lmat20181231_10k.htm
 

 

 

Table of Contents



UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549


FORM 10-K


(Mark One)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
  For the fiscal year ended December 31, 2018
or
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
  For the transition period from              to             .

Commission File Number 001-33092


LEMAITRE VASCULAR, INC.

(Exact name of registrant as specified in its charter)


 

Delaware

04-2825458

(State or other jurisdiction of incorporation or organization)

(I.R.S. Employer Identification No.)

   

63 Second Avenue, Burlington, Massachusetts

01803

(Address of principal executive offices)

(Zip Code)

Registrant’s telephone number, including area code 781-221-2266


Securities registered under Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common Stock, $0.01 par value per share

 

Nasdaq Global Market

Securities registered under Section 12(g) of the Act: None


 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes:  ☐    No:  ☑

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes:  ☐    No:  ☑

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes:  ☑    No:  ☐

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months
(or for such shorter period that the registrant was required to submit such files).    Yes  ☑    No  ☐

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.   ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule12b-2 of the Exchange Act.

 

Large accelerated filer  ☐            Accelerated filer    ☑            Non-accelerated filer  ☐

 

Smaller reporting company  ☐            Emerging growth company  ☐

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.   ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule12b-2 of the Act).    Yes:  ☐    No:  ☑

 

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant, based on the last sale price for such stock on June 30, 2018 was: $372,895,620. For purposes of this calculation, shares held by stockholders whose ownership exceeded 5% of the registrant’s common stock outstanding were deemed to be held by affiliates. Exclusion of such shares should not be construed to indicate that any such person possesses the power, direct or indirect, to direct or cause the direction of the management or policies of the registrant or that such person is controlled by or under common control with the registrant.

 

At March 1, 2019, the registrant had 19,646,943 shares of common stock, par value $0.01 per share, outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Part III of this Form 10-K incorporates information by reference from the registrant’s definitive proxy statement to be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year covered by this annual report.



 

 

 

 

 

LEMAITRE VASCULAR

 

2018 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

 

PART I

 

Item 1.

Business

1

Item 1A.

Risk Factors

14

Item 1B.

Unresolved Staff Comments

28

Item 2.

Properties

28

Item 3.

Legal Proceedings

29

Item 4.

Mine Safety Disclosures

29

PART II

 

 

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

30

Item 6.

Selected Financial Data

32

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

33

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

47

Item 8.

Financial Statements and Supplementary Data

48

Item 9.

Changes In and Disagreements With Accountants on Accounting and Financial Disclosure

48

Item 9A.

Controls and Procedures

49

Item 9B.

Other Information

50

PART III

 

 

Item 10.

Directors, Executive Officers and Corporate Governance

51

Item 11.

Executive Compensation

51

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

51

Item 13.

Certain Relationships and Related Transactions, and Director Independence

51

Item 14.

Principal Accounting Fees and Services

52

PART IV

 

 

Item 15.

Exhibits and Financial Statements Schedules

52

Item 16.

Form 10-K Summary

55

SIGNATURES

56

 

 

 

 

 

PART I

 

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements (within the meaning of the federal securities law) that involve substantial risks and uncertainties, particularly risks related to the regulatory environment, our intellectual property, our common stock and risks related to our business and industry generally, such as risks inherent in the process of developing and commercializing products and services that are safe and effective for use in the peripheral vascular disease market. All statements, other than statements of historical facts, included in this Annual Report on Form 10-K regarding our strategy, future operations, future financial position, future net sales, gross margin expectations, projected costs, projected expenses, prospects and plans and objectives of management are forward-looking statements. The words “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would,” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We have based these forward-looking statements on our current expectations and projections about future events. Although we believe that the expectations underlying any of our forward-looking statements are reasonable, these expectations may prove to be incorrect, and all of these statements are subject to risks and uncertainties. Should one or more of these risks and uncertainties materialize, or should underlying assumptions, projections, or expectations prove incorrect, our actual results, performance, or financial condition may vary materially and adversely from those anticipated, estimated, or expected. No forward-looking statement can be guaranteed and actual results may vary materially from those projected in the forward-looking statements. We intend to take advantage of the Safe Harbor provisions of the Private Securities Litigation Reform Act of 1995 regarding our forward-looking statements, and are including this sentence for the express purpose of enabling us to use the protections of the safe harbor with respect to all forward-looking statements. We have included important factors in the cautionary statements included in this Annual Report on Form 10-K, particularly in the section entitled “Risk Factors,” that we believe could cause actual results or events to differ materially from the forward-looking statements that we make. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures, investments or terminations of distribution arrangements that we may make. These statements, like all statements in this report, speak only as of the date of this Annual Report on Form 10-K (unless another date is indicated), and we undertake no obligation to update or revise these statements in light of future developments. We do not assume any obligation to update any forward-looking statements, whether as a result of new information, future events, or otherwise, except as required by law.

 

The following discussion should be read in conjunction with our financial statements and the related notes contained elsewhere in this Annual Report on Form 10-K and in our other Securities and Exchange Commission filings.

 

Unless the context requires otherwise, references to “LeMaitre Vascular,” “LeMaitre,” “we,” “our,” and “us” in this Annual Report on Form 10-K refer to LeMaitre Vascular, Inc. and its subsidiaries.

 

LeMaitre, AlboGraft, AnastoClip, AnastoClip GC, Cardial, Dialine, EndoRE, LeMaitre Valvulotome, Eze-Sit, Glow ‘N Tell, Inahara-Pruitt, InvisiGrip, LeverEdge, LifeSpan, MollRing Cutter, MultiTASC, Omniflow, ProcCol, Pruitt, Pruitt F3, Pruitt-Inahara, Python, Reddick, RestoreFlow, Syntel, VascuTape, TRIVEX, Wovex, XenoSure, and the LeMaitre Vascular logo are registered trademarks of LeMaitre Vascular or one of its subsidiaries, and AlboSure, Chevalier, Flexcel, Periscope and VCS are unregistered trademarks of LeMaitre Vascular. This Annual Report on Form 10-K also includes the registered and unregistered trademarks of other persons, which are the property of their respective owners.

 

Item 1.

Business

 

Overview

 

LeMaitre Vascular is a global provider of medical devices and human tissue cryopreservation services for the treatment of peripheral vascular disease. We develop, manufacture, and market vascular devices to address the needs of vascular surgeons. Our diversified portfolio of peripheral vascular devices consists of brand name products that are used in arteries and veins outside of the heart and are well known to vascular surgeons, and includes the LeMaitre valvulotome, the XenoSure biologic patch, the Pruitt F3 carotid shunt, VascuTape radiopaque tape, and Syntel, Python and Latis embolectomy catheters. Our principal product offerings are sold throughout the world, primarily in the United States, Europe and, to a lesser extent, Asia and the Pacific Rim. We estimate that the annual worldwide market that our core product lines address is approximately $900 million.

 

We sell our products and services primarily through a direct sales force. As of December 31, 2018 our sales force was comprised of 108 sales representatives in North America, Europe, Japan, China and Australia, including one export manager. We also sell our products in other geographies through distributors. Our worldwide headquarters is located in Burlington, Massachusetts. Our European operations are headquartered in Sulzbach, Germany, and our Asia/Pacific Rim operations are headquartered in Singapore. We also have sales offices located in Fox River Grove, Illinois, Tokyo, Japan; Vaughan, Canada; Madrid, Spain; Milan, Italy; Saint-Etienne, France, Shanghai, China; and North Melbourne, Australia. In 2018, approximately 95% of our net sales were generated in territories in which we employ direct sales representatives.

 

1

 

The Peripheral Vascular Disease Market

 

Based on industry statistics, we estimate that peripheral vascular disease affects more than 200 million people worldwide and that the annual worldwide market for all peripheral vascular devices exceeds $5 billion. The disease encompasses a number of conditions in which the arteries or veins that carry blood to or from the legs, arms, or organs other than the heart become narrowed, obstructed, weakened, or otherwise compromised. In many cases peripheral vascular disease goes undetected, sometimes leading to life-threatening events including stroke, ruptured aneurysm, pulmonary embolism or death. We believe that the peripheral vascular disease market will grow due to the increase in the incidence and diagnosis rates of peripheral vascular disease, a shift by doctors to using higher-priced endovascular devices, and the adoption of western healthcare standards by the developing world. Clinical studies have identified several factors that increase the risk of peripheral vascular disease, including smoking, diabetes, obesity, high blood pressure, lack of exercise, coronary artery disease, high cholesterol, and being over the age of 65. Demographic trends suggest an increase in the prevalence of peripheral vascular disease over time, driven primarily by rising levels of obesity and diabetes and an aging population. We believe that our strong brands, established sales force, evolving suite of peripheral vascular device offerings, and broad network of vascular surgeon customers position us to capture an increasing share of this large and growing market.

 

Vascular surgeons treat peripheral vascular disease and also perform vascular procedures associated with other diseases, such as end-stage renal disease. We estimate that there are more than 15,000 vascular surgeons worldwide, including 2,800 board-certified vascular surgeons and several thousand general surgeons who perform vascular procedures in the United States, as well as more than 3,000 vascular surgeons in Europe, Asia and the Pacific Rim. In contrast to other medical specialists, such as interventional cardiologists and interventional radiologists, vascular surgeons perform both open vascular surgeries and endovascular procedures. Open vascular surgery involves opening the body, cutting vessels, and suturing. Endovascular procedures typically are minimally invasive, catheter-based procedures involving repairing vessels from within using real-time imaging. We estimate that in 2018, 91% of our net sales were from devices used in open vascular procedures.

 

Our Business Strategies

 

We have grown our business by using a three-pronged strategy: focusing on the vascular surgeon call point, competing for sales in low rivalry niche markets, and expanding our growth platform through our worldwide direct sales force as well as acquiring and developing complementary vascular devices.

 

Focused call point. We have historically directed our product offering and selling efforts towards the vascular surgeon, and estimate that in 2018 approximately 78% of our sales were to hospitals for use by vascular surgeons. As vascular surgeons are typically positioned to perform both open vascular surgeries and endovascular procedures, we sell devices in both the open and endovascular markets to the same end user.

   
Low rivalry niche segments. We seek to build and maintain leading positions in niche product and services segments. We believe that the relative lack of competitive focus on these segments by larger competitors, as well as the differentiated features and consistent quality of our products, enable higher selling prices and market share gains. In recent years we have also sought to sell complementary offerings into larger, more competitive market segments, particularly when we believe that our offerings in those segments are differentiated, such as the Omniflow II biosynthetic graft or the RestoreFlow human tissue cryopreservation services
   
Direct sales force expansion, and the addition of complementary products through acquisitions and research and development. We sell our products primarily through a direct sales force in North America, Europe, Asia and the Pacific Rim. Since 1998, we have built our sales force from zero to 108 direct sales representatives, including one export manager. We believe that direct-to-hospital sales build closer customer relationships, allow for higher selling prices and gross margins, and are not subject to the risk of customer loss related to distributor turnover. In countries where we do not have a direct sales force, we sell our products through distributors. For the year ended December 31, 2018, approximately 95% of our net sales were generated through our direct-to-hospital sales force, and no single hospital customer accounted for more than 2% of our net sales. We intend to further expand and diversify our product offerings and add new technology platforms. We believe our experience in acquiring and integrating product lines and businesses is one of our competitive advantages. We evaluate the acquisition of additional product lines and businesses that may be complementary to our product offerings, refine our current product lines, develop new applications for our existing technologies, and obtain regulatory approvals for our devices in new segments and geographies in order to further access the broader peripheral vascular device market.

 

2

 

Acquisition History

 

We were founded in 1983 by George D. LeMaitre, M.D., a vascular surgeon who designed and developed the predecessor to our LeMaitre Valvulotome. Through a combination of strategic acquisitions and research and development efforts, we have expanded to 16 product lines. We have completed 21 acquisitions of complementary products since 1998:

 

Year

 

Acquisition

 

Key Product(s) and Services

1998

 

Whittaker Screen Printing

 

Radiopaque tape manufacturing operations

1999

 

Vermed

 

Embolectomy catheters

2001

 

Ideas for Medicine

 

Carotid shunts, balloon catheters, and laparoscopic cholecystectomy devices

2003

 

Credent

 

Polycarbonate grafts

2004

 

VCS Clip

 

Closure system

2005

 

Endomed

 

Stent grafts

2007

 

Vascular Innovations

 

Contrast injector

2007

 

Vascular Architects

 

Remote endarterectomy devices

2007

 

UnBalloon Technology

 

Stent graft modeling catheters

2007

 

Biomateriali

 

Polyester grafts and patches

2010

 

LifeSpan

 

ePTFE grafts

2012

 

XenoSure

 

Biologic patches

2013

 

Clinical Instruments

 

Carotid shunts and embolectomy catheters

2013

 

TRIVEX

 

Powered phlebectomy system

2014

 

Xenotis Pty Ltd

 

Biosynthetic grafts

2014

 

Angioscope

 

Fiberoptic catheters

2015

 

Eze-Sit

 

Valvulotomes

2016

 

ProCol

 

Biologic graft

2016

 

RestoreFlow

 

Human tissue cryopreservation services

2018

 

Syntel/Python 

 

Embolectomy catheters

2018

 

Cardial

 

Polyester grafts, valvulotomes, surgical glue

 

 

With the exception of the 2018 acquisitions as well as remote endarterectomy devices, powered phlebectomy systems, cryopreserved allograft services and biosynthetic grafts, we have relocated the manufacturing operations associated with our 21 acquisitions to our Burlington, Massachusetts headquarters and we continue to look at ways to make our operations more efficient. The manufacture of our biosynthetic vascular grafts take place in our North Melbourne, Australia facility and the human tissue processing and cryopreservation operations associated with RestoreFlow allografts take place in our Fox River Grove, Illinois facility. The manufacture of our Cardial devices takes place in our Saint-Etienne, France facility, and we currently purchase our Syntel, Pythin and Latis catheters from Applied Medical.

 

3

 

 

Our Products and Services

 

We have a portfolio of 16 product lines, all of which are designed to treat vascular disease, and most of which are designed for use in open vascular surgery. We also provide services related to the processing and cryopreservation of human vascular tissue. Our products and services address various anatomical areas including the carotid arteries, lower extremities, upper extremities, aorta and other areas. In 2018, the lower extremities product lines and services were 51% of revenues, the carotid artery product lines comprised 34% of revenues, and other areas combined were 15%. In 2017, the lower extremities product lines and services were 51% of revenues, the carotid artery product lines comprised 32% of revenues, and other areas combined were 17%. In 2016, the lower extremities product lines and services were 51% of revenues, the carotid artery product lines comprised 31% of revenues, and other areas combined were 18%. No single product line accounted for more than 25% of our revenues in 2018, 2017 or 2016.

 

Of our 16 product offerings, four are biologic devices that are implanted in the patient, and one is the service of processing and cryopreserving human tissue for implantation into the patient. These include the XenoSure patch (bovine pericardium), ProCol graft (bovine mesenteric vein), Omniflow II biosynthetic graft (ovine tissue and synthetic mesh), surgical glue (porcine gelatin) and the RestoreFlow Allograft cryopreserved graft (human tissue). As a percentage of sales, these biologic product lines represented 36% in 2018, 34% in 2017, and 27% in 2016.

 

Angioscopes

 

The LeMaitre Disposable Angioscope is a fiberoptic catheter used for viewing the lumen of a blood vessel. It also provides direct visualization of valves during in-situ bypass procedures.

 

Balloon Catheters for Embolectomy, Thrombectomy, Occlusion and Perfusion

 

Our LeMaitre, NovaSil, Syntel, Python and Latis lines of embolectomy catheters are used to remove blood clots from arteries or veins. We sell single-lumen latex and latex-free embolectomy catheters as well as dual-lumen latex and latex-free embolectomy catheters. The dual-lumen embolectomy catheters enable clot removal and simultaneous irrigation or guide-wire trackability. Our Syntel thrombectomy catheter features a silicone balloon and is designed for removing thrombi in the venous system. Occlusion catheters temporarily occlude blood flow to allow the vascular surgeon time and space to complete a given procedure. Perfusion catheters temporarily perfuse blood and other fluids into the vasculature. Our Pruitt line of occlusion and perfusion catheters reduces vessel trauma by using internal balloon fixation rather than traditional external clamp fixation.

 

Carotid Shunts

 

Our Pruitt F3, Pruitt F3-S, Pruitt-Inahara and Flexcel carotid shunts are used to temporarily shunt blood to the brain while the surgeon removes plaque from the carotid artery in a carotid endarterectomy surgery. Our Pruitt F3, Pruitt F3-S and Pruitt-Inahara shunts feature internal balloon fixation that eliminates the need for clamps, thereby reducing vessel trauma. Our Flexcel shunt is a non-balloon shunt offered for surgeons who prefer to secure their shunt with externally placed clamps.

 

Powered Phlebectomy Device

 

Our TRIVEX powered phlebectomy system is comprised of capital equipment and disposables that enable removal of varicose veins. In this procedure, an illuminator is inserted through a small incision in the leg, enabling visualization of varicose veins. A second instrument removes the veins. Compared to conventional hook phlebectomy, this surgical procedure is faster and results in more complete vein removal through fewer incisions.

 

Radiopaque Tape

 

Our VascuTape Radiopaque Tape is a flexible, medical-grade tape with centimeter or millimeter markings printed with our proprietary radiopaque ink that is visible both to the eye and to an x-ray machine or fluoroscope. VascuTape Radiopaque Tape is applied externally to the skin and provides interventionalists with a simple way to cross-reference between the inside and the outside of a patient’s body, allowing them to locate tributaries or lesions beneath the skin.

 

 

Remote Endarterectomy Devices

 

Our EndoRE line of remote endarterectomy devices are used to remove plaque from arteries in the leg in a minimally invasive procedure requiring a single incision in the groin. Our EndoRE devices are used to separate the plaque from the vessel, cut the far end of the plaque to free it for removal, and then withdraw it from the vessel.

 

Valvulotomes

 

Our LeMaitre valvulotomes, Over-The-Wire LeMaitre valvulotomes, Eze-Sit valvulotomes, Chevalier valvulotomes and LeMills valvulotomes cut valves primarily in the saphenous vein, a vein that runs from the foot to the groin, so the vein can function as an artery to carry blood past diseased arteries to the lower leg or the foot. We believe our valvulotomes reduce costs for hospitals by enabling bypass surgery to be performed with several small incisions rather than one continuous ankle-to-groin incision, thereby reducing the length of hospital stays and the likelihood of wound complications.

 

4

 

Vascular Grafts

 

Our AlboGraft, Wovex and Dialine II vascular grafts are collagen-impregnated polyester grafts used to bypass or replace diseased arteries. They are available in both straight tube and bifurcated versions.

 

Our LifeSpan ePTFE vascular graft is an expanded polytetrafluoroethylene (ePTFE) graft used to bypass or replace diseased arteries and to create dialysis access sites. LifeSpan is available in both regular and thin wall options and with an optional full or partial external spiral support. Our stepped and tapered LifeSpan models are designed to reduce the risk of steal syndrome and high cardiac output, complications that may arise in dialysis access grafts.

 

Our Omniflow II biosynthetic vascular graft is a composite of cross-linked ovine collagen with a polyester mesh endoskeleton. It is used to bypass or replace diseased leg arteries and to create dialysis access sites.

 

Our ProCol biologic graft is a bovine mesenteric vein vascular graft used for dialysis access in patients with a previously failed synthetic graft.

 

Through our RestoreFlow allograft business, we provide human tissue cryopreservation services, in particular the processing and cryopreservation of veins and arteries. Our RestoreFlow allografts are cryopreserved human tissue grafts, including saphenous veins, femoral veins and arteries, and aortoiliac arteries. These allografts are used in a variety of vascular reconstructions such as peripheral bypass, hemodialysis access, and aortic infections. Currently they are only available for distribution in the United States and Canada.

 

Vascular Patches

 

Our XenoSure biologic vascular patch is made from bovine pericardium, and is used primarily for closure of vessels after surgical intervention. Our AlboSure Vascular Patch is a polyester patch used primarily for vessel closure after surgical intervention.

 

Closure Systems

 

Our AnastoClip AC and AnastoClip GC closure systems attach vessels to one another with titanium clips instead of sutures. These closure systems create an interrupted anastomosis that expands and contracts as the vessel pulses, which surgeons believe improves the durability of the anastomosis. The AnastoClip AC and AnastoClip GC closure systems also facilitate compliant dura closure in neuro applications. 

 

Surgical Glue

Our Cardial surgical glue is a biologic-based glue that is typically used for joining dissected vessel layers and reinforcing sutures in cardiac and vascular procedures.

 

Sales and Marketing

 

As of December 31, 2018, we employed 108 field sales representatives, including one export manager. We believe the expansion of our sales force since 1998 has been a key factor in our success, and it remains one of our primary long-term strategies. Over 95% of net sales were generated in territories in which we employ direct sales representatives.

 

Outside our direct markets, we generally sell our products through country-specific distributors.

 

In addition, we engage in direct marketing efforts, including direct mail and exhibitions at medical congresses, which we believe are important to our brand development. We believe that direct marketing allows us to market to vascular surgeons who are beyond the reach of our direct sales force.

 

We also provide training to our vascular surgeon customers on specific vascular surgery procedures including in situ or peripheral bypass, carotid endarterectomy, phlebectomy and interrupted anastomosis.

 

Research and Development

 

Our research and development has historically focused on developing enhancements and extensions to our existing product lines. Our current product development efforts are primarily focused on the open vascular space. In 2018, our efforts were primarily focused on expanding and enhancing our biologic product lines including XenoSure and Omniflow II, and completing the integration of our ProCol manufacturing into our Burlington facility. With regard to XenoSure, our priorities included attaining an additional indication for use in neurosurgery in 2019, as well as quality-based improvements and research around potential future generations of the product.  Efforts were also made in 2018 to complete improvements on the design of the LeMaitre valvulotome as well as our powered phlebectomy system. 

 

5

 

All of our products are subject to our design control procedures throughout the various stages of product development. These procedures may include bench testing, animal testing, human cadaveric studies and human clinical trials conducted by independent physicians, and post-market surveillance of product performance, as appropriate. We may use feedback received from independent physicians to demonstrate product functionality before commencing full-scale marketing of any product.

 

Manufacturing and Processing

 

Our primary manufacturing facilities are located in Burlington, Massachusetts, where most of our product lines are produced. We also have facilities in North Melbourne, Australia, where our Omniflow II product line is produced, Saint-Etienne, France where our Wovex and Dialine grafts, Chevalier valvulotomes and surgical glue are produced, and Fox River Grove, Illinois where RestoreFlow allografts are processed, cryopreserved, stored and distributed.

 

We typically integrate manufacturing of the newly acquired lines into our Burlington operations. Our TRIVEX, EndoRE and some of our embolectomy catheters, however, are currently manufactured by third parties. We completed a renovation of our manufacturing facility in Burlington in 2017 and in 2018 moved our ProCol biologic product line into the space. In 2018 and into 2019 we are continuing to expand this biologic clean room.

 

We manufacture certain proprietary components, assemble most of our devices ourselves, and inspect, test, and package all of our finished products. By designing and manufacturing many of our products from raw materials, and assembling and testing as many of our subassemblies and products as practical, we believe we can maintain better quality control, ensure compliance with applicable regulatory standards and internal specifications, limit outside access to our proprietary technology, ensure adequate product supply, and make design modifications in a timely manner. We have custom-designed proprietary manufacturing and processing equipment and have developed proprietary enhancements for existing production machinery. Our products are built to stock.

 

We process and cryopreserve human tissue provided to us by qualified tissue procurement organizations in the United States. Donated human tissue is procured from deceased donors by these organizations. We have strict specifications regarding tissue we will accept for processing relating to, among other things, the physical condition and characteristics of the tissue and the donor, the medical history of the donor and certain test results of the donated tissue. We also use various supplies in connection with the processing and cryopreservation of human tissue, including certain proprietary solutions and antibiotics.

 

Our management information systems provide us with the ability to evaluate our performance, collect business intelligence, and make better strategic decisions. These systems include customer relationship management, order entry, invoicing, on-line inventory management, lot traceability, purchasing, shop floor control, and shipping and distribution analysis, as well as various accounting-oriented functions. During day-to-day operations, these systems enable us to track our products from the inception of an order through the manufacturing process and then ultimately through delivery of the product to the customer.

 

We purchase components from, and have certain product lines manufactured by, third parties. Most of our components are readily available from several supply sources, but we do rely on single- and limited-source suppliers for several of our key product components and our third-party-manufactured products. We do not have contractual arrangements with many of these suppliers and manufacturers, and we order our supplies and product on an as-needed basis. To date, we have not experienced any significant supply disruptions from existing sources of product and components, but there is no guarantee that we will not experience such disruptions in the future.

 

 

Our Burlington, North Melbourne and Saint-Etienne manufacturing facilities have been certified to ISO 13485 quality management system standards, which enables us to satisfy certain regulatory requirements of the EU, Canada, and other foreign jurisdictions. Our Fox River Grove, Illinois facility has been accredited by the American Association of Tissue Banks for the processing, storage and distribution of cardiac and vascular tissue for transplantation and licensed by certain state agencies. Our manufacturing and processing facilities are subject to periodic inspections by various regulatory authorities and Notified Bodies (described below) to ensure compliance with domestic and non-U.S. regulatory requirements. See “Government Regulation” for further information. In August 2017, our Burlington facilities were audited by the U.S. Food and Drug Administration (FDA), and in January 2018, we underwent inspections by our European Notified Body, LRQA. In February 2018, our Fox River Grove facility was inspected by the FDA, and our Australian operations were inspected by our notified body, TUV Rheinland. In February 2019, our Burlington facilities were audited by the Korean Ministry of Food and Drug Safety. The results of these inspections were satisfactory.

 

6

 

Competition

 

The segments in which our product lines compete are characterized by rapid change resulting from technological advances and scientific discoveries. No one company competes against all of our product lines; rather, we compete with a range of companies. Notable larger competitors include Baxter International, Inc., Boston Scientific Corporation, Cardiovascular Systems, Inc., Medtronic, Becton, Dickinson and Company, CryoLife, Inc., Edwards Lifesciences Corporation, Getinge AB, LifeNet Health, Inc., Terumo Medical Corporation, and W. L. Gore & Associates.

 

The success of our products relies on effective service support as well as superior product technology, quality, product and service availability, reliability, ease of use, cost-effectiveness, physician familiarity, and brand recognition. While we also compete on the basis of price, our products that are more technologically advanced than those of our competitors are sometimes sold at higher prices than those of our competitors. We believe that our continued success will depend on our ability to broaden and optimize our direct sales channel, acquire or develop additional complementary vascular device products, obtain regulatory and reimbursement approvals, maintain sufficient inventory, and retain skilled personnel. We also compete on the basis of procedure type. The treatment of peripheral vascular disease has experienced a shift from open vascular surgery towards minimally invasive endovascular procedures, and many of our products are used primarily or exclusively in open vascular surgery. Our ability to compete effectively relies on keeping pace with existing or new product and technology offerings in the vascular device market, and the minimally invasive endovascular procedure segment in particular.

 

Many of our competitors have substantially greater financial, technological, research and development, regulatory, marketing, sales, and personnel resources than we do. Certain of these competitors are able to manufacture at lower costs and may therefore offer comparable products at lower prices, especially commodity products such as polyester and ePTFE vascular grafts. Certain of these competitors may also have greater experience in developing and further improving products, obtaining regulatory approvals, and manufacturing and marketing such products. In the case of vascular allografts, certain competitors may have an advantage in sourcing tissue due to higher volume purchases and longer term relationships with tissue procurement organizations. Additionally, certain of our competitors may obtain patent protection or regulatory approval or clearance, or achieve product commercialization before us, any of which could materially adversely affect our business.

 

Intellectual Property

 

We believe that our success is dependent, to a certain extent, on the development and maintenance of proprietary aspects of our technologies. We rely on a combination of patents, trademarks, trade secret laws, and confidentiality and invention assignment agreements to protect our intellectual property rights.

 

We maintain patents in the United States, Europe and other strategic locations relating to various aspects of our products and/or manufacturing processes. The majority of our issued U.S. patents are set to expire at various times from 2020 to 2032.

 

 

Generally, for products that we believe are appropriate for patent protection, we will attempt to obtain patents in the United States and key markets of the EU. However, depending on circumstances, we may not apply for patents in all or any of those jurisdictions.

 

Certain aspects of our products are covered by patents held by third parties. We manufacture, market, and sell these products pursuant to license agreements with these third parties. These arrangements require us to pay royalties, typically determined as a percentage of our net sales for the underlying product. If we fail to make these payments or otherwise fail to observe the terms of these agreements, we may lose our ability to sell these products. For example, we manufacture, market, and sell our LifeSpan vascular grafts, Periscope Dissectors and TRIVEX phlebectomy products pursuant to licenses with third-parties.

 

We believe that our brands have been an important factor in our success. We rely on common law and registered trademarks to protect our brands. Some of our registered trademarks are LeMaitre, XenoSure, Pruitt, VascuTape, Glow ‘N Tell and RestoreFlow, each of which is registered in the United States, the EU, or both, and in certain cases in other foreign countries.

 

We rely on trade secret protection for certain unpatented aspects of other proprietary technology. Most of our products are not protected by patents. Patent protection is not available where we acquire a commercialized product that is not patented, such as the embolectomy catheters we acquired from Applied Medical in September 2018 and the product lines we acquired from Becton, Dickinson in October 2018. In the past, other companies have independently developed or otherwise acquired comparable or substantially equivalent proprietary information and techniques, and there can be no assurance that others will not do so in the future or otherwise gain access to our proprietary technology or disclose such technology, or that we can meaningfully protect our trade secrets. We have a policy of requiring employees and consultants to execute confidentiality agreements upon the commencement of an employment or consulting relationship with us. Our confidentiality agreements also require our employees to assign to us all rights to any inventions made or conceived during their employment with us. We also generally require our consultants to assign to us any inventions made during the course of their engagement by us. There can be no assurance, however, that these agreements will provide meaningful protection or adequate remedies for us in the event of unauthorized use, transfer, or disclosure of confidential information or inventions.

 

7

 

The laws of foreign countries generally do not protect our proprietary rights to the same extent as do the laws of the United States and we may experience more difficulty enforcing our proprietary rights in certain foreign jurisdictions.

 

See “Item 1A. Risk Factors” for a description of certain risks associated with our intellectual property.

 

Government Regulation

 

Medical devices and human tissues are subject to regulation by the FDA, and, in some instances, other federal and state authorities and foreign governments.

 

United States Regulation of Medical Devices

 

Most of our products are medical devices subject to extensive regulation by the FDA under 21 United States Code Chapter 9, the Federal Food, Drug, and Cosmetic Act (the FDCA). FDA regulations govern, among other things, product development, testing, manufacturing, packaging, labeling, storage, clearance or approval, advertising and promotion, sales and distribution, and import and export.

 

Premarket Pathways

 

Most medical devices must receive either 510(k) clearance or Premarket Application approval (PMA approval) from the FDA prior to commercial distribution. Devices deemed to pose relatively less risk are placed in either class I or II, which requires the manufacturer to submit a premarket notification requesting permission for commercial distribution; this is known as 510(k) clearance. Some low-risk devices are exempted from this requirement. Class II devices may be subject to special controls, such as performance standards and FDA guidelines that are not applied to class I devices. Devices deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting, or implantable devices, or devices deemed not substantially equivalent to a previously 510(k)-cleared device or to a pre-amendment class III device (i.e., one in commercial distribution before May 28, 1976) for which PMA applications have not been called, are placed in class III, which generally requires PMA approval. In all cases, a user fee is required for 510(k) submissions and PMA applications, which in the case of PMA applications can be very costly.

 

510(k) Clearance. To obtain 510(k) clearance, a manufacturer must submit a premarket notification demonstrating that the proposed device is substantially equivalent in intended use and performance to a “predicate device” (i.e., a previously 510(k)-cleared class I or class II device or a pre-amendment class III device for which the FDA has not yet called for PMA applications). The FDA’s 510(k) clearance pathway usually takes from three to twelve months, but it can take longer. In reviewing a premarket notification, the FDA may request additional information, including clinical data. Nearly all of our devices currently sold in the United States are marketed pursuant to the 510(k) clearance, with the exception of our ProCol biologic vascular graft.

 

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change as specified by FDA guidelines, requires a new 510(k) clearance. The FDA requires each manufacturer to make this determination in the first instance, but the FDA can review any such decision. If the FDA disagrees with a manufacturer’s decision not to seek a new 510(k) clearance, the agency may retroactively require the manufacturer to seek 510(k) clearance. The FDA also can require the manufacturer to cease marketing and/or recall the modified device until 510(k) clearance or PMA approval is obtained. Also, the manufacturer may be subject to significant regulatory fines or penalties.

 

PMA Approval. The PMA approval pathway requires proof of the safety and effectiveness of the proposed device to the FDA’s satisfaction, making this pathway much more costly, lengthy, and uncertain. A PMA application must provide extensive preclinical and clinical trial data, as well as detailed information about the device and its components regarding, among other things, device design, manufacturing, and labeling. As part of the PMA review, the FDA will typically inspect the manufacturer’s facilities for compliance with the Quality System Regulation (QSR) which imposes elaborate testing, control, documentation, and other quality assurance procedures on the manufacturing process.

 

If the FDA approves a PMA, the approved indications or claims may be more limited than those originally sought. The PMA can include post-approval conditions that the FDA believes to be necessary to ensure the safety and effectiveness of the device including, among other things, restrictions on labeling, promotion, sale, and distribution. Failure to comply with the conditions of approval can result in material adverse enforcement action, including the loss or withdrawal of the approval. Even after approval of a PMA, a new PMA or PMA supplement is required if the device or its labeling or manufacturing process are modified. Supplements to a PMA often require the submission of the same type of information required for an original PMA, except that the supplement is generally limited to that information needed to support the proposed change from the product covered by the original PMA.

 

8

 

Clinical Trials. A clinical trial is typically required to support a PMA application and is sometimes required to support 510(k) clearance. In some cases, one or more smaller feasibility Investigational Device Exemption (IDE) studies may precede a pivotal IDE clinical trial intended to comprehensively demonstrate the safety and effectiveness of the investigational device. All clinical studies of investigational devices must be conducted in compliance with the FDA’s extensive requirements. If an investigational device could pose a significant risk to patients (as defined in the regulations), the FDA, prior to initiation of clinical use, must approve an IDE application showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. A non-significant risk device does not require submission to the FDA of an IDE application. Both significant risk and non-significant risk investigational devices require approval from institutional review boards (IRBs) at the study centers where the device will be used. The FDA and the IRB at each institution at which a clinical trial is being performed may suspend a clinical trial at any time for various reasons, including a belief that the subjects are being exposed to an unacceptable health risk. During a study, the sponsor must comply with the FDA’s IDE requirements for investigator selection, trial monitoring, reporting, record keeping, and prohibitions on the promotion of investigational devices. The investigators must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of investigational devices, and comply with all reporting and record-keeping requirements. Required records and reports are subject to inspection by the FDA. Prior to granting PMA approval, the FDA typically inspects the records relating to the conduct of the study and the clinical data supporting the PMA application for compliance with IDE requirements.

 

Although the QSR does not fully apply to investigational devices, the requirement for controls on design and development does apply. The sponsor also must manufacture the investigational device in conformity with the quality controls described in the IDE application and any conditions of IDE approval that FDA may impose with respect to manufacturing.

 

Historically, our products have been introduced into the market using the 510(k) clearance procedure, and we have not used the more burdensome PMA process for any of the products that we currently market or sell in the United States, other than our ProCol vascular graft, which had PMA approval at the time we acquired the device. If we were to seek Unites States approval for our Omniflow II biosynthetic vascular graft, for example, we would be required to follow the PMA process.

 

Postmarket Regulation

 

After a device is placed on the market, regardless of the classification or premarket pathway, significant regulatory requirements apply. These include:

 

 

manufacturing establishment registration and device listing with the FDA;

 

 

the QSR, which requires finished device manufacturers, including third-party or contract manufacturers, to follow stringent design, testing, control, documentation, and other quality assurance procedures in all aspects of manufacturing;

 

 

labeling regulations and FDA prohibitions against the promotion of products for uncleared, unapproved, or off-label uses and other requirements related to promotional activities;

 

 

medical device reporting regulations, which require that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction were to recur; and

 

 

corrections and removal reporting regulations, which require that manufacturers report to the FDA any field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health.

 

We are subject to inspection and marketing surveillance by the FDA to determine our compliance with regulatory requirements. The most recent FDA inspection of our Burlington facility was in August 2017, the result of which was satisfactory. Non-compliance with applicable FDA requirements can result in, among other things, public warning letters, fines, injunctions, civil penalties, recall or seizure of products, total or partial suspension of production, failure of the FDA to grant marketing approvals, withdrawal of marketing approvals, a recommendation by the FDA to disallow us to enter into government contracts, and criminal prosecutions. The FDA also has the authority to request repair, replacement, or refund of the cost of any device manufactured or distributed by us. In the event that one of our suppliers fails to maintain compliance with our quality requirements, we may have to qualify a new supplier and could experience manufacturing delays as a result.

 

Non-U.S. sales of medical devices manufactured in the United States that are not approved or cleared by the FDA for use in the United States, or are banned or deviate from lawful performance standards, are subject to FDA export requirements. Before exporting such products to a foreign country, we must first comply with the FDA’s regulatory procedures for exporting unapproved devices.

 

9

 

 

United States Regulation of Human Tissue

 

FDA

 

Our allografts are subject to extensive regulation by the FDA under Title 21 of the Code of Federal Regulations, Part 1271 (Human Cells, Tissues, and Cellular and Tissue-Based Products). These regulations were promulgated under Section 361 of the Public Health Service Act, which authorized the FDA to issue regulations to prevent the spread of communicable disease. Under these regulations, the FDA requires registration of establishments that process human cells, tissues, and cellular and tissue-based products and establishes donor-eligibility, current good tissue practice and other procedures to prevent the introduction, transmission, and spread of communicable diseases by such products, including through donor screening and testing. Our Fox River Grove, Illinois facility and our Burlington, Massachusetts facility are both registered with the FDA’s Center for Biologics Evaluation and Research as required by the regulations. The regulations also provide for the inspection of tissue establishments by the FDA. The FDA most recently inspected our Fox River Grove, Illinois facility in February 2018 and the results of that inspection were satisfactory. In the event of non-compliance with these regulations, the FDA may issue a warning letter, order the recall and/or destruction of tissues and/or order the suspension or cessation of processing and preservation of new tissues.

 

AATB

 

We voluntarily comply with the standards of the tissue bank industry’s accreditation organization, the American Association of Tissue Banks (the AATB). The AATB has established standards for tissue banking and administers an accreditation program. Compliance with the AATB’s standards are a predicate to accreditation, which must be renewed every three years. Our Fox River Grove, Illinois facility has been accredited by the AATB for the processing, storage and distribution of cardiac and vascular tissue for transplantation through May 13, 2021. Our Burlington, Massachusetts facility is also accredited for the storage and distribution of tissue. The AATB is entitled to inspect accredited members at any time. The AATB most recently inspected our Fox River Grove, Illinois facility in January 2018, and the results were satisfactory.

 

NOTA

 

Under the National Organ Transplant Act, it is unlawful for any person or entity to knowingly acquire, receive, or otherwise transfer any human organ for valuable consideration for use in human transplantation if the transfer affects interstate commerce. However, “valuable consideration” excludes the reasonable payments associated with the removal, transportation, implantation, processing, preservation, quality control, and storage of a human organ. We believe the compensation we receive for the processing and cryopreservation services we provide with respect to our allografts falls within this statutory exception.

 

State Regulation

 

Certain states regulate the processing, storage and distribution of human tissue. We are licensed or registered, as applicable, with California, Delaware, Florida, Illinois, Maryland, New York and Oregon. The regulatory agencies of these states may inspect our Fox River Grove, Illinois facility from time to time to monitor compliance with applicable state regulations.

 

Other U.S. Regulations

 

We, and our products and services, are also subject to a variety of state and local laws in those jurisdictions where our products and services are or will be marketed or distributed, and federal, state, and local laws relating to matters such as safe working conditions, manufacturing practices, environmental protection, fire hazard control, and disposal of hazardous or potentially hazardous substances. We are subject to various federal and state laws governing our relationships with the physicians and others who purchase or make referrals for our products. For instance, federal law prohibits payments of any form that are intended to induce a referral for any item payable under Medicare, Medicaid, or any other federal healthcare program. Many states have similar laws. There can be no assurance that we will not be required to incur significant costs to comply with such laws and regulations now or in the future or that such laws or regulations will not have a material adverse effect upon our ability to do business.

 

We are subject to federal, state, and local laws, rules, regulations, and policies governing the use, generation, manufacture, storage, air emission, effluent discharge, handling, and disposal of certain hazardous and potentially hazardous substances used in connection with our operations. Although we believe that we have complied with these laws and regulations in all material respects and to date have not been required to take any action to correct any noncompliance, there can be no assurance that we will not be required to incur significant costs to comply with environmental regulations in the future.

 

Non-U.S. Regulation of Medical Devices

 

Sales of medical devices are subject to regulatory requirements in many countries. The regulatory review process may vary greatly from country to country. The EU has adopted numerous directives and standards relating to medical devices regulating their design, manufacture, clinical trials, labeling, and adverse event reporting, including the Medical Devices Directive (93/42/EEC) (the Directive), which is applicable to our products. Devices that comply with the requirements of the Directive are entitled to bear a CE mark, indicating that the device conforms with the essential requirements of the applicable directive and can be commercially distributed in countries that are members of the EU, as well as Iceland, Lichtenstein, Norway, and Switzerland. Each member state of the EU has implemented the directives into its respective national law and has each established a “Competent Authority” to apply the directive in its territory.

 

10

 

The Directive defines a classification system placing devices into Class I, IIa, IIb, or III, depending on the risks and characteristics of the medical device. The Directive also defines the essential requirements that devices must meet before being placed on the market, establishes assessment procedures for approving a device for marketing, and creates mechanisms for national authorities to manage implementation or to intervene when public health requires. Essential requirements include manufacturing, design, performance, labeling, and safety requirements, and may include providing certain clinical data. These requirements vary based on the type of the device and other related factors.

 

A manufacturer of low-risk devices typically may demonstrate conformity to the essential requirements based on a self-declaration. The European Standardization Committees have adopted numerous harmonized standards for specific types of medical devices. Compliance with relevant standards establishes a presumption of conformity with the essential requirements. Manufacturers of higher-risk devices generally must use a “Notified Body”—an appointed independent third party to assess conformity. This third-party assessment may consist of an audit of the manufacturer’s quality system and specific testing of the manufacturer’s devices. An assessment by a Notified Body in one country within the EU is generally required in order for a manufacturer to commercially distribute the product throughout the EU. Most of our devices are considered higher-risk devices that require Notified Body assessment.

 

The European medical device laws also address the advertising and promotion of medical devices, clinical investigations, and requirements for handling adverse events. Post-market surveillance of medical devices in the EU is generally conducted on a country-by-country basis; however, the Directive sets forth certain specific requirements for reporting adverse events. The Medical Device Vigilance system is the mechanism by which adverse event reporting is managed and monitored in the EU.

 

In April 2017, the EU adopted new regulations for medical devices (MDR), which replace the Directive and apply after a three year transition period. Our products will be subject to the MDR, which require all of our products, regardless of classification, to obtain a new CE mark in accordance with the new, more stringent standards under the MDR. For example, as a condition to CE mark approval, clinical evidence from clinical investigations will be required for most Class III and implantable devices. As our Notified Bodies begin to transition from MDD to MDR, they have begun to impose more rigorous requirements on us in order to obtain approval to renew the CE marks on certain of our products. If we fail to obtain the CE marks on our products under the MDR in a timely manner, or at all, future sales of our products could be impacted.

 

The Notified Bodies that issue a majority of our CE marks are located in the United Kingdom. These United Kingdom Notified Bodies are accredited to issue CE marks by the United Kingdom’s health authority, MHRA. As of the date of this report, the United Kingdom (UK) is scheduled to exit the EU on March 29, 2019. There continues to be uncertainty regarding the economic and regulatory impact of the UK’s exit (referred to as “Brexit”). If the United Kingdom were to leave the EU without a signed withdrawal agreement on March 29, 2019, these CE marks would no longer be recognized by the EU countries, and there would be a lapse in our CE marking. As such, only product built and sold to our European subsidiary prior to March 29, 2019 would be eligible for sale to EU countries while we awaited reissuance of the CE marks by a properly accredited Notified Body. In such event, we would expect reinstatement of the CE marks by the second half of 2019 and until such time, we would expect to continue selling product from our inventory reserves already on the market in Europe prior to March 29, 2019. If our transference of CE marks is materially delayed, it is possible that our revenues could be impacted due to our saleable inventory reserves becoming depleted.

 

In the event that any of our products proves to be defective, we can voluntarily recall, or the FDA or foreign equivalent could require us to implement a recall of, any of our products and, if someone is harmed by a malfunction or a product defect, we may experience product liability claims for such defects. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital and may harm our reputation and financial results. Future recalls or claims could also result in significant costs to us and significant adverse publicity, which could harm our ability to market our products in the future.

 

In some cases, we rely on our non-U.S. distributors or third party agents to obtain premarket approvals, complete product registrations, comply with clinical trial requirements, and complete those steps that are customarily taken in the applicable jurisdictions to comply with governmental and quasi-governmental regulation. In the future, we expect to continue to rely on distributors and agents in this manner where appropriate.

 

Canada regulates the import and sale of medical devices through Health Canada (HC). HC classifies medical devices into four classifications, with Class I being the lowest risk and Class IV being the highest. Class I and II devices are often cleared for sale after they are CE marked or listed on the company’s ISO certification and filed via fax-back applications. Higher classification risk devices (Class III and IV) require filing dossiers that resemble US 510(k) applications. These applications can range in cost and typically take longer for approval. As a holder of Canadian device licenses, we are subject to inspection by HC at our Canadian office. Our Canadian office was most recently inspected in August 2017, the results of which were satisfactory.

 

11

 

In Japan, the Ministry of Health, Labor and Welfare (MHLW) regulates medical devices through the Pharmaceutical Affairs Law, which was reformed effective April 1, 2005. The revisions to Japan’s regulations have resulted in longer lead times for product registration. As a holder of Japanese device licenses, we are also subject to inspection by several Japanese authorities including Japan’s Pharmaceutical and Medical Device Agency (PMDA), Tokyo Metropolitan Government (TMG), and third parties such as Japan’s Electrical Safety & Environmental Technologies Laboratories (JET). Our Japanese office was most recently inspected by TMG in February, 2019, the results of which were satisfactory.

 

Australia regulates the import and sale of medical devices through the Therapeutic Goods Administration (TGA). The TGA has built its regulatory framework around similar requirements to those issued in Europe. As such, many medical devices (those with a lower risk profile) may gain relatively fast marketing clearance using their existing EU-issued CE marking. Higher risk devices (those in EU/Aus Class III) must go through a full design review which can be costly and take longer to complete. Issued licenses for medical devices do not require renewal, but do require an annual fee to remain active in the TGA registry of devices. As a holder of Australian device licenses, we are also subject to inspection by TGA in both Australia and the United States. Our Australian facility was most recently inspected in December 2018, the results of which were satisfactory. Australia requires all foreign manufacturers to have an in country ‘sponsor’ who must have a licensed business inside of Australia. Our licenses are held on our behalf by our sponsor, Emergo Group.

 

In China, the China Food and Drug Administration (CFDA) Medical Device Division regulates and must approve all medical devices to be marketed and sold in China. China has a three-class risk classification system, with Class I being the lowest risk and Class III being the highest risk. Home country approval, such as 510(k) or PMA clearance, is required as a prerequisite to any application. Additionally, the CFDA often tests finished devices at its own testing laboratory to confirm each device’s specifications. The approval process is typically lengthy and usually requires clinical trials. CFDA licenses are valid for five years from date of issuance and require renewal prior to expiration. As a holder of Chinese device licenses, we are subject to inspection by CFDA in both China and the United States. Our China facility was most recently inspected in July 2018, the results of which were satisfactory. The CFDA requires all companies located outside of China to appoint a legal entity who maintains a registered business inside of China as the license holder. After the formation of our Chinese subsidiary in 2015, we transferred our licenses from our third-party license holders to our subsidiary.

 

There can be no assurance that new laws or regulations or new interpretations of laws and regulations regarding the release or sale of medical devices will not delay or prevent sale of our current or future products.

 

Third-Party Reimbursement

 

United States

 

Healthcare providers that purchase medical devices generally rely on third-party payors, including the Medicare and Medicaid programs and private payors (such as indemnity insurers, employer group health insurance programs, and managed care plans) to reimburse all or part of the cost of those products. As a result, demand for our products is and will continue to be dependent in part on the coverage and reimbursement policies of these payors. The manner in which reimbursement is sought and obtained varies based upon the type of payor involved and the setting in which the product is furnished and utilized. For example, Medicare reimbursement policies favor outpatient treatment. Furthermore, payments from Medicare, Medicaid, and other third-party payors are subject to legislative and regulatory changes and are susceptible to budgetary pressures.

 

In the United States, third-party payors generally pay healthcare providers directly for the procedures they perform and in certain instances for the products they use. Our sales volumes depend on the extent to which third-party payors cover our products and the procedures in which they are used. In general, a third-party payor only covers a medical product or procedure when the plan administrator is satisfied that the product or procedure is medically necessary because it improves health outcomes, including quality of life or functional ability, in a safe and cost-effective manner. Even if a device has received clearance or approval for marketing by the FDA, there is no assurance that third-party payors will cover the cost of the device and related procedures in which the device is used.

 

In many instances, third-party payors cover the procedures performed using our products using price fee schedules that do not vary reimbursement to reflect the cost of the products and equipment used in performing those procedures. In other instances, payment or reimbursement is separately available for the products and equipment used, in addition to payment or reimbursement for the procedure itself. Even if coverage is available, third-party payors may place restrictions on the circumstances in which they provide coverage or may offer reimbursement that is not sufficient to cover the cost of our products. Many of the products that compete with ours are less expensive. Therefore, although coverage may be available for our products and the related procedures, the levels of approved coverage may not be sufficient to justify using our products instead of those of competitors.

 

12

 

In addition, many third-party payors are moving to managed care systems in which providers contract to provide comprehensive healthcare for a fixed cost per person rather than the traditional fee for service model. Managed care providers often attempt to control the cost of healthcare by authorizing fewer elective surgical procedures. Under current prospective payment systems, such as the diagnosis-related group system and the hospital out-patient prospective payment system, both of which are used by Medicare and in many managed care systems used by private third party payors, the reimbursement for our products will be incorporated into the overall reimbursement of a procedure, and there will be no separate reimbursement for our products. As a result, we cannot be certain that hospital administrators and physicians will purchase our products.

 

If hospitals and physicians cannot obtain adequate reimbursement for our products or the procedures in which they are used, our business, financial condition, and results of operations could suffer a material adverse impact.

 

Non-U.S.

 

Our success in non-U.S. markets will depend largely upon the availability of reimbursement from the third-party payors through which healthcare providers are paid in those markets. Reimbursement and healthcare payment systems in non-U.S. markets vary significantly by country. The main types of healthcare payment systems are government sponsored healthcare and private insurance. As in the United States, reimbursement is subject to legislative and regulatory changes and is susceptible to budgetary pressures. Reimbursement approval must be obtained individually in each country in which our products are marketed. Outside the United States, we may pursue reimbursement approval in those countries in which we sell directly to the hospital. In other markets, we generally rely on the distributors who sell our products to obtain reimbursement approval in those countries in which they will sell our products. There can be no assurance that reimbursement approval will be received.

 

 

Fraud and Abuse Laws

 

We may directly or indirectly be subject to various federal and state laws pertaining to healthcare fraud and abuse, including anti-kickback laws. In particular, the federal healthcare program Anti-Kickback Statute prohibits persons from knowingly and willfully soliciting, offering, receiving, or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing, arranging for, or recommending a good or service for which payment may be made in whole or part under federal healthcare programs, such as the Medicare and Medicaid programs. Penalties for violations include criminal penalties and civil sanctions such as fines, imprisonment, and possible exclusion from Medicare, Medicaid, and other federal healthcare programs. The Anti-Kickback Statute is broad and prohibits many arrangements and practices that are lawful in businesses outside of the healthcare industry. In implementing the statute, the Office of Inspector General, or OIG, has issued a series of regulations, known as the “safe harbors.” These safe harbors set forth provisions that, if all their applicable requirements are met, will assure healthcare providers and other parties that they will not be prosecuted under the Anti-Kickback Statute. The failure of a transaction or arrangement to fit precisely within one or more safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that do not fully satisfy each applicable element of a safe harbor may result in increased scrutiny by government enforcement authorities, such as the OIG.

 

Patient Protection and Affordable Care Act

 

In March 2010, significant reforms to the U.S. healthcare system were adopted in the form of the Patient Protection and Affordable Care Act (the PPACA). Under the PPACA we are subject to the Physician Payments Sunshine Act, which was enacted as part of the PPACA and requires detailed public disclosure of certain payments and “transfers of value” from us to healthcare professionals, such as the payment of royalties, compensation for services provided such as training, consulting, and reimbursement for travel and meal expenses. Certain states also require us to disclose similar information or even prohibit some forms of these payments.

 

Employees

 

We had 483 employees, including 457 full-time employees, at December 31, 2018.

 

Financial Information by Business Segment and Geographic Data

 

We operate in one reportable industry segment: the design, marketing, sales, service and technical support of medical devices and implants for the treatment of peripheral vascular disease. Our chief operating decision maker is our chief executive officer. Our chief executive officer reviews financial information, accompanied by information about revenue by geographic region for purposes of allocating resources and evaluating financial performance. Information about segment revenue, revenue by geographic area and long-lived assets by geographic area is included in Note 11 to our Consolidated Financial Statements which are included elsewhere in this Annual Report. For information regarding risks associated with our international operations, please refer to the section entitled “Risk Factors” in Item 1A of Part I in this Annual Report on Form 10-K.

 

13

 

Customers

 

Our sales are not dependent on any single customer or distributor, and we continue to expand our distribution channel worldwide through direct and indirect sales forces. No single customer accounted for more than 2% of our net sales in 2018.

 

 

Corporate Information

 

We were incorporated in Massachusetts on November 28, 1983, as Vascutech, Inc. On June 16, 1998, we were reincorporated in Delaware, and on April 6, 2001, we changed our name to LeMaitre Vascular, Inc. On October 19, 2006, we executed our initial public offering, and our common stock trades under the symbol “LMAT.” Our principal executive offices are located at 63 Second Avenue, Burlington, Massachusetts 01803, and our telephone number is (781) 221-2266.

 

Where You Can Find More Information

 

Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available through the investor relations portion of our website (www.lemaitre.com) free of charge as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission, (SEC). Information on our investor relations page and on our website is not part of this Annual Report on Form 10-K or any of our other securities filings unless specifically incorporated herein or therein by reference. In addition, our filings with the Securities and Exchange Commission may be accessed through the Securities and Exchange Commission’s Electronic Data Gathering, Analysis and Retrieval (EDGAR) system at www.sec.gov. All statements made in any of our securities filings, including all forward-looking statements or information, are made as of the date of the document in which the statement is included, and we do not assume or undertake any obligation to update any of those statements or documents unless we are required to do so by law. In addition, our Corporate Governance Guidelines, Code of Business Conduct and Ethics and Charters of our Audit, Compensation and Nominating and Corporate Governance Committees are available on our website and are available in print to any stockholder who requests such information.

 

Item 1A.

Risk Factors

 

Investing in our securities involves a high degree of risk. You should consider carefully the following information about the risks described below, together with the other information contained in this Annual Report on Form 10-K and in our other public filings in evaluating our business. The following important factors, among others, could cause our actual operating results to differ materially from those indicated or suggested by forward-looking statements made in this Annual Report on Form 10-K or presented elsewhere by management from time to time. Investors should carefully consider the risks described below before making an investment decision. The risks described below are not the only ones we face. Additional risks not presently known to us or that we currently believe are not material may also significantly impair our business operations. Our business could be harmed by any of these risks. The trading price of our common stock could decline due to any of these risks, and investors may lose all or part of their investment.

 

Risks Related to Our Business

 

We may experience significant fluctuations in our quarterly and annual results.

 

Fluctuations in our quarterly and annual financial results have resulted and will continue to result from numerous factors, including:

 

 

changes in demand for the products and services we sell;

 

 

the acceleration or deceleration of growth rates of our products, particularly in the case of biologic vascular patches whose growth rate has declined over recent periods;

 

 

increased product and price competition, due to market conditions, the regulatory landscape or other factors;

 

 

changes in the mix of products and services we sell;

 

 

our pricing strategy with respect to different product lines and services;

 

 

strategic actions by us, such as acquisitions of businesses, products, or technologies;

 

 

 

effects of domestic and foreign economic conditions and exchange rates on our industry and/or customers;

 

 

the divestiture or discontinuation of a product line or other revenue generating activity;

 

 

the relocation and integration of manufacturing or processing operations and other strategic restructuring;

 

 

regulatory actions that may necessitate recalls of our products or warning letters that negatively affect the markets for our products;

 

14

 

 

changes to the regulatory status of our products, including suspension or cancellation of licenses or CE marking;

 

 

changes in foreign political relations that add additional barriers to entry;

 

 

our determination whether or not to continue the payment of quarterly cash dividends, and/or the amount and frequency at which to increase them;

 

 

costs incurred by us in connection with the termination of contractual and other relationships, including those of distributors or agents;

 

 

our ability to collect outstanding accounts receivable in selected countries outside of the United States;

 

 

changes in tax laws in the jurisdictions in which we do business;

 

 

the expiration, elimination or utilization of deferred tax assets such as net operating loss carry-forwards;

 

 

market reception of our new or improved product and service offerings; and

 

 

the loss of any significant customer, especially in regard to any product or service that has a limited customer base.

 

These factors, some of which are not within our control, may cause the price of our common stock to fluctuate substantially. If our quarterly operating results fail to meet or exceed the expectations of securities analysts or investors, our stock price could drop suddenly and significantly. We believe the quarterly comparisons of our financial results are not always meaningful and should not be relied upon as the sole indicator of our future performance.

 

 

If we are unable to expand our product and service offerings, we may not achieve our growth objectives and our results of operations could suffer.

 

The treatment of peripheral vascular disease is shifting from open vascular surgery to minimally invasive endovascular procedures, and many of our products are used primarily or exclusively in open vascular surgery procedures. We market and sell our products primarily to vascular surgeons, and the majority of our marketing efforts and sales relate to products used in open vascular surgery rather than in endovascular procedures. We estimate that in 2018, 91% of our net sales were from devices used in open vascular surgery.

 

We may not be able to compete effectively with our competitors unless we can keep pace with existing or new products, services and technologies in the vascular device market and the minimally invasive endovascular procedure segment, in particular. Our success in developing and commercializing new products and new versions of our existing products and services is affected by our ability to:

 

 

recognize in a timely manner new market trends and customer needs;

 

 

identify products or services that address those trends or needs;

 

 

obtain regulatory clearance or approval of new products and technologies;

 

 

successfully develop cost-effective manufacturing processes for such products;

 

 

commercially introduce such products, services and technologies; and

 

 

achieve market acceptance.

 

If we are unable to expand our product or service offerings, we may not achieve our growth objectives and our results of operations as well as our stock price could suffer.

 

We may not maintain our recent levels of profitability.

 

While we reported growth in operating and net income in each of the years ended December 31, 2018, 2017 and 2016, there can be no assurance we will continue to achieve significant net sales growth and/or profit growth in the future. If, for example, we are unable to effectively manage our operating expenses due to, for example, increased headcount, we may need to reduce our operating expenses in other areas in order to maintain or improve operating profitability. Decreased investment levels may inhibit future growth in net sales and earnings.

 

Additionally, our ability to maintain and increase profitability will be influenced by many factors, including:

 

 

the level and timing of future sales, manufacturing costs and operating expenses;

 

 

market acceptance of our new products and services;

 

 

the productivity of our direct sales force and distributors;

 

 

fluctuations in foreign currency exchange rates;

 

15

 

 

our ability to successfully build direct sales organizations in new markets;

 

 

our ability to successfully acquire and develop competitive products;

 

 

our ability to successfully integrate acquired businesses, products, services or technologies;

 

 

the impact on our business of competing products, technologies, and procedures;

 

 

our ability to obtain or maintain regulatory approvals for our products in new and existing markets;

 

 

the reimbursement rates for the medical procedures in which our products are used;

 

 

the cost of litigation, if any; and

 

 

changes in tax laws.

 

 

 

If we do not comply with foreign regulatory requirements to market our products outside the United States, our business will be harmed.

 

Sales of medical devices outside the United States are subject to international regulatory requirements that vary from country to country. These requirements and the amount of time required for approval may differ from our experiences with the FDA in the United States. In some cases, we rely on our international distributors to obtain premarket approvals, complete product registrations, comply with clinical trial requirements, and complete those steps that are customarily taken in the applicable jurisdictions to comply with governmental and quasi-governmental regulation. In the future, we expect to continue to rely on distributors in this manner in those countries where we continue to market and sell our products through them. Failure to satisfy these foreign regulations would impact our ability to sell our products in these countries and could cause our business to suffer. There can be no assurance that we will be able to obtain or maintain the required regulatory approvals in these countries.

 

 

Our products are regulated in the EU under the European Medical Devices Directive (93/42/EC as amended by 2007/47/EC). In order to market our medical devices in the EU, we are required to obtain CE mark certification, which denotes conformity to the essential requirements of the Medical Devices Directive. We have received CE mark certification to sell nearly all of our products. However, in April 2017, the EU adopted new regulations for medical devices (MDR), which replace the Directive and apply after a three year transition period. Our products will be subject to the MDR, which require all of our products, regardless of classification, to obtain a new CE mark in accordance with the new, more stringent standards under the MDR. For example, as a condition to CE mark approval, clinical evidence from clinical investigations will be required for Class III and implantable devices. As our Notified Bodies begin to transition from MDD to MDR, they have begun to impose more rigorous requirements on us in order to obtain approval to renew the CE marks on certain of our products. For example, we have been informed by our Notified Body for the product lines manufactured in our Saint-Etienne, France facility, that they require more clinical data for the renewal of the CE marks for such devices. There can be no assurance that we will be able to obtain or maintain CE marks for our existing products, and obtaining CE marks may involve a significant amount of time and expense, stringent clinical and preclinical testing, or modification of our products and could result in limitations being placed on the use of our products in order to obtain approval. If we fail to obtain new CE marks on our products under the MDR in a timely manner, or at all, future sales of our products could be adversely impacted.

 

Maintaining a CE mark is contingent upon our continued compliance with applicable European medical device requirements, including limitations on advertising and promotion of medical devices and requirements governing the handling of adverse events. There can be no assurance that we will be successful in maintaining the CE mark for any of our current products. In particular, adverse event reporting requirements in the EU mandate that we report incidents which led or could have led to death or serious deterioration in health. Under certain circumstances, we could be required to or could voluntarily initiate a recall or removal of our product from the market in order to address product deficiencies or malfunctions. Any recall of our products may harm our reputation with customers and divert managerial and financial resources.

 

Failure to receive or maintain approval would prohibit us from selling these products in member countries of the EU, and would require significant delays in obtaining individual country approvals. If we do not receive or maintain these approvals, our business could be harmed.

 

16

 

Our manufacturing facilities are subject to periodic inspection by numerous regulatory authorities, including governmental agencies and Notified Bodies, and we must demonstrate compliance with their applicable medical devices regulations. Our most recent inspections were as follows:

 

 

Facility

Agency

Jurisdiction

Date

Burlington

U.S. FDA

United States

August 2017

Canada

Health Canada

Canada

August 2017

Fox River Grove

AATB

Worldwide

January 2018

Fox River Grove

U.S. FDA

United States

January 2018

Burlington

Notified Body (LRQA)

Europe

January 2018

Australia

Notified Body (TUV)

Europe

January 2018

Burlington

Notified Body (LRQA)

United States Medical

Device Single Audit Program

October 2018

Burlington

Notified Body (LRQA)

Europe

November 2018

Australia

Notified Body (TUV)

Europe

November 2018

Australia

Therapeutic Goods Administration (TGA)

Australia

December 2018

Burlington

Notified Body (LRQA)

Europe

December 2018

Burlington

Korean FDA

Korea

January 2019

Tokyo

Tokyo Metropolitan Government

Japan

February 2019

 

Any failure by us to comply with regulatory requirements in this regard may entail our taking corrective action, such as modification of our policies and procedures. In addition, we may be required to cease all or part of our operations for some period of time until we can demonstrate that appropriate steps have been taken. There can be no assurance that we will be found in compliance with such standards in future audits.

 

We also pursue registrations in other jurisdictions in which we sell our devices directly, such as Japan and China. In 2015, the China Food and Drug Administration significantly increased the application fees for product registrations and imposed additional requirements for obtaining product approval, which includes requirements for conducting clinical trials to support the registration application process on newly introduced products in China. As a result, we may not seek registration for certain products where the cost is not justified. Any delay in product registrations could have a negative impact on our results of operations.

 

 

We may acquire businesses and assets in the future. We may experience difficulties in completing the integration of these acquisitions into our business, or we may not realize the anticipated benefits of these acquisitions.

 

In order to expand our product offerings, we have completed 21 acquisitions, and a key part of our strategy is to acquire additional businesses, products, or technologies in the future. Our growth strategy depends, in part, upon our ability to identify, negotiate, complete, and integrate suitable acquisitions. If we are unable to complete acquisitions on satisfactory terms or at all, our growth objectives and sales could be negatively affected.

 

Even if we complete acquisitions, we may experience:

 

 

difficulties in integrating any acquired businesses, personnel, and products into our existing business;

 

 

difficulties or delays in integrating manufacturing operations into our existing business or successfully replicating manufacturing processes at new manufacturing facilities on a cost-effective basis;

 

 

degradation in our corporate gross margin due to lower margins associated with our acquired devices;

 

 

the sudden reduction in volume or loss of orders from a key customer, particularly where the acquired company had concentrated sales;

 

 

diversion of our management’s time and attention from other business concerns;

 

 

higher costs of integration than we anticipated;

 

 

unknown or unanticipated liabilities included as part of the acquisition;

 

 

disputes or litigation with former owners related to contingent payments, liabilities assumed or not assumed or other matters;

 

17

 

 

challenges in complying with new regulatory requirements to which we were not previously subject;

 

 

increased regulatory scrutiny;

 

 

challenges in maintaining or obtaining regulatory approvals for acquired products;

 

 

difficulties in retaining key employees of the acquired business who are necessary to manage these acquisitions;

 

 

difficulties if the acquired company is remote or inconvenient to our Burlington, Massachusetts, headquarters, such as the operations we acquired in 2014 in Australia and in 2018 in France;

 

 

difficulties or delays in transitioning clinical studies or unfavorable results from such clinical studies;

 

 

loss of key suppliers or issues with the ongoing supply of the acquired product from its former owners;

 

 

charges related to the acquisition of in-process research and development;

 

 

dilution as a result of equity financing required to fund acquisition costs; or

 

 

debt, as a result of debt financing required to fund acquisitions, which would be senior to our common stock, would require interest payments to a lender, and could restrict our ability to pay dividends to our shareholders.

 

We could also discover deficiencies withheld from us due to fraud or otherwise not uncovered in our due diligence prior to an acquisition, including but not limited to deficiencies in internal controls, data adequacy and integrity, product quality, and regulatory compliance, as well as undisclosed contractual or other liabilities and product liabilities, any of which could result in us becoming subject to penalties or other liabilities. Any of these difficulties could negatively impact our ability to realize the intended and anticipated benefits that we currently expect from our acquisitions or from acquisitions we complete in the future, and could harm our financial condition and results of operations.

 

We also acquired the processing, preservation and distribution operations of RestoreFlow allografts located in Fox Rover Grove, Illinois. See “Our tissue processing and preservation services are subject to a variety of risks, including those related to the procurement of human tissue and regulatory requirements” below for risks associated with our tissue processing and preservation services.

 

For any of these reasons or as a result of other factors, we may not realize the anticipated benefits of our acquisitions and our operating results may be harmed.

 

Our call point focus on the vascular surgeon with a product portfolio largely used in open surgical procedures may be too narrow, which may adversely affect our future sales.

 

The treatment of peripheral vascular disease continues to shift from open vascular surgery to minimally invasive endovascular procedures. We market and sell our products primarily to vascular surgeons, and the majority of our marketing efforts and sales relate to products used in open vascular surgery rather than in endovascular procedures. We estimate that in 2018, 91% of our net sales were from devices used in open vascular procedures.

 

In addition to performing traditional open surgical procedures, vascular surgeons in growing numbers also perform minimally invasive, image-guided interventional procedures for peripheral vascular disease. However, vascular surgeons may not adopt these procedures in the numbers we expect and instead these procedures may be largely performed by interventional cardiologists and interventional radiologists. Many of our competitors have focused their sales efforts on these interventionalists. If interventional cardiologists and interventional radiologists perform a greater percentage of these new procedures than we expect, our net sales may decline.

 

Moreover, demographic trends and other factors, such as reimbursement rates, are also driving vascular surgeons in the United States and potentially in other markets to increasingly specialize in certain kinds of procedures, such as the creation and maintenance of dialysis access sites and endovascular therapies. Vascular surgeon training programs may focus on those therapies to the exclusion of open vascular procedures. If there is a decline in vascular surgeons training in open vascular procedures in favor of training in minimally invasive endovascular procedures, this could limit the number of vascular surgeons using our products due to lack skills in open vascular procedures. Further, even those physicians trained in open procedures may discontinue performing them if there is a lack of demand. If this trend continues, it could lead to the fragmentation of our customer base, which would reduce cross-selling opportunities and the efficiency of each sales call by our sales representatives, which in turn could negatively impact our business.

 

18

 

Our tissue processing and preservation services are subject to a variety of risks, including those related to the procurement of human tissue and regulatory requirements.

 

In November 2016, we acquired the processing, preservation and distribution operations for the RestoreFlow allograft. Prior to the acquisition, we did not provide any services related to human tissue. Our ability to successfully provide such services may be affected by the following:

 

 

maintenance of quality standards and controls to mitigate the risk that processed tissue cannot be sterilized;

 

 

compliance with regulatory and legal requirements specific to human tissue, with which we were previously unfamiliar, or changes in those requirements;

 

 

maintenance of our AATB accreditation, FDA establishment registration and state licensures;

 

 

the degree to which our tissue procurement organizations are successful in procuring the gift of tissue donation;

 

 

procurement from tissue procurement organizations of adequate amounts of human tissue of a type and quality that meets our specifications;

 

 

processing human tissue in a cost effective manner;

 

 

controlling turnover in a workforce skilled in tissue processing and cryopreservation and any subsequent delay necessary for the adequate training of new personnel; and

 

 

compliance of our tissue procurement organizations to current good tissue practices and our own procurement procedures.

 

Our failure in any one or more of these areas could adversely impact our ability to provide processing, preservation and distribution services related to allografts and therefore our operations.

 

Our dependence on sole- and limited-source suppliers could hinder our ability to deliver our products and services to our customers on a timely basis or at all and could harm our results of operations.

 

We rely on sole- and limited-source suppliers for some of our important product components and certain products. For example, our TRIVEX system and associated disposables, as well as components of our EndoRE remote endarterectomy product line, are manufactured for us by third-party suppliers. Additionally, we rely on a sole-source supplier for the ovine material used for our Omniflow II biosynthetic vascular graft.

 

There are relatively few, or in some cases no, alternative, validated sources of supply for these components and products. And in some cases, we do not have supply agreements with these suppliers, instead placing orders on an as-needed basis. At any time, these suppliers could discontinue or become incapable of the manufacture or supply of these components or products on acceptable terms or otherwise. We do not ordinarily carry a significant inventory of these components and products. Identifying and qualifying additional or replacement suppliers, if required, may not be accomplished quickly or at all and could involve significant additional costs. Any supply interruption from our suppliers or failure to obtain replacement suppliers would interrupt our ability to manufacture our products and result in production delays and increased costs, and may limit our ability to deliver products to our customers. This could lead to customer dissatisfaction and damage to our reputation, and our financial condition or results of operations could be harmed.

 

With respect to our RestoreFlow allografts, we rely on tissue procurement organizations to provide donated tissue to us for processing and cryopreservation. While we have relationships with multiple tissue procurement organizations, we cannot be sure that the supply of suitable human tissue will be available to us at the levels we need, in which case our allografts revenues could be adversely affected.

 

Any disruption in our manufacturing facilities could harm our results of operations.

 

Our principal worldwide executive, distribution, and manufacturing operations are located in four leased facilities located in Burlington, Massachusetts. We also have manufacturing sites in North Melbourne, Australia and Saint-Etienne, France and a tissue processing preservation and distribution facility in Fox River Grove, Illinois. These facilities and the equipment we use to manufacture our products would be difficult to replace and could require substantial lead-time to repair or replace in the event of a natural or man-made disaster. In such event, we could not shift production or processing to alternate manufacturing facilities, and we would be forced to rely on third-party manufacturers, if available at all. Although we carry insurance for damage to our property and the disruption of our business from casualties, such insurance may not be sufficient to cover all of our potential losses, including potential damage to our reputation, and may not continue to be available to us on acceptable terms, or at all.

 

19

 

We depend on our senior management team and other key sales and technical personnel, and if we are unable to retain them or recruit additional qualified personnel we may not be able to manage our operations and meet our strategic objectives.

 

We depend on the continued services of our senior management team and other key sales and technical personnel, as well as our ability to continue to attract and retain additional highly qualified personnel. Each of our key employees may terminate his or her employment with us at any time, and the loss of any of our senior management team or key employees could harm our business. Because we compete for such personnel with other companies, academic institutions, government entities, and other organizations, we may not be able to meet our future hiring needs or retain existing personnel on acceptable terms. Any loss or interruption of the services of our key personnel could also significantly reduce our ability to effectively manage our operations and meet our commercial or strategic objectives, because we cannot assure you that we would be able to find an appropriate replacement on a timely basis when the need arises.

 

Certain of our products contain materials derived from animal sources and may become subject to additional regulation.

 

Our AlboGraft vascular graft, AlboSure vascular patch, Dialine II vascular graft, Wovex vascular graft, XenoSure biologic patch and ProCol vascular graft products contain bovine tissue or material derived from bovine sources, our Omniflow II Biosynthetic Vascular Graft contains ovine tissue, and our surgical glue contains porcine gelatin. Products that contain materials derived from animal sources, including food, pharmaceuticals and medical devices, are increasingly subject to scrutiny in the media and by regulatory authorities. Regulatory authorities are concerned about the potential for the transmission of disease from animals to humans via those materials. This public scrutiny has been particularly acute in Japan and Western Europe with respect to products derived from animal sources, because of concern that bovine materials infected with the agent that causes bovine spongiform encephalopathy, otherwise known as BSE or mad cow disease, may, if ingested or implanted, cause a variant of the human Creutzfeldt-Jakob Disease, an ultimately fatal disease with no known cure. Cases of BSE in cattle discovered in Canada and the United States have increased awareness of the issue in North America. Certain regions or countries have issued regulations that require products to be processed from bovine tissue sourced from countries, like Australia or New Zealand, where no cases of BSE have occurred. Products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for the transmission of infectious agents. Significant new regulation, or a ban of our products, could impair our current business or our ability to expand our business, and in the case of a ban or suspension, could materially and adversely affect our results of operations.

 

 

We face intense competition from other companies, technologies, and alternative medical procedures and we may not be able to compete effectively.

 

The segments in which we compete are highly competitive, subject to change, and significantly affected by new product introductions and other activities of industry participants. Although no one company competes against us in all of our product lines or services, a number of manufacturers of peripheral vascular devices have substantially greater capital resources, larger customer bases, broader product lines, larger sales forces, greater marketing and management resources, larger research and development staffs, and larger facilities than ours; have established reputations with our target customers; and have developed worldwide distribution channels that are more effective than ours. Our competitors could elect to devote additional resources to the segments in which we currently enjoy less competition. Also, although we currently have leading positions in the segments for some of our products, this is not true for all of our products. From time to time, we have experienced difficulties competing against large companies.

 

Recent industry consolidation could make the competitive environment more difficult for smaller companies like ours. Our competitors may be companies who are larger than us and who have substantially greater financial, technological, research and development, regulatory, marketing, sales, and personnel resources than we do. Certain of these competitors are able to manufacture at lower costs and may therefore offer comparable products at lower prices. Certain of these competitors may also have greater experience in developing and further improving products, obtaining regulatory approvals, and manufacturing and marketing such products. Certain of these competitors may obtain patent protection or regulatory approval or clearance, or achieve product commercialization, before us, any of which could materially adversely affect us. Further, if the trend towards endovascular procedures versus open vascular procedures continues or accelerates, our competitors may be better poised to take advantage of that trend, since our main product lines are used primarily in open vascular procedures. Because of the size of the vascular disease market opportunity, competitors and potential competitors have dedicated significant resources to aggressively promote their products. Also, new product developments that could compete with us more effectively are likely because the vascular disease market is characterized by extensive research efforts and technological progress. Competitors may develop technologies and products that are safer, more effective, easier to use, less expensive, or more readily accepted than ours. Their products could make our technology and products obsolete or noncompetitive. Our competitors may also be able to achieve more efficient manufacturing and distribution operations than we can. In addition, many of our products face competition from alternative procedures that utilize a different kind of medical device that we do not currently sell. Increased competition could also result in price reductions and loss of market share, any of which could result in lower revenues and reduced gross profits.

 

If we are unable to increase our selling prices to customers, or if we are required to make price concessions, our rate of net sales growth could be reduced and our operating results could suffer.

 

In the years ended December 31, 2018, 2017 and 2016, a material portion of our increases in net sales was driven by higher average selling prices to our hospital customers across several of our product lines, particularly with respect to sales of our LeMaitre Valvulotome and with respect to sales occurring in the United States. In the past, we have been able to rely upon our intellectual property position, our well-known brands, and our established reputation to implement price increases. We implemented a significant price increase in 2015 for our LeMaitre Valvulotome, and our ability to implement additional price increases with respect to that product in the future may be limited. We also experienced an increase in net sales of our XenoSure biologic patch in 2016, which was due in part to the recall of a competitive product. That recall has since been resolved, and we have only retained a portion of the customers who switched to our product during the recall.

 

20

 

Additionally, we may become unable to implement further increases in the selling prices of our products:

 

 

if healthcare spending is reduced, particularly in the United States, in response to government-enacted healthcare reform, general economic conditions, or the influence of accountable care organizations;

 

 

 

if the reimbursement rates for the medical procedures in which our products are used are reduced or limited; or

 

 

if competitors introduce lower-priced products of comparable safety and efficacy.

 

We also expect marketplace changes to increasingly place pressure on medical device pricing as hospitals join group purchasing organizations, integrated delivery networks, managed care organizations and other groups that seek to aggregate purchasing power and as hospitals are given financial incentives to improve quality and reduce costs. Due to pricing pressures, surgeons may even perform alternative procedures in which our products are unnecessary.

 

If we become unable to raise selling prices, or if we are required to make price concessions, it could reduce our rate of net sales growth and harm our operating results.

 

The risks inherent in operating internationally and the risks of selling and shipping our products and of purchasing our components and products internationally may adversely impact our net sales, results of operations, and financial condition.

 

We derive a significant portion of our net sales from operations in markets outside of the United States. For the year ended December 31, 2018, 44% of our net sales were derived from operations outside of the United States. Our international sales operations expose us and our representatives, agents, and distributors to risks inherent in operating in foreign jurisdictions. These risks include:

 

 

fluctuations in foreign currency exchange rates;

 

 

the imposition of additional U.S. and foreign governmental controls or regulations, including export licensing requirements, duties and tariffs, and other trade restrictions, whether due to, or in reaction to, changes in U.S. trade policy;

 

 

the risk of non-compliance with the Foreign Corrupt Practices Act by our sales representatives or our distributors;

 

 

changing medical device regulations that may impede our ability to register our products in a jurisdiction;

 

 

the imposition of U.S. and/or international sanctions against a country, company, person, or entity with whom we do business that would restrict or prohibit continued business with the sanctioned country, company, person, or entity, whether due to , or in reaction to, changes in U.S. foreign policy under President Trump or otherwise;

 

 

a shortage of high-quality sales personnel and distributors;

 

 

loss of any key personnel who possess proprietary knowledge, or who are otherwise important to our success in certain international markets;

 

 

changes in third-party reimbursement policies that may require some of the patients who receive our products to directly absorb medical costs or that may necessitate the reduction of the selling prices of our products;

 

 

the imposition of restrictions on the activities of foreign agents, representatives, and distributors;

 

 

scrutiny of foreign tax authorities, which could result in significant fines, penalties, and additional taxes being imposed on us;

 

 

pricing pressure that we may experience internationally;

 

 

laws and business practices favoring local companies;

 

 

longer payment cycles;

 

 

 

difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;

 

 

difficulties in enforcing or defending intellectual property rights;

 

 

exposure to different legal and political standards; and

 

 

political, economic, and/or social instability.

 

We cannot assure you that one or more of these factors will not harm our business. Any material decrease in our international sales would adversely impact our net sales, results of operations, and financial condition.

 

21

 

If Brexit results in greater restrictions on imports and exports between the United Kingdom and the European Union or increased regulatory complexity, then our operations and financial results could be negatively impacted.

 

As of the date of this report, the United Kingdom (UK) is scheduled to exit the European Union (EU) on March 29, 2019. There continues to be uncertainty regarding the economic and regulatory impact of the UK’s exit (referred to as “Brexit”). Potential adverse consequences of Brexit such as global market uncertainty, volatility in currency exchange rates, greater restrictions on imports and exports between the UK and the EU and increased regulatory complexity could have a negative impact on our business, financial condition and results of operations.

 

We currently ship products to the UK from our Sulzbach, Germany location. If Brexit results in greater restrictions on imports and exports between the UK and the EU, we may find it necessary to make operational changes to adapt to those restrictions. We may be unable to make such changes in a commercially reasonable or timely manner or at all. Additionally, this could result in higher costs of doing business in the UK and possibly the EU.

 

The Notified Bodies that issue a majority of our CE marks are located in the United Kingdom. These United Kingdom Notified Bodies are accredited to issue CE marks by the United Kingdom’s health authority, MHRA. If the United Kingdom were to leave the EU without a signed withdrawal agreement on March 29, 2019, these CE marks would no longer be recognized by the EU countries, and there would be a lapse in our CE marking. As such, only product built and sold to our European subsidiary prior to March 29, 2019 would be eligible for sale to EU countries while we awaited reissuance of the CE marks by a properly accredited Notified Body. In such event, we would expect reinstatement of the CE marks by the second half of 2019 and until such time, we would expect to continue selling product from our inventory reserves already on the market in Europe prior to March 29, 2019. Any delay in obtaining, or an inability to obtain or maintain, any regulatory approvals, as a result of Brexit or otherwise, could prevent us from selling our products in the UK and/or the EU and could constrain our ability to generate revenue from those geographies.

 

The use or misuse of our products and tissues we distribute may result in injuries that lead to product liability suits, which could be costly to our business.

 

If our products or the tissue we process and preserve are defectively designed, manufactured, processed or labeled, contain defective components, or are misused, or if our products or the tissues we process and preserve are found to have caused or contributed to injuries or death, we may become subject to costly litigation by our customers or their patients. Although we offer training for physicians, we do not require that physicians be trained in the use of our products or the tissues we distribute, and physicians may use our products or the tissues we distribute incorrectly or in procedures not contemplated by us. We are from time to time involved in product liability claims. Product liability claims could divert management’s attention from our core business, be expensive to defend, and result in sizable damage awards against us. Claims of this nature may also adversely affect our reputation, which could damage our position in the market and subject us to recalls.

 

We cannot assure you that our product liability insurance coverage will be sufficient to satisfy any claim made against us. Further, we may not be able to maintain the same level of coverage, and we may not be able to obtain adequate coverage at a reasonable cost and on reasonable terms, if at all. Any product liability claim brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing coverage in the future. Additionally, if any such product liability claim or series of claims is brought against us for uninsured liabilities or is in excess of our insurance coverage, our business could be harmed.

 

From time to time, we are involved in litigation where the outcome is uncertain and which could entail significant expense.

 

We are subject, from time to time, to legal proceedings and litigation, including, but not limited to, actions relating to product liability, employment matters, intellectual property, contract disputes and other commercial matters.  For example, although the amount in controversy is not material, a former distributor in China has recently filed suit against us related to the sale of our powered phlebectomy devices in China.  Because the outcome of litigation is inherently difficult to predict, it is possible that the outcome of litigation, or even simply the defense of litigation, could entail significant cost for us, divert management’s time and attention and harm our business.  Additionally, we could experience adverse effects of litigation even before finally adjudicated if a counterparty is granted intermediate relief such as an injunction.  Even claims without merit could subject us to adverse publicity and require us to incur significant legal fees. The fact that we operate in international markets also increases the risk that we may face legal exposures as we seek to comply with a large number of varying legal and regulatory requirements. If any such proceedings were to result in an unfavorable outcome, it could adversely affect our business, financial condition and results of operations.

 

22

 

If we fail to convert additional countries or products from distributor sales to direct sales, or encounter difficulties in effecting such conversions, our results of operations could suffer.

 

We have a history of converting international distributor sales to direct-to-hospital sales by buying out our foreign distributor agreements and selling direct-to-hospital through our own sales representatives. In the future, we may elect to convert select additional countries and products from distributor sales to direct-to-hospital sales. Such conversions sometimes result in disruptions in our sales in the applicable geographies. These transitions may also have an adverse effect on our cash flow because distributors, unlike direct sales representatives, pay us for inventory that they stock for later sale. In addition, switching to a direct sales force may subject us to longer customer collection times and larger bad debt expense, since we would be required to collect customer payments directly rather than through a distributor.

 

 

Our distribution agreements are exclusive, where permissible, with terms of up to five years. These agreements may temporarily constrain our ability to convert certain countries or products from a distributor to a direct-to hospital model. In order to ensure a successful market transition, we may compensate a distributor in connection with the termination of their distributorship, even where the payment of compensation is not required by contract or local law.

 

Following termination of any distribution agreement, we may encounter difficulties in transitioning to a direct-to-hospital model in any country in question. The transition to a direct sales model may require us to meet regulatory requirements that were previously the responsibility of the distributor, which may subject us to additional costs. It also may take us longer than expected to find sufficient qualified sales personnel to establish an effective sales force, which could negatively impact projected sales. If a distributor sold our products through a network of sales agents, rather than exclusively through its own personnel, we may not be able to establish relationships with all members of that network, temporarily limiting our access to the existing market. Similarly, failure to maintain or quickly re-establish a distributor’s close relationships with the physicians who use our products could reduce sales. Further, it may be difficult or impossible to transfer the assignment of a distributor’s rights to sell our products, and as a result, sales to customers may be delayed until a new agreement or approval is obtained. The transition to a direct sales model may also require us to incur additional expenses and may be time-consuming to manage remotely, as is the case with our sales office in China. As a result of these risks, there can be no assurance that we will be successful in transitioning to a direct sales model in the countries that we select, and difficulties that we encounter in these transitions could negatively affect our business.

 

Fluctuations in the exchange rate of the U.S. dollar and other currencies may adversely impact our results of operations.

 

Our results of operations are reported in U.S. dollars. While the majority of our revenue is denominated in U.S. dollars, a significant portion of our revenue and costs is denominated in other currencies, such as the Euro, the British pound, the Japanese yen, the Canadian dollar and the Australian dollar. As of December 31, 2018, 44% of our net sales were transacted in currencies other than the U.S. dollar. As a result, we face exposure to movements in currency exchange rates. Our results of operations and our operating expenses are exposed to foreign exchange rate fluctuations as the financial results of those operations are translated from local currency into U.S. dollars upon consolidation. If the U.S. dollar weakens against the local currency, the translation of these foreign currency-based local operations will result in increased net assets, revenue, operating expenses, and net income. Similarly, our local currency-based net assets, revenue, operating expenses, and net income will decrease if the U.S. dollar strengthens against the local currency. Additionally, receivable and payable balances denominated in currencies other than the functional currency may result in gains and losses upon settlement that may adversely impact our results of operations.

 

Risks Related to the Regulatory Environment

 

Oversight of the medical device industry might affect the manner in which we may sell medical devices and compete in the marketplace.

 

There are laws and regulations that govern the means by which companies in the healthcare industry may market their products and services to healthcare professionals and may compete by discounting the prices of their products and services, including for example, the federal Anti-Kickback Statute, the federal False Claims Act, the federal Health Insurance Portability and Accountability Act of 1996, state law equivalents to these federal laws that are meant to protect against fraud and abuse and analogous laws in foreign countries. Violations of these laws are punishable by criminal and civil sanctions, including, but not limited to, civil and criminal penalties, damages, fines, exclusion from participation in federal and state healthcare programs, including Medicare and Medicaid. Although in structuring our sales and marketing practices and customer discount arrangements we strive to comply with those laws and regulations, we cannot assure you that:

 

 

government officials charged with responsibility for enforcing those laws will not assert that our sales and marketing practices or customer discount arrangements are in violation of those laws or regulations; or

 

 

 

government regulators or courts will interpret those laws or regulations in a manner consistent with our interpretation.

 

Federal and state laws are also sometimes open to interpretation, and from time to time we may find ourselves at a competitive disadvantage if our interpretation differs from that of our competitors.

 

23

 

Our business is subject to complex, costly, and burdensome regulations. We could be subject to significant penalties if we fail to comply.

 

The production and marketing of our products and services and our ongoing research and development are subject to extensive regulation and review by numerous governmental authorities both in the United States and abroad. U.S. and foreign regulations applicable to medical devices and human tissues are wide-ranging and govern, among other things, the testing, marketing, and premarket clearance or approval of new medical devices and services related to human tissues, as applicable, in addition to regulating manufacturing and processing practices, reporting, promotion and advertising, importing and exporting, labeling, and record-keeping procedures.

 

Our failure to comply with applicable regulatory requirements could result in governmental agencies or a court taking action, including any of the following:

 

 

issuing public warning letters to us;

 

 

imposing fines and penalties on us;

 

 

issuing an injunction preventing us from manufacturing, processing, selling or distributing our products;

 

 

bringing civil or criminal charges against us;

 

 

delaying the introduction of our new products into the market;

 

 

ordering a recall of, or detaining or seizing, our products or cryopreserved human tissue; or

 

 

withdrawing or denying approvals or clearances for our products.

 

If any or all of the foregoing were to occur, our business, results of operations, and reputation could suffer.

 

If we are not successful in obtaining and maintaining clearances and approvals from governmental agencies for our medical devices, we will not be able to sell our products, and our future growth will be significantly hampered.

 

Our products require premarket clearance or approval in the United States and the CE Mark or other approvals in foreign countries where they are sold. Each medical device that we wish to market in the United States generally must receive either 510(k) clearance or approval of a premarket application, or PMA, from the FDA before the product can be marketed or sold. Either process can be lengthy and expensive. The FDA’s 510(k) clearance procedure usually takes three to twelve months from the date the FDA receives the application, but may take longer. Although 510(k) clearances have been obtained for nearly all of our current products that require such clearances, the FDA may condition, limit or prohibit our sales of these products if safety or effectiveness problems develop with the devices. Our new products or significantly modified existing products could be denied 510(k) clearance and required to undergo the more burdensome PMA approval process if they are not found to be substantially equivalent.

 

The PMA approval process is much more costly, lengthy, and uncertain than the premarket notification process. It generally takes from six months to three years from the date the application is submitted to, and filed with, the FDA, and may take longer. Achieving premarket approval typically requires extensive clinical trials and may require the filing of numerous amendments with the FDA over time. The FDA may also require post-approval studies to continue demonstrating the safe and effective performance of these devices. We do not have significant experience in obtaining PMA approval or conducting these studies for our products.

 

 

The FDA has previously proposed changes for which FDA clearance to market would possibly require clinical data, more extensive manufacturing information and post market data. As part of the 510(k) reform, the FDA proposes to issue regulations defining grounds and procedures for rescission of 510(k) applications that have previously been cleared to market. Additionally, in April 2018, the FDA announced the Medical Device Safety Action Plan: Protecting Patients, Promoting Public Health in which the FDA has proposed limiting the age of predicate devices used in 510(k) applications, thus narrowing the field of available predicates for comparison in the 510(k) process. The FDA may also require the more extensive PMA process for certain products. Our ability to market our products outside the United States is also subject to regulatory approval, including our ability to demonstrate the safety and effectiveness of our products in the clinical setting. Even if regulatory approval or clearance of a product is granted, the approval or clearance could limit the uses or the claims for which the product may be labeled and promoted, which may limit the market for our products. If we do not obtain and maintain foreign regulatory or FDA approval with respect to our products, as applicable, we will not be able to sell our products, and our future growth will be significantly hampered.

 

If we or some of our suppliers fail to comply with the FDA’s Quality System Regulation and other applicable requirements, our manufacturing or processing operations could be disrupted, our sales and profitability could suffer, and we may become subject to a wide variety of FDA enforcement actions.

 

We are subject to inspection and marketing surveillance by the FDA to determine our compliance with all regulatory requirements. If the FDA finds that we have failed to comply with any regulatory requirements, it can institute a wide variety of enforcement actions.

 

24

 

We and some of our suppliers must comply with the FDA’s Quality System Regulation, which governs the methods used in, and the facilities and controls used for, the design, testing, manufacture, control, quality assurance, installation, servicing, labeling, packaging, storage, and shipping of medical devices. Our Fox River Grove operations must comply with the FDA’s current Good Tissue Practices, which are the FDA regulatory requirements for the processing of human tissue. The FDA enforces its regulations through pre-announced and unannounced inspections. We have been, and anticipate in the future being, subject to such inspections by the FDA and other regulatory bodies. The timing and scope of future audits is unknown and it is possible, despite our belief that our quality systems and the operation of our manufacturing facilities will remain in compliance with U.S, and non-U.S. regulatory requirements, that a future audit may result in one or more unsatisfactory results. If we or one of our suppliers fails an inspection, or if a corrective action plan adopted by us or one of our suppliers is not sufficient, the FDA may bring an enforcement action against us, and our operations could be disrupted and our manufacturing delayed.

 

We are also subject to the FDA’s general prohibition against promoting our products for unapproved or off-label uses and to the medical device reporting regulations that require us to report to the FDA if our products may have caused or contributed to a death or serious injury, or if our device malfunctions and a recurrence of the malfunction would likely result in a death or serious injury. We must also file reports with the FDA of some device corrections and removals, and we must adhere to the FDA’s rules on labeling and promotion. If we fail to comply with these or other FDA requirements or fail to take adequate corrective action in response to any significant compliance issue raised by the FDA, the FDA can take significant enforcement actions, which could harm our business, results of operations, and our reputation.

 

In addition, most other countries, such as Japan, require us to comply with manufacturing and quality assurance standards for medical devices that are similar to those in force in the United States before marketing and selling our products in those countries. If we fail to comply, we would lose our ability to market and sell our products in those foreign countries.

 

Even after our products have received marketing approval or clearance, our products and the tissue we process may be subject to product recalls. Licenses, registrations, approvals and clearances could be withdrawn or suspended due to failure to comply with regulatory standards or the occurrence of unforeseen problems following initial approval.

 

Our products, services, marketing, sales and development activities, and manufacturing processes are subject to extensive and rigorous regulation by the FDA, by comparable agencies in foreign countries, and by other regulatory agencies and governing bodies. These authorities have been increasing their scrutiny of our industry. If those regulatory bodies feel that we have failed to comply with regulatory standards or if we encounter unforeseen problems following initial approval, licensure or registration, there can be no assurance that any approval, licensure or registration will not be subsequently withdrawn, suspended or conditioned upon extensive post-market study requirements, even after having received marketing approval or clearance or licenses and registrations. Further, due to the increased scrutiny of our industry by the various regulatory agencies and the interconnectedness of the various regulatory agencies, particularly within the EU, there is also no assurance that withdrawal or suspension of any of our approvals, licenses or registrations by any single regulatory agency will not precipitate one or more additional regulatory agencies from also withdrawing or suspending their approval, license or registration.

 

In the event that any of our products proves to be defective, we can voluntarily recall, or the FDA or foreign equivalent could require us to implement a recall of or prohibit the sale of, any of our products. For example, in 2016 and in early 2017, we voluntarily recalled certain lots of our LeMaitre valvulotome due to an issue with the product’s closure mechanism.  In February 2017, we voluntarily recalled certain lots of our Reddick cholangiogram catheter due to a labeling issue. While we took corrective actions to address these issues, there can be no assurance that there will not be a recurrence or that other problems related to our products will not develop in the future. And though the aggregate cost of these recalls to us was only $0.2 million, recalls could result in significant costs to us and significant adverse publicity, which could harm our ability to market our products in the future.

 

With respect to our RestoreFlow allografts, we may voluntarily recall tissue, and in the event of non-compliance with the regulations governing human tissue, the FDA may issue a warning letter, order the recall and/or destruction of tissues and/or order the suspension or cessation of processing and preservation of new tissues.

 

Additionally, if someone is harmed by a malfunction or a product defect, we may experience product liability claims for such defects. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital and may harm our reputation and financial results. Future recalls or claims could also result in significant costs to us and significant adverse publicity, which could harm our ability to market our products in the future.

 

Domestic and foreign legislative or administrative reforms resulting in restrictive reimbursement practices of third-party payors and cost containment measures could decrease the demand for products purchased by our customers, the prices that our customers are willing to pay for those products and the number of procedures using our devices.

 

Our products and our tissue preservation services are purchased principally by hospitals or physicians which typically bill various third-party payors, such as governmental programs (e.g., Medicare, Medicaid and comparable foreign programs), private insurance plans and managed care plans, for the healthcare services provided to their patients. The ability of our customers to obtain appropriate reimbursement for products and services from third-party payors is critical to the success of our products and services because it affects which products customers purchase and the prices they are willing to pay. Reimbursement varies by country and can significantly impact the acceptance of new technology. Implementation of healthcare reforms in the United States and in significant overseas markets such as Germany, Japan, France and other countries may limit, reduce or eliminate reimbursement for our products and services and adversely affect both our pricing flexibility and the demand for our products and services. Even when we develop or acquire a promising new product or service, we may find limited demand for the product or service unless reimbursement approval is obtained from private and governmental third-party payors.

 

25

 

Major third-party payors for hospital services in the United States and abroad continue to work to contain healthcare costs through, among other things, the introduction of cost containment incentives and closer scrutiny of healthcare expenditures by both private health insurers and employers. For example, in an effort to decrease costs, certain hospitals and other customers may resterilize our products intended for a single use or purchase reprocessed products from third-party reprocessors in lieu of purchasing new products from us.

 

Further legislative or administrative reforms to the reimbursement systems in the United States and abroad, or adverse decisions relating to our products by administrators of these systems in coverage or reimbursement, could significantly reduce reimbursement for procedures using our medical devices or result in the denial of coverage for those procedures. Examples of these reforms or adverse decisions include price regulation, competitive pricing, coverage and payment policies, comparative effectiveness of therapies, technology assessments and managed-care arrangements. Any of such reforms or adverse decisions resulting in restrictive reimbursement practices or denials of coverage could have an adverse impact on the acceptance of our products and the prices that our customers are willing to pay for them.

 

Risks Related to Intellectual Property

 

If we fail to adequately protect our intellectual property rights, or prevent use of our intellectual property by third parties, we could lose a significant competitive advantage and our business may suffer.

 

Our success depends in part on obtaining, maintaining, and enforcing our intellectual property rights, trademarks, and other proprietary rights, and our ability to avoid infringing on the proprietary rights of others. We take precautionary steps to protect our technological advantages and intellectual property. We rely upon patent, trade secret, copyright, know-how, and trademark laws, as well as license agreements and contractual provisions, to establish our intellectual property rights and protect our products. These measures may only afford limited protection and may not:

 

 

prevent our competitors from duplicating our products or services;

 

 

prevent our competitors from gaining access to our proprietary information and technology; or

 

 

permit us to gain or maintain a competitive advantage.

 

 

The issuance of a patent is not conclusive as to its validity or enforceability. Any patents we have obtained or will obtain in the future might also be invalidated or circumvented by third parties. In addition, any pending patent applications may not issue as patents or, if issued, may not provide commercially meaningful protection, as competitors may be able to design around our patents to produce alternative, non-infringing designs. Should such challenges to our patents be successful, competitors might be able to market products and use manufacturing processes that are substantially similar to ours. Furthermore, patents expire after a certain duration, depending on the jurisdiction in which issued. To the extent any manufacturers are successful in challenging our patents or they enter the market following the expiration of our patents, this could have an adverse impact on our business and harm our sales and operating results.

 

Additionally, we may not be able to effectively protect our rights in unpatented technology, trade secrets, and confidential information. We have a policy of requiring key employees and consultants and corporate partners with access to trade secrets or other confidential information to execute confidentiality agreements. Our confidentiality agreements also require our employees to assign to us all rights to any inventions made or conceived during their employment with us. We also generally require our consultants to assign to us any inventions made during the course of their engagement by us. There can be no assurance, however, that these agreements will provide meaningful protection or adequate remedies for us in the event of unauthorized use, transfer, or disclosure of confidential information or inventions.

 

In addition, the laws of foreign countries may not protect our intellectual property rights effectively or to the same extent as the laws of the United States. If our intellectual property rights are not adequately protected, we may not be able to commercialize our technologies, products, or services and our competitors could commercialize similar technologies, which could result in a decrease in our sales and market share.

 

26

 

If third parties claim that we infringe upon their intellectual property rights, we may incur liabilities and costs, and we may have to redesign or discontinue selling the affected product.

 

The medical device industry is litigious with respect to patents and other intellectual property rights. Companies operating in our industry routinely seek patent protection for their product designs, and many of our principal competitors have large patent portfolios. Companies in the medical device industry have used intellectual property litigation to gain a competitive advantage. Whether a product infringes a patent or other intellectual property rights involves complex legal and factual issues, the determination of which is often uncertain. We face the risk of claims that we have infringed on third parties’ intellectual property rights, and we cannot assure you that our products or methods do not infringe the patents or other intellectual property rights of third parties. Our efforts to identify and avoid infringing on third parties’ intellectual property rights may not always be successful. Any claims of patent or other intellectual property infringement, even those without merit, could:

 

 

be expensive and time consuming to defend;

 

 

result in us being required to pay significant damages to third parties for past use of the asserted intellectual property;

 

 

harm our reputation;

 

 

cause us to cease making or selling products that incorporate the challenged intellectual property;

 

 

require us to redesign, reengineer, or rebrand our products, which may not be possible and could be costly and time consuming if it is possible to do so at all;

 

 

require us to enter into royalty or licensing agreements in order to obtain the right to use a third party’s intellectual property, which agreements may not be available on terms acceptable to us or at all;

 

 

divert the attention of our management and key personnel from other tasks important to the success of our business; or

 

 

result in our customers or potential customers deferring or limiting their purchase or use of the affected products until resolution of the litigation.

 

 

It is also possible that a third party could claim that our manufacturing process violates an existing patent or other intellectual property rights. If we were unsuccessful in defending such a claim, we may be forced to stop production at one or more of our manufacturing facilities.

 

In addition, new patents obtained by our competitors could threaten a product’s continued life in the market even after it has already been introduced. If our business is successful, the possibility may increase that others will assert infringement claims against us.

 

If we believe our product is or may be the subject of a patent or other intellectual property rights of a third party, we may attempt to reach a license agreement with them to manufacture, market, and sell these products. If we fail to reach an agreement, we could be required to pay significant damages to third parties for past use of the asserted intellectual property and may be forced to cease making or selling products that incorporate the challenged intellectual property.

 

In addition, we may become subject to interference proceedings conducted in the United States Patent Office or opposition proceedings conducted in foreign patent offices challenging the priority of invention or the validity of our patents.

 

Risks Related to Our Common Stock

 

Our stock price may be volatile, and an investment in our common stock could suffer a decline in value.

 

There can be significant volatility in the market price and trading volume of equity securities that is unrelated to the financial performance of the companies issuing the securities. These broad market fluctuations may negatively affect the market price of our common stock. Shareholders may not be able to resell their shares at or above the price at which they purchased them due to fluctuations in the market price of our common stock caused by changes in our operating performance or prospects, a reduced volume of trading in our common stock, and other factors.

 

Some factors that may have a significant effect on our common stock market price include:

 

 

actual or anticipated fluctuations in our operating results or future prospects;

 

 

our announcements or our competitors’ announcements of new products;

 

 

public concern as to the safety or efficacy of our products and services;

 

 

the public’s reaction to our press releases, our other public announcements, and our filings with the SEC;

 

 

our determination whether or not to continue the payment of quarterly cash dividends;

 

 

our determination whether or not to undertake or continue a share repurchase program;

 

27

 

 

strategic actions by us or our competitors, such as acquisitions, divestitures or restructurings;

 

 

dilutive issuances of additional securities;

 

 

changes in our growth rates or our competitors’ growth rates;

 

 

developments regarding our patents or proprietary rights or those of our competitors;

 

 

our inability to raise additional capital;

 

 

new laws or regulations or new interpretations of existing laws or regulations applicable to our business;

 

 

 

the discontinuation of a product line or other revenue generating activity;

 

 

adverse regulatory actions which may necessitate recalls of our products or services or warning letters that negatively affect the markets for our products or services;

 

 

sales of common stock by us or our directors, officers, or principal stockholders;

 

 

control by our affiliates and insiders of a significant percentage of our common stock;

 

 

changes in stock market analyst recommendations or earnings estimates regarding our common stock, comparable companies, or our industry generally;

 

 

reduced or lower volume of trading in our common stock; and

 

 

our inclusion in or removal from stock market indices, such as the S&P 600 or Russell 2000.

 

 

In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been brought. This litigation, if brought against us, could result in substantial costs and a diversion of our management’s attention and resources.

 

Our chief executive officer has significant voting power and may take actions that may not align with the interests of our other stockholders.

 

Our chief executive officer and the LeMaitre Family LLC collectively control approximately 17% of our outstanding common stock as of December 31, 2018. As a result, these stockholders, if they were to act together, could have significant influence on many matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. This concentration of ownership may have the effect of delaying or preventing a change in control, might adversely affect the market price of our common stock, and may not be fully aligned with the interests of other stockholders.

 

We have not established a minimum dividend payment level for our common stockholders and there are no assurances of our ability to pay dividends to common stockholders in the future.

 

In February 2011, our Board of Directors adopted a quarterly dividend program for the purpose of returning capital to our stockholders. However, we have not established a minimum dividend payment level for our common stockholders and our ability to pay dividends may be harmed by the risks and uncertainties described in this Annual Report on Form 10-K and in the other documents we file from time to time with the SEC. Future dividends, if any, will be authorized by our Board of Directors and declared by us based upon a variety of factors deemed relevant by our directors, including, among other things, our financial condition, liquidity, earnings projections and business prospects. In addition, financial covenants in any credit facility to which we become a party may restrict our ability to pay future quarterly dividends. We can provide no assurance of our ability to pay dividends in the future.

 

Item 1B.

Unresolved Staff Comments

 

None.

 

 

Item 2.

Properties

 

Our principal worldwide executive, distribution, and manufacturing operations are located at three adjacent 27,098 square foot, 27,289 square foot and 15,642 square foot leased facilities, as well as a fourth nearby 12,878 square foot leased facility, in Burlington, Massachusetts. Each of our Burlington leases expires in December 2023. In addition, our international operations are headquartered at a 13,948 square foot leased facility located in Sulzbach, Germany, with a lease which expires in 2023. We also own a 6,140 square foot manufacturing facility in North Melbourne, Australia, a 6,824 square foot facility in Saint-Etienne, France and lease an 8,732 square foot processing and distribution facility in Fox River Gove, Illinois. In addition, we have smaller leased sales and marketing offices located in Canada, China, Italy, Japan, Spain and Singapore. Based on our current operating plans, we believe our current facilities are adequate for our needs.

 

28

 

 

Item 3.

Legal Proceedings

 

In the ordinary course of business, we are from time to time involved in lawsuits, claims, investigations, proceedings, and threats of litigation consisting of intellectual property, commercial, employment, and other matters. While the outcome of these proceedings and claims cannot be predicted with certainty, there are no matters, as of December 31, 2018, that, in the opinion of management, would be reasonably expected to have a material adverse effect on our financial position, results of operations or cash flows.

 

Item 4.

Mine Safety Disclosures

 

Not applicable.

 

29

 

 

PART II

 

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Market Information

 

Our common stock is publicly traded on The Nasdaq Global Market under the symbol “LMAT”. Prior to our initial public offering on October 19, 2006, there was no public trading market for our common stock.

 

Holders of Record

 

On March 1, 2019, the closing price per share of our common stock was $30.63 as reported on The Nasdaq Global Market, and we had approximately 169 stockholders of record. In addition, we believe that a significant number of beneficial owners of our common stock hold their shares in street name.

 

 

Stock Price Performance Graph 

 

Set forth below is a graph comparing the cumulative total stockholder return on LeMaitre’s common stock with the Nasdaq US Composite Index, the Nasdaq Medical Equipment Index and a peer group for the period covering from December 31, 2013, through the end of LeMaitre’s fiscal year ended December 31, 2018. The graph assumes an investment of $100.00 made on December 31, 2013, in (i) LeMaitre’s common stock, (ii) the stocks comprising the Nasdaq US Composite Index, (iii) the stocks comprising the Nasdaq Medical Equipment Index and (iv) the stocks comprising our peer groups. This graph is not “soliciting material,” is not deemed “filed” with the SEC and is not to be incorporated by reference into any filing of LeMaitre under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date hereof and irrespective of any general incorporation language in any such filing.

 

   

12/13

   

12/14

   

12/15

   

12/16

   

12/17

   

12/18

 
                                                 

LeMaitre Vascular, Inc

    100.00       97.28       222.56       330.49       418.33       313.21  

NASDAQ Composite

    100.00       114.62       122.81       133.19       172.11       165.84  

NASDAQ Medical Equipment

    100.00       117.22       131.48       138.45       195.37       221.45  

2017 Peer Group

    100.00       93.98       59.48       71.64       85.84       103.65  

2018 Peer Group

    100.00       96.94       69.98       87.21       112.27       138.15  

 

30

 

LeMaitre’s fiscal year ends on the last day of December each year; data in the above table reflects market values for our stock and Nasdaq and peer group indices as of the close of trading on the last trading day of year presented.

 

 

The 2017 peer group includes the following companies: AngioDynamics, Inc., Avinger, Inc., Cardiovascular Systems Inc., Cryolife Inc., Endologix, Inc., Penumbra, Inc., and Vascular Solutions, Inc.

 

The 2018 peer group includes the following companies: AngioDynamics, Inc., Cardiovascular Systems Inc., Cryolife Inc., Endologix, Inc., Merit Medical Systems, Inc., and Penumbra, Inc. This new peer group differs from our old peer group. Specifically, we removed Avinger, Inc. as the company has been experiencing adverse operating results, we removed Vascular Solutions, Inc. because it was acquired by another company and we added Merit Medical Systems, Inc., as the company competes primarily in the open vascular and interventional radiology segments.

 

 

Recent Sales of Unregistered Securities

 

Not Applicable.

 

 

 

Issuer Purchases of Equity Securities

 

   

Issuer Purchases of Equity Securities

 
                           

Maximum Number

 
                           

(or Approximate

 
                   

Total Number of

   

Dollar Value) of

 
                   

Shares (or Units)

   

Shares (or Units)

 
   

Total

   

Average

   

Purchased as

   

that may yet be

 
   

Number of

   

Price

   

Part of Publicly

   

Purchased under

 

 

 

Shares (or Units)

   

Paid Per

   

Announced Plans

   

the Plans or

 
Period   

Purchased (1)

   

Share (or Unit)

   

or Program

   

Program

 
                                 

October 1, 2018 through October 31, 2018

    86     $ 27.94       N/A       N/A  

November 1, 2018 through November 30, 2018

    -     $ -       N/A       N/A  

December 1, 2018 through December 31, 2018

    2,685     $ 22.23       N/A       N/A  
                                 

Total

    2,771     $ 22.41       N/A       N/A  

 

(1)

For the three months ended December 30, 2018, we repurchased 2,771 shares of our common stock to satisfy employees’ obligations with respect to minimum statutory withholding taxes in connection with the vesting of restricted stock units.

 

31

 

Item 6.

Selected Financial Data

 

You should read the following selected consolidated financial data in conjunction with our consolidated financial statements and the related notes which are included elsewhere in this Annual Report and the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” section of this Annual Report. We have derived the consolidated statement of operations data for the years ended December 31, 2018, 2017 and 2016 and the consolidated balance sheet data as of December 31, 2018 and 2017, from our audited consolidated financial statements, which are included elsewhere in this Annual Report. We have derived the consolidated statement of operations data for the years ended December 31, 2015 and 2014, and the consolidated balance sheet data as of December 31, 2016, 2015 and 2014 from our audited consolidated financial statements, which are not included in this Annual Report. Our historical results for any prior period are not necessarily indicative of results to be expected for any future period.

 

   

Year ended December 31,

 
   

2018

   

2017

   

2016

   

2015

   

2014

 
   

(in thousands, except per share data)

 

Consolidated Statements of Operations Data:

                                       

Net sales

  $ 105,568     $ 100,867     $ 89,151     $ 78,352     $ 71,097  

Cost of sales

    31,629       30,170       26,215       24,186       22,666  

Gross profit

    73,939       70,697       62,936       54,166       48,431  

Operating expenses:

                                       

Sales and marketing

    27,318       25,948       26,105       22,780       22,087  

General and administrative

    17,689       17,010       14,354       14,010       13,889  

Research and development

    8,197       6,636       6,141       5,479       4,671  

Medical device excise tax

    -       -       -       744       689  

Restructuring charges

    -       -       -       -       526  

Gain on divestitures and acquisitions

    (7,474 )     -       -       (360 )     -  

Impairment charges

    -       -       -       -       229  

Total operating expenses

    45,730       49,594       46,600       42,653       42,091  

Income from operations

    28,209       21,103       16,336       11,513       6,340  

Other income (expense):

                                       

Interest income

    631       179       81       13       1  

Interest expense

    (2 )     (21 )     (14 )     -       (5 )

Foreign currency gain (loss)

    (394 )     (155 )     (161 )     (102 )     (16 )

Total other income (loss)

    235       3       (94 )     (89 )     (20 )

Income before income tax

    28,444       21,106       16,242       11,424       6,320  

Provision for income taxes

    5,501       3,929       5,652       3,666       2,405  

Net income

  $ 22,943     $ 17,177     $ 10,590     $ 7,758     $ 3,915  

Earnings per share of common stock:

                                       

Basic

  $ 1.18     $ 0.91     $ 0.57     $ 0.44     $ 0.24  

Diluted

  $ 1.13     $ 0.86     $ 0.55     $ 0.42     $ 0.23  

Weighted-average shares outstanding:

                                       

Basic

    19,426       18,961       18,485       17,764       16,614  

Diluted

    20,242       20,033       19,241       18,316       17,008  

Cash dividends declared per common share

  $ 0.28     $ 0.22     $ 0.18     $ 0.16     $ 0.14  

 

32

 

   

Year ended December 31,

 
   

2018

   

2017

   

2016

   

2015

   

2014

 
   

(in thousands)

 

Consolidated Balance Sheet Data:

                                       

Cash and cash equivalents

  $ 26,318     $ 19,096     $ 24,288     $ 27,451     $ 18,692  

Short-term marketable securities

    21,668       22,564       -       -       -  

Current assets

    94,017       80,311       59,027       58,184       48,588  

Total assets

    153,088       126,323       101,924       90,704       81,492  

Current liabilities

    19,758       13,189       10,482       10,368       10,041  

Long-term liabilities

    3,095       3,364       3,942       2,452       3,244  

Total liabilities

    22,853       16,553       14,424       12,820       13,285  

Total stockholders’ equity

    130,235       109,770       87,500       77,884       68,207  

 

 

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion should be read in conjunction with our consolidated financial statements and the related notes contained elsewhere in this Annual Report on Form 10-K and in our other Securities and Exchange Commission filings. The following discussion may contain predictions, estimates, and other forward-looking statements that involve a number of risks and uncertainties, including those discussed under “Risk Factors” and elsewhere in this Annual Report on Form 10-K. These risks could cause our actual results to differ materially from any future performance suggested below.

 

Overview

 

We are a medical device company that develops, manufactures, and markets medical devices and implants for the treatment of peripheral vascular disease. We also provide processing and cryopreservation services of human tissue for implantation into patients. Our principal product offerings are sold throughout the world, primarily in the United States, Europe and, to a lesser extent, Asia and the Pacific Rim. We estimate that the annual worldwide market for all peripheral vascular devices exceeds $5 billion, within which our core product lines address roughly $900 million. We have grown our business using a three-pronged strategy: 1) pursuing a focused call point, 2) competing for sales of low-rivalry niche products, and 3) expanding our worldwide direct sales force while acquiring and developing complementary vascular devices. We have used acquisitions as a primary means of further accessing the peripheral vascular device market, and we expect to continue to pursue this strategy in the future. Additionally, we have increased our efforts to expand our vascular device offerings through new product development. We currently manufacture most of our product lines in our Burlington, Massachusetts headquarters.

 

Our products are used primarily by vascular surgeons who treat peripheral vascular disease through both open surgery and endovascular techniques. In contrast to interventional cardiologists and interventional radiologists, neither of whom are certified to perform open surgical procedures, vascular surgeons can perform both open surgery and minimally invasive endovascular procedures, and are therefore uniquely positioned to provide a wider range of treatment options to patients.

 

Our principal product lines include the following: valvulotomes, biologic vascular patches, carotid shunts, balloon catheters, biologic vascular grafts, anastomotic clips, radiopaque marking tape, powered phlebectomy devices, prosthetic vascular grafts, surgical glue and remote endarterectomy devices. Through our RestoreFlow allografts business we also provide services related to the processing and cryopreservation of human vascular tissue.

 

To assist us in evaluating our business strategies, we regularly monitor long-term technology trends in the peripheral vascular device market. Additionally, we consider the information obtained from discussions with the medical community in connection with the demand for our products, including potential new product launches. We also use this information to help determine our competitive position in the peripheral vascular device market and our manufacturing capacity requirements.

 

 

Our business opportunities include the following:

 

 

the long-term growth of our direct sales force in North America, Europe, Asia and the Pacific Rim;

 

 

the addition of complementary products through acquisitions;

 

 

the introduction of our products in new territories upon receipt of regulatory approvals or registrations in these territories;

 

 

the updating of existing products and introduction of new products through research and development; and

 

 

the consolidation of product manufacturing into our Burlington, Massachusetts corporate headquarters.

 

33

 

We sell our products and services primarily through a direct sales force. As of December 31, 2018 our sales force was comprised of 108 sales representatives in North America, Europe, Japan, China, Australia and New Zealand, including one export manager. We also sell our products in other countries through distributors. Our worldwide headquarters and principal manufacturing site is located in Burlington, Massachusetts. Our European operations are headquartered in Sulzbach, Germany and our Asia Pacific operations are headquartered in Singapore. We also have sales offices located in Tokyo, Japan; Vaughan, Canada; Madrid, Spain; Milan, Italy; Shanghai, China; and North Melbourne, Australia, and we have a processing facility in Fox River Grove, Illinois and manufacturing facilities in North Melbourne, Australia and Saint-Etienne, France. During the years ended December 31, 2018 and 2017, approximately 95% and 93%, respectively, of our net sales were generated in territories in which we employ direct sales representatives.

 

Historically we have experienced success in lower-rivalry niche product segments, for example the markets for valvulotome devices and biologic vascular patches. More recently, however, we have faced increased competition in the biologic vascular patch segment, which has inhibited our ability to continue to increase market share or to implement selling price increases.

 

In the valvulotome market, our highly differentiated devices have historically allowed us to increase our selling prices while maintaining our unit market share. In contrast, we have experienced less success in highly competitive markets such as our ProCol biologic graft product line, where we face strong competition from larger companies with greater resources. While we believe that these challenging market dynamics can be mitigated by our relationships with vascular surgeons, there can be no assurance that we will be successful in these highly competitive markets.

 

In recent years we have also experienced success in international markets, such as Europe, where we sometimes offer comparatively lower average selling prices. If we continue to seek growth opportunities outside of North America, we may experience downward pressure on our gross margin.

 

Because we believe that direct-to-hospital sales engender closer customer relationships, and allow for higher selling prices and gross margins, we periodically enter into transactions with our distributors to transition their sales of our medical devices towards our direct sales organization:

 

 

In December 2015, we signed a master distribution agreement with Meheco Yonstron Pharmaceutical Co. Ltd. (Meheco), a Chinese distribution and logistics company, and began selling our Chinese market products to Meheco in 2016. Meheco then sold our products to multiple sub-distributors who then sold to Chinese hospitals. This agreement expired in December 2017, and we are currently in the process of signing distribution agreements with sub-distributors and have begun selling our products to sub-distributors in China. We repurchased $120,000 of our products back from Meheco in the three months ended September 30, 2018, which resulted in a corresponding revenue reversal.

 

 

In March 2018, we terminated our master distribution agreement with Sinopharm United Medical Device Co., Ltd. under which we sold our powered phlebectomy device and related disposable devices for distribution in China. In April 2018 we began selling these products to sub-distributors in China.

 

 

During 2018, we entered into definitive agreements with several former Applied Medical and Cardial distributors in Europe and Asia in order to terminate their distribution of our recently acquired catheter, polyester graft and valvulotome products, and we began selling direct-to-hospitals in those geographies. The termination fees totaled approximately $0.1 million.

 

 

We anticipate that the expansion of our sales organization in China will result in increased sales, marketing and regulatory expenses during 2019. As of December 31, 2018 we had eight employees in China.

 

Our strategy for growing our business includes the acquisition of complementary product lines and companies and occasionally the discontinuance or divestiture of products or activities that are no longer complementary:

 

 

In March 2016, we acquired substantially all of the assets as well as the production and distribution rights of the ProCol business from Hancock Jaffe Laboratories and CryoLife, Inc. for $2.7 million plus 10% of net sales for three years following the closing. ProCol is a biologic vascular graft used for dialysis access and is approved for sale in the United States.

 

 

In November 2016, we acquired substantially all of the assets related to the peripheral vascular allograft operations of Restore Flow Allografts, LLC for $12.0 million plus additional payments of up to $6.0 million depending upon the satisfaction of certain contingencies.

 

34

 

 

In April 2018, we sold our Reddick cholangiogram catheter and Reddick-Saye screw product lines to Specialty Surgical Instrumentation, Inc. for $7.4 million.

 

 

In September 2018, we acquired the assets of the embolectomy catheter business from Applied Medical Resources Corporation for $14.2 million. We have initiated a project to transfer the manufacturing of the acquired devices to our Burlington facility. We expect this transition to be completed in 2019.

 

 

In October 2018, we acquired the assets of Cardial, a subsidiary of Becton, Dickinson & Company, located in Saint-Etienne, France, for €2.0 million. Cardial’s product lines include knitted and woven vascular grafts, valvulotomes and surgical glue.

 

In addition to relying upon acquisitions for growth, we also rely on our product development efforts to bring differentiated technology and next-generation products to market:

 

 

In 2016, we launched additional sizes of our XenoSure patch.

 

 

In 2016, we launched the 7.0mm diameter size Omniflow graft.

 

 

In 2017, we launched XenoSure biologic pledgets.

 

 

In 2017, we launched a new iteration of our anastoclip AC closure system intended for use in neurosurgery applications.

 

 

In 2018, we expanded the indications for our Anastoclip GC closure system in the United States to include dura tissue repair.

 

In addition to our sales growth strategies, we have also executed several operational initiatives designed to consolidate and streamline manufacturing within our Burlington, Massachusetts facilities. We expect these plant consolidations will result in improved control over our production capacity as well as reduced costs over the long-term. Our most recent manufacturing transitions included:

 

 

In 2016, we initiated a project to transfer the manufacturing of the ProCol biologic product line to our facility in Burlington. This transition was completed in 2018.

 

 

In 2017, we renovated our manufacturing facility in Burlington, in which many of our biologic offerings, including the XenoSure patch as well as our ProCol biologic grafts, are currently produced or processed. The cost of the facility renovation was approximately $3.0 million. We are currently in the process of further expanding this clean room, which we expect to complete during 2019 at a cost of approximately $0.8 million.

 

 

In September 2018, we acquired the embolectomy catheter business assets from Applied Medical Resources Corporation. We have initiated a project to transfer the manufacturing of the acquired devices to our Burlington facility. We expect this transition to be completed in 2019.

 

Our execution of these business opportunities may affect the comparability of our financial results from period to period and may cause substantial fluctuations from period to period as we incur related process engineering and other charges, as well as longer term impacts to revenues and operating expenditures.

 

Fluctuations in the rate of exchange between the U.S. dollar and foreign currencies, primarily the Euro, affect our financial results. For the year ended December 31, 2018, approximately 44% of our sales took place outside the United States, and in most cases in currencies other than the U.S. dollar. We expect that foreign currencies will continue to represent a significant percentage of our sales in the future. Selling, marketing, and administrative costs related to these sales are largely denominated in the same respective currency, thereby partially mitigating our exposure to exchange rate fluctuations. However, as most of our foreign sales are denominated in local currency, if there is an increase in the rate at which a foreign currency is exchanged for U.S. dollars, it will require more of the foreign currency to equal a specified amount of U.S. dollars than before the rate increase. In such cases we will receive less revenue in U.S. dollars than we did before the rate increase went into effect. For the year ended December 31, 2018, we estimate that the effects of changes in foreign exchange rates increased sales by approximately $1.4 million, as compared to rates in effect for the year ended December 31, 2017.

 

Net Sales and Expense Components

 

The following is a description of the primary components of our net sales and expenses:

 

Net sales. We derive our net sales from the sale of our products and services, less discounts and returns. Net sales include the shipping and handling fees paid for by our customers. Most of our sales are generated by our direct sales force and are shipped and billed to hospitals or clinics throughout the world. In countries where we do not have a direct sales force, sales are primarily to distributors, who in turn sell to hospitals and clinics. In certain cases our products are held on consignment at a hospital or clinic prior to purchase; in those instances we recognize revenue at the time the product is used in surgery rather than at shipment.

 

35

 

Cost of sales. We manufacture the majority of the products that we sell. Our cost of sales consists primarily of manufacturing personnel, raw materials and components, depreciation of property and equipment, and other allocated manufacturing overhead, as well as freight expense we pay to ship products to customers.

 

Sales and marketing. Our sales and marketing expense consists primarily of salaries, commissions, stock based compensation, travel and entertainment, attendance at vascular congresses, training programs, advertising and product promotions, direct mail and other marketing costs.

 

General and administrative. General and administrative expense consists primarily of executive, finance and human resource salaries, stock based compensation, legal and accounting fees, information technology expense, intangible asset amortization expense and insurance expense.

 

Research and development. Research and development expense includes costs associated with the design, development, testing, enhancement and regulatory approval of our products, principally salaries, laboratory testing and supply costs. It also includes costs associated with design and execution of clinical studies, regulatory submissions and costs to register, maintain, and defend our intellectual property, and royalty payments associated with licensed and acquired intellectual property.

 

Other income (expense). Other income (expense) primarily includes interest income and expense, foreign currency gains (losses), and other miscellaneous gains (losses).

 

Income tax expense. We are subject to federal and state income taxes for earnings generated in the United States, which include operating losses or profits in certain foreign jurisdictions for certain years depending on tax elections made, and foreign taxes on earnings of our wholly-owned foreign subsidiaries. Our consolidated tax expense is affected by the mix of our taxable income (loss) in the United States and foreign subsidiaries, permanent items, discrete items, unrecognized tax benefits, and amortization of goodwill for U.S tax reporting purposes.

 

Results of Operations

 

Comparison of the year ended December 31, 2018 to the year ended December 31, 2017

 

The following tables set forth, for the periods indicated, our results of operations and the change between the specified periods expressed as a percentage increase or decrease:  

 

                           

Percent

 
   

2018

   

2017

   

$ Change

   

change

 
   

($ in thousands)

 

Net sales

  $ 105,568     $ 100,867     $ 4,701       5 %
                                 

Net sales by geography:

                               

Americas

  $ 63,649     $ 62,696     $ 953       2 %

Europe, Middle East and Africa

  $ 35,319     $ 32,516     $ 2,803       9 %

Asai/Pacific Rim

    6,600       5,655       945       17 %

Total

  $ 105,568     $ 100,867     $ 4,701       5 %

 

 

Net sales. Net sales increased 5% or $4.7 million to $105.6 million for the year ended December 31, 2018, compared to $100.9 million for the year ended December 31, 2017. Sales increases were primarily driven by increased sales of our biologic vascular patches of $1.7 million, carotid shunts of $1.2 million, embolectomy catheters of $1.2 million, of which $0.8 million was from our recent acquisition of Syntel and Python products, and valvulotomes of $0.6 million. We also had an increase in human tissue cryopreservation service revenues from our RestoreFlow allograft business of $1.2 million. These and other product line increases were partially offset by decreased sales due to the divestiture of our Reddick cholangiogram catheter product in early Q2 2018 of $1.1 million and decreased sales of our closure systems of $0.7 million.

 

Direct-to-hospital net sales were 95% for the year ended December 31, 2018 and 93% for the year ended December 31, 2017.

 

Net sales by geography. Net sales in the Americas increased $1.0 million for the year ended December 31, 2018. The increase was primarily driven by increased human tissue cryopreservation services of $1.2 million related to our RestoreFlow allograft business. We also had increased sales of embolectomy catheters of $0.7 million, in part due to our acquisition of the Syntel and Python products, as well as increased sales of valvulotomes, carotid shunts and biologic vascular patches of $0.5 million each. These increases were partially offset by decreases in sales associated with the divestiture of the Reddick product line of $1.2 million, as well as lower sales of radiopaque tape of $0.5 million and closure systems of $0.4 million.

 

36

 

Europe, Middle East and Africa net sales increased $2.8 million for the year ended December 31, 2018. The increase was primarily driven by increased sales of our biologic vascular patches of $1.1 million, polyester grafts of $0.4 million, embolectomy catheters of $0.3 million and carotid shunts of $0.2 million. We also had sales of surgical glue of $0.6 million in connection with our recent Cardial acquisition.

 

Asia/Pacific Rim net sales increased $0.9 million for the year ended December 31, 2018. The increase was primarily driven by increased sales of carotid shunts of $0.5 million, and embolectomy and occlusion catheters of $0.2 million each, and valvulotomes of $0.1 million each. These increases were offset in part by decreased sales of closure systems to China.

 

                           

Percent

 
   

2018

   

2017

   

Change

   

change

 
   

($ in thousands)

 

Gross profit

  $ 73,939     $ 70,697     $ 3,242       5 %

Gross margin

    70.0 %     70.1 %     (0.1% )     *  

 

* Not applicable

 

 

Gross Profit. Gross profit increased $3.2 million to $73.9 million for the year ended December 31, 2018, while gross margin decreased by 10 basis points to 70.0% in the period. The gross margin was favorably impacted by higher average selling prices across most product lines, a more favorable product mix, including increased sales of our biologic patch products, and the favorable impact from changes in foreign exchange rates. These increases were offset, however, by manufacturing inefficiencies as well as higher manufacturing overhead costs experienced for certain of our product lines.

 

                           

Percent

   

2018 as a %

   

2017 as a %

 
   

2018

   

2017

   

$ change

   

change

   

of Net Sales

   

of Net Sales

 
   

($ in thousands)

 

Sales and marketing

  $ 27,318     $ 25,948     $ 1,370       5 %     26 %     26 %

General and administrative

    17,689       17,010       679       4 %     17 %     17 %

Research and development

    8,197       6,636       1,561       24 %     8 %     7 %

Gain on divestures and acquisitions

    (7,474 )     -       (7,474 )     *       (7 %)     *  
    $ 45,730     $ 49,594     $ (3,864 )     (8 %)     43 %     49 %

 

 * Not a meaningful percentage. 

 

 

Sales and marketing. For the year ended December 31, 2018, sales and marketing expense increased $1.4 million, or 5%, to $27.3 million. The increase was primarily driven by higher personnel costs, including compensation, recruiting, sales meeting and travel expenses associated with expanding the sales force. As a percentage of net sales, sales and marketing expense was 26% in both 2018 and 2017.

 

General and administrative. For the year ended December 31, 2018, general and administrative expense increased $0.7 million, or 4%, to $17.7 million. General and administrative expense increases were primarily related to compensation costs, professional fees and travel expense, offset in part by lower acquisition-related costs and facilities costs. The compensation expense increase in 2018 was in part due to the January 1, 2018 reinstatement of our Chief Executive Officer’s compensation, which he had forgone (except as to the amount legally required) beginning in June 2017. As a percentage of net sales, general and administrative expense was 17% for both 2018 and 2017.

 

Research and development. For the year ended December 31, 2018, research and development expense increased $1.6 million, or 24%, to $8.2 million. Clinical and regulatory expenses increased $1.0 million and product development expense increased $0.6 million. These increases were primarily related to regulatory submissions for new products in geographies such as China and Japan, testing related to our biologic product offerings and for compliance with new medical device regulation (MDR) requirements in the EU.

 

Gain on divestitures and acquisitions. On April 5, 2018, we entered into an asset purchase agreement with Specialty Surgical Instrumentation, Inc. to sell the inventory, intellectual property and other assets associated with our Reddick cholangiogram catheter and Reddick-Saye screw product lines for $7.4 million. During the three months ended June 30, 2018 we recorded a gain in connection with these agreements of $5.9 million. On October 22, 2018, we entered into an agreement to acquire the assets of Cardial, a subsidiary of Becton Dickinson, whose business consists of the manufacture and sale of knitted and woven vascular grafts, valvulotomes and surgical glue, for a purchase price of €1.2 million ($1.4 million). In connection with this asset purchase, we simultaneously entered into an agreement to purchase Cardial’s land and building for €0.8 million ($0.9 million), bringing the total price paid for the business to €2.0 million ($2.3 million). During the three months ended December 31, 2018 we recorded a gain of €1.4 million ($1.6 million) in connection with these agreements resulting from the excess value of the assets acquired over the purchase price, subject to finalization of the purchase accounting.

 

37

 

 

Other income (expense). Interest income was $0.6 million and $0.2 million, respectively for 2018 and 2017. Foreign exchange losses on settlements or remeasurement of receivables and payables denominated in foreign currencies were $0.4 million and $0.2 million in 2018 and 2017, respectively.   

 

Income tax expense. We recorded a provision for taxes of $5.5 million on pre-tax income of $28.4 million in 2018 as compared to $3.9 million on pre-tax income of $21.1 million in 2017. The 2018 provision was comprised of a federal tax provision in the United States of $2.8 million, a state tax provision of $0.5 million, and a foreign tax provision of $2.2 million. The 2017 provision was comprised of a federal tax provision in the United States of $2.2 million, a state tax provision of $0.7 million and a foreign tax provision of $1.0 million. Our effective tax rate differed from the U.S. statutory tax rate in 2018 principally because of stock option exercises, taxes on foreign earnings, valuation allowances, and certain permanent differences. While it is often difficult to predict the final outcome or timing of the resolution of any particular tax matter, we believe that our tax reserves reflect the probable outcome of known contingencies.

 

We assess the likelihood that our deferred tax assets will be realized through future taxable income and record a valuation allowance to reduce gross deferred tax assets to an amount we believe is more likely than not to be realized. As of December 31, 2018, we have provided a valuation allowance of $1.3 million for deferred tax assets primarily related to Australian net operating loss and capital loss carry forwards and Massachusetts tax credit carry forwards that are not expected to be realized.

 

Refer to Note 8 to our consolidated financial statements for additional information about income tax expense (benefit) including information related to U.S. tax reform legislation.

 

 

Comparison of the year ended December 31, 2017 to the year ended December 31, 2016

 

The following tables set forth, for the periods indicated, our results of operations and the change between the specified periods expressed as a percentage increase or decrease:

 

                           

Percent

 
   

2017

   

2016

   

$ Change

   

change

 
   

($ in thousands)

 

Net sales

  $ 100,867     $ 89,151     $ 11,716       13 %
                                 

Net sales by geography:

                               

Americas

  $ 62,696     $ 53,710     $ 8,986       17 %

International

    38,171       35,441       2,730       8 %

Total

  $ 100,867     $ 89,151     $ 11,716       13 %

 

 

Net sales. Net sales increased 13% or $11.7 million to $100.9 million for the year ended December 31, 2017, compared to $89.2 million for the year ended December 31, 2016. The sales increase was primarily driven by increased sales of our biologic vascular patches of $3.6 million, carotid shunts of $1.0 million, and biologic vascular grafts of $0.8 million. We also had an increase in human tissue cryopreservation service revenues from our RestoreFlow allograft business (acquired in late 2016) of $5.5 million. These and other product line increases were partially offset by decreased sales of powered phlebectomy devices of $0.5 million, radiopaque tape of $0.4 million and ePTFE vascular grafts of $0.4 million.

 

Direct-to-hospital net sales were 93% of our sales in the year ended December 31, 2017 and 92% in the year ended December 31, 2016.

 

38

 

Net sales by geography. Net sales in the Americas increased $9.0 million for the year ended December 31, 2017. The increase was primarily driven by increased human tissue cryopreservation services of $5.5 million related to our RestoreFlow allograft business. We also had increased sales of biologic vascular patches of $2.3 million and carotid shunts of $0.7 million. International net sales increased $2.7 million for the year ended December 31, 2017. The increase was primarily driven by increased sales of our biologic vascular patches of $1.3 million, valvulotomes of $0.7 million and biologic vascular grafts of $0.6 million. These and other product line increases were partially offset by decreased sales of ePTFE vascular grafts of $0.4 million.

 

                           

Percent

 
   

2017

   

2016

   

Change

   

change

 
   

($ in thousands)

 

Gross profit

  $ 70,697     $ 62,936     $ 7,761       12 %
                                 

Gross margin

    70.1 %     70.6 %     (0.5 %)     *  

 

* Not applicable

 

Gross Profit. Gross profit increased $7.8 million to $70.7 million for the year ended December 31, 2017, while gross margin decreased by 50 basis points to 70.1% in the period. The gross margin was favorably impacted by higher average selling prices across most product lines, lower per-unit manufacturing costs of our biologic patches and other products, increased sales of biologic patches, and lower sales to China where average selling prices are comparatively lower. These increases were offset, however, by the introduction of the RestoreFlow product line, as well as higher sales into non-direct markets where we typically realize lower gross margins than in our direct-to-hospital markets. The gross profit increase was a result of higher sales offset slightly by the lower gross margin.

 

                           

Percent

   

2017 as a %

   

2016 as a %

 
   

2017

   

2016

   

$ change

   

change

   

of Net Sales

   

of Net Sales

 
   

($ in thousands)

 

Sales and marketing

  $ 25,948     $ 26,105     $ (157 )     (1% )     26 %     29 %

General and administrative

    17,010       14,354       2,656       19 %     17 %     16 %

Research and development

    6,636       6,141       495       8 %     7 %     7 %
    $ 49,594     $ 46,600     $ 2,994       6 %     49 %     52 %

 

* Not a meaningful percentage.

 

 

Sales and marketing. For the year ended December 31, 2017, sales and marketing expense decreased $0.2 million or 1% to $25.9 million. The decrease was primarily driven by reduced discretionary spending for professional services, sales meetings, trade shows, advertising and product samples, offset in part by increased compensation-related expense. As a percentage of net sales, sales and marketing expense decreased to 26% in 2017 from 29% in 2016.

 

General and administrative. For the year ended December 31, 2017, general and administrative expenses increased $2.7 million or 19%, to $17.0 million. General and administrative expense increases were primarily related to compensation costs, facilities costs and acquisition-related expenses, and to a lesser extent recruiting costs and professional fees. As a percentage of net sales, general and administrative expense increased to 17% for the year ended December 31, 2017 as compared to 16% for the prior period.

 

Research and development. For the year ended December 31, 2017, research and development expenses increased $0.5 million or 8%, to $6.6 million. Clinical and regulatory expenses increased $0.5 million primarily due to compensation costs and professional fees, including costs related to regulatory submissions for new products in geographies such as China. Product development expenses in total were unchanged, with decreases in compensation costs offset by increased product testing.

 

 

Other income (expense). Interest income was $0.2 million and $0.1 million, respectively for 2017 and 2016. Foreign exchange losses for both 2017 and 2016 were $0.2 million.

 

Income tax expense. We recorded a provision for taxes of $3.9 million on pre-tax income of $21.1 million in 2017 as compared to $5.7 million on pre-tax income of $16.2 million in 2016. The 2017 provision was comprised of a Federal tax provision in the United States of $2.2 million, a state tax provision of $0.7 million and a foreign tax provision of $1.0 million. The 2016 provision was comprised of a Federal tax provision in the United States of $4.6 million, a state tax provision of $0.6 million and a foreign tax provision of $0.5 million. Our effective tax rate differed from the U.S. statutory tax rate in 2017 principally because of stock option exercises, U.S. tax reform legislation, deferred tax remeasurement, and certain permanent differences. While it is often difficult to predict the final outcome or timing of the resolution of any particular tax matter, we believe that our tax reserves reflect the probable outcome of known contingencies.

 

We assess the likelihood that our deferred tax assets will be realized through future taxable income and record a valuation allowance to reduce gross deferred tax assets to an amount we believe is more likely than not to be realized. As of December 31, 2017, we have provided a valuation allowance of $2.0 million for deferred tax assets primarily related to an Australian net operating loss and capital loss carry forwards as well as Massachusetts tax credit carry forwards that are not expected to be realized.

 

Refer to Note 8 to our consolidated financial statements for additional information about income tax expense (benefit) including information related to U.S. tax reform legislation.

 

39

 

Liquidity and Capital Resources

 

At December 31, 2018, we held $26.3 million in cash and cash equivalents and $21.7 million in a short-term managed income mutual fund investment, as compared to $19.1 million in cash and cash equivalents and $22.6 million in the mutual fund investment at December 31, 2017. Our cash and cash equivalents are highly liquid investments with maturities of 90 days or less at the date of purchase, consist of money market funds, and are stated at cost, which approximates fair value. Our short-term marketable securities consist of a managed income mutual fund investing mainly in short-term investment grade, U.S.-dollar denominated fixed and floating-rate debt. All of our cash held outside of the United States is available for corporate use, with the exception of $4.4 million held by subsidiaries in jurisdictions for which earnings are planned to be permanently reinvested.

 

On July 25, 2017, our Board of Directors approved a stock repurchase program under which the Company was authorized to repurchase up to $7.5 million of its common stock. This program expired on July 25, 2018. We did not make any repurchases under this program.

 

On February 14, 2019, our Board of Directors authorized the repurchase of up to $10.0mm of the Company’s common stock through transactions on the open market, in privately negotiated purchases or otherwise. The repurchase program may be suspended or discontinued at any time and will conclude on February 14, 2020, unless extended by the Board. As of March 6, 2019 we had not made any repurchases under this program.

 

Operating and Capital Expenditure Requirements

 

We require cash to pay our operating expenses, make capital expenditures, and pay our long-term liabilities. Since our inception, we have funded our operations through public offerings and private placements of equity securities, short-term and long-term borrowings, and funds generated from our operations.

 

We recognized operating income of $28.2 million for the year ended December 31, 2018, $21.1 million for the year ended December 31, 2017 and $16.3 million for the year ended December 31, 2016. We expect to fund any increased costs and expenditures from our existing cash and cash equivalents, though our future capital requirements depend on numerous factors. These factors include, but are not limited to, the following:

 

 

the revenues generated by product sales;

 

 

payments associated with potential future quarterly cash dividends to our common stockholders;

 

 

payments associated with our stock repurchase program;

 

 

future acquisition-related payments;

 

 

payments associated with U.S income and other taxes;

 

 

the costs associated with expanding our manufacturing, marketing, sales, and distribution efforts;

 

 

the costs associated with our initiatives to sell direct-to-hospital in new countries;

 

 

the costs of obtaining and maintaining FDA and other regulatory clearances of our existing and future products; and

 

 

the number, timing, and nature of acquisitions and other strategic transactions.

 

Our cash balances may decrease as we continue to use cash to fund our operations, make acquisitions, make payments under our quarterly dividend program, repurchase shares of our common stock and make deferred payments related to prior acquisitions. We believe that our cash, cash equivalents, investments and the interest we earn on these balances will be sufficient to meet our anticipated cash requirements for at least the next twelve months. If these sources of cash are insufficient to satisfy our liquidity requirements beyond the next twelve months, we may seek to sell additional equity or debt securities or borrow funds from, or establish a revolving credit facility, with a financial institution. The sale of additional equity and debt securities may result in dilution to our stockholders. If we raise additional funds through the issuance of debt securities, such securities could have rights senior to those of our common stock and could contain covenants that would restrict our operations and possibly our ability to pay dividends. We may require additional capital beyond our currently forecasted amounts. Any such required additional capital may not be available on reasonable terms, if at all.

 

40

 

 

Cash Flows

 

   

Year ended December 31,

 
   

2018

   

2017

   

2016

 
   

($ in thousands)

 

Cash and cash equivalents

  $ 26,318     $ 19,096     $ 24,288  
                         

Cash flows provided by (used in):

                       

Operating activities

  $ 19,506     $ 22,868     $ 16,896  

Investing activities

    (7,055 )     (28,958 )     (17,211 )

Financing activities

    (4,416 )     80       (2,577 )

 

 

Net cash provided by operating activities. Net cash provided by operating activities was $19.5 million for the year ended December 31, 2018, and consisted of $22.9 million net income, adjusted for non-cash items of $1.7 million (including primarily depreciation and amortization of $4.3 million, stock-based compensation of $2.3 million, provisions for inventory write-offs and doubtful accounts of $1.0 million, a benefit for deferred taxes of $2.2 million and gains on acquisitions and divestitures of $7.5 million), as well as working capital uses of $1.7 million. The net cash used for working capital was driven by increases in accounts receivable of $1.3 million, inventory of $4.3 million and other current assets of $0.4 million, offset by an increase in accounts payable and other liabilities of $4.3 million.

 

Net cash provided by operating activities was $22.9 million for the year ended December 31, 2017, and consisted of $17.2 million net income, adjusted for non-cash items of $7.3 million (including primarily depreciation and amortization of $4.1 million, stock-based compensation of $2.3 million, provisions for inventory write-offs and doubtful accounts of $0.6 million, and a provision for deferred taxes of $0.3 million), as well as working capital uses of $1.6 million. The net cash used for working capital was driven by increases in accounts receivable of $1.5 million, inventory of $1.3 million and other current assets of $0.3 million, offset by an increase in accounts payable and other liabilities of $1.5 million.

 

Net cash provided by operating activities was $16.9 million for the year ended December 31, 2016, and consisted of $10.6 million net income, adjusted for non-cash items of $5.9 million (including depreciation and amortization of $3.6 million, stock-based compensation of $1.7 million, provisions for inventory write-offs and doubtful accounts of $0.5 million and provision for deferred taxes of $0.1 million), as well as changes in working capital of $0.4 million. The net cash provided by changes in working capital was driven by decreases in other current assets of $1.5 million, including primarily prepaid taxes, partially offset by increases in accounts receivable of $0.9 million and inventory of $0.1 million, and a decrease in accounts payable and other liabilities of $0.1 million.

 

Net cash used in investing activities. Net cash used in investing activities was $7.1 million for the year ended December 31, 2018, driven by cash paid for acquisitions of $12.3 million, as well as purchases of property and equipment of $3.1 million primarily associated with clean room build-outs at our Burlington, Massachusetts headquarters. These investments were in part offset by proceeds from the Reddick divestiture of $7.4 million and net sales of short-term investments of $0.9 million.

 

Net cash used in investing activities was $29.0 million for year ended December 31, 2017, driven by a $22.5 million purchase of a short-term investment, as well as purchases of property and equipment of $6.4 million primarily associated with the clean room build-outs at our Burlington, Massachusetts headquarters.

 

Net cash used in investing activities was $17.2 million for year ended December 31, 2016, driven by $14.4 million of cash paid in connection with our acquisitions of the ProCol biologic vascular graft and RestoreFlow allograft businesses, as well as purchases of property and equipment of $2.8 million primarily associated with the expansion of our Burlington, Massachusetts headquarters.

 

Net cash provided by (used in) financing activities. Net cash used in financing activities was $4.4 million for the year ended December 31, 2018, driven primarily by payments of common stock dividends of $5.4 million and payments related to our prior acquisitions of $1.2 million. We had proceeds from stock option exercises of $3.0 million, offset by the acquisition of $0.7 million of treasury shares to cover minimum withholding taxes on restricted stock unit vestings.

 

Net cash provided by financing activities was $0.1 million for the year ended December 31, 2017, driven primarily by proceeds from stock option exercises of $5.5 million, offset by the acquisition of $0.8 million of treasury shares to cover minimum withholding taxes on restricted stock unit vestings and by payments of common stock dividends of $4.2 million. We also made payments related to our prior acquisitions of $0.4 million.

 

Net cash used in financing activities was $2.6 million for the year ended December 31, 2016, driven primarily by payments of common stock dividends of $3.3 million, partially offset by proceeds from stock option exercise, net of shares repurchased for taxes, of $1.1 million. We also made payments related to our prior acquisitions of $0.4 million.

 

41

 

 

Dividends. In February 2011, our Board of Directors approved a policy for the payment of quarterly cash dividends on our common stock. Future declarations of quarterly dividends and the establishment of future record and payment dates are subject to approval by our Board of Directors on a quarterly basis. The dividend activity for the periods presented is as follows:

 

Record Date

 

Payment Date

 

Per Share Amount

   

Dividend Payment

 
               

(in thousands)

 

Fiscal Year 2018

                   

March 22, 2018

 

April 5, 2018

  $ 0.070     $ 1,351  

May 22, 2018

 

June 7, 2018

  $ 0.070     $ 1,353  

August 22, 2018

 

September 6, 2018

  $ 0.070     $ 1,369  

November 20, 2018

 

December 6, 2018

  $ 0.070     $ 1,372  
                     
                     

Fiscal Year 2017

                   

March 22, 2017

 

April 6, 2017

  $ 0.055     $ 1,029  

May 24, 2017

 

June 8, 2017

  $ 0.055     $ 1,036  

August 23, 2017

 

September 6, 2017

  $ 0.055     $ 1,055  

November 22, 2017

 

December 7, 2017

  $ 0.055     $ 1,060  

 

On February 14, 2019, our Board of Directors approved a quarterly cash dividend on our common stock of $0.085 per share payable on April 5, 2019, to stockholders of record at the close of business on March 22, 2019, which will total approximately $1.7 million.

 

Contractual obligations. Our principal contractual obligations consist of operating leases and inventory purchase commitments. The following table summarizes our commitments under operating leases as of December 31, 2018:

 

           

Less

                   

More

 
           

than

    1-3     3-5    

than

 

Contractual obligations

 

Total

   

1 year

   

years

   

years

   

5 years

 
   

(in thousands)

 

Operating leases

  $ 7,435     $ 1,826     $ 3,053     $ 2,556     $ -  
                                         

Inventory purchase commitments

  $ 2,195     $ 2,072     $ 123     $ -     $ -  

 

 

The commitments under our operating leases consist primarily of lease payments for our corporate headquarters and manufacturing facility in Burlington, Massachusetts, expiring in 2023, our Sulzbach, Germany office, expiring in 2023, our Vaughan, Canada office expiring in 2023, our Tokyo, Japan office, expiring in 2022; and our Shanghai, China office, expiring in 2020. They also include automobile leases.

 

We also have inventory purchase commitments of approximately $2.2 million as of December 31, 2018. These commitments are for product used in operations in the normal course of business and do not represent excess commitments or loss contracts.

 

Critical Accounting Policies and Estimates

 

We have adopted various accounting policies to prepare our consolidated financial statements in accordance with U.S. generally accepted accounting principles (GAAP). Our most significant accounting policies are described in Note 1 to our consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The preparation of our consolidated financial statements in conformity with GAAP requires us to make estimates and assumptions that affect the amounts reported in our consolidated financial statements and accompanying notes. Our estimates and assumptions, including those related to bad debts, inventories, intangible assets, sales returns and discounts, and income taxes are reviewed on an ongoing basis and updated as appropriate. Actual results could differ from those estimates.

 

Certain of our more critical accounting policies require the application of significant judgment by management in selecting the appropriate assumptions for calculating financial estimates. By their nature, these judgments are subject to an inherent degree of uncertainty. These judgments are based on our historical experience, terms of existing contracts, and observance of trends in the industry, as appropriate. Different, reasonable estimates could have been used in the current period. Additionally, changes in accounting estimates are reasonably likely to occur from period to period. Both of these factors could have a material impact on the presentation of our financial condition, changes in financial condition, or results of operations.

 

42

 

We believe that the following financial estimates and related accounting policies are both important to the portrayal of our financial condition and results of operations and require subjective or complex judgments. Further, we believe that the items discussed below are properly recorded in our consolidated financial statements for all periods presented. Management has discussed the development, selection and disclosure of our most critical financial estimates with the audit committee of our board of directors and our independent registered public accounting firm. The judgments about those financial estimates are based on information available as of the date of our consolidated financial statements. Those financial estimates and related policies include:

 

Revenue Recognition

 

Our revenue is derived primarily from the sale of disposable or implantable devices used during vascular surgery. We sell primarily directly to hospitals, and to a lesser extent to distributors. We also occasionally enter into consigned inventory arrangements with either hospitals or distributors on a limited basis. Following our acquisition of the RestoreFlow allograft business, we also derive revenues from human tissue cryopreservation services. These service revenues are recognized when services have been provided and the tissue has been shipped to the customer, provided all other revenue recognition criteria discussed below have been met.

 

On January 1, 2018 we adopted the provisions of ASU 2014-09, Revenue from Contracts with Customers (Topic 606). We used the modified retrospective method of adoption under which the comparative information was not restated and will continue to be reported under the standard in effect for those periods. The adoption of this standard was not material to our financial statements and there was no cumulative effect adjustment to the opening balance of retained earnings required. The core principle of Topic 606 is that an entity should recognize revenue to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The standard explains that to achieve the core principle, an entity should take the following actions:

 

Step 1: Identify the contract with a customer

 

Step 2: Identify the performance obligations in the contract

 

Step 3: Determine the transaction price

 

Step 4: Allocate the transaction price

 

Step 5: Recognize revenue when or as the entity satisfies a performance obligation

 

Revenue is recognized when or as a company satisfies a performance obligation by transferring a promised good or service to a customer (which is when the customer obtains control of that good or service). In instances in which shipping and handling activities are performed after a customer takes control of the goods (such as when title passes upon shipment from our dock), we have made the policy election allowed under Topic 606 to account for these activities as fulfillment costs and not as performance obligations.

 

We generally reference customer purchase orders to determine the existence of a contract. Orders that are not accompanied by a purchase order are confirmed with the customer in writing or verbally. The purchase orders or similar correspondence, once accepted, identify the performance obligations as well as the transaction price, and otherwise outline the rights and obligations of each party. We allocate the transaction price of each contract among the performance obligations in accordance with the pricing of each item specified on the purchase order, which is in turn based on standalone selling prices per our published price lists. In cases where we discount products or provide certain items free of charge, we allocate the discount proportionately to all performance obligations, unless it can be demonstrated that the discount should be allocated entirely to one or more, but not all, of the performance obligations.

 

We recognize revenue, net of allowances for returns and discounts, fees paid to group purchasing organizations, and any sales and value added taxes required to be invoiced, which we have elected to exclude from the measurement of the transaction price as allowed by the standard, at the time of shipment (taking into consideration contractual shipping terms), or in the case of consigned inventory, when it is consumed. Shipment is the point at which control of the product and title passes to our customers, and at which LeMaitre has a present right to receive payment for the goods.

 

43

 

Below is a disaggregation of our revenue by major geographic area, which is one of the primary categorizations used by management in evaluating financial performance, for the periods indicated (in thousands):

 

   

Year ended December 31,

 
   

2018

   

2017

 

Americas

  $ 63,649     $ 62,696  

Europe, Middle East and Africa

    35,319       32,517  

Asia/Pacific Rim

    6,600       5,654  

Total

  $ 105,568     $ 100,867  

 

 

Except as discussed in Note 6 to our consolidated financial statements, we do not carry any contract assets or contract liabilities, as there are generally no unbilled amounts due from customers under contracts for which we have partially satisfied performance obligations, or amounts received from customers for which we have not satisfied performance obligations. We satisfy our performance obligations under revenue contracts within a short time period from receipt of the orders, and payments from customers are typically received within 30 to 60 days of fulfillment of the orders, except in certain geographies such as Spain and Italy where the payment cycle is customarily longer. Accordingly, there is no significant financing component to our revenue contracts. Additionally, we have elected as a policy that incremental costs (such as commissions) incurred to obtain contracts are expensed as incurred, due to the short-term nature of the contracts.

 

 

Customers returning products may be entitled to full or partial credit based on the condition and timing of the return. To be accepted, a returned product must be unopened (if sterile), unadulterated, and undamaged, must have at least 18 months remaining prior to its expiration date, or twelve months for our hospital customers in Europe, and generally be returned within 30 days of shipment. These return policies apply to sales to both hospitals and distributors. The amount of products returned to us, either for exchange or credit, has not been material. Nevertheless, we provide for an allowance for future sales returns based on historical return experience, which requires judgment. Our cost of replacing defective products has not been material and is accounted for at the time of replacement.

 

Accounts Receivable

 

Our accounts receivable are with customers based in the United States and internationally. Accounts receivable generally are due within 30 to 90 days of invoice and are stated at amounts due from customers, net of an allowance for doubtful accounts and sales returns, other than in certain European markets where longer payment terms are customary and may range from 90 to 240 days. We perform ongoing credit evaluations of the financial condition of our customers and adjust credit limits based upon payment history and the current creditworthiness of the customers, as determined by a review of their current credit information. We continuously monitor aging reports, collections, and payments from customers, and maintain a provision for estimated credit losses based upon historical experience and any specific customer collection issues we identify.

 

 

We closely monitor outstanding receivables for potential collection risks, including those that may arise from economic conditions, in both the U.S. and international economies. Our European sales to government-owned or supported customers such as hospitals, distributors and agents in Italy and Spain may be subject to significant payment delays due to government austerity measures impacting funding and payment practices. As of December 31, 2018 our receivables in Italy and Spain totaled $1.0 million and $0.7 million, respectively. Receivables balances with certain publicly-owned hospitals and government supported customers in these countries can accumulate over a period of time and then subsequently be settled as large lump sum payments. While we believe our allowance for doubtful accounts in these countries is adequate as of December 31, 2018, if significant changes were to occur in Italy’s or Spain’s payment practices or if government funding becomes unavailable, we may not be able to collect on receivables due to us from these customers and our write offs of uncollectible amounts may increase.

 

We write off accounts receivable when they become uncollectible. While such credit losses have historically been within our expectations and allowances, we cannot guarantee the same credit loss rates will be experienced in the future. The allowance for doubtful accounts is our best estimate of the amount of probable credit losses in our existing accounts receivable. We review our allowance for doubtful accounts on a monthly basis and all past due balances are reviewed individually for collectability. The provision for the allowance for doubtful accounts is recorded in general and administrative expenses.

 

Inventory and Other Deferred Costs

 

Inventory consists of finished products, work-in-process, and raw materials. We value inventory at the lower of cost or market value. Cost includes materials, labor, and manufacturing overhead and is determined using the first-in, first-out (FIFO) method. On a quarterly basis, we review inventory quantities on hand and analyze the provision for excess and obsolete inventory based primarily on product expiration dating and our estimated sales forecast, which is based on sales history and anticipated future demand. Our estimates of future product demand may not be accurate, and we may understate or overstate the provision required for excess and obsolete inventory. Accordingly, any significant unanticipated changes in demand could have a significant impact on the value of our inventory and results of operations.

 

44

 

In connection with our RestoreFlow allograft business, other deferred costs include costs incurred for the preservation of human vascular tissues available for shipment, tissues currently in active processing, and tissues held in quarantine pending release to implantable status. By federal law human tissues cannot be bought or sold. Therefore, the tissues we preserve are not held as inventory, and the costs we incur to procure and process human vascular tissues are instead accumulated and deferred.

 

Stock-based Compensation

 

We recognize, as expense, the estimated fair value of stock options to employees which is determined using the Black-Scholes option pricing model. We have elected to recognize the compensation cost of all share-based awards on a straight-line basis over the vesting period of the award. In periods that we grant stock options, fair value assumptions are based on volatility, interest rates, dividend yield, and expected term over which the stock options will be outstanding. The computation of expected volatility is based on the historical volatility of the company’s stock. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury risk-free interest rate in effect at the time of grant. Historical data on exercise patterns is the basis for estimating the expected life of an option. The expected annual dividend rate was calculated by dividing our annual dividend, based on the most recent quarterly dividend rate, by the closing stock price on the grant date.

 

We also issue restricted stock units (RSUs) as an additional form of equity compensation to our employees, officers, and directors, pursuant to our stockholder-approved Second Amended and Restated 2006 Stock Option and Incentive Plan. RSUs entitle the grantee to an issuance of stock at no cost and generally vest over a period of time determined by our Board of Directors at the time of grant based upon the continued service to the company. The fair market value of the award is determined based on the number of RSUs granted and the market value of our common stock on the grant date and is amortized to expense over the period of vesting. Unvested RSUs are forfeited and canceled as of the date that employment or service to the company terminates. RSUs are settled in shares of our common stock upon vesting. We may repurchase common stock upon our employees’ vesting in RSUs in order to cover any minimum tax withholding liability as a result of the RSUs having vested.

 

As disclosed more fully in the notes to our consolidated financial statements, we recorded expense of approximately $2.3 million in connection with share-based payment awards for the year ended December 31, 2018. The future expense of non-vested share-based awards of approximately $9.7 million is to be recognized over a weighted-average period of 3.8 years. During 2018, we granted stock options at a weighted average fair value of $8.28 and RSUs with weighted average fair value of $23.65. Share-based compensation charges are recorded across the consolidated statement of operations based upon the grantee’s primary function.

 

Valuation of Goodwill, and Other Intangibles

 

Goodwill represents the amount of consideration paid in connection with business acquisitions in excess of the fair value of assets acquired and liabilities assumed. Goodwill is evaluated for impairment annually or more frequently if indicators of impairment are present or changes in circumstances suggest that an impairment may exist. Our assessment is performed as of December 31 each year based on a single reporting unit. We first perform an assessment of qualitative factors to determine if it is “more likely than not” that the fair value of our reporting unit is less than its carrying value as a basis for determining whether it is necessary to perform the two-step goodwill impairment test. The “more likely than not” threshold is defined as having a likelihood of more than 50 percent. If required, the next step of the goodwill impairment test is to determine the fair value of the reporting unit. The implied fair value of goodwill is determined on the same basis as the amount of goodwill recognized in connection with a business combination. Specifically, the fair value of a reporting unit is allocated to all of the assets and liabilities (including any unrecognized intangible assets) as if the reporting unit had been acquired in a business combination as of the date of the impairment review and as if the fair value of the reporting unit was the price paid to acquire the reporting unit. The excess of the fair value of a reporting unit over the amounts assigned to its assets and liabilities is the implied fair value of goodwill. If the carrying amount of the reporting unit goodwill exceeds the implied fair value of that goodwill, an impairment loss shall be recognized in an amount equal to that excess. Goodwill was $29.9 million and $23.8 million as of December 31, 2018 and 2017, respectively. Our annual impairment testing indicated no significant risk of impairment based upon changes in value that are reasonably likely to occur. However, changes in these estimates and assumptions could materially affect the estimated fair value of our reporting unit.

 

Other intangible assets consist primarily of purchased developed technology, patents, customer relationships and trademarks, and are amortized over their estimated useful lives, ranging from 2 to 16 years. We review intangible assets quarterly to determine if any adverse conditions exist for a change in circumstances has occurred that would indicate impairment. Conditions that may indicate impairment include, but are not limited to, a significant adverse change in legal factors or business climate that could affect the value of the asset, a change in the operating cash flows associated with the asset, or adverse action or assessment by a regulator. If an impairment indicator exists we test the intangible asset for recoverability. If the carrying value of the intangible asset exceeds the undiscounted cash flows expected to result from the use and eventual disposition of the intangible asset, we will write the carrying value down to the fair value in the period in which it is identified. We generally calculate the fair value of our intangible assets as the present value of estimated future cash flows we expect to generate from the asset using a risk-adjusted discount rate. In determining our estimated future cash flows associated with our intangible assets, we use estimates and assumptions about future revenue contributions, cost structures, and remaining useful lives of the asset. These estimates and assumptions require significant judgment and actual results may differ from assumed or estimated amounts. Other intangible assets, net of accumulated amortization, were $13.7 million as of December 31, 2018 and $8.2 million as of December 31, 2017.

 

45

 

Contingencies

 

In the normal course of business, we are subject to proceedings, lawsuits, and other claims and assessments for matters related to, among other things, business acquisitions, employment, commercial matters, intellectual property matters, product liability and product recalls. We assess the likelihood of any adverse judgments or outcomes to these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is made after careful analysis of each individual issue. The required reserves may change in the future due to new developments in each matter or changes in approach such as a change in settlement strategy in dealing with these matters. We record charges for the costs we anticipate incurring in connection with litigation and claims against us when we determine a loss is probable and we can reasonably estimate these costs. During the years ended December 31, 2018, 2017, and 2016, we were not subject to any material litigation, claims or assessments.

 

Income Taxes

 

As part of the process of preparing our consolidated financial statements we are required to determine our income taxes in each of the jurisdictions in which we operate. This process involves estimating our actual current tax expense together with assessing temporary differences resulting from recognition of items for income tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be recovered from taxable income during the carryback period or in the future; and to the extent we believe that recovery is not likely, we must establish a valuation allowance. To the extent we establish a valuation allowance or increase this allowance in a period, we must reflect this increase as an expense within the tax provision in the statement of operations.

 

We recognize, measure, present and disclose in our financial statements, uncertain tax positions that we have taken or expect to take on a tax return. We operate in multiple taxing jurisdictions, both within the United States and outside of the United States and may be subject to audits from various tax authorities regarding transfer pricing, the deductibility of certain expenses, intercompany transactions, and other matters. Management’s judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities, liabilities for uncertain tax positions, and any valuation allowance recorded against our net deferred tax assets.

 

Our policy is to classify interest and penalties related to unrecognized tax benefits as income tax expense.

 

Recent Accounting Pronouncements

 

In August 2018, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (ASU) 2018-15, Intangibles—Goodwill and Other—Internal-Use Software (Subtopic 350-40), which aligns the requirements for capitalizing implementation costs incurred in a hosting arrangement that is a service contract with the requirements for capitalizing implementation costs incurred to develop or obtain internal-use software (and hosting arrangements that include an internal-use software license). The new standard is effective for us beginning January 1, 2020, with early adoption permitted. The adoption of this standard is not expected to have a material impact on our financial statements.

 

In August 2018, the FASB issued ASU 2018-13 Fair Value Measurement (Topic 820), which modifies the disclosure requirements for fair value measurements. The new standard is effective for us beginning January 1, 2020, with early adoption permitted. The adoption of this standard is not expected to have a material impact on our financial statements.

 

In February 2018, the FASB issued ASU 2018-02, Income Statement – Reporting Other Comprehensive Income (Topic 220), which allows a reclassification from accumulated other comprehensive income to retained earnings for stranded tax effects resulting from the Tax Cuts and Jobs Act. Consequently, the amendments eliminate the stranded tax effects resulting from the Tax Cuts and Jobs Act and is expected to improve the usefulness of information reported to financial statement users. However, because the amendments only relate to the reclassification of the income tax effects of the Tax Cuts and Jobs Act, the underlying guidance that requires that the effect of a change in tax laws or rates be included in income from continuing operations is not affected. The amendments in this ASU also require certain disclosures about stranded tax effects. The new standard is effective for us beginning January 1, 2019, with early adoption permitted. The adoption of this standard is not expected to have a material impact on our financial statements.

 

In January 2017, the FASB issued ASU 2017-04, which, among other provisions, eliminates “step 2” from the goodwill impairment test. The annual, or interim, goodwill impairment test will be performed by comparing the fair value of a reporting unit with its carrying amount. An impairment charge should be recognized for the amount by which the carrying amount exceeds the reporting unit’s fair value; however, the loss recognized should not exceed the total amount of goodwill allocated to that reporting unit. The new standard is effective for us beginning January 1, 2020, with early adoption permitted. The adoption of this standard is not expected to have a material impact on our financial statements.

 

46

 

In February 2016, the FASB issued its new lease accounting guidance in ASU No. 2016-02, Leases (Topic 842), subsequently amended by ASU 2018-11, Leases (Topic 842): Targeted Improvements. Under the new guidance, lessees will be required to recognize the following for all leases (with the exception of short-term leases) at the commencement date: a lease liability, which is a lessee’s obligation to make lease payments arising from a lease, measured on a discounted basis; and a right-of-use asset, which is an asset that represents the lessee’s right to use, or control the use of, a specified asset for the lease term. Lessees will no longer be provided with a source of off-balance sheet financing. The new lease guidance also simplifies the accounting for sale and leaseback transactions primarily because lessees must recognize lease assets and lease liabilities. The standard is effective for public companies for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years (i.e., January 1, 2019, for a calendar year entity). Early application is permitted. Entities have the option of using either a modified retrospective approach for leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements, or else a transition option (which we currently expect to use) allowing lessees to not apply the new lease standard in comparative periods but instead recognize a cumulative-effect adjustment to retained earnings as of the date of adoption. The modified retrospective approach would not require any transition accounting for leases that expired before the earliest comparative period presented. Lessees and lessors may not apply a full retrospective transition approach. Our assessment of the impact of adopting this standard is nearly complete, and included cataloging all of our leases, performing an analysis of the amounts of lease liabilities and right-of-use assets to be recorded and reviewing potential changes to our disclosures on leases. Based on this assessment we do not expect the adoption of this standard to have a significant impact on our consolidated statement of operations. However, we expect that the recognition of right-of-use assets and corresponding lease liabilities will have a significant impact on our consolidated balance sheet, adding between $6.1 million and $6.7 million to our total assets, and between $6.6 million and $7.2 million to our total liabilities, depending primarily on the discount rate selected.

 

 

 

Off-Balance Sheet Arrangements

 

We did not have any off-balance sheet arrangements as of December 31, 2018. We do not currently have, nor have we ever had, any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts. As a result, we are not materially exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in these relationships.

 

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

 

In the ordinary course of conducting business, we are exposed to certain risks associated with potential changes in market conditions. These market risks include changes in currency exchange rates and interest rates which could affect operating results, financial position and cash flows.

 

Foreign Currency Risk

 

During fiscal 2018 and 2017, 44% and 42%, respectively, of our total revenue was from customers outside of the United States. In addition, a significant portion of our operating costs incurred outside the United States are denominated in currencies other than the U.S. dollar. We conduct business on a worldwide basis and as a result, a portion of our revenue, earnings, net assets, and net investments in foreign affiliates is exposed to changes in foreign currency exchange rates. We measure our net exposure for cash balance positions and for cash inflows and outflows in order to evaluate the need to mitigate our foreign exchange risk. We may enter into foreign currency forward contracts to minimize the impact related to unfavorable exchange rate movements, although we have not done so during fiscal 2018 and fiscal 2017. Our largest exposures to foreign currency exchange rates exist primarily with the Euro, British pound, Canadian dollar, Australian dollar and Japanese yen.

 

During the years ended December 31, 2018 and 2017, we recorded $0.4 million and $0.2 million of net foreign currency exchange losses, respectively, related to the settlement and remeasurement of transactions denominated in currencies other than the functional currency of our operating subsidiaries. Our analysis of operating results transacted in various foreign currencies indicated that a hypothetical 10% change in the foreign currency exchange rates could have increased or decreased the consolidated results of operations by approximately $1.9 million for 2018.

 

47

 

 

Interest Rate Risk

 

At December 31, 2018, we held $26.3 million in cash and cash equivalents and $21.7 million in a short-term managed income mutual fund investment. Due to the short maturities on any instruments held, a hypothetical 10% increase or decrease in interest rates would not have a material impact on our financial position, results of operations or cash flows.

 

Item 8.

Financial Statements and Supplementary Data

 

See the consolidated financial statements filed as part of this Annual Report on Form 10-K as listed under Item 15 below, which are incorporated by reference herein.

 

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

Not Applicable.

 

48

 

Item 9A.

Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

Our management, with the participation and supervision of our Chief Executive Officer and Chief Financial Officer, is responsible for our disclosure controls and procedures pursuant to Rules 13a-15(e) and 15d-15(e) under the Exchange Act. Disclosure controls and procedures are controls and other procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified under SEC rules and forms. Disclosure controls and procedures include controls and procedures designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is accumulated and communicated to our principal executive officer and our principal financial officer, as appropriate, to allow timely decisions regarding required disclosure. We design our disclosure controls and procedures to ensure, at reasonable assurance levels, that such information is timely recorded, processed, summarized and reported, and then accumulated and communicated appropriately.

 

Based on an evaluation of our disclosure controls and procedures as of December 31, 2018, our Chief Executive Officer and Chief Financial Officer concluded that, as of such date, our disclosure controls and procedures were effective at reasonable assurance levels.

 

Management’s Report on Internal Control Over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with GAAP.

 

Management assessed the effectiveness of our internal controls over financial reporting as of December 31, 2018. Management based its assessment on criteria established in the Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework). Management’s assessment included evaluation of elements such as the design and operating effectiveness of key financial reporting controls, process documentation, accounting policies, and our overall control environment.

 

Based on this assessment under the criteria set forth in the Internal Control — Integrated Framework, management has concluded that our internal control over financial reporting was effective as of December 31, 2018.

 

 

Our internal control over financial reporting as of December 31, 2018 has been audited by Grant Thornton LLP, an independent registered public accounting firm, as stated in their respective report which is included herein.

 

Changes in Internal Control over Financial Reporting

 

There was no change in our internal control over financial reporting that occurred during the fiscal quarter ended December 31, 2018 that has materially affected, or is reasonably likely to materially affect our internal control over financial reporting.

 

Inherent Limitations of Internal Controls

 

Notwithstanding the foregoing, our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal controls will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, control may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

 

49

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

LeMaitre Vascular, Inc.

 

Opinion on internal control over financial reporting

We have audited the internal control over financial reporting of LeMaitre Vascular, Inc. (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2018, based on criteria established in the 2013 Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2018, based on criteria established in the 2013 Internal Control—Integrated Framework issued by COSO.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated financial statements of the Company as of and for the year ended December 31, 2018, and our report dated March 11, 2019 expressed an unqualified opinion on those financial statements.

 

Basis for opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

Definition and limitations of internal control over financial reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

/s/ GRANT THORNTON LLP

 

Westborough, Massachusetts

March 11, 2019

 

 

 

 

Item 9B.

Other Information

 

Not Applicable.

 

50

 

 

PART III

 

Item 10.

Directors, Executive Officers and Corporate Governance

 

The information responsive to this item is incorporated by reference herein from the information to be contained in the sections entitled “Directors, Executive Officers and Key Employees,” “Corporate Governance,” and “Meetings and Committees of the Board of Directors” in our 2019 definitive proxy statement (2019 Definitive Proxy Statement) for the 2019 annual meeting of stockholders to be filed with the Securities and Exchange Commission within 120 days after the fiscal year ended December 31, 2018.

 

The information required by this item concerning compliance with Section 16(a) of the Exchange Act is incorporated herein by reference from the information contained in the section entitled “Section 16(a) Beneficial Ownership Reporting Compliance” in our 2019 Definitive Proxy Statement.

 

Code of Ethics

 

Certain documents relating to our corporate governance, including our Code of Business Conduct and Ethics, which is applicable to our directors, officers, and employees, and the charters of the Audit Committee, Compensation Committee, and Corporate Governance and Nominating Committee of our Board of Directors, are available on our website at http://www.lemaitre.com. We intend to disclose substantive amendments to or waivers (including implicit waivers) of any provision of the Code of Business Conduct and Ethics that apply to our principal executive officer, principal financial officer, principal accounting officer, or controller, or persons performing similar functions, by posting such information on our website available at http://www.lemaitre.com.

 

Item 11.

Executive Compensation

 

The information responsive to this item is incorporated herein by reference from the information to be contained in the section entitled “Compensation of Executive Officers and Directors” in our 2019 Definitive Proxy Statement.

 

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

 

The information responsive to this item is incorporated herein by reference from the information to be contained in the section entitled “Security Ownership of Certain Beneficial Owners and Management” in our 2019 Definitive Proxy Statement.

 

Equity Compensation Plan Information

 

The following table sets forth information regarding our equity compensation plans in effect as of December 31, 2018. Each of our equity compensation plans is an “employee benefit plan” as defined by Rule 405 of Regulation C of the Securities Act of 1933, as amended.

 

Plan category

 

Number of securities

to be issued upon

exercise of

outstanding options,

warrants and rights

   

Weighted-average

exercise price of

outstanding options,

warrants and rights

   

Number of securities

remaining available

for future issuance

under equity

compensation plans,

excluding securities

reflected in column

(a)

 
                         
   

(a)

   

(b)

   

(c)

 

Equity compensation plans approved by security holders

    1,680,470     $ 17.03       1,212,644  

Equity compensation plans not approved by security holders

    -       -       -  

Total

    1,680,470     $ 17.03       1,212,644  

 

 

 

 

Item 13.

Certain Relationships and Related Transactions, and Director Independence

 

The information required responsive to this item is incorporated herein by reference from the information to be contained in the sections entitled “Certain Relationships and Related Transactions” and “Corporate Governance” in our 2019 Definitive Proxy Statement.

 

51

 

Item 14.

Principal Accounting Fees and Services

 

The information responsive to this item is incorporated herein by reference from the information to be contained in the sections entitled “Ratification of Independent Registered Public Accounting Firm” and “Additional Information Regarding Our Independent Registered Public Accounting Firm” in our 2019 Definitive Proxy Statement.

 

PART IV

 

Item 15.

Exhibits and Financial Statement Schedules

 

a)

Documents filed as part of this Report.

 

 

(1)

The following consolidated financial statements are filed herewith in Item 8 of Part II above.

 

 

(i)

Report of Independent Registered Public Accounting Firm

 

 

(ii)

Consolidated Balance Sheets

 

 

(iii)

Consolidated Statements of Operations

 

 

(iv)

Consolidated Statements of Changes in Stockholders’ Equity

 

 

(v)

Consolidated Statements of Comprehensive Income

 

 

(vi)

Consolidated Statements of Cash Flows

 

 

(vii)

Notes to Consolidated Financial Statements

 

 

(2)

All financial statement schedules are omitted because they are not applicable or the required information is shown in the financial statements or notes thereto.

 

 

(3)

Exhibits

 


 

 

 

 

Incorporated By Reference 

 

 

 

Exhibit
Number
  Exhibit Description  

Form 

 

Date 

 

SEC File
Number
 

  Filed
Herewith
 
                     

2.1

 

Asset Purchase Agreement dated November 10, 2016 between Registrant, Restore Flow Allografts, LLC and certain individuals named therein.

 

10-K

 

3/9/18

 

001-33092

   
                     

2.2

 

Asset Purchase Agreement dated September 20, 2018 between Registrant and Applied Medical Resources Corporation

 

10-Q

 

11/2/2018

 

001-33092

   
                     

3.1

 

Amended and Restated By-laws of the Registrant

 

S-1/A

 

5/26/06

 

333-133532

 

 

                     

3.2

 

Second Amended and Restated Certificate of Incorporation of the Registrant

 

10-K

 

3/29/10

 

001-33092

 

 

                     

3.3

 

Amendment to Second Amended and Restated Certificate of Incorporation of the Registrant

 

8-K

 

6/15/12

 

001-33092

 

 

                     

4.1

 

Specimen Certificate evidencing shares of common stock

 

S-1/A

 

6/22/06

 

333-133532

 

 

 

52

 


 

 

 

 

Incorporated By Reference 

 

 

 

Exhibit
Number
  Exhibit Description  

Form 

 

Date 

 

SEC File
Number
 

  Filed
Herewith
 
                     

10.1

 

Northwest Park Lease dated March 31, 2003, by and between the Registrant and Roger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, as amended

 

S-1

 

4/25/06

 

333-133532

 

 

                     

10.2

 

Director Compensation Policy

 

10-K

 

3/27/12

 

001-33092

 

 

                     

10.3†

 

Executive Retention and Severance Agreement dated October 10, 2005, by and between the Registrant and George W. LeMaitre

 

S-1/A

 

5/26/06

 

333-133532

 

 

                     

10.4†

 

Employment Agreement dated June 20, 2006, by and between the Registrant and David Roberts

 

S-1/A

 

6/22/06

 

333-133532

 

 

                     

10.5†

 

Employment Agreement dated April 20, 2006, by and between the Registrant and Joseph P. Pellegrino

 

S-1/A

 

6/22/06

 

333-133532

 

 

                     

10.6†

 

Form of Indemnification Agreement between the Registrant and its directors and executive officers

 

S-1/A

 

5/26/06

 

333-133532

 

 

                     

10.7

 

Second Amendment of Lease dated May 21, 2007, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant

 

8-K

 

6/15/07

 

001-33092

 

 

                     

10.8

 

Third Amendment of Lease dated February 26, 2008, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant

 

8-K

 

4/10/08

 

001-33092

 

 

                     

10.9

 

Fourth Amendment of Lease dated October 31, 2008, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant

 

10-K

 

3/31/09

 

001-33092

 

 

                     

10.10†

 

First Amendment to Executive Retention and Severance Agreement dated December 23, 2008, by and between the Registrant and George W. LeMaitre

 

10-K

 

3/31/09

 

001-33092

 

 

                     

10.11†

 

First Amendment to Employment Agreement dated December 19, 2008, by and between the Registrant and David Roberts

 

10-K

 

3/31/09

 

001-33092

 

 

                     

10.12†

 

First Amendment to Employment Agreement dated December 19, 2008, by and between the Registrant and Joseph P. Pellegrino

 

10-K

 

3/31/09

 

001-33092

 

 

                     

10.13

 

Fifth Amendment of Lease dated March 23, 2010, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant

 

10-K

 

3/29/10

 

001-33092

 

 

 

 

53

 


 

 

 

 

Incorporated By Reference 

 

 

 

Exhibit
Number
  Exhibit Description  

Form 

 

Date 

 

SEC File
Number
 

  Filed
Herewith
 
 

10.14

 

Northwest Park Lease dated March 23, 2010, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant

 

10-K

 

3/29/10

 

001-33092

 

 

                     

10.15

 

First Amendment to Northwest Park Lease dated September 14, 2010, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant

 

10-K

 

3/27/12

 

001-33092

 

 

                     

10.16

 

Second Amendment to Northwest Park Lease dated October 31, 2011, by and between NWP Building 4 LLC, as successor-in-interest to Trustees of Northwest Associates, and Registrant

 

10-K

 

3/27/12

 

001-33092

 

 

                     

10.17

 

Third Amendment of Northwest Park Lease dated August 31, 2012, by and between NWP Building 4 LLC, as successor-in-interest to Trustees of Northwest Associates, and Registrant

 

10-K

 

3/27/13

 

001-33092

 

 

                     

10.18

 

Lease dated December 20, 2013, by and between N.W. Building 3 Trust and Registrant

 

8-K

 

12/23/13

 

001-33092

 

 

                     

10.19

 

Fourth Amendment of Lease dated December 20, 2013, by and between NWP Building 4 LLC, as successor-in-interest to the Trustees of Northwest Associates, and Registrant

 

8-K

 

12/23/13

 

001-33092

 

 

                     

10.20

 

Sixth Amendment of Lease dated December 20, 2013, by and between NWP Building 5 LLC, as successor-in-interest to the Trustees of Northwest Associates, and Registrant

 

8-K

 

12/23/13

 

001-33092

 

 

                     

10.21†

 

Amended and Restated Management Incentive Compensation Plan

 

8-K

 

2/25/14

 

001-33092

 

 

                     

10.22†

 

Third Amended and Restated 2006 Stock Option and Incentive Plan

 

8-K

 

6/8/15

 

001-33092

 

 

                     

10.23†

 

Separation Agreement dated June 7, 2017 between Peter R. Gebauer and LeMaitre Vascular GmbH

 

10-Q

 

8/3/2017

 

001-33092

   
                     

10.24†

 

Transition and Employment Agreement dated June 7, 2017 between Peter R. Gebauer and the Registrant

 

10-Q

 

8/3/2017

 

001-33092

   
                     

10.25†

 

Form of Restricted Stock Unit Award Agreement under the LeMaitre Vascular, Inc. 2006 Stock Option And Incentive Plan

 

10-K

 

3/9/18

 

001-33092