants included in the PNC Facilities as at December 31, 2017. Based on management’s updated forecasted cash flows, the Company anticipates that it will continue to be in compliance with the amended financial covenants in the PNC Facilities for fiscal 2018 and beyond.  


      Management believes that with the completion of the Restructuring Plan and its related cost savings, the revenue growth since the implementation of the Restructuring Plan and the cash available under its PNC Facilities, the Company will be able to satisfy its liquidity needs, for at least but not limited to, the twelve months from the issuance date of these financial statements.  

 

F-7

 

 

 

3.

Significant accounting policies

 

 

(i)

Basis of presentation

 

The Company’s accounting principles are in accordance with accounting principles generally accepted in the United States (“US GAAP”). These consolidated financial statements are presented in United States (“U.S.”) dollars.  

 

 

(ii)

Principles of consolidation      

 

The financial statements of entities which are controlled by the Company through voting equity interests, referred to as subsidiaries, are consolidated. The Company has no interests in Variable Interest Entities in any of the years presented as all subsidiaries are wholly-owned. Inter-company accounts and transactions are eliminated upon consolidation.

 

 

(iii)

Use of estimates

 

The preparation of financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the year. Significant estimates include, but are not limited to, deferred tax asset valuation allowance, impairment of long-lived assets and inventory valuation. These estimates and assumptions are based on management’s best estimates and judgment. Management evaluates its estimates and assumptions on an ongoing basis using historical experience and other factors, including the current economic environment. Actual results may differ from those estimates.

 

 

(iv)

Revenue recognition

 

Revenue is derived primarily from the sale of electronics components that are built to customer specifications. Revenue from the sale of products, including inventory held on consignment from customers, is recognized when goods are shipped to customers (FoB Shipping Point) once title has passed to the customer, persuasive evidence of an arrangement exists, price is fixed or determinable, performance has occurred, all customer-specified test criteria have been met and collectability is reasonably assured. Revenue recognized from consignment inventory sales consists of labor and overhead charges once performance has occurred, which is determined once the consignment inventory is shipped to the customer.

 

In addition, the Company has contractual arrangements with the majority of its customers that provide for customers to purchase any unused inventory that the Company has purchased to fulfill that customer’s forecasted manufacturing demand. Revenue from the sale of excess inventory to the customer is recognized when title passes to the customer which occurs when the inventory is shipped to the customer. The Company also derives revenue from engineering and design services. Service revenue is recognized as services are performed.

 

Sales taxes collected from customers and remitted to governmental authorities are presented on a net basis. 

 

 

 

 

(v)

Allowance for doubtful accounts

 

The allowance for doubtful accounts reflects management’s best estimate of probable losses inherent in the accounts receivable balance. Management determines the allowance based on factors such as the length of time the receivables have been outstanding, customer and industry concentrations, credit insurance coverage, the current business environment and historical experience.

 

F-8

 

 

 

(vi)

Inventories

 

Inventories are valued, on a first-in, first-out basis, at the lower of cost and replacement cost for raw materials and at the lower of cost and net realizable value for work in progress and finished goods. Work in progress and finished goods inventories include an application of relevant overhead. Fixed production overheads are allocated to inventory based on normal capacity of production facilities. The Company writes down estimated obsolete or excess inventory for the difference between the cost of inventory and estimated net realizable value based upon customer forecasts, shrinkage, the aging and future demand for the inventory, past experience with specific customers, and the ability to sell inventory back to customers or return to suppliers. If these assumptions change, additional write-downs may be required. Parts and other inventory items relate to equipment servicing parts that are capitalized to inventory and expensed as utilized to service the equipment. Parts inventory is valued at lower of cost and net realizable value. 

 

Consignment inventory received from customers has no value with the exception of labor and overhead charges on work in progress and finished goods consignment inventory.

 

 

(vii)

Property, plant and equipment

 

Plant and equipment are stated at cost less accumulated depreciation. Depreciation is generally calculated on a straight-line basis over the expected useful lives as follows:

 

Buildings (years)

5

20

Machinery and equipment (years)

7

15

Office furniture and equipment (years)

 

7

 

Computer hardware and software (years)

 

3

 

Leasehold improvements Over shorter of the lease term and estimated useful life

 

     Land is recorded at cost and is not depreciated.

 

 

(viii)

Income taxes

 

The Company accounts for income taxes using the asset and liability method. This approach recognizes the amount of taxes payable or refundable for the current year as well as deferred tax assets and liabilities for the future tax consequence of events recognized in the financial statements and tax returns. The effect of changes in tax rates is recognized in the year in which the rate change occurs.

 

In establishing the appropriate valuation allowances for deferred tax assets, the Company assesses its ability to realize its deferred tax assets based on available evidence, both positive and negative, to determine whether it is more likely than not that the deferred tax assets or a portion thereof will be realized.

 

The Company follows the guidance under Income Taxes ASC 740 with respect to accounting for uncertainty in income taxes recognized in the Company’s financial statements. This guidance prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return, and also provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosure and transition.

 

This guidance requires the Company to determine if it is more likely than not that the tax position will be sustained based on the technical merits of the position and for those tax positions that meet the more likely than not threshold, the Company would recognize the largest amount of tax benefit or obligation that is greater than fifty percent likely of being realized when ultimately settled with the tax authorities.

 

 

 

(ix)

Earnings per common share

 

Basic earnings per share is calculated using the weighted average number of common shares outstanding during the year. Diluted earnings per share is calculated using the weighted average number of common shares plus the dilutive potential common shares outstanding during the year. Anti-dilutive potential common shares are excluded. The treasury stock method is used to compute the potential dilutive effect of stock options and outstanding restricted stock units.

 

 

(x)

Translation of foreign currencies

 

The functional currency of the parent company and all foreign operations is the U.S. dollar. Monetary assets and liabilities denominated in foreign currencies are translated into U.S. dollars at the year-end rates of exchange. Non-monetary assets and liabilities denominated in foreign currencies are translated at historical rates and revenue and expenses are translated at average exchange rates prevailing during the month of the transaction. Exchange gains or losses are reflected in the consolidated statements of operations and comprehensive loss.

 

F-9

 

 

 

(xi)

Financial instruments

 

The Company accounts for derivative financial instruments (forward foreign exchange contracts) in accordance with applicable guidance. In accordance with these standards, all derivative instruments are recorded on the balance sheet at their respective fair values. Changes in fair value of derivatives that are not designated as hedges are recorded in the consolidated statement of operations and comprehensive loss as a component of cost of sales.

 

The carrying amounts of cash, accounts receivable, accounts payable and accrued liabilities approximate fair values due to the short-term nature of these instruments. The fair values of the revolving credit facility and capital lease obligations approximate the carrying values as the obligations bear rates currently available for debt with similar terms, maturities and credit rating.

   

 

(xii)

Shipping and handling costs

 

Shipping and handling costs are included as a component of cost of sales.

 

 

(xiii)

Stock-based compensation

 

The Company applies ASC 718, “Compensation – Stock Compensation”, (“ASC 718”) using a fair value based method for all outstanding awards. The fair value at grant date of stock options is estimated using the Black-Scholes option-pricing model, while the fair value of restricted stock units (“RSU’s) is based on the closing stock price at the date of grant. The fair value of stock options and RSU’s with a market-based performance condition is estimated using the Cox, Ross and Rubenstein binomial model (“Binomial Model”). Compensation expense is recognized over the stock option and RSU vesting period on a straight line basis. ASC 718 also requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

 

 

(xiv)

Fair Value Measurements

 

In accordance with ASC 820, “Fair Value Measurements and Disclosures”, (“ASC 820”), the Company determines fair value as an exit price, representing the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. ASC 820 establishes a hierarchical structure to prioritize the inputs to valuation techniques used to measure fair value into three tiers:

 

Level 1 - Quoted prices in active markets for identical assets or liabilities

Level 2 - Observable inputs other than quoted prices in active markets for identical assets and liabilities

Level 3 - No observable pricing inputs in the market (e.g., discounted cash flows)

 

Financial assets and financial liabilities are classified in their entirety based on the lowest level of input that is significant to the fair value measurements. The assessment of the significance of a particular input to the fair value measurements requires judgment, and may affect the valuation of the assets and liabilities being measured and their placement within the fair value hierarchy.

 

F-10

 

 

 

(xv)

Impairment of Property, Plant and Equipment 

 

The Company tests long-lived assets or asset groups held and used for recoverability when events or changes in circumstances indicate that their carrying amount may not be recoverable. Circumstances which could trigger a review include, but are not limited to: significant decreases in the market price of the asset; significant adverse changes in the business climate or legal factors; the accumulation of costs significantly in excess of the amount originally expected for the acquisition or construction of the asset; current period cash flow or operating losses combined with a history of losses or a forecast of continuing losses associated with the use of the asset; and a current expectation that the asset will more likely than not be sold or disposed significantly before the end of its estimated useful life. Recoverability is assessed based on the carrying amount of the asset and the sum of the undiscounted cash flows expected to result from the use and the eventual disposal of the asset. If the carrying value of the asset is not recoverable, the impairment loss is measured as the amount by which the carrying amount exceeds fair value. For assets classified as held for sale, an impairment loss is recognized when the carrying amount exceeds the fair value less costs to sell.

  

 

(xvi)

Restructuring Charges

  

Costs associated with restructuring activities are accounted for in accordance with ASC Topic 420, “Exit or Disposal Cost Obligations” (ASC 420), or ASC Topic 712, “Compensation – Nonretirement Postemployment Benefits” (ASC 712), as applicable. Under ASC 712, liabilities for contractual employee severance are recorded when payment of severance is considered probable and the amount can be estimated. Liabilities for restructuring costs other than employee severance are accounted for in accordance with ASC 420, only when they are incurred.

 

 

(xvii)

Post-employment benefits

 

The Company sponsors defined contribution pension plans and other post-employment benefit plans for certain employees. Contributions to the defined contribution pension plans are recognized as an expense as services are rendered by employees. The costs of the other post-employment benefit plans are actuarially determined. The liability recognized in the balance sheet in respect of the post-employment benefit plans for certain employees is the present value of the defined other post-employment benefit obligation at the end of the reporting period as determined by the Company’s actuary.

 

 

(xviii) 

Recently adopted Accounting Pronouncements

 

 

In July 2015, the FASB published ASU 2015-11: Simplifying the Measurement of Inventory (Topic 330). The amendments in this Update more closely align the measurement of inventory in U.S. GAAP with the measurement of inventory in International Financial Reporting Standards (IFRS). FASB has amended some of the other guidance in Topic 330 to more clearly articulate the requirements for the measurement and disclosure of inventory. However, the FASB does not intend for those clarifications to result in any changes in practice. Other than the change in the subsequent measurement guidance from the lower of cost or market to the lower of cost and net realizable value for inventory within the scope of this Update, there are no other substantive changes to the guidance on measurement of inventory. For public business entities, the amendments in this Update are effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. The adoption of ASU 2015-11 had no impact on the consolidated financial statements.

 

In November 2015, the FASB published ASU 2015-17: Income Taxes (Topic 740). The amendment requires that deferred tax assets and liabilities be classified as non-current in a classified statement of financial position. The amendments in this Update are effective for public business entities for financial statements issued for fiscal years beginning after December 15, 2016, and interim periods within those fiscal years. The adoption of ASU 2015-17 resulted in the presentation of the Company’s deferred tax assets as non-current. The deferred tax assets reported in the prior periods have been reclassified to conform to the current presentation.

 

In March 2016, the FASB published ASU 2016-09: Compensation – Stock Compensation (Topic 718). The amendment simplifies several aspects of accounting for share-based payment transactions including income tax consequences, classification of awards as either equity or liabilities, classification on the statement of cash flows and accounting for forfeitures. Some of the areas for simplification apply only to nonpublic entities. The amendments in this ASU are effective for public business entities for fiscal years beginning after December 15, 2016, and interim periods within those fiscal years. The adoption of ASU 2016-09 had no impact on the consolidated financial statements.

 

F-11

 

 

 Recent Accounting Pronouncements  

 

 

 In March 2016, the FASB published ASU 2016-08: Revenue from Contracts with Customers (Topic 606). The amendment clarifies the implementation guidance on principal versus agent considerations. In April 2016, the FASB published ASU 2016-10: Revenue from Contracts with Customers (Topic 606), which clarified application of the standard in identifying performance obligations and licensing arrangements. In May 2016, the FASB published ASU 2016-12: Revenue from Contracts with Customers (Topic 606), which included narrow-scope improvements and practical expedients. Specifically the update addresses application of collectability, presentation of sales taxes, noncash consideration, and completed contracts and contract modifications at transition. In May 2014, the FASB published ASU 2014-09: Revenue from Contracts with Customers (Topic 606), which supersedes (i) revenue recognition requirements in Topic 605 and most related industry-specific guidance, and (ii) cost guidance included in Subtopic 605-35, Revenue Recognition—Construction-Type and Production-Type Contracts, and amends existing requirements for recognition of a gain/loss on the transfer of nonfinancial assets that are not in a contract with a customer (for example, assets within the scope of Topic 360, Property, Plant, and Equipment, and intangible assets within the scope of Topic 350, Intangibles—Goodwill and Other) to be consistent with the new requirements. In August 2015, the FASB published ASU 2015-14 Topic 606 which effectively postponed the effective adoption requirement by one year such that the standard is effective for years beginning after December 15, 2017 including interim periods with those years.

 

We have evaluated and performed an analysis of the new revenue standard in relation to our customer contracts and considered the potential impact on the timing of revenue recognition.  The Company has determined that the new revenue standard will primarily result in a change to the timing of the Company’s revenue recognition policy for our manufacturing services to “over time” model as products are manufactured as opposed to a “point in time” model upon delivery (which reflects the Company’s current revenue recognition policy).  The Company has determined the transitional adjustment upon adoption, will be to recognize contract assets for unbilled revenue with a corresponding reduction in finished goods and work-in-process inventory.  The Company estimates that the transitional adjustment may be material, however management has not quantified the final amount of this adjustment.  The Company has revenue for other goods and services that will continue to be recognized at a point in time, upon transfer of control of the product to the customer (i.e., effectively no change to current revenue recognition policy).  We are planning a modified retrospective adoption effective January 1, 2018.  Under this approach, prior financial statements presented will not be restated.

 

In January 2016, the FASB published ASU 2016-01: Financial Instruments - Overall (Topic 825-10). The amendment addresses certain aspects of recognition, measurement, presentation and disclosure of financial assets and liabilities. The amendments in this ASU are effective for public business entities for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The adoption of ASU 2016-01 is not expected to impact the consolidated financial statements.  

 

In February 2016, the FASB published ASU 2016-02: Leases (Topic 842). The amendment proposes that all lessees should recognize the assets and liabilities that arise from leases. Elections may be available for those leases with terms of 12 months or less. The amendment still retains the distinction between finance leases and operating leases. The amendments in this ASU are effective for public business entities for financial statements issued for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. The impact of the adoption of the standard is expected to result in the recognition of all leases with the corresponding assets and liabilities recorded in the consolidated financial statements. Management is currently evaluating the qualitative and quantitative impact of this standard.  

 

In May 2016, the FASB published ASU 2016-13 Financial Instruments – Credit losses (Topic 326): Measurement of Credit Losses on Financial Instruments. The main objective of this Update is to provide financial statement users with more decision-useful information about the expected credit losses on financial instruments and other commitments to extend credit held by a reporting entity at each reporting date. To achieve this objective, the amendments in this Update replace the incurred loss impairment methodology in current U.S. GAAP with a methodology that reflects expected credit losses and requires consideration of a broader range of reasonable and supportable information to inform credit loss estimates. The amendment is effective for years beginning after December 15, 2019 including interim periods with those years. Early adoption is permitted only for those annual reporting periods beginning on or after December 15, 2018. The Company continues to evaluate the impact of this accounting standard. The impact of adoption of the standard has not yet been determined. 

 

F-12

 

 

In August 2016, the FASB published ASU 2016-15 Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments. This Accounting Standards Update addresses the following eight specific cash flow issues: Debt prepayment or debt extinguishment costs; settlement of zero-coupon debt instruments or other debt instruments with coupon interest rates that are insignificant in relation to the effective interest rate of the borrowing; contingent consideration payments made after a business combination; proceeds from the settlement of insurance claims; proceeds from the settlement of corporate-owned life insurance policies (COLIs) (including bank-owned life insurance policies (BOLIs)); distributions received from equity method investees; beneficial interests in securitization transactions; and separately identifiable cash flows and application of the predominance principle. The amendment is effective for years beginning after December 15, 2017 including interim periods with those years. Early adoption is permitted. The adoption of ASU 2016-15 is not expected to impact the consolidated financial statements.  

 

In November 2016, the FASB published ASU 2016-18 Statement of Cash Flows (Topic 230): Restricted Cash. This update addresses the requirement that a statement of cash flows explain the change during the period in the total of cash, cash equivalents, and amounts generally described as restricted cash or restricted cash equivalents. Therefore, amounts generally described as restricted cash and restricted cash equivalents should be included with cash and cash equivalents when reconciling the beginning-of-period and end-of-period total amounts shown on the statement of cash flows. The amendment is effective for years beginning after December 15, 2017 including interim periods with those years. Early adoption is permitted. The impact of adoption of the standard is expected to result in a modification to the current presentation of the statement of cash flows such that restricted cash is not presented as an investing activity, but is presented as part of the net change in cash from beginning to the ending balance.

 

In January 2017, the FASB published ASU 2017- 01 Business Combinations (Topic 805). The objective of this update is to provide guidance is to amend and clarify the definition of a business. The amendments in this Update are effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The impact of adoption of the standard is currently not expected to impact the Company’s financial statements.

 

In May 2017, the FASB published ASU 2017- 09 Compensation - Stock Compensation (Topic 718). The objective of this update is to provide guidance about which changes to the terms or conditions of share-based payment award require an entity to apply modification accounting. The amendments in this Update are effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The impact of adoption of the standard is currently not expected to impact the Company’s financial statements.

 

 In August 2017, the FASB published ASU 2017-12 Derivatives and Hedging (Topic 815) Targeted Improvements to Accounting for Hedging Activities. The objective of this update is to improve the financial reporting of hedging relationships to better portray the economic results of an entity’s risk management activities in its financial statements. In addition to that main objective, the amendments in this Update make certain targeted improvements to simplify the application of the hedge accounting guidance in current GAAP based on the feedback received from preparers, auditors, users, and other stakeholders. The amendments in this Update are effective for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. The impact of adoption of the standard is currently not expected to impact the Company’s financial statements as it does not apply hedge accounting. However, if the Company were to apply hedge accounting, it may impact the way in which the Company identifies and discloses the underlying risks it hedges against.

 

F-13

 

 

 

4.

Consolidated financial statement details

 

The following consolidated financial statement details are presented as of the period end dates indicated for the consolidated balance sheets and for each of the periods indicated for the consolidated statements of operations and comprehensive loss.

 

Consolidated balance sheets

  

  

Accounts receivable—net:

 

   

December 31,

2017

   

January 1,

2017

 

Trade accounts receivable

  $ 28,793     $ 22,284  

Other receivables

    300       511  

Allowance for doubtful accounts

          (171

)

Accounts receivable—net

  $ 29,093     $ 22,624  

 

Inventories:

 

   

December 31,

2017

   

January 1,

2017

 

Raw materials

  $ 17,049     $ 14,863  

Work in process

    1,874       1,557  

Finished goods

    3,029       3,678  

Parts and other

    411       576  

Inventories

  $ 22,363     $ 20,674  

 

Inventories are recorded net of a provision for obsolescence as at December 31, 2017 and January 1, 2017 of $619 and $442 respectively. The increase in the provision for obsolescence was due primarily to an identified collection risk related to aged inventory for a small number of customers.  

 

F-14

 

 

Property, plant and equipment—net:

 

   

December 31,

2017

   

January 1,

2017

 

Cost:

               

Land

  $ 1,648     $ 1,648  

Buildings

    9,852       9,852  

Machinery and equipment (a) (b)

    30,319       31,615  

Office furniture and equipment

    534       556  

Computer hardware and software (b)

    3,173       3,544  

Leasehold improvements

    2,160       2,129  
      47,686       49,344  
                 

Less accumulated depreciation and impairment:

               

Land

           

Buildings

    (8,619 )     (8,174

)

Machinery and equipment (a) (b)

    (24,650 )     (22,460

)

Office furniture and equipment

    (413 )     (438

)

Computer hardware and software (b)

    (2,622 )     (2,842

)

Leasehold improvements

    (1,113 )     (993

)

      (37,417 )     (34,907

)

Property, plant and equipment—net

  $ 10,269     $ 14,437  

 

(a)

Included within machinery and equipment were assets under capital leases with costs of $533 and $2,193 and associated accumulated depreciation of $222 and $673 as of December 31, 2017 and January 1, 2017, respectively. The related depreciation expense for the year ended December 31, 2017 and January 1, 2017 was $162 and $673, respectively. An impairment charge of $97 was allocated to machinery and equipment under capital lease for the year ended December 31, 2017. During the year ended December 31, 2017, $1,660 machinery and equipment under capital lease was purchased and transferred to machinery and equipment owned.

 

(b)

In accordance with ASC 360-10, the Company is required to evaluate for impairment when events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Upon the occurrence of a triggering event, the Company assesses whether the estimated undiscounted cash flows expected from the use of the asset and the residual value from the ultimate disposal of the asset exceeds the carrying value. In the second quarter of 2017, the Company identified that operating results for its U.S. segment asset group did not meet its forecasted results, which was considered a triggering event related to its U.S. segment asset group. The Company estimated undiscounted cash flows and determined the carrying amounts exceeded the recoverable amount, and therefore performed a discounted cash flow analysis. The difference between the discounted cash flows and the carrying amount resulted in an impairment loss of $1,025 which was recorded in 2017. The net carrying amount of the U.S. asset group is $1,188. The estimate of discounted cash flows is sensitive to certain key assumptions, for instance, if our revenue projections are lower by 1%, the impairment would increase by $110. If there was a 1% increase in the weighted average cost of capital, the impairment would increase by $37. The Company calculated the impairment loss by discounting the future cash flows which was determined to represent the fair value of the asset group and deducted this from the carrying amount of the segment asset group. As at December 31, 2017 the Company did not identify any further triggering events related to the U.S. asset group.

   
  Additionally during the second quarter of 2017, the Company removed fully depreciated machinery and equipment that were no longer in use with a cost and accumulated depreciation value of $870. The China segment impaired machinery and equipment with net book value of $265, associated cost of $383 and accumulated depreciation value of $118. The China segment also impaired machinery and equipment with net book value of $181, associated cost of $472 and accumulated depreciation value of $291. The corporate segment also impaired computer hardware and software with net book value of $130, associated cost of $135 and accumulated depreciation of $5. A total impairment loss was recorded of $576 in the second quarter of 2017 related to the China and Corporate segments.
   
  As at December 31, 2017, the Company identified that operating results for its China segment asset group did not meet forecasted results, which was considered a triggering event related to its China segment asset group. The net carrying amount of the China asset group is $1,380. The Company estimated undiscounted cash flows and determined a recoverable amount of $1,410 in excess of the net carrying value, therefore no impairment loss was recorded in 2017. The key assumptions included in these cash flows are projected revenue based on management’s revised forecast and corresponding margins. The estimate of undiscounted cash flows are sensitive to these key assumptions, for instance, if our revenue projections are lower by 10%, the recoverable amount in excess of the carrying amount would be reduced to $1,060. As such, the Company continues to monitor for impairment triggers each quarter, which may result in future impairments in this asset group.

 

F-15

 

 

Accrued liabilities:

 

   

December 31,

2017

   

January 1,

2017

 

Customer-related

  $ 936     $ 898  

Payroll

    2,485       2,134  

Professional services

    328       281  

Restructuring

    109       27  

Vendor related

    493       613  

Other

    526       651  

Accrued liabilities

  $ 4,877     $ 4,604  

 

Consolidated statements of operations and comprehensive loss

 

Interest expense, net:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 
                         

Long-term debt

  $ 454     $ 222     $  

Revolving credit facility

    395       465       1,040  

Amortization of deferred financing costs

    27       69       32  

Obligations under capital lease

    27       67       116  

Interest earned on cash deposits

          (35

)

    (5

)

                         

Interest expense, net

  $ 903     $ 788     $ 1,183  

 

F-16

 

 

 

5.

Debt and capital leases

 

(a) Revolving credit and long-term debt facilities 

 

 

The Company borrows money under a Revolving Credit and Security Agreement with PNC Bank, National Association (“PNC”) which governs the PNC Revolving Credit Facility and the PNC Long-Term Debt Facility (“PNC Facilities”). The PNC Facilities have a term ending on January 2, 2021. Advances made under the PNC Revolving Credit Facility bear interest at the U.S. base rate plus 0.75%. The applicable interest rate for the PNC Long-Term Debt Facility is U.S. base rate plus 1.25%. The base commercial lending rate should approximate prime rate. The weighted average interest rate increased to 4.9% in 2017 compared to 4.2% in 2016.

 

As at December 31, 2017, the funds available to borrow under the PNC Revolving Credit Facility after deducting the current borrowing base conditions was $5,295 ( January 1, 2017 - $7,377). The maximum amount of funds that could be available under the PNC Revolving Credit Facility is $30,000. However, availability under the PNC Revolving Credit Facility is subject to certain conditions, including borrowing base conditions based on eligible inventory and accounts receivable, and certain conditions as determined by PNC. The Company is required to use a “lock-box” arrangement for the PNC Revolving Credit Facility, whereby remittances from customers are swept daily to reduce the borrowings under this facility.

 

On May 15, 2017, the Company entered into the Twelfth Amendment (“Twelfth Amendment”) of the Revolving Credit and Security Agreement, which was initially entered into on September 14, 2011 with PNC Bank, National Association, as agent for the Lender

 

Pursuant to the Twelfth Amendment, PNC has modified the definition of EBITDA (as defined in the Twelfth Amendment) to include additional exclusions and limits.

 

 In addition, the Lender has increased the interest rates by 0.25% during 2017 in accordance with the Twelfth Amendment; however if the Company maintains a specified fixed charge coverage ratio for a predetermined period of time and maintains its compliance with the terms of the PNC Facilities, interest rates will be reduced to the U.S. base rate plus 0.25% on advances made under the PNC Revolving Credit Facility and U.S. base rate plus 0.75% on advances made under the PNC Long-Term Debt Facility.

 

 The PNC Long-Term Debt Facility of $10,000 matures on January 2, 2021 with quarterly principal payments of $500 with the remaining balance due at maturity.

 

At December 31, 2017, $12,191 ( January 1, 2017 - $2,731) was outstanding under the PNC Revolving Credit Facility and is classified as a current liability based on the requirement to hold a “lock-box” under the terms of the PNC Revolving Credit Facility.

 

At December 31, 2017, $8,000 ( January 1, 2017, $10,000) was outstanding under the PNC Long-Term Debt Facility.

 

The PNC Facilities are a joint and several obligations of the Company and its subsidiaries that are borrowers under the facilities and are jointly and severally guaranteed by other subsidiaries of the Company. Repayment under the PNC Facilities is collateralized by the assets of the Company and each of its subsidiaries.

 

(b) Covenants

 

 

The Revolving Credit and Security Agreement contains certain financial and non-financial covenants.

 

As defined under the Twelfth Amendment, the Company was required to maintain a minimum EBITDA for the twelve months ended July 2, 2017 and the three months ended October 1, 2017. Subsequent thereafter, the financial covenant relating to a minimum consolidated fixed charge coverage ratio is in effect for the three months ended December 31, 2017, six months ended April 1, 2018, nine months ended July 1, 2018, twelve months ended September 30, 2018 and thereafter on a rolling twelve month basis until January 2, 2021.  The financial covenants also require that the Company limit unfunded capital expenditures (all as defined in the credit agreement governing the PNC Facilities). 

 

F-17

 

 

The Company is in compliance with the financial covenants included in the PNC Facilities as of December 31, 2017.

 

 

(c) Obligations under capital leases

 

Minimum lease payments for capital leases due within each of the next three years and thereafter consist of the following:

 

2018

    194  

2019

    81  

Thereafter

     

Total minimum lease payments

    275  

Amount representing interest of 6%

    (12

)

Present value of lease payments

    263  

Current portion of capital lease obligations

    174  

Long term capital lease obligations

  $ 89  

 

 

 

6.

Capital stock

 

Common shares

 

Authorized share capital:

 

The authorized share capital of the Company at December 31, 2017 and January 1, 2017 consisted of:

 

 

(i)

26,000,000 shares of common stock, par value $0.01 per share: Holders are entitled to one vote per share and the right to share in dividends pro rata subject to any preferential dividend rights of any then outstanding preferred stock.

 

 

(ii)

5,000,000 shares of preferred stock, par value $0.01 per share: From time to time the Company may issue preferred stock in one or more series and will fix the terms of that series at the time it is created. 500,000 shares of series A participating preferred stock, par value $0.01 per share authorized. As at December 31, 2017, there was no outstanding preferred stock. 

 

F-18

 

 

Issued and outstanding:

 

The outstanding number of common shares included in shareholders’ equity consisted of the following as at the following dates:

 

 

   

December 31, 2017

   

January 1, 2017

   

January 3, 2016

 
   

Number
of shares

   

$

   

Number
of shares

   

$

   

Number
of shares

   

$

 
                                                 

Common Stock

                                               
                                                 

Balance at beginning of the period

    16,510,180     $ 391       16,485,055     $ 391       16,417,276     $ 390  

Shares issued pursuant to:

                                               

Conversion of restricted stock units

    482,447       5       25,125             67,779       1  
                                                 

Balance at end of the year

    16,992,627     $ 396       16,510,180     $ 391       16,485,055     $ 391  
                                                 

Total Common Stock

          $ 396             $ 391             $ 391  

 

 Exchangeable shares:

 

During the year ended December 31, 2017, January 1, 2017 and January 3, 2016 there were no issued or outstanding exchangeable shares.

 

F-19

 

 

 

7.

Stock-based compensation

  

2010 Incentive Plan:

 

In July 2010, the Company approved a stock incentive plan, the 2010 SMTC Incentive Plan (the “2010 Plan”). The 2010 Plan permitted the issuance of up to 350,000 shares plus an additional number of shares determined by the Board of Directors but not to exceed 1% of the total number of fully diluted shares outstanding per year. Options vest over a one to three year period and expire five to ten years from their respective date of grant.

 

In the years 2011 to 2015, the authorized number of shares increased by 1,944,022 under the 2010 Plan as approved by the Board of Directors and approved by the stockholders, in addition to annual increases authorized based on the evergreen annual increase formula of the 2010 Plan. In 2016, the Company’s stockholders approved an increase in the number of shares available for issuance under the 2010 Plan by 1,500,000 shares. The evergreen annual increases based on the formula of the 2010 Plan was 182,171 shares in 2016 and 194,394 shares in 2017. The total number of shares remaining available for future issuance under the 2010 Plan as at December 31, 2017 is 1,148,459.

 

Stock options

 

The Company settles its stock options in shares of common stock. A summary of stock option activity under the Incentive Plans for the years ended January 3, 2016, January 1, 2017 and December 31, 2017 is as follows:

 

   

Total

Outstanding
options

   

Weighted
average

exercise
price

   

Aggregate

intrinsic
value

   

Weighted

average
remaining

contractual
term (years)

 

Outstanding balance at December 28, 2014

    817,212     $ 2.07                  

Options granted

        $                  

Options forfeited

    (95,431

)

  $ 2.03                  

Options expired

    (66,667

)

  $ 3.11                  

Options exercised

        $                  

Outstanding balance at January 3, 2016

    655,114     $ 1.98                  

Options granted

    387,255     $ 1.33                  

Options forfeited

    (363,847

)

  $ 1.46                  

Options expired

    (61,756

)

  $ 3.46                  

Options exercised

        $                  

Outstanding balance at January 1, 2017

    616,766     $ 1.82                  

Options granted

    1,468,716     $ 1.29                  

Options forfeited

    (40,722 )   $ 1.80                  

Options expired

    (174,007 )   $ 1.89                  

Options exercised

        $                  
                                 

Outstanding balance at December 31, 2017

    1,870,753     $ 1.39     $ 61       8.6  
                                 

Exercisable balance at December 31, 2017

    324,696     $ 1.86     $       5.1  

 

F-20

 

 

The estimated fair value of stock options is determined using the Black-Scholes option pricing model (excluding stock options that contain performance vesting conditions) and are amortized over the vesting period on a straight line basis. The Company estimates the expected term of the stock options based on evaluating historical exercise data. The Company considers exercise data based on employee behavior when developing the expected term assumptions. The computation of expected volatility is based on the Company’s historical volatility from its traded common stock over the expected term of the stock option grants. The interest rate for periods within the expected term of the award is based on the U.S. Treasury yield curve in effect at the time of grant. The following weighted average assumptions were used in calculating the estimated fair value of stock options used to compute stock-based compensation expenses:

 

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Black-Scholes weighted-average assumptions

                       
                         

Expected dividend yield

    N/A       0.0

%

    N/A  

Expected volatility

    N/A       43.8

%

    N/A  

Expected forfeiture

    N/A       29.0

%

    N/A  

Risk-free interest rate

    N/A       1.33

%

    N/A  

Expected stock option life in years

    N/A       4.0       N/A  
                         

Weighted-average stock option fair value per stock option granted

  $ N/A     $ 0.48     $ N/A  

 

Certain stock options granted during 2017 have market-based performance conditions such that tranches of stock awards vest and are issuable only if the Company’s common stock meets or exceeds a specified target market prices during the vesting period as defined by the administrator of the 2010 Plan. If the market-based performance conditions are not met during the option life (10 years), the stock options will not vest and will expire. These stock options with market-based performance conditions have been valued using the Binomial Model. The following weighted average assumptions were used in calculating the estimated fair value of awards with market-based performance conditions used to compute stock-based compensation expenses:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017 (1)

   

Year ended

January 3,

2016 (1)

 

Binomial Model weighted-average assumptions

                       
                         

Stock Price

    1.29       N/A       N/A  

Expected volatility

    43.0 %     N/A       N/A  

Expected forfeiture

    30.0 %     N/A       N/A  

Risk-free interest rate

    1.02 %     N/A       N/A  

Expected stock option life in years

    4.9       N/A       N/A  
                         

Weighted-average stock option fair value per award granted

  $ 0.30     $ N/A     $ N/A  

 

(1) No stock options with market-based performance conditions were granted in fiscal 2016 or 2015.

 

During the years ended December 31, 2017, January 1, 2017 and January 3, 2016, the Company recorded stock-based compensation expense and a corresponding increase in additional paid in capital of $75, $78 and $175, respectively.

 

During the years ended December 31, 2017, January 1, 2017 and January 3, 2016, 53,622, 112,739 and 257,430 options vested, respectively. As at December 31, 2017, compensation expense of $460 related to non-vested stock options has not been recognized.

 

F-21

 

 

The following table presents information about stock options outstanding as of December 31, 2017:

 

Outstanding
options

   

Weighted
average
exercise
price

   

Exercisable
options

   

Weighted
average
exercise
price

 
355,881       1.80       200,977       1.80  
50,000       2.02       50,000       2.02  
50,000       2.19       50,000       2.19  
71,156       1.33       23,719       1.33  
1,007,787       1.23              
335,929       1.26              
1,870,753     $ 1.39       324,696     $ 1.86  

 

 

 Restricted Stock Units

 

Restricted Stock Units (“RSU”) are settled in shares of common stock. RSUs are issued under the 2010 Plan and have same terms and conditions as other equity compensation awards issued under the 2010 Plan. RSUs are valued at the closing stock price on the date the RSUs are granted. RSUs have vesting terms of one to three years. The compensation expense is recorded on a straight line basis over the vesting period.

 

Certain RSUs granted during 2016 have market-based performance conditions such that the awards vest and are issuable only if the market price of the Company’s common stock meets or exceeds a specified target during the vesting period as defined by the administrator of the 2010 Plan. If the market-based performance condition is not met, the RSUs will not vest and will be forfeited. The RSUs with market-based performance conditions have been valued using the Binomial Model. The following weighted average assumptions were used in calculating the estimated fair value of awards with market-based performance conditions used to compute stock-based compensation expenses:

 

 

   

Year ended

December 31,

2017 (1)

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016 (1)

 

Binomial Model weighted-average assumptions

                       
                         

Stock Price

    N/A       1.34       N/A  

Expected volatility

    N/A       42.2 %     N/A  

Expected forfeiture

    N/A       29.0 %     N/A  

Risk-free interest rate

    N/A       0.60 %     N/A  

RSU term in years

    N/A       3.0       N/A  
                         

Weighted-average RSU fair value per award granted

  $ N/A     $ 0.42     $ N/A  

 

 

(1)

No RSU’s with market-based performance conditions were granted in 2017 or 2015. The RSU’s granted in 2017 only contained a time condition for vesting.

 

F-22

 

 

   

Outstanding

options

   

Weighted

average

stock

price

   

Weighted

average

remaining

contractual

term (years)

 
                         

Outstanding balance at December 28, 2014

    520,433     $ 1.94          

RSU granted

    91,818     $ 1.47          

RSU forfeited

    (64,908

)

  $ 1.89          

RSU converted into common shares

    (67,779

)

  $ 1.80          
                         

Outstanding balance at January 3, 2016

    479,564     $ 1.88       1.51  
                         

RSU granted

    987,764     $ 0.84          

RSU forfeited

    (352,077

)

  $ 0.87          

RSU converted into common shares

    (25,125

)

  $ 1.99          
                         

Outstanding balance at January 1, 2017

    1,090,126     $ 1.22       1.01  
                         

RSU granted

    229,950     $ 1.50          

RSU forfeited

    (261,606 )   $ 0.89          

RSU converted into common shares

    (482,447 )   $ 1.72          
                         

Outstanding balance at December 31, 2017

    576,023     $ 1.13       1.84  

 

During the periods ended December 31, 2017, January 1, 2017 and January 3, 2016, the Company recorded stock-based compensation expense and a corresponding increase in additional paid in capital of $357, $345, and $335, respectively, with respect to RSUs.

 

F-23

 

 

 

8.

Financial Instruments and Risks

 

Interest Rate Risk

 

The PNC Facilities bears interest at a floating rate. The weighted average interest rate incurred on the PNC Facilities for the year ended December 31, 2017 was 4.9%. Subject to the Twelfth Amendment, advances made under the PNC Revolving Credit Facility bear interest at the U.S. base rate plus 0.8%. The applicable interest rate for the PNC Long-Term Debt Facility is U.S. base rate plus 1.3%. The base commercial lending rate should approximate prime rate. At December 31, 2017, the interest rates on the PNC Revolving Credit Facility and the PNC Long-Term Debt Facility were 5.3% and 5.8%, respectively.

 

 

The impact of a 10% change in interest rates would not have a significant impact on our reported earnings.

 

Derivative Forward Contracts and Foreign Currency Exchange Risk

 

Given the Company’s global business operations, we are exposed to exchange rate fluctuations on expenditures denominated in foreign currencies. However, most of our sales and component purchases are denominated in U.S. dollars, which limits our foreign currency risk. Our foreign exchange risk relates primarily to our Canadian, Mexican and Asian payroll, Euro based component purchases and other operating expenses denominated in local currencies in our geographic locations. To mitigate this risk, the Company enters into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to forecasted Canadian dollar and Mexican peso. The strengthening of the Canadian dollar and Mexican peso would result in an increase in costs to the organization and may lead to a reduction in reported earnings.

 

The impact of a 10% change in exchange rates would be estimated to have the following impact on cost of sales for the Company:

 

10% increase in both the CAD and PESO foreign exchange rates (million)

  $ 0.7  

10% decrease in both the CAD and PESO foreign exchange rates (million)

  $ (0.9

)

 

The Company enters into forward foreign exchange contracts to reduce its exposure to foreign exchange currency rate fluctuations related to a portion of forecasted Canadian dollar denominated payroll, rent and utility cash flows for the seven months of 2018, and Mexican peso denominated payroll, rent and utility cash flows for the seven months of 2018. These contracts were effective economic hedges, but did not qualify for hedge accounting under ASC 815 “Derivatives and Hedging”. Accordingly, changes in the fair value of these derivative contracts were recognized into net loss in the consolidated statement of operations and comprehensive loss. The Company does not enter into forward foreign exchange contracts for trading or speculative purposes.

 

The following table (expressed in thousands of Canadian dollars and Mexican pesos) presents a summary of the outstanding foreign currency forward contracts as at December 31, 2017:

 

Currency

Buy/Sell

Foreign Currency Amount

 

Notional

Contract

Value in USD

 

Canadian dollar

Buy

CAD 1,940

 

$

1,509

 

Mexican peso

Buy

MXN 99,000

 

$

5,297

 

 

The unrealized gain recognized in earnings as a result of revaluing the outstanding instruments to fair value on December 31, 2017 was $918 (2016 – unrealized gain of $831) (2015 – unrealized gain of $616) which was recorded in cost of sales in the consolidated statement of operations and comprehensive loss. The realized loss on settled contracts during 2017 was $116 (2016 – realized loss $2,803) (2015 – realized loss $4,446), which was recorded in cost of sales in the consolidated statement of operations and comprehensive loss. Fair value was determined using the market approach with valuation based on market observables (Level 2 quantitative inputs in the hierarchy set forth under ASC 820 “Fair Value Measurements”).

 

F-24

 

 

   

December 31,

2017

   

January 1,

2017

 

Average USD:CAD contract rate

    1.29       1.34  

Average USD:CAD mark-to-market rate

    1.26       1.34  

Average USD:PESO contract rate

    18.69       18.47  

Average USD:PESO mark-to-market rate

    20.11       21.20  

  

 

The derivative asset as at December 31, 2017 was $37 ($Nil as at January 1, 2017 and January 3, 2016) and derivative liability as at December 31, 2017 was $375 ($1,256 as at January 1, 2017) ($2,087 as at January 3, 2016) which reflected the fair market value of the unsettled forward foreign exchange contracts.

 

Foreign exchange gains and losses are recorded in cost of sales in the consolidated statement of operations and comprehensive loss pertaining to translation of foreign denominated transactions during the period in addition to foreign denominated monetary assets and liabilities at the end of the reporting period. A total aggregate translated foreign exchange gain of $98 was recognized for the period ended December 31, 2017 ( January 1, 2017 – gain of $268, January 3, 2016 – gain of $347).

 

 

Credit Risk

 

     In the normal course of operations, there is a risk that a counterparty may default on its contractual obligations to us which would result in a financial loss that could impact our reported earnings. In order to mitigate this risk, we complete credit approval procedures for new and existing customers and obtain credit insurance where it is financially viable to do so given anticipated revenue volumes, in addition to monitoring our customers’ financial performance. We believe our procedures in place to mitigate customer credit risk and the respective allowance for doubtful accounts are adequate. During the year ended December 31, 2017, the Company recorded an additional provision for bad debt expense of $0.7 million related to one customer which experienced financial issues. The Company takes measures to reduce credit risk, these charges can have a material impact on our financial performance.

 

There is limited risk of financial loss or defaults on our outstanding forward currency contracts as the counterparty to the transactions had a Standard and Poor’s rating of A- or above as at December 31, 2017.

 

Liquidity Risk

 

         There is a risk that we may not have sufficient cash available to satisfy our financial obligations as they come due. The financial liabilities we have recorded in the form of accounts payable, accrued liabilities and other current liabilities are primarily due within 90 days with the exception of the current portion of capital lease obligations which could exceed 90 days and our PNC Revolving Debt Facility which utilizes a lock-box to pay down the obligation effectively daily. Principal payments for the PNC Long-Term Debt Facility are made on a quarterly basis. As at December 31, 2017, the Company’s liquidity is comprised of $5,536 in cash on hand and $5,295 of funds available to borrow under the PNC Revolving Credit Facility. We believe that cash flow from operations, together with cash on hand and our PNC Revolving Credit Facility, which has a maximum credit limit of $30,000 and PNC Long-Term Debt Facility of $10,000 are sufficient to fund our financial obligations. However, availability under the PNC Revolving Credit Facility is subject to certain conditions, including borrowing base conditions based on eligible inventory and accounts receivable, as determined by PNC.  

 

F-25

 

 

 

9.

Income taxes

 

The Company recorded the following income tax expense for the periods noted:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Current:

                       

Federal/State

  $ 18     $ (63

)

  $ 28  

Foreign

    621       224       569  
                         
      639       161       597  

Deferred:

                       

Federal

                 

Foreign

    (79 )     126       76  
                         
      (79 )     126       76  
                         

Income tax expense

  $ 560     $ 287     $ 673  

 

The overall income tax expense as recorded in the consolidated statements of operations varied from the tax expense calculated using U.S. federal and state income tax rates as follows for the periods noted:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Federal income tax expense (recovery)

  $ (2,550 )   $ 20     $ 234  

State income tax expense (recovery), net of federal tax benefit

    26       (62

)

    29  

Change in income tax rates due to tax reform

    7,944              

Loss (income) of foreign subsidiaries taxed at different rates

    333       (161

)

    113  

Change in valuation allowance

    (6,146 )     764       (2,205

)

Foreign Tax Credit

    302              

Reassessment of losses by tax authority

          (1,675

)

     

Deemed income inclusion of foreign subsidiary

    79       800       574  

Expiry of operating loss carry forwards

    441       439       843  

Permanent and other differences

    131       164       1,085  
                         

Income tax expense

  $ 560     $ 287     $ 673  

 

F-26

 

 

Income (loss) before income taxes consisted of the following for the periods noted:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Domestic (U.S.)

  $ (6,089 )   $ (3,710

)

  $ 3,205  

Foreign (Non U.S.)

    (1,196 )     3,765       (2,536

)

                         
    $ (7,285 )   $ 55     $ 669  

 

Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The Company’s deferred income tax liabilities and assets are comprised of the following at:

 

   

December 31,

2017

   

January 1,

2017

 

Deferred income tax assets:

               

Net operating loss carryforwards

  $ 18,425     $ 23,844  

Capital loss carryforwards

    3,563       3,563  

Tax credit carryforwards

    3,104       3,407  

Property, plant and equipment and other assets

    1,529       2,015  

Reserves, allowances and accruals

    1,441       1,301  
                 
      28,062       34,130  

Valuation allowance

    (27,757 )     (33,904

)

                 

Net deferred income tax assets

  $ 305     $ 226  

   

At December 31, 2017, the Company had total net operating loss carry forwards of $84.5 million, of which $53.5 million, $23.3 million and $7.7 million pertains to loss carry forwards from U.S., Canadian and Asian jurisdictions respectively. $5.2 million will expire between 2018 and 2022, $15.2 million will expire in 2023, $9.6 million will expire between 2025 and 2029, $19.8 million will expire in 2030, $24.2 million will expire between 2031 and 2033, $6.9 million will expire between 2034 and 2037 and the remainder of $3.6 million is available for indefinite carryforward.

 

At December 31, 2017 and January 1, 2017, the Company had no gross unrecognized tax benefits associated with uncertain tax positions. During 2016 the Company recognized tax benefits of $287 associated with uncertain tax positions which resulted in a favorable impact on the Company's effective tax rate.

 

F-27

 

 

Whether or not the recapitalization transactions undertaken in 2004 result in an ownership change for purposes of Section 382 of the Internal Revenue Code (“Section 382”), which imposes a limitation on a corporation’s use of NOL carry forwards following an “ownership change,” depends upon whether the exchangeable shares of SMTC Canada are treated as shares of the Company under U.S. tax principles. The Company has concluded that the recapitalization transactions did not result in an ownership change and as such the use of the NOL carry forwards has not been limited.

 

In assessing the realization of deferred tax assets, management considers whether it is more likely than not that some portion or all of its U.S. deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income. Management considers the scheduled reversal of deferred tax liabilities, change of control limitations, projected future taxable income and tax planning strategies in making this assessment. Guidance under ASC 740, Income Taxes, (“ASC 740”) states that forming a conclusion that a valuation allowance is not needed is difficult when there is negative evidence, such as cumulative losses in recent years in the jurisdictions to which the deferred tax assets relate. In 2017, management has concluded that a full valuation allowance continues to be recorded against the deferred tax assets associated with the U.S, Asian and Canadian jurisdictions as those assets are not likely to be realized.

 

On December 22, 2017, the Tax Cuts and Jobs Act (“TCJA”) was enacted, which includes a broad range of tax reform proposals, with many provisions significantly differing from current U.S. tax law. Management has considered the impact of these provisions, including a decrease in the federal corporate income tax rate, from 35% to 21% for years beginning after December 31, 2017, substantially reducing the value of the Company's deferred tax assets. The Company has recorded a corresponding reduction to its deferred tax assets of $8.0 as at December 31, 2017. The reduction in the Company's deferred tax assets is fully offset by a corresponding reduction to the valuation allowance.

 

F-28

 

 

 

10.

Earnings (loss) per share

 

The following table details the weighted average number of shares outstanding for the purposes of computing basic and diluted loss per share for:

 

Number of common shares

 

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Basic weighted average shares outstanding

    16,788,231       16,504,106       16,421,478  

Dilutive stock awards (a) (b)

                 
                         

Diluted weighted average shares outstanding

    16,788,231       16,504,106       16,421,478  

 


(a)

Dilutive stock awards include outstanding RSUs and in-the money stock options determined using the treasury stock method.

 

(b)

For the periods ended December 31, 2017, January 1, 2017and January 3, 2016, as a result of a net loss for the periods, dilutive earnings per share was calculated using the basic weighted average shares outstanding as the effect of potential common shares would have been anti-dilutive. Had there been net earnings, dilutive stock awards would have been calculated as 608,102 for the period ended December 31, 2017 (1,060,049 for the period ended January 1, 2017 and 479,564 for the period ended January 3, 2016).

 

F-29

 

 

 

11.

Segmented information

 

General description

 

The Company is operated and managed geographically and has production facilities in the United States, Mexico and China. The Company utilizes each reportable segment’s site contribution (site revenues minus operating expenses, excluding unrealized foreign exchange gain (loss) on unsettled forward foreign exchange contracts, corporate allocations and restructuring expenses) to monitor reportable segment performance. Site contribution is utilized by the chief operating decision-maker (defined as the Chief Executive Officer) as the indicator of reportable segment performance, as it reflects costs which our operating site management is directly responsible for. Intersegment adjustments reflect intersegment sales that are generally recorded at prices that approximate arm’s-length transactions. In assessing the performance of the reportable segments, management attributes site revenue to the reportable segment that ships the product to the customer, irrespective of the product’s destination. Information about the reportable segments is as follows: 

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Revenues

                       

Mexico

  $ 99,577     $ 102,546     $ 142,738  

US

    21,269       21,703       33,088  

China

    27,349       52,745       55,155  

Total

  $ 148,195     $ 176,994     $ 230,981  

Intersegment revenue

                       

Mexico

  $ (13 )   $ (530

)

  $ (488

)

US

    (255 )     (442

)

    (286

)

China

    (8,696 )     (8,154

)

    (9,591

)

Total

  $ (8,964 )   $ (9,126

)

  $ (10,365

)

Net external revenue

                       

Mexico

  $ 99,564     $ 102,016     $ 142,250  

US

    21,014       21,261       32,802  

China

    18,653       44,591       45,564  

Total segment revenue (which also equals consolidated revenue)

  $ 139,231     $ 167,868     $ 220,616  
                         

Site Contribution

                       

Mexico

  $ 7,515     $ 8,380     $ 9,784  

US

    (1,794 )     (1,327

)

    913  

China

    (1,115 )     4,196       3,099  

Total

  $ 4,606     $ 11,249     $ 13,796  
                         
                         
                         

Corporate expenses

    10,174       11,061       12,560  

Unrealized foreign exchange gain on unsettled forward exchange contracts

    (918 )     (831

)

    (616

)

Restructuring charges

    1,732       176        

Interest expense

    903       788       1,183  

Earnings (loss) before income taxes

  $ (7,285 )   $ 55     $ 669  

 

F-30

 

 

Capital expenditures:

 

The following table contains additions including those acquired through capital leases, to property, plant and equipment for 2017, 2016 and 2015:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

Mexico

  $ 480     $ 771     $ 735  

U.S.

    499       550       857  

China

    145       694       1,048  

Segment total

    1,124       2,015       2,640  

Corporate and other

    123       185       188  

Total

  $ 1,247     $ 2,200     $ 2,828  

 

Segment assets:

 

   

December 31,

2017

   

January 1,

2017

 

Property, plant and equipment (a)

               

Mexico

  $ 7,518     $ 8,858  

U.S.

    1,188       2,314  

China

    1,380       3,046  

Segment total

    10,086       14,218  

Corporate and other

    183       219  

Total

  $ 10,269     $ 14,437  
                 

Total segment assets

               

Mexico

  $ 47,835     $ 42,275  

U.S.

    12,748       9,482  

China

    8,011       15,489  

Segment total

    68,594       67,246  

Corporate and other

    1,262       1,758  

Total

  $ 69,856     $ 69,004  

  

 


(a)

Property, plant and equipment information is based on the principal location of the asset.

 

F-31

 

 

Geographic revenues:

 

The following table contains geographic revenues based on our customer invoicing location:

 

   

Year ended

December 31,

2017

   

Year ended

January 1,

2017

   

Year ended

January 3,

2016

 

U.S.

  $ 108,783     $ 114,850     $ 167,229  

Canada

    19,986       37,845       31,275  

Europe

          1,833       4,481  

China

    4,961       6,832       3,336  

Africa

    5,501       6,508       14,295  

Total

  $ 139,231     $ 167,868     $ 220,616  

 

Significant customers and concentration of credit risk

 

Sales of the Company’s products are concentrated among specific customers in the same industry. The Company requires collateral only from new customers with insufficient credit until such time as credit insurance can be obtained. The Company is subject to concentrations of credit risk in trade receivables and mitigates this risk through ongoing credit evaluation of customers and maintaining credit insurance. The Company considers concentrations of credit risk in establishing the allowance for doubtful accounts and believes the recorded allowances are adequate.

 

The Company expects to continue to depend upon a relatively small number of customers for a significant percentage of its revenue. In addition to having a limited number of customers, the Company manufactures a limited number of products for each customer. If the Company loses any of its largest customers or any product line manufactured for one of its largest customers, it could experience a significant reduction in revenue. Also, the insolvency of one or more of its largest customers or the inability of one or more of its largest customers to pay for its orders could decrease future revenue. As many costs and operating expenses are relatively fixed, a reduction in net revenue can decrease profit margins and adversely affect business, financial condition and results of operations.

 

During the period ended December 31, 2017, two customers each comprised 12% of revenue from across all geographic segments. At December 31, 2017, three customers comprised 40% (14%, 14% and 12%, respectively) of the Company’s trade accounts receivable. No other customers individually represented more than 10% of trade accounts receivable.

 

During the period ended January 1, 2017, two customers comprised 16% and 12%, respectively of revenue from across all geographic segments. At January 1, 2017, one customer represented 12% of the Company’s trade accounts receivable. No other customers individually represented more than 10% of trade accounts receivable.

 

During the period ended January 3, 2016, two customers individually comprised 13% and 11% of revenue from across all geographic segments. At January 3, 2016, one customer represented 17% of the Company’s trade accounts receivable. No other customers individually represented more than 10% of trade accounts receivable.

 

 

12.

Commitments and contingencies

 

Operating leases 

 

The Company leases office equipment, software and office space under various non-cancellable operating leases. Minimum future payments under non-cancellable operating lease agreements are as follows:

 

2018

  $ 2,051  

2019

    1,299  

2020

    864  

2021 and thereafter

    268  

Total

  $ 4,482  

 

F-32

 

 

The General Corporation Law of the State of Delaware allows a corporation to eliminate the personal liability of directors to the corporation or to any of its stockholders for monetary damages for a breach of his fiduciary duty as a director, except in the case where the director breached his duty of loyalty, failed to act in good faith, engaged in intentional misconduct or knowingly violated a law, authorized the payment of a dividend or approved a stock repurchase in violation of Delaware corporate law or obtained an improper personal benefit. The Company has entered into indemnification agreements with each director, which provide that the Company shall, subject to certain exceptions, indemnify and pay, advance or reimburse the costs of defense of such person who is made party to a proceeding by reason of their indemnified capacities. Each indemnified party agrees to repay any payment, advance or reimbursement of expenses made by the Company to such person if it is determined, following the final disposition of the claim, that the person is not entitled to indemnification by the Company with respect to a claim for which indemnification was obtained.

 

The nature of the indemnification prevents the Company from making a reasonable estimate of the maximum potential amount it could be required to pay to counterparties. The Company has purchased directors’ and officers’ liability insurance. No amount has been accrued in the consolidated balance sheet as at December 31, 2017 with respect to this indemnity.

 

Operating lease expense for the periods ended December 31, 2017, January 1, 2017 and January 3, 2016 was $2,412, $2,296 and $2,358, respectively. For period ended December 31, 2017, $1,519 was included in cost of sales, $893 was included in selling general and administrative expenses. For period ended January 1, 2017, $1,558 was included in cost of sales, $738 was included in selling general and administrative expenses. For period ended January 3, 2016, $1,502 was included in cost of sales, $856 was included in selling general and administrative expenses.

 

Certain of the Company’s facility leases include renewal options and normal escalation clauses. Renewal options are included in the lease term if reasonably assured. Escalation clauses are accounted for on a straight-line basis over the lease term.

 

Purchase Obligations

 

Purchase obligations not recorded on the balance sheet as at December 31, 2017 consist of insurance installments of $169 to be paid during 2018 ( January 1, 2017 - $187) ( January 3, 2016 - $218).

 

Purchase obligations not recorded on the balance sheet as at December 31, 2017 consist of open non-cancellable purchase orders for raw materials for $14,391 to be paid during calendar year 2018 ( January 1, 2017 - $13,602) ( January 3, 2016 - $13,215).

 

Contingencies

 

In the normal course of business, the Company may be subject to litigation and claims from customers, suppliers and former employees. Management believes that adequate provisions have been recorded in the accounts, where required. Although it is not possible to estimate the extent of potential costs, if any, management believes that the ultimate resolution of such contingencies would not have a material adverse effect on the financial position, results of operations and cash flows of the Company.

 

F-33

 

 

 

13.

Defined contribution pension plan and post-employment benefit plan

 

The Company has a 401K plan which is accounted for as a defined contribution plan for certain U.S. employees, whereby the Company matches a portion of employee contributions. Company contributions to the 401K plan were $125, $162 and $157 for the years ended December 31, 2017, January 1, 2017 and January 3, 2016, respectively.  

  

The Company has certain post-employment benefits related to employees in its Mexico facility. These benefit plans are only available to local employees and are generally government mandated. The liability related to the unfunded benefit obligations was $283 and $247 as at December 31, 2017 and January 1, 2017 respectively, which was classified within accrued liabilities in the consolidated balance sheet.

 

 

14.

Restructuring Charges

 

     During the year ended December 31, 2017, in accordance with the Restructuring Plan communicated on May 15, 2017, restructuring charges of $1,732 were incurred related to 49 full-time equivalents (“FTEs”) in Mexico, 102 FTEs in China, 22 FTEs in the U.S., and 10 FTEs in Canada. Additional charges were incurred related to the closure of the Suzhou facility, including ongoing administrative staff charges to close the facility. The closure of the Suzhou Facility was initiated in the second quarter of 2017 and was substantially completed by the end of 2017. During the first quarter of 2016, one employee was terminated in the Markham, Ontario facility, which resulted in severance charges of $176 based on the termination payments that are being paid on a monthly until the first quarter of 2017. No restructuring charges were incurred in 2015.

     

 

 

15.

Related Party Transactions

 

       The Company incurred Director fees of $220, $220 and $246 for the years ended December 31, 2017, January 1, 2017and January 3, 2016, respectively. The Company incurred stock based compensation expense related to stock based awards for Directors of $110, $85 and $52 for the years ended December 31, 2017, January 1, 2017 and January 3, 2016, respectively. These charges were included in selling, general and administrative expenses.

 

 

F-34